mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-30 23:30:16 +00:00
3c927901a4
FW retraction is extended onto swap retraction invoked by 'G10 S1'. Bookkeeping of the retract state of all extruders allows for having one extruder fw standard retracted while another extruder is swap retracted. An LCD menu item for the swap retract and recover length was added.
2706 lines
114 KiB
C
2706 lines
114 KiB
C
#ifndef LANGUAGE_H
|
||
#define LANGUAGE_H
|
||
|
||
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
|
||
//
|
||
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
||
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
|
||
|
||
// Languages
|
||
// 1 English
|
||
// 2 Polish
|
||
// 3 French
|
||
// 4 German
|
||
// 5 Spanish
|
||
// 6 Russian
|
||
// 7 Italian
|
||
// 8 Portuguese
|
||
// 9 Finnish
|
||
// 10 Aragonese
|
||
// 11 Dutch
|
||
// 12 Catalan
|
||
// 13 Basque-Euskera
|
||
|
||
#ifndef LANGUAGE_CHOICE
|
||
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
|
||
#endif
|
||
|
||
#define PROTOCOL_VERSION "1.0"
|
||
|
||
#if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72
|
||
#define MACHINE_NAME "Ultimaker"
|
||
#define FIRMWARE_URL "http://firmware.ultimaker.com"
|
||
#elif MOTHERBOARD == 80
|
||
#define MACHINE_NAME "Rumba"
|
||
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
||
#elif MOTHERBOARD == 77
|
||
#define MACHINE_NAME "3Drag"
|
||
#define FIRMWARE_URL "http://3dprint.elettronicain.it/"
|
||
#elif MOTHERBOARD == 88
|
||
#define MACHINE_NAME "Makibox"
|
||
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
||
#else
|
||
#ifdef CUSTOM_MENDEL_NAME
|
||
#define MACHINE_NAME CUSTOM_MENDEL_NAME
|
||
#else
|
||
#define MACHINE_NAME "Mendel"
|
||
#endif
|
||
|
||
// Default firmware set to Mendel
|
||
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
||
#endif
|
||
|
||
|
||
#ifndef MACHINE_UUID
|
||
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||
#endif
|
||
|
||
|
||
#define STRINGIFY_(n) #n
|
||
#define STRINGIFY(n) STRINGIFY_(n)
|
||
|
||
|
||
// Common LCD messages
|
||
/* nothing here as of yet */
|
||
|
||
// Common serial messages
|
||
#define MSG_MARLIN "Marlin"
|
||
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 1
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " ready."
|
||
#define MSG_SD_INSERTED "Card inserted"
|
||
#define MSG_SD_REMOVED "Card removed"
|
||
#define MSG_MAIN "Main"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Disable steppers"
|
||
#define MSG_AUTO_HOME "Auto home"
|
||
#define MSG_SET_ORIGIN "Set origin"
|
||
#define MSG_PREHEAT_PLA "Preheat PLA"
|
||
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Preheat PLA All"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
|
||
#define MSG_PREHEAT_ABS "Preheat ABS"
|
||
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Preheat ABS All"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
|
||
#define MSG_COOLDOWN "Cooldown"
|
||
#define MSG_SWITCH_PS_ON "Switch power on"
|
||
#define MSG_SWITCH_PS_OFF "Switch power off"
|
||
#define MSG_EXTRUDE "Extrude"
|
||
#define MSG_RETRACT "Retract"
|
||
#define MSG_MOVE_AXIS "Move axis"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Speed"
|
||
#define MSG_NOZZLE "Nozzle"
|
||
#define MSG_NOZZLE1 "Nozzle2"
|
||
#define MSG_NOZZLE2 "Nozzle3"
|
||
#define MSG_BED "Bed"
|
||
#define MSG_FAN_SPEED "Fan speed"
|
||
#define MSG_FLOW "Flow"
|
||
#define MSG_FLOW0 "Flow 0"
|
||
#define MSG_FLOW1 "Flow 1"
|
||
#define MSG_FLOW2 "Flow 2"
|
||
#define MSG_CONTROL "Control"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Fact"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Accel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract"
|
||
#define MSG_XSTEPS "Xsteps/mm"
|
||
#define MSG_YSTEPS "Ysteps/mm"
|
||
#define MSG_ZSTEPS "Zsteps/mm"
|
||
#define MSG_ESTEPS "Esteps/mm"
|
||
#define MSG_RECTRACT "Rectract"
|
||
#define MSG_TEMPERATURE "Temperature"
|
||
#define MSG_MOTION "Motion"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "Store memory"
|
||
#define MSG_LOAD_EPROM "Load memory"
|
||
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
|
||
#define MSG_REFRESH "Refresh"
|
||
#define MSG_WATCH "Info screen"
|
||
#define MSG_PREPARE "Prepare"
|
||
#define MSG_TUNE "Tune"
|
||
#define MSG_PAUSE_PRINT "Pause print"
|
||
#define MSG_RESUME_PRINT "Resume print"
|
||
#define MSG_STOP_PRINT "Stop print"
|
||
#define MSG_CARD_MENU "Print from SD"
|
||
#define MSG_NO_CARD "No SD card"
|
||
#define MSG_DWELL "Sleep..."
