MarlinFirmware

mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-25 12:57:53 +00:00

History

Slawomir Ciunczyk 167058b61f Different NEOPIXEL types Changes to support NEOPIXEL LED strips - Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h - ability to setup startup brightness - ability to define sequential/non-sequential transition of color change during heating-up - additional parameter to M150 P<brightness>	2017-10-10 01:58:40 -05:00
..
Configuration.h	Different NEOPIXEL types	2017-10-10 01:58:40 -05:00
README.txt

Slawomir Ciunczyk 167058b61f Different NEOPIXEL types

Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>

2017-10-10 01:58:40 -05:00

Configuration.h

Different NEOPIXEL types

2017-10-10 01:58:40 -05:00

README.txt

This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.

(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)

The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.

The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...

Have fun!
--
tobi