mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-13 14:01:52 +00:00
291 lines
7.8 KiB
C
291 lines
7.8 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#if !defined(__STM32F1__) && !defined(__STM32F4__)
|
|
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
|
|
#endif
|
|
|
|
/**
|
|
* 21017 Victor Perez Marlin for stm32f1 test
|
|
*/
|
|
|
|
#define DEFAULT_MACHINE_NAME "STM32F103RET6"
|
|
#define BOARD_NAME "Marlin for STM32"
|
|
|
|
// Enable I2C_EEPROM for testing
|
|
#define I2C_EEPROM
|
|
|
|
// Ignore temp readings during develpment.
|
|
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN PE0
|
|
#define X_DIR_PIN PE1
|
|
#define X_ENABLE_PIN PC0
|
|
#define X_MIN_PIN PD5
|
|
#define X_MAX_PIN -1
|
|
|
|
#define Y_STEP_PIN PE2
|
|
#define Y_DIR_PIN PE3
|
|
#define Y_ENABLE_PIN PC1
|
|
#define Y_MIN_PIN PD6
|
|
#define Y_MAX_PIN
|
|
|
|
#define Z_STEP_PIN PE4
|
|
#define Z_DIR_PIN PE5
|
|
#define Z_ENABLE_PIN PC2
|
|
#define Z_MIN_PIN PD7
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define Y2_STEP_PIN -1
|
|
#define Y2_DIR_PIN -1
|
|
#define Y2_ENABLE_PIN -1
|
|
|
|
#define Z2_STEP_PIN -1
|
|
#define Z2_DIR_PIN -1
|
|
#define Z2_ENABLE_PIN -1
|
|
|
|
#define E0_STEP_PIN PE6
|
|
#define E0_DIR_PIN PE7
|
|
#define E0_ENABLE_PIN PC3
|
|
|
|
/**
|
|
* TODO: Currently using same Enable pin to all steppers.
|
|
*/
|
|
|
|
#define E1_STEP_PIN PE8
|
|
#define E1_DIR_PIN PE9
|
|
#define E1_ENABLE_PIN PC4
|
|
|
|
#define E2_STEP_PIN PE10
|
|
#define E2_DIR_PIN PE11
|
|
#define E2_ENABLE_PIN PC5
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define SDPOWER -1
|
|
#define SDSS PA15
|
|
#define LED_PIN PB2
|
|
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN PD12 // EXTRUDER 1
|
|
#define HEATER_1_PIN PD13
|
|
#define HEATER_2_PIN PD14
|
|
|
|
#define HEATER_BED_PIN PB9 // BED
|
|
#define HEATER_BED2_PIN -1 // BED2
|
|
#define HEATER_BED3_PIN -1 // BED3
|
|
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN PB10
|
|
#endif
|
|
|
|
#define FAN_SOFT_PWM
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_BED_PIN PA0 // ANALOG NUMBERING
|
|
#define TEMP_0_PIN PA1 // ANALOG NUMBERING
|
|
#define TEMP_1_PIN PA2 // ANALOG NUMBERING
|
|
#define TEMP_2_PIN PA3 // ANALOG NUMBERING
|
|
|
|
//
|
|
// LCD Pins
|
|
//
|
|
#if ENABLED(ULTRA_LCD)
|
|
|
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
|
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
|
|
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
|
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
|
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
|
|
#define LCD_PINS_RS PB8
|
|
#define LCD_PINS_ENABLE PD2
|
|
#define LCD_PINS_D4 PB12
|
|
#define LCD_PINS_D5 PB13
|
|
#define LCD_PINS_D6 PB14
|
|
#define LCD_PINS_D7 PB15
|
|
#else
|
|
#define LCD_PINS_RS PB8
|
|
#define LCD_PINS_ENABLE PD2
|
|
#define LCD_PINS_D4 PB12
|
|
#define LCD_PINS_D5 PB13
|
|
#define LCD_PINS_D6 PB14
|
|
#define LCD_PINS_D7 PB15
|
|
#if DISABLED(NEWPANEL)
|
|
#define BEEPER_PIN 33
|
|
// Buttons are attached to a shift register
|
|
// Not wired yet
|
|
//#define SHIFT_CLK 38
|
|
//#define SHIFT_LD 42
|
|
//#define SHIFT_OUT 40
|
|
//#define SHIFT_EN 17