|
||
#define MSG_USERWAIT "Wait for user..."
|
||
#define MSG_RESUMING "Resuming print"
|
||
#define MSG_NO_MOVE "No move."
|
||
#define MSG_KILLED "KILLED. "
|
||
#define MSG_STOPPED "STOPPED. "
|
||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Change filament"
|
||
#define MSG_INIT_SDCARD "Init. SD card"
|
||
#define MSG_CNG_SDCARD "Change SD card"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " External Reset"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||
#define MSG_FREE_MEMORY " Free Memory: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Done saving file."
|
||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
||
#define MSG_FILE_PRINTED "Done printing file"
|
||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||
#define MSG_END_FILE_LIST "End file list"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||
#define MSG_HEATING "Heating..."
|
||
#define MSG_HEATING_COMPLETE "Heating done."
|
||
#define MSG_BED_HEATING "Bed Heating."
|
||
#define MSG_BED_DONE "Bed done."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Count X: "
|
||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
||
#define MSG_RESEND "Resend: "
|
||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Reporting endstop status"
|
||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||
#define MSG_ENDSTOP_OPEN "open"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||
#define MSG_SD_FILE_OPENED "File opened: "
|
||
#define MSG_SD_SIZE " Size: "
|
||
#define MSG_SD_FILE_SELECTED "File selected"
|
||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 2
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " gotowy."
|
||
#define MSG_SD_INSERTED "Karta wlozona"
|
||
#define MSG_SD_REMOVED "Karta usunieta"
|
||
#define MSG_MAIN "Menu glowne"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
||
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
||
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
||
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
|
||
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
|
||
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
|
||
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
|
||
#define MSG_COOLDOWN "Chlodzenie"
|
||
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
||
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
|
||
#define MSG_EXTRUDE "Ekstruzja"
|
||
#define MSG_RETRACT "Cofanie"
|
||
#define MSG_MOVE_AXIS "Ruch osi"
|
||
#define MSG_MOVE_X "Przesun w X"
|
||
#define MSG_MOVE_Y "Przesun w Y"
|
||
#define MSG_MOVE_Z "Przesun w Z"
|
||
#define MSG_MOVE_E "Ekstruzja (os E)"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
|
||
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
|
||
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
|
||
#define MSG_SPEED "Predkosc"
|
||
#define MSG_NOZZLE "Dysza"
|
||
#define MSG_NOZZLE1 "Dysza 2"
|
||
#define MSG_NOZZLE2 "Dysza 3"
|
||
#define MSG_BED "Loze"
|
||
#define MSG_FAN_SPEED "Obroty wiatraka"
|
||
#define MSG_FLOW "Przeplyw"
|
||
#define MSG_FLOW0 "Przeplyw 0"
|
||
#define MSG_FLOW1 "Przeplyw 1"
|
||
#define MSG_FLOW2 "Przeplyw 2"
|
||
#define MSG_CONTROL "Kontrola"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Mnoznik"
|
||
#define MSG_AUTOTEMP "Auto. temperatura"
|
||
#define MSG_ON "Wl. "
|
||
#define MSG_OFF "Wyl."
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Przyspieszenie"
|
||
#define MSG_VXY_JERK "Zryw Vxy"
|
||
#define MSG_VZ_JERK "Zryw Vz"
|
||
#define MSG_VE_JERK "Zryw Ve"
|
||
#define MSG_VMAX "Vmax"
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "Vskok min"
|
||
#define MSG_AMAX "Amax"
|
||
#define MSG_A_RETRACT "A-wycofanie"
|
||
#define MSG_XSTEPS "krokiX/mm"
|
||
#define MSG_YSTEPS "krokiY/mm"
|
||
#define MSG_ZSTEPS "krokiZ/mm"
|
||
#define MSG_ESTEPS "krokiE/mm"
|
||
#define MSG_RECTRACT "Wycofanie"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Ruch"
|
||
#define MSG_CONTRAST "Kontrast LCD"
|
||
#define MSG_STORE_EPROM "Zapisz w pamieci"
|
||
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
|
||
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
|
||
#define MSG_REFRESH "\004Odswiez"
|
||
#define MSG_WATCH "Ekran glowny"
|
||
#define MSG_PREPARE "Przygotuj"
|
||
#define MSG_CONTROL "Ustawienia"
|
||
#define MSG_TUNE "Strojenie"
|
||
#define MSG_PAUSE_PRINT "Pauza"
|
||
#define MSG_RESUME_PRINT "Wznowienie"
|
||
#define MSG_STOP_PRINT "Stop"
|
||
#define MSG_CARD_MENU "Menu karty SD"
|
||
#define MSG_NO_CARD "Brak karty"
|
||
#define MSG_DWELL "Uspij..."
|
||
#define MSG_USERWAIT "Oczekiwanie..."
|
||
#define MSG_RESUMING "Wznawianie druku"
|
||
#define MSG_NO_MOVE "Brak ruchu"
|
||
#define MSG_KILLED "Ubity. "
|
||
#define MSG_STOPPED "Zatrzymany. "
|
||
#define MSG_STEPPER_RELEASED "Zwolniony."
