/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
#include "../inc/MarlinConfigPre.h"
#ifdef LED_BACKLIGHT_TIMEOUT
#include "../feature/leds/leds.h"
#endif
// All displays share the MarlinUI class
#if HAS_DISPLAY
#include "../gcode/queue.h"
#include "ultralcd.h"
#include "fontutils.h"
MarlinUI ui;
#include "../sd/cardreader.h"
#if ENABLED(EXTENSIBLE_UI)
#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80u)
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../feature/host_actions.h"
#endif
#endif
#if HAS_SPI_LCD
#if ENABLED(STATUS_MESSAGE_SCROLLING)
uint8_t MarlinUI::status_scroll_offset; // = 0
constexpr uint8_t MAX_MESSAGE_LENGTH = max(LONG_FILENAME_LENGTH, MAX_LANG_CHARSIZE * 2 * (LCD_WIDTH));
#else
constexpr uint8_t MAX_MESSAGE_LENGTH = MAX_LANG_CHARSIZE * (LCD_WIDTH);
#endif
#elif ENABLED(EXTENSIBLE_UI)
constexpr uint8_t MAX_MESSAGE_LENGTH = 63;
#endif
#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
uint8_t MarlinUI::alert_level; // = 0
char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1];
#endif
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
uint8_t MarlinUI::progress_override; // = 0
#endif
#if HAS_BUZZER
#include "../libs/buzzer.h"
#if ENABLED(PCA9632_BUZZER)
#include "../feature/leds/pca9632.h"
#endif
void MarlinUI::buzz(const long duration, const uint16_t freq) {
#if ENABLED(LCD_USE_I2C_BUZZER)
lcd.buzz(duration, freq);
#elif ENABLED(PCA9632_BUZZER)
pca9632_buzz(duration, freq);
#elif USE_BEEPER
buzzer.tone(duration, freq);
#endif
}
#endif
#if HAS_SPI_LCD
#if HAS_GRAPHICAL_LCD
#include "dogm/ultralcd_DOGM.h"
#endif
#include "lcdprint.h"
#include "../sd/cardreader.h"
#include "../module/temperature.h"
#include "../module/planner.h"
#include "../module/printcounter.h"
#include "../module/motion.h"
#include "../Marlin.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../feature/power_loss_recovery.h"
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
#include "../feature/bedlevel/bedlevel.h"
#endif
#if HAS_TRINAMIC
#include "../feature/tmc_util.h"
#endif
#if HAS_ENCODER_ACTION
volatile uint8_t MarlinUI::buttons;
#if HAS_SLOW_BUTTONS
volatile uint8_t MarlinUI::slow_buttons;
#endif
#if ENABLED(TOUCH_BUTTONS)
#include "../feature/touch/xpt2046.h"
#endif
#endif
#if ENABLED(INIT_SDCARD_ON_BOOT)
uint8_t lcd_sd_status;
#endif
#if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS
bool MarlinUI::defer_return_to_status;
#endif
uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
#if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
millis_t MarlinUI::next_filament_display; // = 0
#endif
millis_t MarlinUI::next_button_update_ms; // = 0
#if HAS_GRAPHICAL_LCD
bool MarlinUI::drawing_screen, MarlinUI::first_page; // = false
#endif
// Encoder Handling
#if HAS_ENCODER_ACTION
uint16_t MarlinUI::encoderPosition;
volatile int8_t encoderDiff; // Updated in update_buttons, added to encoderPosition every LCD update
#endif
#if HAS_LCD_MENU
#include "menu/menu.h"
#include "../sd/cardreader.h"
#if ENABLED(SDSUPPORT)
#if ENABLED(SCROLL_LONG_FILENAMES)
uint8_t MarlinUI::filename_scroll_pos, MarlinUI::filename_scroll_max;
#endif
const char * MarlinUI::scrolled_filename(CardReader &theCard, const uint8_t maxlen, uint8_t hash, const bool doScroll) {
const char *outstr = theCard.longest_filename();
if (theCard.longFilename[0]) {
#if ENABLED(SCROLL_LONG_FILENAMES)
if (doScroll) {
for (uint8_t l = FILENAME_LENGTH; l--;)
hash = ((hash << 1) | (hash >> 7)) ^ theCard.filename[l]; // rotate, xor
static uint8_t filename_scroll_hash;
if (filename_scroll_hash != hash) { // If the hash changed...
filename_scroll_hash = hash; // Save the new hash
filename_scroll_max = _MAX(0, utf8_strlen(theCard.longFilename) - maxlen); // Update the scroll limit
filename_scroll_pos = 0; // Reset scroll to the start
lcd_status_update_delay = 8; // Don't scroll right away
}
outstr += filename_scroll_pos;
}
#else
theCard.longFilename[maxlen] = '\0'; // cutoff at screen edge
#endif
}
return outstr;
}
#endif
screenFunc_t MarlinUI::currentScreen; // Initialized in CTOR
#if ENABLED(ENCODER_RATE_MULTIPLIER)
bool MarlinUI::encoderRateMultiplierEnabled;
millis_t MarlinUI::lastEncoderMovementMillis = 0;
void MarlinUI::enable_encoder_multiplier(const bool onoff) {
encoderRateMultiplierEnabled = onoff;
lastEncoderMovementMillis = 0;
}
#endif
#if EITHER(REVERSE_MENU_DIRECTION, REVERSE_SELECT_DIRECTION)
int8_t MarlinUI::encoderDirection = ENCODERBASE;
#endif
#if ENABLED(TOUCH_BUTTONS)
uint8_t MarlinUI::repeat_delay;
#endif
bool MarlinUI::lcd_clicked;
float move_menu_scale;
bool MarlinUI::use_click() {
const bool click = lcd_clicked;
lcd_clicked = false;
return click;
}
#if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
bool MarlinUI::external_control; // = false
void MarlinUI::wait_for_release() {
while (button_pressed()) safe_delay(50);
safe_delay(50);
}
#endif
void _wrap_string(uint8_t &col, uint8_t &row, const char * const string, read_byte_cb_t cb_read_byte, bool wordwrap/*=false*/) {
SETCURSOR(col, row);
if (!string) return;
auto _newline = [&col, &row]() {
col = 0; row++; // Move col to string len (plus space)
SETCURSOR(0, row); // Simulate carriage return
};
uint8_t *p = (uint8_t*)string;
wchar_t ch;
if (wordwrap) {
uint8_t *wrd = nullptr, c = 0;
// find the end of the part
for (;;) {
if (!wrd) wrd = p; // Get word start /before/ advancing
p = get_utf8_value_cb(p, cb_read_byte, &ch);
const bool eol = !ch; // zero ends the string
// End or a break between phrases?
