1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
MarlinFirmware/Marlin/language_an.h
2017-05-28 12:52:24 -05:00

255 lines
14 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Aragonese
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_AN_H
#define LANGUAGE_AN_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME _UxGT(" parada.")
#define MSG_SD_INSERTED _UxGT("Tarcheta mesa")
#define MSG_SD_REMOVED _UxGT("Tarcheta sacada")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Menu prencipal")
#define MSG_AUTOSTART _UxGT("Inicio automatico")
#define MSG_DISABLE_STEPPERS _UxGT("Amortar motors")
#define MSG_AUTO_HOME _UxGT("Levar a l'orichen")
#define MSG_AUTO_HOME_X _UxGT("Orichen X")
#define MSG_AUTO_HOME_Y _UxGT("Orichen Y")
#define MSG_AUTO_HOME_Z _UxGT("Orichen Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Orichen XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Encetar (pretar)")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Vinient punto")
#define MSG_LEVEL_BED_DONE _UxGT("Nivelacion feita!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Cancelar")
#define MSG_SET_HOME_OFFSETS _UxGT("Achustar desfases")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicau")
#define MSG_SET_ORIGIN _UxGT("Establir orichen")
#define MSG_PREHEAT_1 _UxGT("Precalentar PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Base")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf")
#define MSG_PREHEAT_2 _UxGT("Precalentar ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Base")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Conf")
#define MSG_COOLDOWN _UxGT("Enfriar")
#define MSG_SWITCH_PS_ON _UxGT("Enchegar Fuent")
#define MSG_SWITCH_PS_OFF _UxGT("Amortar Fuent")
#define MSG_EXTRUDE _UxGT("Extruir")
#define MSG_RETRACT _UxGT("Retraer")
#define MSG_MOVE_AXIS _UxGT("Mover Eixes")
#define MSG_LEVEL_BED _UxGT("Nivelar base")
#define MSG_MOVE_X _UxGT("Mover X")
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")
#define MSG_SPEED _UxGT("Velocidat")
#define MSG_BED_Z _UxGT("Base Z")
#define MSG_NOZZLE _UxGT("Boquilla")
#define MSG_BED _UxGT("Base")
#define MSG_FAN_SPEED _UxGT("Ixoriador")
#define MSG_FLOW _UxGT("Fluxo")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Temperatura Auto.")
#define MSG_ON _UxGT("On")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Trigar")
#define MSG_ACC _UxGT("Aceleracion")
#define MSG_JERK _UxGT("Jerk")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("Vel. viache min")
#define MSG_ACCELERATION MSG_ACC
#define MSG_AMAX _UxGT("Acel. max")
#define MSG_A_RETRACT _UxGT("Acel. retrac.")
#define MSG_A_TRAVEL _UxGT("Acel. Viaje")
#define MSG_STEPS_PER_MM _UxGT("Trangos/mm")
#define MSG_XSTEPS _UxGT("X trangos/mm")
#define MSG_YSTEPS _UxGT("Y trangos/mm")
#define MSG_ZSTEPS _UxGT("Z trangos/mm")
#define MSG_ESTEPS _UxGT("E trangos/mm")
#define MSG_E1STEPS _UxGT("E1 trangos/mm")
#define MSG_E2STEPS _UxGT("E2 trangos/mm")
#define MSG_E3STEPS _UxGT("E3 trangos/mm")
#define MSG_E4STEPS _UxGT("E4 trangos/mm")
#define MSG_E5STEPS _UxGT("E5 trangos/mm")
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimiento")
#define MSG_FILAMENT _UxGT("Filamento")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Contraste")
#define MSG_STORE_EEPROM _UxGT("Alzar memoria")
#define MSG_LOAD_EEPROM _UxGT("Cargar memoria")
#define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria")
#define MSG_REFRESH _UxGT("Tornar a cargar")
#define MSG_WATCH _UxGT("Informacion")
#define MSG_PREPARE _UxGT("Preparar")
#define MSG_TUNE _UxGT("Achustar")
#define MSG_PAUSE_PRINT _UxGT("Pausar impresion")
#define MSG_RESUME_PRINT _UxGT("Contin. impresion")
#define MSG_STOP_PRINT _UxGT("Detener Impresion")
#define MSG_CARD_MENU _UxGT("Menu de SD")
#define MSG_NO_CARD _UxGT("No i hai tarcheta")
#define MSG_DWELL _UxGT("Reposo...")