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
|
|
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
|
|
|
#define BEEPER_PIN 37
|
|
|
|
#define BTN_EN1 31
|
|
#define BTN_EN2 33
|
|
#define BTN_ENC 35
|
|
|
|
#define SD_DETECT_PIN 49
|
|
#define KILL_PIN 41
|
|
|
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
|
#define LCD_BACKLIGHT_PIN 39
|
|
#endif
|
|
|
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
|
|
|
#define BTN_EN1 64
|
|
#define BTN_EN2 59
|
|
#define BTN_ENC 63
|
|
#define SD_DETECT_PIN 42
|
|
|
|
#elif ENABLED(LCD_I2C_PANELOLU2)
|
|
|
|
#define BTN_EN1 47
|
|
#define BTN_EN2 43
|
|
#define BTN_ENC 32
|
|
#define LCD_SDSS 53
|
|
#define SD_DETECT_PIN -1
|
|
#define KILL_PIN 41
|
|
|
|
#elif ENABLED(LCD_I2C_VIKI)
|
|
|
|
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
|
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
|
|
|
|
#define BTN_ENC -1
|
|
#define LCD_SDSS 53
|
|
#define SD_DETECT_PIN 49
|
|
|
|
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
|
|
|
|
#define BEEPER_PIN 33
|
|
|
|
// Pins for DOGM SPI LCD Support
|
|
#define DOGLCD_A0 44
|
|
#define DOGLCD_CS 45
|
|
#define LCD_SCREEN_ROT_180
|
|
|
|
#define BTN_EN1 22
|
|
#define BTN_EN2 7
|
|
#define BTN_ENC 39
|
|
|
|
#define SDSS 53
|
|
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
|
|
|
|
#define KILL_PIN 31
|
|
|
|
#define STAT_LED_RED_PIN 32
|
|
#define STAT_LED_BLUE_PIN 35
|
|
|
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
|
|
|
#define BTN_EN1 35
|
|
#define BTN_EN2 37
|
|
#define BTN_ENC 31
|
|
#define SD_DETECT_PIN 49
|
|
#define LCD_SDSS 53
|
|
#define KILL_PIN 41
|
|
#define BEEPER_PIN 23
|
|
#define DOGLCD_CS 29
|
|
#define DOGLCD_A0 27
|
|
#define LCD_BACKLIGHT_PIN 33
|
|
|
|
#elif ENABLED(MINIPANEL)
|
|
|
|
#define BEEPER_PIN 42
|
|
// Pins for DOGM SPI LCD Support
|
|
#define DOGLCD_A0 44
|
|
#define DOGLCD_CS 66
|
|
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
|
|
#define SDSS 53
|
|
|
|
#define KILL_PIN 64
|
|
// GLCD features
|
|
//#define LCD_CONTRAST 190
|
|
// Uncomment screen orientation
|
|
//#define LCD_SCREEN_ROT_90
|
|
//#define LCD_SCREEN_ROT_180
|
|
//#define LCD_SCREEN_ROT_270
|
|
// The encoder and click button
|
|
#define BTN_EN1 40
|
|
#define BTN_EN2 63
|
|
#define BTN_ENC 59
|
|
// not connected to a pin
|
|
#define SD_DETECT_PIN 49
|
|
|
|
#else
|
|
|
|
// Beeper on AUX-4
|
|
#define BEEPER_PIN 33
|
|
|
|
// buttons are directly attached using AUX-2
|
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
|
#define BTN_EN1 64
|
|
#define BTN_EN2 59
|
|
#define BTN_ENC 63
|
|
#define SHIFT_OUT 40
|
|
#define SHIFT_CLK 44
|
|
#define SHIFT_LD 42
|
|
#elif ENABLED(PANEL_ONE)
|
|
#define BTN_EN1 59 // AUX2 PIN 3
|
|
#define BTN_EN2 63 // AUX2 PIN 4
|
|
#define BTN_ENC 49 // AUX3 PIN 7
|
|
#else
|
|
#define BTN_EN1 37
|
|
#define BTN_EN2 35
|
|
#define BTN_ENC 31
|
|
#endif
|
|
|
|
#if ENABLED(G3D_PANEL)
|
|
#define SD_DETECT_PIN 49
|
|
#define KILL_PIN 41
|
|
#else
|
|
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
|
|
#endif
|
|
|
|
#endif
|
|
#endif // NEWPANEL
|
|
|
|
#endif // ULTRA_LCD
|
|
|
|
#define U_MIN_PIN -1
|
|
#define V_MIN_PIN -1
|
|
#define W_MIN_PIN -1
|