/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * German * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #ifndef LANGUAGE_DE_H #define LANGUAGE_DE_H #define MAPPER_C2C3 #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 #define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³") #define WELCOME_MSG MACHINE_NAME _UxGT(" bereit") #define MSG_BACK _UxGT("Zurück") #define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") #define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") #define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft-Endstopp") #define MSG_MAIN _UxGT("Hauptmenü") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 #define MSG_DEBUG_MENU _UxGT("Debug-Menü") #define MSG_PROGRESS_BAR_TEST _UxGT("Statusbalken-Test") #define MSG_AUTO_HOME _UxGT("Home XYZ") // G28 #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") #define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klick zum Starten") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") #define MSG_LEVEL_BED_DONE _UxGT("Nivellieren fertig!") #define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe") #define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") #define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp #define MSG_PREHEAT_1 _UxGT("Vorwärmen " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N _UxGT("Vorwärmen " PREHEAT_1_LABEL " ") #define MSG_PREHEAT_1_ALL _UxGT("Vorw. " PREHEAT_1_LABEL " Alles") #define MSG_PREHEAT_1_END _UxGT("Vorw. " PREHEAT_1_LABEL " Extr.") #define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. " PREHEAT_1_LABEL " Bett") #define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. " PREHEAT_1_LABEL " Einst.") #define MSG_PREHEAT_2 _UxGT("Vorwärmen " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N _UxGT("Vorwärmen " PREHEAT_2_LABEL " ") #define MSG_PREHEAT_2_ALL _UxGT("Vorw. " PREHEAT_2_LABEL " Alles") #define MSG_PREHEAT_2_END _UxGT("Vorw. " PREHEAT_2_LABEL " Extr.") #define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. " PREHEAT_2_LABEL " Bett") #define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. " PREHEAT_2_LABEL " Einst.") #define MSG_COOLDOWN _UxGT("Abkühlen") #define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") #define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus") #define MSG_EXTRUDE _UxGT("Extrudieren") #define MSG_RETRACT _UxGT("Rückzug") #define MSG_MOVE_AXIS _UxGT("Achse Bewegen") #define MSG_BED_LEVELING _UxGT("Bett-Nivellierung") #define MSG_LEVEL_BED _UxGT("Bett nivellieren") #define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren") #define MSG_NEXT_CORNER _UxGT("Nächste Ecke") #define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.") #define MSG_USER_MENU _UxGT("Benutzer-Menü") #define MSG_UBL_DOING_G29 _UxGT("G29 ausführen") #define MSG_UBL_UNHOMED _UxGT("Home XYZ zuerst") #define MSG_UBL_TOOLS _UxGT("UBL-Werkzeuge") #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.") #define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen") #define MSG_UBL_BC_INSERT2 _UxGT("Messen") #define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") #define MSG_UBL_SET_BED_TEMP _UxGT("Betttemperatur") #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend-Temp.") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP #define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") #define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") #define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") #define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") #define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.") #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz-Nivell.") #define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren") #define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte") #define MSG_UBL_MAP_TYPE _UxGT("Kartentyp") #define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host") #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung") #define MSG_UBL_INFO_UBL _UxGT("UBL-Info ausgeben") #define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Füllung") #define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Füllung") #define MSG_UBL_SMART_FILLIN _UxGT("Cleveres Füllen") #define MSG_UBL_FILLIN_MESH _UxGT("Netz Füllen") #define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinst. Alles") #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz-Speicherplatz") #define MSG_UBL_STORAGE_SLOT _UxGT("Speicherort") #define MSG_UBL_LOAD_MESH _UxGT("Bettnetz laden") #define MSG_UBL_SAVE_MESH _UxGT("Bettnetz speichern") #define MSG_MESH_LOADED _UxGT("Netz %i geladen") #define MSG_MESH_SAVED _UxGT("Netz %i gespeichert") #define MSG_NO_STORAGE _UxGT("Kein Speicher") #define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern") #define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL") #define MSG_LED_CONTROL _UxGT("LED-Steuerung") #define