1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-11 21:14:34 +00:00
MarlinFirmware/Marlin/thermistortable_6.h
2016-12-19 14:47:54 -08:00

64 lines
2.2 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
// 100k Epcos thermistor
const short temptable_6[][2] PROGMEM = {
{ 1 * OVERSAMPLENR, 350 },
{ 28 * OVERSAMPLENR, 250 }, // top rating 250C
{ 31 * OVERSAMPLENR, 245 },
{ 35 * OVERSAMPLENR, 240 },
{ 39 * OVERSAMPLENR, 235 },
{ 42 * OVERSAMPLENR, 230 },
{ 44 * OVERSAMPLENR, 225 },
{ 49 * OVERSAMPLENR, 220 },
{ 53 * OVERSAMPLENR, 215 },
{ 62 * OVERSAMPLENR, 210 },
{ 71 * OVERSAMPLENR, 205 }, // fitted graphically
{ 78 * OVERSAMPLENR, 200 }, // fitted graphically
{ 94 * OVERSAMPLENR, 190 },
{ 102 * OVERSAMPLENR, 185 },
{ 116 * OVERSAMPLENR, 170 },
{ 143 * OVERSAMPLENR, 160 },
{ 183 * OVERSAMPLENR, 150 },
{ 223 * OVERSAMPLENR, 140 },
{ 270 * OVERSAMPLENR, 130 },
{ 318 * OVERSAMPLENR, 120 },
{ 383 * OVERSAMPLENR, 110 },
{ 413 * OVERSAMPLENR, 105 },
{ 439 * OVERSAMPLENR, 100 },
{ 484 * OVERSAMPLENR, 95 },
{ 513 * OVERSAMPLENR, 90 },
{ 607 * OVERSAMPLENR, 80 },
{ 664 * OVERSAMPLENR, 70 },
{ 781 * OVERSAMPLENR, 60 },
{ 810 * OVERSAMPLENR, 55 },
{ 849 * OVERSAMPLENR, 50 },
{ 914 * OVERSAMPLENR, 45 },
{ 914 * OVERSAMPLENR, 40 },
{ 935 * OVERSAMPLENR, 35 },
{ 954 * OVERSAMPLENR, 30 },
{ 970 * OVERSAMPLENR, 25 },
{ 978 * OVERSAMPLENR, 22 },
{ 1008 * OVERSAMPLENR, 3 },
{ 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C
};