if (eol || ch == ' ' || ch == '-' || ch == '+' || ch == '.') {
if (!c && ch == ' ') { if (wrd) wrd++; continue; } // collapse extra spaces
// Past the right and the word is not too long?
if (col + c > LCD_WIDTH && col >= (LCD_WIDTH) / 4) _newline(); // should it wrap?
c += !eol; // +1 so the space will be printed
col += c; // advance col to new position
while (c) { // character countdown
--c; // count down to zero
wrd = get_utf8_value_cb(wrd, cb_read_byte, &ch); // get characters again
lcd_put_wchar(ch); // character to the LCD
}
if (eol) break; // all done!
wrd = nullptr; // set up for next word
}
else c++; // count word characters
}
}
else {
for (;;) {
p = get_utf8_value_cb(p, cb_read_byte, &ch);
if (!ch) break;
lcd_put_wchar(ch);
col++;
if (col >= LCD_WIDTH) _newline();
}
}
}
void MarlinUI::draw_select_screen_prompt(PGM_P const pref, const char * const string/*=nullptr*/, PGM_P const suff/*=nullptr*/) {
const uint8_t plen = utf8_strlen_P(pref), slen = suff ? utf8_strlen_P(suff) : 0;
uint8_t col = 0, row = 0;
if (!string && plen + slen <= LCD_WIDTH) {
col = (LCD_WIDTH - plen - slen) / 2;
row = LCD_HEIGHT > 3 ? 1 : 0;
}
wrap_string_P(col, row, pref, true);
if (string) {
if (col) { col = 0; row++; } // Move to the start of the next line
wrap_string(col, row, string);
}
if (suff) wrap_string_P(col, row, suff);
}
#endif // HAS_LCD_MENU
void MarlinUI::init() {
init_lcd();
#if HAS_DIGITAL_BUTTONS
#if BUTTON_EXISTS(EN1)
SET_INPUT_PULLUP(BTN_EN1);
#endif
#if BUTTON_EXISTS(EN2)
SET_INPUT_PULLUP(BTN_EN2);
#endif
#if BUTTON_EXISTS(ENC)
SET_INPUT_PULLUP(BTN_ENC);
#endif
#if BUTTON_EXISTS(UP)
SET_INPUT(BTN_UP);
#endif
#if BUTTON_EXISTS(DWN)
SET_INPUT(BTN_DWN);
#endif
#if BUTTON_EXISTS(LFT)
SET_INPUT(BTN_LFT);
#endif
#if BUTTON_EXISTS(RT)
SET_INPUT(BTN_RT);
#endif
#endif // !HAS_DIGITAL_BUTTONS
#if HAS_SHIFT_ENCODER
#if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register
SET_OUTPUT(SR_DATA_PIN);
SET_OUTPUT(SR_CLK_PIN);
#elif defined(SHIFT_CLK)
SET_OUTPUT(SHIFT_CLK);
OUT_WRITE(SHIFT_LD, HIGH);
#if defined(SHIFT_EN) && SHIFT_EN >= 0
OUT_WRITE(SHIFT_EN, LOW);
#endif
SET_INPUT_PULLUP(SHIFT_OUT);
#endif
#endif // HAS_SHIFT_ENCODER
#if ENABLED(SDSUPPORT)
#if PIN_EXISTS(SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
#if ENABLED(INIT_SDCARD_ON_BOOT)
lcd_sd_status = 2; // UNKNOWN
#endif
#endif
#if HAS_ENCODER_ACTION
#if HAS_SLOW_BUTTONS
slow_buttons = 0;
#endif
#endif
update_buttons();
#if HAS_ENCODER_ACTION
encoderDiff = 0;
#endif
}
bool MarlinUI::get_blink() {
static uint8_t blink = 0;
static millis_t next_blink_ms = 0;
millis_t ms = millis();
if (ELAPSED(ms, next_blink_ms)) {
blink ^= 0xFF;
next_blink_ms = ms + 1000 - (LCD_UPDATE_INTERVAL) / 2;
}
return blink != 0;
}
////////////////////////////////////////////
///////////// Keypad Handling //////////////
////////////////////////////////////////////
#if ENABLED(REPRAPWORLD_KEYPAD) && HAS_ENCODER_ACTION
volatile uint8_t MarlinUI::keypad_buttons;
#if HAS_LCD_MENU && !HAS_ADC_BUTTONS
void lcd_move_x();
void lcd_move_y();
void lcd_move_z();
void _reprapworld_keypad_move(const AxisEnum axis, const int16_t dir) {
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
encoderPosition = dir;
switch (axis) {
case X_AXIS: lcd_move_x(); break;
case Y_AXIS: lcd_move_y(); break;
case Z_AXIS: lcd_move_z();
default: break;
}
}
#endif
bool MarlinUI::handle_keypad() {
#if HAS_ADC_BUTTONS
#define ADC_MIN_KEY_DELAY 100
if (keypad_buttons) {
#if HAS_ENCODER_ACTION
refresh(LCDVIEW_REDRAW_NOW);
#if HAS_LCD_MENU
if (encoderDirection == -(ENCODERBASE)) { // ADC_KEYPAD forces REVERSE_MENU_DIRECTION, so this indicates menu navigation
if (RRK(EN_KEYPAD_UP)) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM;
else if (RRK(EN_KEYPAD_DOWN)) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM;
else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); }
else if (RRK(EN_KEYPAD_RIGHT)) { return_to_status(); quick_feedback(); }
}
else
#endif
{
#if HAS_LCD_MENU
if (RRK(EN_KEYPAD_UP)) encoderPosition -= ENCODER_PULSES_PER_STEP;
else if (RRK(EN_KEYPAD_DOWN)) encoderPosition += ENCODER_PULSES_PER_STEP;
else if (RRK(EN_KEYPAD_LEFT)) { MenuItem_back::action(); quick_feedback(); }
