# # Marlin Firmware # config.ini - Options to apply before the build # [config:base] # # ini_use_config - A comma-separated list of actions to apply to the Configuration files. # The actions will be applied in the listed order. # - none # Ignore this file and don't apply any configuration options # # - base # Just apply the options in config:base to the configuration # # - minimal # Just apply the options in config:minimal to the configuration # # - all # Apply all 'config:*' sections in this file to the configuration # # - another.ini # Load another INI file with a path relative to this config.ini file (i.e., within Marlin/) # # - https://me.myserver.com/path/to/configs # Fetch configurations from any URL. # # - example/Creality/Ender-5 Plus @ bugfix-2.1.x # Fetch example configuration files from the MarlinFirmware/Configurations repository # https://raw.githubusercontent.com/MarlinFirmware/Configurations/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/ # # - example/default @ release-2.0.9.7 # Fetch default configuration files from the MarlinFirmware/Configurations repository # https://raw.githubusercontent.com/MarlinFirmware/Configurations/release-2.0.9.7/config/default/ # # - [disable] # Comment out all #defines in both Configuration.h and Configuration_adv.h. This is useful # to start with a clean slate before applying any config: options, so only the options explicitly # set in config.ini will be enabled in the configuration. # # - [flatten] (Not yet implemented) # Produce a flattened set of Configuration.h and Configuration_adv.h files with only the enabled # #defines and no comments. A clean look, but context-free. # ini_use_config = none # Load all config: sections in this file ;ini_use_config = all # Disable everything and apply subsequent config:base options ;ini_use_config = [disable], base # Load config file relative to Marlin/ ;ini_use_config = another.ini # Download configurations from GitHub ;ini_use_config = example/Creality/Ender-5 Plus @ bugfix-2.1.x # Download configurations from your server ;ini_use_config = https://me.myserver.com/path/to/configs # Evaluate config:base and do a config dump ;ini_use_config = base ;config_export = 2 [config:minimal] motherboard = BOARD_RAMPS_14_EFB serial_port = 0 baudrate = 250000 use_watchdog = on thermal_protection_hotends = on thermal_protection_hysteresis = 4 thermal_protection_period = 40 bufsize = 4 block_buffer_size = 16 max_cmd_size = 96 extruders = 1 temp_sensor_0 = 1 temp_hysteresis = 3 heater_0_mintemp = 5 heater_0_maxtemp = 275 preheat_1_temp_hotend = 180 bang_max = 255 pidtemp = on pid_k1 = 0.95 pid_max = BANG_MAX pid_functional_range = 10 default_kp = 22.20 default_ki = 1.08 default_kd = 114.00 x_driver_type = A4988 y_driver_type = A4988 z_driver_type = A4988 e0_driver_type = A4988 x_bed_size = 200 x_min_pos = 0 x_max_pos = X_BED_SIZE y_bed_size = 200 y_min_pos = 0 y_max_pos = Y_BED_SIZE z_min_pos = 0 z_max_pos = 200 x_home_dir = -1 y_home_dir = -1 z_home_dir = -1 use_xmin_plug = on use_ymin_plug = on use_zmin_plug = on x_min_endstop_inverting = false y_min_endstop_inverting = false z_min_endstop_inverting = false default_axis_steps_per_unit = { 80, 80, 400, 500 } axis_relative_modes = { false, false, false, false } default_max_feedrate = { 300, 300, 5, 25 } default_max_acceleration = { 3000, 3000, 100, 10000 } homing_feedrate_mm_m = { (50*60), (50*60), (4*60) } homing_bump_divisor = { 2, 2, 4 } x_enable_on = 0 y_enable_on = 0 z_enable_on = 0 e_enable_on = 0 invert_x_dir = false invert_y_dir = true invert_z_dir = false invert_e0_dir = false invert_e_step_pin = false invert_x_step_pin = false invert_y_step_pin = false invert_z_step_pin = false disable_x = false disable_y = false disable_z = false disable_e = false proportional_font_ratio = 1.0 default_nominal_filament_dia = 1.75 junction_deviation_mm = 0.013 default_acceleration = 3000 default_travel_acceleration = 3000 default_retract_acceleration = 3000 default_minimumfeedrate = 0.0 default_mintravelfeedrate = 0.0 minimum_planner_speed = 0.05 min_steps_per_segment = 6 default_minsegmenttime = 20000 [config:basic] bed_overshoot = 10 busy_while_heating = on default_ejerk = 5.0 default_keepalive_interval = 2 default_leveling_fade_height = 0.0 disable_other_extruders = on display_charset_hd44780 = JAPANESE eeprom_boot_silent = on eeprom_chitchat = on endstoppullups = on extrude_maxlength = 200 extrude_mintemp = 170 host_keepalive_feature = on hotend_overshoot = 15 jd_handle_small_segments = on lcd_info_screen_style = 0 lcd_language = en max_bed_power = 255 mesh_inset = 0 min_software_endstops = on max_software_endstops = on min_software_endstop_x = on min_software_endstop_y = on min_software_endstop_z = on max_software_endstop_x = on max_software_endstop_y = on max_software_endstop_z = on preheat_1_fan_speed = 0 preheat_1_label = "PLA" preheat_1_temp_bed = 70 prevent_cold_extrusion = on prevent_lengthy_extrude = on printjob_timer_autostart = on probing_margin = 10 show_bootscreen = on soft_pwm_scale = 0 string_config_h_author = "(none, default config)" temp_bed_hysteresis = 3 temp_bed_residency_time = 10 temp_bed_window = 1 temp_residency_time = 10 temp_window = 1 validate_homing_endstops = on xy_probe_feedrate = (133*60) z_clearance_between_probes = 5 z_clearance_deploy_probe = 10 z_clearance_multi_probe = 5 [config:advanced] arc_support = on auto_report_temperatures = on autotemp = on autotemp_oldweight = 0.98 bed_check_interval = 5000 default_stepper_timeout_sec = 120 default_volumetric_extruder_limit = 0.00 disable_idle_x = on disable_idle_y = on disable_idle_z = on disable_idle_e = on e0_auto_fan_pin = -1 encoder_100x_steps_per_sec = 80 encoder_10x_steps_per_sec = 30 encoder_rate_multiplier = on extended_capabilities_report = on extruder_auto_fan_speed = 255 extruder_auto_fan_temperature = 50 fanmux0_pin = -1 fanmux1_pin = -1 fanmux2_pin = -1 faster_gcode_parser = on homing_bump_mm = { 5, 5, 2 } max_arc_segment_mm = 1.0 min_arc_segment_mm = 0.1 min_circle_segments = 72 n_arc_correction = 25 serial_overrun_protection = on slowdown = on slowdown_divisor = 2 temp_sensor_bed = 0 thermal_protection_bed_hysteresis = 2 thermocouple_max_errors = 15 tx_buffer_size = 0 watch_bed_temp_increase = 2 watch_bed_temp_period = 60 watch_temp_increase = 2 watch_temp_period = 20