3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity
1026e5b071
MarlinFirmware/Marlin/language_fr.h
Scott Lahteine 1026e5b071 Replace PLA/ABS preheating with generic
2016-07-09 18:06:51 -07:00

175 lines
9.0 KiB
C
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* French
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_FR_H
#define LANGUAGE_FR_H
#define MAPPER_NON
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " prete."
#define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree"
#define MSG_MAIN "Menu principal"
#define MSG_AUTOSTART "Demarrage auto"
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
#define MSG_AUTO_HOME "Origine auto."
#define MSG_LEVEL_BED_HOMING "Origine XYZ"
#define MSG_LEVEL_BED_WAITING "Cliquer pour commencer"
#define MSG_LEVEL_BED_DONE "Mise a niveau OK!"
#define MSG_LEVEL_BED_CANCEL "Annuler"
#define MSG_SET_HOME_OFFSETS "Regler decal. origine"
#define MSG_HOME_OFFSETS_APPLIED "Decalages appliques"
#define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_1 "Prechauffage PLA"
#define MSG_PREHEAT_1_N "Prechauff. PLA "
#define MSG_PREHEAT_1_ALL "Prech. PLA Tout"
#define MSG_PREHEAT_1_BEDONLY "Prech. PLA Plateau"
#define MSG_PREHEAT_1_SETTINGS "Regl. prech. PLA"
#define MSG_PREHEAT_2 "Prechauffage ABS"
#define MSG_PREHEAT_2_N "Prechauff. ABS "
#define MSG_PREHEAT_2_ALL "Prech. ABS Tout"
#define MSG_PREHEAT_2_BEDONLY "Prech. ABS Plateau"
#define MSG_PREHEAT_2_SETTINGS "Regl. prech. ABS"
#define MSG_COOLDOWN "Refroidir"
#define MSG_SWITCH_PS_ON "Allumer alim."
#define MSG_SWITCH_PS_OFF "Eteindre alim."
#define MSG_EXTRUDE "Extrusion"
#define MSG_RETRACT "Retraction"
#define MSG_MOVE_AXIS "Deplacer un axe"
#define MSG_LEVEL_BED "Regl. Niv. Plateau"
#define MSG_MOVE_X "Depl. X"
#define MSG_MOVE_Y "Depl. Y"
#define MSG_MOVE_Z "Depl. Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Depl. 0.1mm"
#define MSG_MOVE_1MM "Depl. 1mm"
#define MSG_MOVE_10MM "Depl. 10mm"
#define MSG_SPEED " Vitesse"
#define MSG_BED_Z "Plateau Z"
#define MSG_NOZZLE "Buse"
#define MSG_BED "Plateau"
#define MSG_FAN_SPEED "Vite. ventilateur"
#define MSG_FLOW "Flux"
#define MSG_CONTROL "Controler"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Facteur"
#define MSG_AUTOTEMP "Temp. Auto."
#define MSG_ON "Marche "
#define MSG_OFF "Arret"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax"
#define MSG_X "X"
#define MSG_Y "Y"
#define MSG_Z "Z"
#define MSG_E "E"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vdepl min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-Depl."
#define MSG_XSTEPS "Xpas/mm"
#define MSG_YSTEPS "Ypas/mm"
#define MSG_ZSTEPS "Zpas/mm"
#define MSG_ESTEPS "Epas/mm"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Mouvement"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E en mm3"
#define MSG_FILAMENT_DIAM "Diam. Fil."
#define MSG_CONTRAST "Contraste LCD"
#define MSG_STORE_EPROM "Sauver config"
#define MSG_LOAD_EPROM "Lire config"
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
#define MSG_REFRESH "Actualiser"
#define MSG_WATCH "Surveiller"
#define MSG_PREPARE "Preparer"
#define MSG_TUNE "Regler"
#define MSG_PAUSE_PRINT "Interrompre impr."
#define MSG_RESUME_PRINT "Reprendre impr."
#define MSG_STOP_PRINT "Arreter impr."
#define MSG_CARD_MENU "Impr. depuis SD"
#define MSG_NO_CARD "Pas de carte"
#define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Atten. de l'util."
#define MSG_RESUMING "Repri. de l'impr."
#define MSG_PRINT_ABORTED "Impr. Annulee"
#define MSG_NO_MOVE "Aucun mouvement."
#define MSG_KILLED "MORT."
#define MSG_STOPPED "STOPPE."
#define MSG_CONTROL_RETRACT "Retraction mm"
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
#define MSG_CONTROL_RETRACTF "Retraction V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "Retract. Auto."
#define MSG_FILAMENTCHANGE "Changer filament"
#define MSG_INIT_SDCARD "Init. la carte SD"
#define MSG_CNG_SDCARD "Changer de carte"
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Decalage Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Butee abandon"
#define MSG_HEATING_FAILED_LCD "Erreur de chauffe"
#define MSG_ERR_REDUNDANT_TEMP "Err: ERREUR TEMP. REDONDANTE"
#define MSG_THERMAL_RUNAWAY "EMBALLEMENT THERMIQUE"
#define MSG_ERR_MAXTEMP "Err: TEMP. MAX"
#define MSG_ERR_MINTEMP "Err: TEMP. MIN"
#define MSG_ERR_MAXTEMP_BED "Err: TEMP. MAX PLATEAU"
#define MSG_ERR_MINTEMP_BED "Err: TEMP. MIN PLATEAU"
#define MSG_END_HOUR "heures"
#define MSG_END_MINUTE "minutes"
#define MSG_HEATING "En chauffe..."
#define MSG_HEATING_COMPLETE "Chauffe terminee"
#define MSG_BED_HEATING "Plateau en chauffe..."
#define MSG_BED_DONE "Chauffe plateau terminee"
#define MSG_DELTA_CALIBRATE "Calibration Delta"
#define MSG_DELTA_CALIBRATE_X "Calibrer X"
#define MSG_DELTA_CALIBRATE_Y "Calibrer Y"
#define MSG_DELTA_CALIBRATE_Z "Calibrer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibrer centre"
#endif // LANGUAGE_FR_H
Reference in New Issue View Git Blame Copy Permalink