else if (RRK(EN_KEYPAD_RIGHT)) encoderPosition = 0;
#else
if (RRK(EN_KEYPAD_UP) || RRK(EN_KEYPAD_LEFT)) encoderPosition -= ENCODER_PULSES_PER_STEP;
else if (RRK(EN_KEYPAD_DOWN) || RRK(EN_KEYPAD_RIGHT)) encoderPosition += ENCODER_PULSES_PER_STEP;
#endif
}
#endif
next_button_update_ms = millis() + ADC_MIN_KEY_DELAY;
return true;
}
#else // !HAS_ADC_BUTTONS
static uint8_t keypad_debounce = 0;
if (!RRK( EN_KEYPAD_F1 | EN_KEYPAD_F2
| EN_KEYPAD_F3 | EN_KEYPAD_DOWN
| EN_KEYPAD_RIGHT | EN_KEYPAD_MIDDLE
| EN_KEYPAD_UP | EN_KEYPAD_LEFT )
) {
if (keypad_debounce > 0) keypad_debounce--;
}
else if (!keypad_debounce) {
keypad_debounce = 2;
const bool homed = all_axes_homed();
#if HAS_LCD_MENU
if (RRK(EN_KEYPAD_MIDDLE)) goto_screen(menu_move);
#if DISABLED(DELTA) && Z_HOME_DIR < 0
if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
#endif
if (homed) {
#if ENABLED(DELTA) || Z_HOME_DIR != -1
if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
#endif
if (RRK(EN_KEYPAD_F3)) _reprapworld_keypad_move(Z_AXIS, -1);
if (RRK(EN_KEYPAD_LEFT)) _reprapworld_keypad_move(X_AXIS, -1);
if (RRK(EN_KEYPAD_RIGHT)) _reprapworld_keypad_move(X_AXIS, 1);
if (RRK(EN_KEYPAD_DOWN)) _reprapworld_keypad_move(Y_AXIS, 1);
if (RRK(EN_KEYPAD_UP)) _reprapworld_keypad_move(Y_AXIS, -1);
}
#endif // HAS_LCD_MENU
if (!homed && RRK(EN_KEYPAD_F1)) queue.inject_P(PSTR("G28"));
return true;
}
#endif // !ADC_KEYPAD
return false;
}
#endif // REPRAPWORLD_KEYPAD
/**
* Status Screen
*
* This is very display-dependent, so the lcd implementation draws this.
*/
#if ENABLED(LCD_PROGRESS_BAR)
millis_t MarlinUI::progress_bar_ms; // = 0
#if PROGRESS_MSG_EXPIRE > 0
millis_t MarlinUI::expire_status_ms; // = 0
#endif
#endif
void MarlinUI::status_screen() {
#if HAS_LCD_MENU
ENCODER_RATE_MULTIPLY(false);
#endif
#if ENABLED(LCD_PROGRESS_BAR)
//
// HD44780 implements the following message blinking and
// message expiration because Status Line and Progress Bar
// share the same line on the display.
//
#if DISABLED(PROGRESS_MSG_ONCE) || (PROGRESS_MSG_EXPIRE > 0)
#define GOT_MS
const millis_t ms = millis();
#endif
// If the message will blink rather than expire...
#if DISABLED(PROGRESS_MSG_ONCE)
if (ELAPSED(ms, progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME))
progress_bar_ms = ms;
#endif
#if PROGRESS_MSG_EXPIRE > 0
// Handle message expire
if (expire_status_ms > 0) {
// Expire the message if a job is active and the bar has ticks
if (get_progress() > 2 && !print_job_timer.isPaused()) {
if (ELAPSED(ms, expire_status_ms)) {
status_message[0] = '\0';
expire_status_ms = 0;
}
}
else {
// Defer message expiration before bar appears
// and during any pause (not just SD)
expire_status_ms += LCD_UPDATE_INTERVAL;
}
}
#endif // PROGRESS_MSG_EXPIRE
#endif // LCD_PROGRESS_BAR
#if HAS_LCD_MENU
if (use_click()) {
#if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
next_filament_display = millis() + 5000UL; // Show status message for 5s
#endif
goto_screen(menu_main);
#if DISABLED(NO_LCD_REINIT)
init_lcd(); // May revive the LCD if static electricity killed it
#endif
return;
}
#endif
#if ENABLED(ULTIPANEL_FEEDMULTIPLY)
const int16_t old_frm = feedrate_percentage;
int16_t new_frm = old_frm + int16_t(encoderPosition);
// Dead zone at 100% feedrate
if (old_frm == 100) {
if (int16_t(encoderPosition) > ENCODER_FEEDRATE_DEADZONE)
new_frm -= ENCODER_FEEDRATE_DEADZONE;
else if (int16_t(encoderPosition) < -(ENCODER_FEEDRATE_DEADZONE))
new_frm += ENCODER_FEEDRATE_DEADZONE;
else
new_frm = old_frm;
}
else if ((old_frm < 100 && new_frm > 100) || (old_frm > 100 && new_frm < 100))
new_frm = 100;
LIMIT(new_frm, 10, 999);
if (old_frm != new_frm) {
feedrate_percentage = new_frm;
encoderPosition = 0;
#if HAS_BUZZER && ENABLED(BEEP_ON_FEEDRATE_CHANGE)
static millis_t next_beep;
#ifndef GOT_MS
const millis_t ms = millis();
#endif
if (ELAPSED(ms, next_beep)) {
buzz(FEEDRATE_CHANGE_BEEP_DURATION, FEEDRATE_CHANGE_BEEP_FREQUENCY);
next_beep = ms + 500UL;
}
#endif
}
#endif // ULTIPANEL_FEEDMULTIPLY
draw_status_screen();
}
void MarlinUI::kill_screen(PGM_P lcd_error, PGM_P lcd_component) {
init();
status_printf_P(1, PSTR(S_FMT ": " S_FMT), lcd_error, lcd_component);
#if HAS_LCD_MENU
return_to_status();
#endif
// RED ALERT. RED ALERT.
