3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 20:18:52 +00:00
Code Issues Releases Wiki Activity
0c2cefed8f
MarlinFirmware/Marlin/example_configurations/SCARA
History
Scott Lahteine e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
..
Configuration_adv.h Increase BABYSTEP_MULTIPLICATOR to 100 2017-09-27 00:14:26 -05:00
Configuration.h Update links to old wiki page 2017-09-23 22:06:45 -05:00