MSG_LEDS _UxGT("Licht") #define MSG_LED_PRESETS _UxGT("Licht-Einstellungen") #define MSG_SET_LEDS_RED _UxGT("Rot") #define MSG_SET_LEDS_ORANGE _UxGT("Orange") #define MSG_SET_LEDS_YELLOW _UxGT("Gelb") #define MSG_SET_LEDS_GREEN _UxGT("Grün") #define MSG_SET_LEDS_BLUE _UxGT("Blau") #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") #define MSG_SET_LEDS_VIOLET _UxGT("Violett") #define MSG_SET_LEDS_WHITE _UxGT("Weiß") #define MSG_SET_LEDS_DEFAULT _UxGT("Standard") #define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.") #define MSG_INTENSITY_R _UxGT("Intensität Rot") #define MSG_INTENSITY_G _UxGT("Intensität Grün") #define MSG_INTENSITY_B _UxGT("Intensität Blau") #define MSG_INTENSITY_W _UxGT("Intensität Weiß") #define MSG_LED_BRIGHTNESS _UxGT("Helligkeit") #define MSG_MOVING _UxGT("In Bewegung...") #define MSG_FREE_XY _UxGT("Abstand XY") #define MSG_MOVE_X _UxGT("Bewege X") #define MSG_MOVE_Y _UxGT("Bewege Y") #define MSG_MOVE_Z _UxGT("Bewege Z") #define MSG_MOVE_E _UxGT("Bewege Extruder") #define MSG_MOVE_01MM _UxGT(" 0,1 mm") #define MSG_MOVE_1MM _UxGT(" 1,0 mm") #define MSG_MOVE_10MM _UxGT("10,0 mm") #define MSG_SPEED _UxGT("Geschw.") #define MSG_BED_Z _UxGT("Bett Z") #define MSG_NOZZLE _UxGT("Düse") #define MSG_BED _UxGT("Bett") #define MSG_FAN_SPEED _UxGT("Lüfter") #define MSG_EXTRA_FAN_SPEED _UxGT("Geschw. Extralüfter") #define MSG_FLOW _UxGT("Flussrate") #define MSG_CONTROL _UxGT("Einstellungen") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min") #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max") #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor") #define MSG_AUTOTEMP _UxGT("Auto Temperatur") #define MSG_ON _UxGT("Ein") #define MSG_OFF _UxGT("Aus") #define MSG_PID_P _UxGT("PID P") #define MSG_PID_I _UxGT("PID I") #define MSG_PID_D _UxGT("PID D") #define MSG_PID_C _UxGT("PID C") #define MSG_SELECT _UxGT("Auswählen") #define MSG_ACC _UxGT("Beschleunigung") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("V A Jerk") #define MSG_VB_JERK _UxGT("V B Jerk") #define MSG_VC_JERK _UxGT("V C Jerk") #else #define MSG_VA_JERK _UxGT("V X Jerk") #define MSG_VB_JERK _UxGT("V Y Jerk") #define MSG_VC_JERK _UxGT("V Z Jerk") #endif #define MSG_VE_JERK _UxGT("V E Jerk") #define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev") #define MSG_VELOCITY _UxGT("Geschwindigkeit") #define MSG_VMAX _UxGT("V max ") // space intentional #define MSG_VMIN _UxGT("V min") #define MSG_VTRAV_MIN _UxGT("V min Leerfahrt") #define MSG_ACCELERATION _UxGT("Beschleunigung") #define MSG_AMAX _UxGT("A max ") // space intentional #define MSG_A_RETRACT _UxGT("A Rückzug") #define MSG_A_TRAVEL _UxGT("A Leerfahrt") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("A Steps/mm") #define MSG_BSTEPS _UxGT("B Steps/mm") #define MSG_CSTEPS _UxGT("C Steps/mm") #else #define MSG_ASTEPS _UxGT("X Steps/mm") #define MSG_BSTEPS _UxGT("Y Steps/mm") #define MSG_CSTEPS _UxGT("Z Steps/mm") #endif #define MSG_ESTEPS _UxGT("E Steps/mm") #define MSG_E1STEPS _UxGT("E1 Steps/mm") #define MSG_E2STEPS _UxGT("E2 Steps/mm") #define MSG_E3STEPS _UxGT("E3 Steps/mm") #define MSG_E4STEPS _UxGT("E4 Steps/mm") #define MSG_E5STEPS _UxGT("E5 Steps/mm") #define MSG_TEMPERATURE _UxGT("Temperatur") #define MSG_MOTION _UxGT("Bewegung") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") #define MSG_FILAMENT_DIAM _UxGT("Durchm. Filament") #define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm") #define MSG_FILAMENT_LOAD _UxGT("Laden mm") #define MSG_ADVANCE_K _UxGT("Vorschubfaktor") #define MSG_CONTRAST _UxGT("LCD-Kontrast") #define MSG_STORE_EEPROM _UxGT("Konfig. speichern") #define MSG_LOAD_EEPROM _UxGT("Konfig. laden") #define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden") #define MSG_INIT_EEPROM _UxGT("Werkseinstellungen") #define MSG_REFRESH _UxGT("Aktualisieren") #define MSG_WATCH _UxGT("Info") #define MSG_PREPARE _UxGT("Vorbereitung") #define MSG_TUNE _UxGT("Justierung") #define MSG_PAUSE_PRINT _UxGT("SD-Druck pausieren") #define MSG_RESUME_PRINT _UxGT("SD-Druck fortsetzen") #define MSG_STOP_PRINT _UxGT("SD-Druck abbrechen") #define MSG_POWER_LOSS_RECOVERY _UxGT("Wiederh. n. Stroma.") #define MSG_CARD_MENU _UxGT("Druck v. SD-Karte") #define MSG_NO_CARD _UxGT("Keine SD-Karte") #define MSG_DWELL _UxGT("Warten...") #define MSG_USERWAIT _UxGT("Klick zum Fortsetzen") #define MSG_PRINT_PAUSED _UxGT("Druck pausiert...") #define MSG_PRINTING _UxGT("Druckt...") #define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen") #define MSG_NO_MOVE _UxGT("Motoren angeschaltet") #define MSG_KILLED _UxGT("ABGEBROCHEN") #define MSG_STOPPED _UxGT("ANGEHALTEN") #define MSG_CONTROL_RETRACT _UxGT("Rückzug mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Rückzug mm") #define MSG_CONTROL_RETRACTF _UxGT("Rückzug V") #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Sprung mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("Autom. Rückzug") #define