#ifdef LED_BACKLIGHT_TIMEOUT
leds.set_color(LEDColorRed());
#ifdef NEOPIXEL_BKGD_LED_INDEX
neo.set_pixel_color(NEOPIXEL_BKGD_LED_INDEX, 255, 0, 0, 0);
neo.show();
#endif
#endif
draw_kill_screen();
}
void MarlinUI::quick_feedback(const bool clear_buttons/*=true*/) {
#if HAS_LCD_MENU
refresh();
#endif
#if HAS_ENCODER_ACTION
if (clear_buttons) buttons = 0;
next_button_update_ms = millis() + 500;
#else
UNUSED(clear_buttons);
#endif
#if HAS_BUZZER
// Buzz and wait. Is the delay needed for buttons to settle?
buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#if HAS_LCD_MENU
#if USE_BEEPER
for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); }
#else
delay(10);
#endif
#endif
#endif
}
////////////////////////////////////////////
/////////////// Manual Move ////////////////
////////////////////////////////////////////
#if HAS_LCD_MENU
extern bool no_reentry; // Flag to prevent recursion into menu handlers
int8_t manual_move_axis = (int8_t)NO_AXIS;
millis_t manual_move_start_time = 0;
#if IS_KINEMATIC
bool MarlinUI::processing_manual_move = false;
float manual_move_offset = 0;
#endif
#if E_MANUAL > 1
int8_t MarlinUI::manual_move_e_index = 0;
#endif
/**
* If the most recent manual move hasn't been fed to the planner yet,
* and the planner can accept one, send a move immediately.
*/
void MarlinUI::manage_manual_move() {
if (processing_manual_move) return;
if (manual_move_axis != (int8_t)NO_AXIS && ELAPSED(millis(), manual_move_start_time) && !planner.is_full()) {
const feedRate_t fr_mm_s = MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]);
#if IS_KINEMATIC
#if EXTRUDERS > 1
const int8_t old_extruder = active_extruder;
if (manual_move_axis == E_AXIS) active_extruder = manual_move_e_index;
#endif
// Set movement on a single axis
destination = current_position;
destination[manual_move_axis] += manual_move_offset;
// Reset for the next move
manual_move_offset = 0;
manual_move_axis = (int8_t)NO_AXIS;
// DELTA and SCARA machines use segmented moves, which could fill the planner during the call to
// move_to_destination. This will cause idle() to be called, which can then call this function while the
// previous invocation is being blocked. Modifications to manual_move_offset shouldn't be made while
// processing_manual_move is true or the planner will get out of sync.
processing_manual_move = true;
prepare_internal_move_to_destination(fr_mm_s); // will set current_position from destination
processing_manual_move = false;
#if EXTRUDERS > 1
active_extruder = old_extruder;
#endif
#else
planner.buffer_line(current_position, fr_mm_s, manual_move_axis == E_AXIS ? manual_move_e_index : active_extruder);
manual_move_axis = (int8_t)NO_AXIS;
#endif
}
}
#endif // HAS_LCD_MENU
/**
* Update the LCD, read encoder buttons, etc.
* - Read button states
* - Check the SD Card slot state
* - Act on RepRap World keypad input
* - Update the encoder position
* - Apply acceleration to the encoder position
* - Do refresh(LCDVIEW_CALL_REDRAW_NOW) on controller events
* - Reset the Info Screen timeout if there's any input
* - Update status indicators, if any
*
* Run the current LCD menu handler callback function:
* - Call the handler only if lcdDrawUpdate != LCDVIEW_NONE
* - Before calling the handler, LCDVIEW_CALL_NO_REDRAW => LCDVIEW_NONE
* - Call the menu handler. Menu handlers should do the following:
* - If a value changes, set lcdDrawUpdate to LCDVIEW_REDRAW_NOW and draw the value
* (Encoder events automatically set lcdDrawUpdate for you.)
* - if (should_draw()) { redraw }
* - Before exiting the handler set lcdDrawUpdate to:
* - LCDVIEW_CLEAR_CALL_REDRAW to clear screen and set LCDVIEW_CALL_REDRAW_NEXT.
* - LCDVIEW_REDRAW_NOW to draw now (including remaining stripes).
* - LCDVIEW_CALL_REDRAW_NEXT to draw now and get LCDVIEW_REDRAW_NOW on the next loop.
* - LCDVIEW_CALL_NO_REDRAW to draw now and get LCDVIEW_NONE on the next loop.
* - NOTE: For graphical displays menu handlers may be called 2 or more times per loop,
* so don't change lcdDrawUpdate without considering this.
*
* After the menu handler callback runs (or not):
* - Clear the LCD if lcdDrawUpdate == LCDVIEW_CLEAR_CALL_REDRAW
* - Update lcdDrawUpdate for the next loop (i.e., move one state down, usually)
*
* This function is only called from the main thread.
*/
LCDViewAction MarlinUI::lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
void MarlinUI::update() {
static uint16_t max_display_update_time = 0;
static millis_t next_lcd_update_ms;
millis_t ms = millis();
#if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS
static millis_t return_to_status_ms = 0;
#define RESET_STATUS_TIMEOUT() (return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS)
#else
#define RESET_STATUS_TIMEOUT() NOOP
#endif
#ifdef LED_BACKLIGHT_TIMEOUT
leds.update_timeout(powersupply_on);
#endif
#if HAS_LCD_MENU
// Handle any queued Move Axis motion
manage_manual_move();
// Update button states for button_pressed(), etc.
// If the state changes the next update may be delayed 300-500ms.
update_buttons();
// If the action button is pressed...
static bool wait_for_unclick; // = false
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_MENU_MASK 0x80
static bool arrow_pressed; // = false
// Handle touch events which are slow to read
if (ELAPSED(ms, next_button_update_ms)) {
uint8_t touch_buttons = touch.read_buttons();
if (touch_buttons) {
RESET_STATUS_TIMEOUT();
if (touch_buttons & TOUCH_MENU_MASK) { // Processing Menu Area touch?
if (!wait_for_unclick) { // If not waiting for a debounce release:
wait_for_unclick = true; // - Set debounce flag to ignore continous clicks
wait_for_user = false; // - Any click clears wait for user
// TODO for next PR.
