/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

#ifdef __cplusplus
extern "C" { /* C-declarations for C++ */
#endif

#include <stdint.h>
#include <string.h>
#include "lvgl.h"
#include "inc/tft_multi_language.h"
#include "inc/draw_ready_print.h"
#include "inc/draw_language.h"
#include "inc/draw_set.h"
#include "inc/draw_tool.h"
#include "inc/draw_print_file.h"
#include "inc/draw_dialog.h"
#include "inc/draw_printing.h"
#include "inc/draw_opration.h"
#include "inc/draw_preHeat.h"
#include "inc/draw_extrusion.h"
#include "inc/draw_home.h"
#include "inc/draw_move_motor.h"
#include "inc/draw_fan.h"
#include "inc/draw_about.h"
#include "inc/draw_change_speed.h"
#include "inc/draw_manuaLevel.h"
#include "inc/draw_error_message.h"
#include "inc/printer_opration.h"

#define TFT35

#ifdef TFT35

  #define TFT_WIDTH         480
  #define TFT_HEIGHT        320

  #define titleHeight        36   // TFT_screen.title_high
  #define INTERVAL_H          2   // TFT_screen.gap_h // 2
  #define INTERVAL_V          2   // TFT_screen.gap_v // 2
  #define BTN_X_PIXEL       117   // TFT_screen.btn_x_pixel
  #define BTN_Y_PIXEL       140   // TFT_screen.btn_y_pixel

  #define SIMPLE_FIRST_PAGE_GRAP   30

  #define BUTTON_TEXT_Y_OFFSET    -20

  #define TITLE_XPOS          3    //TFT_screen.title_xpos
  #define TITLE_YPOS          5    //TFT_screen.title_ypos

  #define FILE_BTN_CNT        6

  #define OTHER_BTN_XPIEL   117
  #define OTHER_BTN_YPIEL    92

  #define FILE_PRE_PIC_X_OFFSET 8
  #define FILE_PRE_PIC_Y_OFFSET 0

  #define PREVIEW_LITTLE_PIC_SIZE   40910//400*100+9*101+1
  #define PREVIEW_SIZE      202720//(PREVIEW_LITTLE_PIC_SIZE+800*200+201*9+1)

  #define GCFG_FLAG_VALUE   0xEE

#else

  #define TFT_WIDTH     320
  #define TFT_HEIGHT    240

#endif

extern char public_buf_m[100];
extern char public_buf_l[30];

typedef struct {
  uint8_t spi_flash_flag;
  uint8_t multiple_language;
  uint8_t language;
  uint8_t leveling_mode;
  uint8_t from_flash_pic;
  uint8_t finish_power_off;
  uint8_t pause_reprint;
  uint32_t curFilesize;
} CFG_ITMES;

typedef struct {
  uint8_t curTempType : 1,
          curSprayerChoose : 3,
          stepHeat : 4;
  uint8_t leveling_first_time : 1;
  uint8_t extruStep;
  uint8_t extruSpeed;
  uint8_t print_state;
  uint8_t stepPrintSpeed;
  uint8_t waitEndMoves;
  uint16_t moveSpeed;
  float move_dist;
} UI_CFG;

typedef enum {
  MAIN_UI,
  PRINT_READY_UI,
  PRINT_FILE_UI,
  PRINTING_UI,
  MOVE_MOTOR_UI,
  OPERATE_UI,
  PAUSE_UI,
  EXTRUSION_UI,
  FAN_UI,
  PRE_HEAT_UI,
  CHANGE_SPEED_UI,
  TEMP_UI,
  SET_UI,
  ZERO_UI,
  SPRAYER_UI,
  MACHINE_UI,
  LANGUAGE_UI,
  ABOUT_UI,
  LOG_UI,
  DISK_UI,
  CALIBRATE_UI,
  DIALOG_UI,
  WIFI_UI,
  MORE_UI,
  FILETRANSFER_UI,
  FILETRANSFERSTATE_UI,
  PRINT_MORE_UI,
  FILAMENTCHANGE_UI,
  LEVELING_UI,
  MESHLEVELING_UI,
  BIND_UI,
  ZOFFSET_UI,
  TOOL_UI,
  HARDWARE_TEST_UI,
  WIFI_LIST_UI,
  KEY_BOARD_UI,
  TIPS_UI,
  MACHINE_PARA_UI,
  MACHINE_SETTINGS_UI,
  TEMPERATURE_SETTINGS_UI,
  MOTOR_SETTINGS_UI,
  MACHINETYPE_UI,
  STROKE_UI,
  HOME_DIR_UI,
  ENDSTOP_TYPE_UI,
  FILAMENT_SETTINGS_UI,
  LEVELING_SETTIGNS_UI,
  LEVELING_PARA_UI,
  DELTA_LEVELING_PARA_UI,
  XYZ_LEVELING_PARA_UI,
  MAXFEEDRATE_UI,
  STEPS_UI,
  ACCELERATION_UI,
  JERK_UI,
  MOTORDIR_UI,
  HOMESPEED_UI,
  NOZZLE_CONFIG_UI,
  HOTBED_CONFIG_UI,
  ADVANCED_UI,
  DOUBLE_Z_UI,
  ENABLE_INVERT_UI,
  NUMBER_KEY_UI,
  BABY_STEP_UI,
  ERROR_MESSAGE_UI
} DISP_STATE;

typedef struct {
  DISP_STATE _disp_state[100];
  int _disp_index;
} DISP_STATE_STACK;

typedef struct {
  int16_t days;
  uint16_t hours;
  uint8_t minutes;
  volatile int8_t seconds;
  int8_t ms_10;
  int8_t start;
} PRINT_TIME;
extern PRINT_TIME print_time;

extern CFG_ITMES gCfgItems;
extern UI_CFG uiCfg;
extern DISP_STATE disp_state;
extern DISP_STATE last_disp_state;
extern DISP_STATE_STACK disp_state_stack;

extern lv_style_t tft_style_scr;
extern lv_style_t tft_style_lable_pre;
extern lv_style_t tft_style_lable_rel;

extern void gCfgItems_init();
extern void ui_cfg_init();
extern void tft_style_init();
extern char *creat_title_text(void);
extern void preview_gcode_prehandle(char *path);
extern void update_spi_flash();
extern void disp_pre_gcode(int xpos_pixel, int ypos_pixel);
extern void GUI_RefreshPage();
extern void clear_cur_ui();
extern void draw_return_ui();
extern void sd_detection();
extern void gCfg_to_spiFlah();
extern void print_time_count();

extern void LV_TASK_HANDLER();

#ifdef __cplusplus
} /* C-declarations for C++ */
#endif