MSG_FILAMENTCHANGE _UxGT("Filament wechseln") #define MSG_FILAMENTLOAD _UxGT("Filament laden") #define MSG_FILAMENTUNLOAD _UxGT("Filament entladen") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen") #define MSG_INIT_SDCARD _UxGT("SD-Karte initialisi.") // Manually initialize the SD-card via user interface #define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" #define MSG_ZPROBE_OUT _UxGT("Z-Sonde außerhalb") #define MSG_SKEW_FACTOR _UxGT("Korrekturfaktor") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selbsttest") #define MSG_BLTOUCH_RESET _UxGT("BLTouch zurücks.") #define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren") #define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren") #define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("homen") #define MSG_ZPROBE_ZOFFSET _UxGT("Sondenversatz Z") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstopp Abbr.") #define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN ERFOLGLOS") #define MSG_HEATING_FAILED_LCD_BED _UxGT("Bett heizen fehlge.") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMP-ABWEI.") #define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT") #define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY #define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") #define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("DRUCKER STOPP") #define MSG_PLEASE_RESET _UxGT("Bitte neustarten") #define MSG_SHORT_DAY _UxGT("t") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Extr. heizt...") #define MSG_COOLING _UxGT("Extr. kühlt...") #define MSG_BED_HEATING _UxGT("Bett heizt...") #define MSG_BED_COOLING _UxGT("Bett kühlt...") #define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte") #define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen") #define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Sondenversatz Z") #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod") #define MSG_DELTA_HEIGHT _UxGT("Höhe") #define MSG_DELTA_RADIUS _UxGT("Radius") #define MSG_INFO_MENU _UxGT("Über den Drucker") #define MSG_INFO_PRINTER_MENU _UxGT("Drucker-Info") #define MSG_3POINT_LEVELING _UxGT("3-Punkt-Nivellierung") #define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung") #define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.") #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") #define MSG_MESH_LEVELING _UxGT("Netz-Nivellierung") #define MSG_INFO_STATS_MENU _UxGT("Drucker-Statistik") #define MSG_INFO_BOARD_MENU _UxGT("Board-Info") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren") #define MSG_INFO_EXTRUDERS _UxGT("Extruder") #define MSG_INFO_BAUDRATE _UxGT("Baudrate") #define MSG_INFO_PROTOCOL _UxGT("Protokoll") #define MSG_CASE_LIGHT _UxGT("Beleuchtung") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette Drucke") #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit") #define MSG_INFO_PRINT_LONGEST _UxGT("Längste Druckzeit") #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert") #else #define MSG_INFO_PRINT_COUNT _UxGT("Drucke") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplette") #define MSG_INFO_PRINT_TIME _UxGT("Gesamte") #define MSG_INFO_PRINT_LONGEST _UxGT("Längste") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Netzteil") #define MSG_DRIVE_STRENGTH _UxGT("Motorleistung) #define MSG_DAC_PERCENT _UxGT("Treiber %") #define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT") #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN") #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("FILAMENT ENTLADEN") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:") #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entladen") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Druck weiter") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ") #define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert") #define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert") #define MSG_M600_TOO_COLD _UxGT("M600: zu kalt") // // Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen // ...oder 2 Zeilen auf einem 3-Zeilen-Display. #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf drücken") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("um fortzusetzen") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("bitte warten...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme") #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments...") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entladen des") #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzen des") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Drucks...") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klick zum Heizen") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Entladen...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entladen...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_DE_H