//uint8_t tpos = touch_buttons & ~(TOUCH_MENU_MASK); // Safe 7bit touched screen coordinate
next_button_update_ms = ms + 500; // Defer next check for 1/2 second
#if HAS_LCD_MENU
refresh();
#endif
}
touch_buttons = 0; // Swallow the touch
}
buttons |= (touch_buttons & (EN_C | EN_D)); // Pass on Click and Back buttons
if (touch_buttons & (EN_A | EN_B)) { // A and/or B button?
encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * (ENCODER_PULSES_PER_STEP) * encoderDirection;
if (touch_buttons & EN_A) encoderDiff *= -1;
next_button_update_ms = ms + repeat_delay; // Assume the repeat delay
if (!wait_for_unclick && !arrow_pressed) { // On click prepare for repeat
next_button_update_ms += 250; // Longer delay on first press
arrow_pressed = true; // Mark arrow as pressed
#if HAS_BUZZER
buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#endif
}
}
}
if (!(touch_buttons & (EN_A | EN_B))) arrow_pressed = false;
}
#endif // TOUCH_BUTTONS
// Integrated LCD click handling via button_pressed
if (!external_control && button_pressed()) {
if (!wait_for_unclick) { // If not waiting for a debounce release:
wait_for_unclick = true; // - Set debounce flag to ignore continous clicks
lcd_clicked = !wait_for_user && !no_reentry; // - Keep the click if not waiting for a user-click
wait_for_user = false; // - Any click clears wait for user
quick_feedback(); // - Always make a click sound
}
}
else
wait_for_unclick = false;
if (LCD_BACK_CLICKED()) {
quick_feedback();
goto_previous_screen();
}
#endif // HAS_LCD_MENU
#if ENABLED(INIT_SDCARD_ON_BOOT)
//
// SPI SD Card detection (and first card init when the LCD is present)
//
const uint8_t sd_status = (uint8_t)IS_SD_INSERTED();
if (sd_status != lcd_sd_status && detected()) {
uint8_t old_sd_status = lcd_sd_status; // prevent re-entry to this block!
lcd_sd_status = sd_status;
if (sd_status) {
safe_delay(500); // Some boards need a delay to get settled
card.mount();
if (old_sd_status == 2)
card.beginautostart(); // Initial boot
else
set_status_P(GET_TEXT(MSG_MEDIA_INSERTED));
}
#if PIN_EXISTS(SD_DETECT)
else {
card.release();
if (old_sd_status != 2) {
set_status_P(GET_TEXT(MSG_MEDIA_REMOVED));
#if HAS_LCD_MENU
return_to_status();
#endif
}
}
#if DISABLED(NO_LCD_REINIT)
init_lcd(); // May revive the LCD if static electricity killed it
#endif
#endif
refresh();
ms = millis();
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL; // delay LCD update until after SD activity completes
#ifdef LED_BACKLIGHT_TIMEOUT
leds.reset_timeout(ms);
#endif
}
#endif // INIT_SDCARD_ON_BOOT
if (ELAPSED(ms, next_lcd_update_ms)
#if HAS_GRAPHICAL_LCD
|| drawing_screen
#endif
) {
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
#if ENABLED(TOUCH_BUTTONS)
if (on_status_screen())
next_lcd_update_ms += (LCD_UPDATE_INTERVAL) * 2;
#endif
#if ENABLED(LCD_HAS_STATUS_INDICATORS)
update_indicators();
#endif
#if HAS_ENCODER_ACTION
#if HAS_SLOW_BUTTONS
slow_buttons = read_slow_buttons(); // Buttons that take too long to read in interrupt context
#endif
#if ENABLED(REPRAPWORLD_KEYPAD)
if (handle_keypad()) RESET_STATUS_TIMEOUT();
#endif
const float abs_diff = ABS(encoderDiff);
const bool encoderPastThreshold = (abs_diff >= (ENCODER_PULSES_PER_STEP));
if (encoderPastThreshold || lcd_clicked) {
if (encoderPastThreshold) {
#if HAS_LCD_MENU && ENABLED(ENCODER_RATE_MULTIPLIER)
int32_t encoderMultiplier = 1;
if (encoderRateMultiplierEnabled) {
const float encoderMovementSteps = abs_diff / (ENCODER_PULSES_PER_STEP);
if (lastEncoderMovementMillis) {
// Note that the rate is always calculated between two passes through the
// loop and that the abs of the encoderDiff value is tracked.
const float encoderStepRate = encoderMovementSteps / float(ms - lastEncoderMovementMillis) * 1000;
if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
#if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Enc Step Rate: ", encoderStepRate);
SERIAL_ECHOPAIR(" Multiplier: ", encoderMultiplier);
SERIAL_ECHOPAIR(" ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC);
SERIAL_ECHOPAIR(" ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC);
SERIAL_EOL();
#endif
}
lastEncoderMovementMillis = ms;
} // encoderRateMultiplierEnabled
#else
constexpr int32_t encoderMultiplier = 1;
#endif // ENCODER_RATE_MULTIPLIER
encoderPosition += (encoderDiff * encoderMultiplier) / (ENCODER_PULSES_PER_STEP);
encoderDiff = 0;
}
RESET_STATUS_TIMEOUT();
refresh(LCDVIEW_REDRAW_NOW);
#ifdef LED_BACKLIGHT_TIMEOUT
leds.reset_timeout(ms);
#endif
}
#endif
// This runs every ~100ms when idling often enough.
// Instead of tracking changes just redraw the Status Screen once per second.
if (on_status_screen() && !lcd_status_update_delay--) {
lcd_status_update_delay = 9
#if HAS_GRAPHICAL_LCD
+ 3
#endif
;
max_display_update_time--;
refresh(LCDVIEW_REDRAW_NOW);
}
#if HAS_LCD_MENU && ENABLED(SCROLL_LONG_FILENAMES)
// If scrolling of long file names is enabled and we are in the sd card menu,
// cause a refresh to occur until all the text has scrolled into view.
if (currentScreen == menu_media && !lcd_status_update_delay--) {
lcd_status_update_delay = 4;
if (++filename_scroll_pos > filename_scroll_max) {
filename_scroll_pos = 0;
lcd_status_update_delay = 12;
}
refresh(LCDVIEW_REDRAW_NOW);
RESET_STATUS_TIMEOUT();
}
#endif
// then we want to use 1/2 of the time only.