#define MSG_USERWAIT _UxGT("Aguardand ordines")
#define MSG_RESUMING _UxGT("Contin. impresion")
#define MSG_PRINT_ABORTED _UxGT("Impres. cancelada")
#define MSG_NO_MOVE _UxGT("Sin movimiento")
#define MSG_KILLED _UxGT("Aturada d'emerch.")
#define MSG_STOPPED _UxGT("Aturada.")
#define MSG_CONTROL_RETRACT _UxGT("Retraer mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retraer mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retraer F")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Devantar mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet F")
#define MSG_AUTORETRACT _UxGT("Retraccion auto.")
#define MSG_FILAMENTCHANGE _UxGT("Cambear filamento")
#define MSG_INIT_SDCARD _UxGT("Encetan. tarcheta")
#define MSG_CNG_SDCARD _UxGT("Cambiar tarcheta")
#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z")
#define MSG_BABYSTEP_X _UxGT("Micropaso X")
#define MSG_BABYSTEP_Y _UxGT("Micropaso Y")
#define MSG_BABYSTEP_Z _UxGT("Micropaso Z")
#define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop")
#define MSG_HEATING_FAILED_LCD _UxGT("Error: en calentar")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura")
#define MSG_THERMAL_RUNAWAY _UxGT("Error de temperatura")
#define MSG_ERR_MAXTEMP _UxGT("Error: Temp Maxima")
#define MSG_ERR_MINTEMP _UxGT("Error: Temp Menima")
#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max base")
#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min base")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z vedau")
#define MSG_HALTED _UxGT("IMPRESORA ATURADA")
#define MSG_PLEASE_RESET _UxGT("Per favor reinic.")
#define MSG_SHORT_DAY _UxGT("d")
#define MSG_SHORT_HOUR _UxGT("h")
#define MSG_SHORT_MINUTE _UxGT("m")
#define MSG_HEATING _UxGT("Calentando...")
#define MSG_HEATING_COMPLETE _UxGT("Calentamiento listo")
#define MSG_BED_HEATING _UxGT("Calentando base...")
#define MSG_BED_DONE _UxGT("Base calient")
#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro")
#define MSG_INFO_MENU _UxGT("Inf. Impresora")
#define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora")
#define MSG_INFO_STATS_MENU _UxGT("Estadisticas Imp.")
#define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extrusors")
#define MSG_INFO_BAUDRATE _UxGT("Baudios")
#define MSG_INFO_PROTOCOL _UxGT("Protocolo")
#define MSG_LIGHTS_ON _UxGT("Enchegar luz")
#define MSG_LIGHTS_OFF _UxGT("Desenchegar luz")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
#define MSG_INFO_PRINT_TIME _UxGT("Tiempo total d'imp.")
#define MSG_INFO_PRINT_LONGEST _UxGT("Impresion mas larga")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total d'extrusion")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Impresions")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas")
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Temperatura menima")
#define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima")
#define MSG_INFO_PSU _UxGT("Fuente de aliment")
#define MSG_DRIVE_STRENGTH _UxGT("Fuerza d'o driver")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Escri. DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Aguardand iniciar")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y prete lo boton")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o filamento")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambear")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pa continar...")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o fil. cambear")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento")
#endif // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Aguardando a")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("expulsar filament")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Aguardando a")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Aguardando a")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extruir filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar")
#endif // LANGUAGE_AN_H