uint16_t bbr2 = planner.block_buffer_runtime() >> 1;
if ((should_draw() || drawing_screen) && (!bbr2 || bbr2 > max_display_update_time)) {
// Change state of drawing flag between screen updates
if (!drawing_screen) switch (lcdDrawUpdate) {
case LCDVIEW_CALL_NO_REDRAW:
refresh(LCDVIEW_NONE);
break;
case LCDVIEW_CLEAR_CALL_REDRAW:
case LCDVIEW_CALL_REDRAW_NEXT:
refresh(LCDVIEW_REDRAW_NOW);
case LCDVIEW_REDRAW_NOW: // set above, or by a handler through LCDVIEW_CALL_REDRAW_NEXT
case LCDVIEW_NONE:
break;
} // switch
#if HAS_ADC_BUTTONS
keypad_buttons = 0;
#endif
#if HAS_GRAPHICAL_LCD
#if ENABLED(LIGHTWEIGHT_UI)
const bool in_status = on_status_screen(),
do_u8g_loop = !in_status;
lcd_in_status(in_status);
if (in_status) status_screen();
#else
constexpr bool do_u8g_loop = true;
#endif
if (do_u8g_loop) {
if (!drawing_screen) { // If not already drawing pages
u8g.firstPage(); // Start the first page
drawing_screen = first_page = true; // Flag as drawing pages
}
set_font(FONT_MENU); // Setup font for every page draw
u8g.setColorIndex(1); // And reset the color
run_current_screen(); // Draw and process the current screen
first_page = false;
// The screen handler can clear drawing_screen for an action that changes the screen.
// If still drawing and there's another page, update max-time and return now.
// The nextPage will already be set up on the next call.
if (drawing_screen && (drawing_screen = u8g.nextPage())) {
NOLESS(max_display_update_time, millis() - ms);
return;
}
}
#else
run_current_screen();
#endif
#if HAS_LCD_MENU
lcd_clicked = false;
#endif
// Keeping track of the longest time for an individual LCD update.
// Used to do screen throttling when the planner starts to fill up.
NOLESS(max_display_update_time, millis() - ms);
}
#if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS
// Return to Status Screen after a timeout
if (on_status_screen() || defer_return_to_status)
RESET_STATUS_TIMEOUT();
else if (ELAPSED(ms, return_to_status_ms))
return_to_status();
#endif
// Change state of drawing flag between screen updates
if (!drawing_screen) switch (lcdDrawUpdate) {
case LCDVIEW_CLEAR_CALL_REDRAW:
clear_lcd(); break;
case LCDVIEW_REDRAW_NOW:
refresh(LCDVIEW_NONE);
case LCDVIEW_NONE:
case LCDVIEW_CALL_REDRAW_NEXT:
case LCDVIEW_CALL_NO_REDRAW:
default: break;
} // switch
} // ELAPSED(ms, next_lcd_update_ms)
}
#if HAS_ADC_BUTTONS
typedef struct {
uint16_t ADCKeyValueMin, ADCKeyValueMax;
uint8_t ADCKeyNo;
} _stADCKeypadTable_;
#ifndef ADC_BUTTONS_VALUE_SCALE
#define ADC_BUTTONS_VALUE_SCALE 1.0 // for the power voltage equal to the reference voltage
#endif
#ifndef ADC_BUTTONS_R_PULLUP
#define ADC_BUTTONS_R_PULLUP 4.7 // common pull-up resistor in the voltage divider
#endif
#ifndef ADC_BUTTONS_LEFT_R_PULLDOWN
#define ADC_BUTTONS_LEFT_R_PULLDOWN 0.47 // pull-down resistor for LEFT button voltage divider
#endif
#ifndef ADC_BUTTONS_RIGHT_R_PULLDOWN
#define ADC_BUTTONS_RIGHT_R_PULLDOWN 4.7 // pull-down resistor for RIGHT button voltage divider
#endif
#ifndef ADC_BUTTONS_UP_R_PULLDOWN
#define ADC_BUTTONS_UP_R_PULLDOWN 1.0 // pull-down resistor for UP button voltage divider
#endif
#ifndef ADC_BUTTONS_DOWN_R_PULLDOWN
#define ADC_BUTTONS_DOWN_R_PULLDOWN 10.0 // pull-down resistor for DOWN button voltage divider
#endif
#ifndef ADC_BUTTONS_MIDDLE_R_PULLDOWN
#define ADC_BUTTONS_MIDDLE_R_PULLDOWN 2.2 // pull-down resistor for MIDDLE button voltage divider
#endif
// Calculate the ADC value for the voltage divider with specified pull-down resistor value
#define ADC_BUTTON_VALUE(r) (int(4096.0 * (ADC_BUTTONS_VALUE_SCALE) * r / (r + ADC_BUTTONS_R_PULLUP)))
static const _stADCKeypadTable_ stADCKeyTable[] PROGMEM = {
// VALUE_MIN, VALUE_MAX, KEY
{ 4000, 4096, 1 + BLEN_KEYPAD_F1 }, // F1
{ 4000, 4096, 1 + BLEN_KEYPAD_F2 }, // F2
{ 4000, 4096, 1 + BLEN_KEYPAD_F3 }, // F3
{ ADC_BUTTON_VALUE(ADC_BUTTONS_LEFT_R_PULLDOWN) - 100,
ADC_BUTTON_VALUE(ADC_BUTTONS_LEFT_R_PULLDOWN) + 100, 1 + BLEN_KEYPAD_LEFT }, // LEFT ( 272 ... 472)
{ ADC_BUTTON_VALUE(ADC_BUTTONS_RIGHT_R_PULLDOWN) - 100,
ADC_BUTTON_VALUE(ADC_BUTTONS_RIGHT_R_PULLDOWN) + 100, 1 + BLEN_KEYPAD_RIGHT }, // RIGHT (1948 ... 2148)
{ ADC_BUTTON_VALUE(ADC_BUTTONS_UP_R_PULLDOWN) - 100,
ADC_BUTTON_VALUE(ADC_BUTTONS_UP_R_PULLDOWN) + 100, 1 + BLEN_KEYPAD_UP }, // UP ( 618 ... 818)
{ ADC_BUTTON_VALUE(ADC_BUTTONS_DOWN_R_PULLDOWN) - 100,
ADC_BUTTON_VALUE(ADC_BUTTONS_DOWN_R_PULLDOWN) + 100, 1 + BLEN_KEYPAD_DOWN }, // DOWN (2686 ... 2886)
{ ADC_BUTTON_VALUE(ADC_BUTTONS_MIDDLE_R_PULLDOWN) - 100,
ADC_BUTTON_VALUE(ADC_BUTTONS_MIDDLE_R_PULLDOWN) + 100, 1 + BLEN_KEYPAD_MIDDLE }, // ENTER (1205 ... 1405)
};
uint8_t get_ADC_keyValue() {
if (thermalManager.ADCKey_count >= 16) {
const uint16_t currentkpADCValue = thermalManager.current_ADCKey_raw << 2;
thermalManager.current_ADCKey_raw = 1024;
thermalManager.ADCKey_count = 0;
if (currentkpADCValue < 4000)
for (uint8_t i = 0; i < ADC_KEY_NUM; i++) {
const uint16_t lo = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMin),
hi = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMax);
if (WITHIN(currentkpADCValue, lo, hi)) return pgm_read_byte(&stADCKeyTable[i].ADCKeyNo);
}
}
return 0;
}
#endif // HAS_ADC_BUTTONS
#if HAS_ENCODER_ACTION
#if DISABLED(ADC_KEYPAD) && (ENABLED(REPRAPWORLD_KEYPAD) || !HAS_DIGITAL_BUTTONS)
/**
* Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
* These values are independent of which pins are used for EN_A and EN_B indications
* The rotary encoder part is also independent to the chipset used for the LCD
*/
#define GET_SHIFT_BUTTON_STATES(DST) \
uint8_t new_##DST = 0; \
WRITE(SHIFT_LD, LOW); \
WRITE(SHIFT_LD, HIGH); \
for (int8_t i = 0; i < 8; i++) { \
new_##DST >>= 1; \
if (READ(SHIFT_OUT)) SBI(new_##DST, 7); \
WRITE(SHIFT_CLK, HIGH); \
WRITE(SHIFT_CLK, LOW); \
} \
DST = ~new_##DST; //invert it, because a pressed switch produces a logical 0
#endif
/**
* Read encoder buttons from the hardware registers
* Warning: This function is called from interrupt context!
*/
void MarlinUI::update_buttons() {
const millis_t now = millis();
if (ELAPSED(now, next_button_update_ms)) {
#if HAS_DIGITAL_BUTTONS
#if ANY_BUTTON(EN1, EN2, ENC, BACK)
uint8_t newbutton = 0;
#if BUTTON_EXISTS(EN1)
if (BUTTON_PRESSED(EN1)) newbutton |= EN_A;
#endif
#if BUTTON_EXISTS(EN2)
if (BUTTON_PRESSED(EN2)) newbutton |= EN_B;
#endif
#if BUTTON_EXISTS(ENC)
if (BUTTON_PRESSED(ENC)) newbutton |= EN_C;
#endif
#if BUTTON_EXISTS(BACK)
if (BUTTON_PRESSED(BACK)) newbutton |= EN_D;
#endif
#else
constexpr uint8_t newbutton = 0;
#endif
//
// Directional buttons
//
#if ANY_BUTTON(UP, DWN, LFT, RT)
const int8_t pulses = (ENCODER_PULSES_PER_STEP) * encoderDirection;
if (false) {
// for the else-ifs below
}
#if BUTTON_EXISTS(UP)
else if (BUTTON_PRESSED(UP)) {
encoderDiff = (ENCODER_STEPS_PER_MENU_ITEM) * pulses;
next_button_update_ms = now + 300;
}
#endif
#if BUTTON_EXISTS(DWN)
else if (BUTTON_PRESSED(DWN)) {
encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * pulses;
next_button_update_ms = now + 300;
}
#endif
#if BUTTON_EXISTS(LFT)
else if (BUTTON_PRESSED(LFT)) {
encoderDiff = -pulses;
next_button_update_ms = now + 300;
}
#endif
#if BUTTON_EXISTS(RT)
else if (BUTTON_PRESSED(RT)) {
encoderDiff = pulses;
next_button_update_ms = now + 300;
}
#endif
#endif // UP || DWN || LFT || RT
buttons = newbutton
#if HAS_SLOW_BUTTONS
| slow_buttons
#endif
;
#elif HAS_ADC_BUTTONS
buttons = 0;
#endif
#if HAS_ADC_BUTTONS
if (keypad_buttons == 0) {
const uint8_t b = get_ADC_keyValue();
if (WITHIN(b, 1, 8)) keypad_buttons = _BV(b - 1);
}
#endif
#if HAS_SHIFT_ENCODER
GET_SHIFT_BUTTON_STATES(
#if ENABLED(REPRAPWORLD_KEYPAD)
keypad_buttons
#else
buttons
#endif
);
#endif
} // next_button_update_ms
#if HAS_ENCODER_WHEEL
static uint8_t lastEncoderBits;
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
// Manage encoder rotation
#define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: encoderDiff += encoderDirection; break; case _E2: encoderDiff -= encoderDirection; }
uint8_t enc = 0;
if (buttons & EN_A) enc |= B01;
if (buttons & EN_B) enc |= B10;
if (enc != lastEncoderBits) {
switch (enc) {
case encrot0: ENCODER_SPIN(encrot3, encrot1); break;
case encrot1: ENCODER_SPIN(encrot0, encrot2); break;
case encrot2: ENCODER_SPIN(encrot1, encrot3); break;
case encrot3: ENCODER_SPIN(encrot2, encrot0); break;
}
if (external_control) {
#if ENABLED(AUTO_BED_LEVELING_UBL)
ubl.encoder_diff = encoderDiff; // Make encoder rotation available to UBL G29 mesh editing.
#endif
encoderDiff = 0; // Hide the encoder event from the current screen handler.
}
lastEncoderBits = enc;
}
#endif // HAS_ENCODER_WHEEL
}
#endif // HAS_ENCODER_ACTION
#endif // HAS_SPI_LCD
#if HAS_DISPLAY
#if ENABLED(EXTENSIBLE_UI)
#include "extensible_ui/ui_api.h"
#endif
////////////////////////////////////////////
/////////////// Status Line ////////////////
////////////////////////////////////////////
#if ENABLED(STATUS_MESSAGE_SCROLLING)
void MarlinUI::advance_status_scroll() {
// Advance by one UTF8 code-word
if (status_scroll_offset < utf8_strlen(status_message))
while (!START_OF_UTF8_CHAR(status_message[++status_scroll_offset]));
else
status_scroll_offset = 0;
}
char* MarlinUI::status_and_len(uint8_t &len) {
char *out = status_message + status_scroll_offset;
len = utf8_strlen(out);
return out;
}
#endif
void MarlinUI::finish_status(const bool persist) {
#if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
UNUSED(persist);
#endif
#if ENABLED(LCD_PROGRESS_BAR)
progress_bar_ms = millis();
#if PROGRESS_MSG_EXPIRE > 0
expire_status_ms = persist ? 0 : progress_bar_ms + PROGRESS_MSG_EXPIRE;
#endif
#endif
#if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
next_filament_display = millis() + 5000UL; // Show status message for 5s
#endif
#if HAS_SPI_LCD && ENABLED(STATUS_MESSAGE_SCROLLING)
status_scroll_offset = 0;
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onStatusChanged(status_message);
#endif
}
bool MarlinUI::has_status() { return (status_message[0] != '\0'); }
void MarlinUI::set_status(const char * const message, const bool persist) {
if (alert_level) return;
// Here we have a problem. The message is encoded in UTF8, so
// arbitrarily cutting it will be a problem. We MUST be sure
// that there is no cutting in the middle of a multibyte character!
// Get a pointer to the null terminator
const char* pend = message + strlen(message);
// If length of supplied UTF8 string is greater than
// our buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(*pend)) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy(status_message, message, maxLen);
status_message[maxLen] = '\0';
finish_status(persist);
}
#include
void MarlinUI::status_printf_P(const uint8_t level, PGM_P const fmt, ...) {
if (level < alert_level) return;
alert_level = level;
va_list args;
va_start(args, fmt);
vsnprintf_P(status_message, MAX_MESSAGE_LENGTH, fmt, args);
va_end(args);
finish_status(level > 0);
}
void MarlinUI::set_status_P(PGM_P const message, int8_t level) {
if (level < 0) level = alert_level = 0;
if (level < alert_level) return;
alert_level = level;
// Since the message is encoded in UTF8 it must
// only be cut on a character boundary.
// Get a pointer to the null terminator
PGM_P pend = message + strlen_P(message);
// If length of supplied UTF8 string is greater than
// the buffer size, start cutting whole UTF8 chars
while ((pend - message) > MAX_MESSAGE_LENGTH) {
--pend;
while (!START_OF_UTF8_CHAR(pgm_read_byte(pend))) --pend;
};
// At this point, we have the proper cut point. Use it
uint8_t maxLen = pend - message;
strncpy_P(status_message, message, maxLen);
status_message[maxLen] = '\0';
finish_status(level > 0);
}
void MarlinUI::set_alert_status_P(PGM_P const message) {
set_status_P(message, 1);
#if HAS_LCD_MENU
return_to_status();
#endif
}
#include "../Marlin.h"
#include "../module/printcounter.h"
PGM_P print_paused = GET_TEXT(MSG_PRINT_PAUSED);
/**
* Reset the status message
*/
void MarlinUI::reset_status() {
PGM_P printing = GET_TEXT(MSG_PRINTING);
PGM_P welcome = GET_TEXT(WELCOME_MSG);
#if SERVICE_INTERVAL_1 > 0
static const char service1[] PROGMEM = { "> " SERVICE_NAME_1 "!" };
#endif
#if SERVICE_INTERVAL_2 > 0
static const char service2[] PROGMEM = { "> " SERVICE_NAME_2 "!" };
#endif
#if SERVICE_INTERVAL_3 > 0
static const char service3[] PROGMEM = { "> " SERVICE_NAME_3 "!" };
#endif
PGM_P msg;
if (printingIsPaused())
msg = print_paused;
#if ENABLED(SDSUPPORT)
else if (IS_SD_PRINTING())
return set_status(card.longest_filename(), true);
#endif
else if (print_job_timer.isRunning())
msg = printing;
#if SERVICE_INTERVAL_1 > 0
else if (print_job_timer.needsService(1)) msg = service1;
#endif
#if SERVICE_INTERVAL_2 > 0
else if (print_job_timer.needsService(2)) msg = service2;
#endif
#if SERVICE_INTERVAL_3 > 0
else if (print_job_timer.needsService(3)) msg = service3;
#endif
else
msg = welcome;
set_status_P(msg, -1);
}
#if ENABLED(SDSUPPORT)
extern bool wait_for_user, wait_for_heatup;
#endif
void MarlinUI::abort_print() {
#if ENABLED(SDSUPPORT)
wait_for_heatup = wait_for_user = false;
card.flag.abort_sd_printing = true;
#endif
#ifdef ACTION_ON_CANCEL
host_action_cancel();
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("UI Aborted"), PSTR("Dismiss"));
#endif
print_job_timer.stop();
set_status_P(GET_TEXT(MSG_PRINT_ABORTED));
#if HAS_LCD_MENU
return_to_status();
#endif
}
#if ANY(PARK_HEAD_ON_PAUSE, SDSUPPORT)
#include "../gcode/queue.h"
#endif
void MarlinUI::pause_print() {
#if HAS_LCD_MENU
synchronize(GET_TEXT(MSG_PAUSE_PRINT));
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.enabled) recovery.save(true, false);
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("UI Pause"), PSTR("Resume"));
#endif
set_status_P(print_paused);
#if ENABLED(PARK_HEAD_ON_PAUSE)
#if HAS_SPI_LCD
lcd_pause_show_message(PAUSE_MESSAGE_PAUSING, PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress
#endif
queue.inject_P(PSTR("M25 P\nM24"));
#elif ENABLED(SDSUPPORT)
queue.inject_P(PSTR("M25"));
#elif defined(ACTION_ON_PAUSE)
host_action_pause();
#endif
}
void MarlinUI::resume_print() {
reset_status();
#if ENABLED(PARK_HEAD_ON_PAUSE)
wait_for_heatup = wait_for_user = false;
#endif
if (IS_SD_PAUSED()) queue.inject_P(PSTR("M24"));
#ifdef ACTION_ON_RESUME
host_action_resume();
#endif
print_job_timer.start(); // Also called by M24
}
#if HAS_PRINT_PROGRESS
uint8_t MarlinUI::get_progress() {
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
const uint8_t p = progress_override & 0x7F;
#else
constexpr uint8_t p = 0;
#endif
return (p
#if ENABLED(SDSUPPORT)
?: card.percentDone()
#endif
);
}
#endif
#endif // HAS_DISPLAY