|
||
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
||
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
||
#define MSG_AUTORETRACT "Auto. wycofanie"
|
||
#define MSG_FILAMENTCHANGE "Zmien filament"
|
||
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
||
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
||
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
|
||
#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
|
||
#define MSG_CONTRAST "Kontrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Kolejkowanie \""
|
||
#define MSG_POWERUP "Zasilanie wlaczone"
|
||
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
|
||
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
|
||
#define MSG_WATCHDOG_RESET " Reset (watchdog)"
|
||
#define MSG_SOFTWARE_RESET " Reset (programowy)"
|
||
#define MSG_AUTHOR " | Autor: "
|
||
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
|
||
#define MSG_FREE_MEMORY " Wolna pamiec: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
|
||
#define MSG_OK "OK"
|
||
#define MSG_FILE_SAVED "Plik zapisany."
|
||
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
|
||
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
|
||
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
|
||
#define MSG_BEGIN_FILE_LIST "Start listy plikow"
|
||
#define MSG_END_FILE_LIST "Koniec listy plikow"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Niepoprawny ekstruder "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Niepoprawny ekstruder "
|
||
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
|
||
#define MSG_HEATING "Nagrzewanie ekstrudera..."
|
||
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
|
||
#define MSG_BED_HEATING "Nagrzewanie loza..."
|
||
#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Licznik X: "
|
||
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
|
||
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
|
||
#define MSG_RESEND "Wyslij ponownie: "
|
||
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
|
||
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
|
||
#define MSG_ENDSTOP_HIT "Wyzwolony"
|
||
#define MSG_ENDSTOP_OPEN "Otwarty"
|
||
#define MSG_HOTEND_OFFSET "Offsety dysz:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
|
||
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
|
||
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
|
||
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
|
||
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
|
||
#define MSG_SD_FILE_OPENED "Otwarto plik:"
|
||
#define MSG_SD_SIZE " Rozmiar:"
|
||
#define MSG_SD_FILE_SELECTED "Wybrano plik"
|
||
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
|
||
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
|
||
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "
|
||
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
|
||
#define MSG_BABYSTEPPING_X "Babystepping w osi X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping w osi Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping w osi Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 3
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " prete."
|
||
#define MSG_SD_INSERTED "Carte inseree"
|
||
#define MSG_SD_REMOVED "Carte retiree"
|
||
#define MSG_MAIN "Menu principal"
|
||
#define MSG_AUTOSTART "Demarrage auto"
|
||
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
|
||
#define MSG_AUTO_HOME "Home auto."
|
||
#define MSG_SET_ORIGIN "Regler origine"
|
||
#define MSG_PREHEAT_PLA " Prechauffage PLA"
|
||
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
|
||
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
||
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
|
||
#define MSG_COOLDOWN "Refroidir"
|
||
#define MSG_SWITCH_PS_ON "Allumer alim."
|
||
#define MSG_SWITCH_PS_OFF "Eteindre alim."
|
||
#define MSG_EXTRUDE "Extrusion"
|
||
#define MSG_RETRACT "Retraction"
|
||
#define MSG_PREHEAT_PLA "Prechauffage PLA"
|
||
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
||
#define MSG_MOVE_AXIS "Deplacer un axe"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED " Vitesse"
|
||
#define MSG_NOZZLE "Buse"
|
||
#define MSG_NOZZLE1 "Buse2"
|
||
#define MSG_NOZZLE2 "Buse3"
|
||
#define MSG_BED "Plateau"
|
||
#define MSG_FAN_SPEED "Vite. ventilateur"
|
||
#define MSG_FLOW "Flux"
|
||
#define MSG_FLOW0 "Flux 0"
|
||
#define MSG_FLOW1 "Flux 1"
|
||
#define MSG_FLOW2 "Flux 2"
|
||
#define MSG_CONTROL "Controler"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Facteur"
|
||
#define MSG_AUTOTEMP "Temp. Auto."
|
||
#define MSG_ON "Marche "
|
||
#define MSG_OFF "Arret"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Accel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax"
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "Vdepl min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract"
|
||
#define MSG_XSTEPS "Xpas/mm"
|
||
#define MSG_YSTEPS "Ypas/mm"
|
||
#define MSG_ZSTEPS "Zpas/mm"
|
||
#define MSG_ESTEPS "Epas/mm"
|
||
#define MSG_TEMPERATURE "Temperature"
|
||
#define MSG_MOTION "Mouvement"
|
||
#define MSG_CONTRAST "Contraste LCD"
|
||
#define MSG_STORE_EPROM "Sauver config"
|
||
#define MSG_LOAD_EPROM "Lire config"
|
||
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
|
||
#define MSG_REFRESH "Actualiser"
|
||
#define MSG_WATCH "Surveiller"
|
||
#define MSG_PREPARE "Preparer"
|
||
#define MSG_TUNE "Regler"
|
||
#define MSG_PAUSE_PRINT "Interrompre impr."
|
||
#define MSG_RESUME_PRINT "Reprendre impr."
|
||
#define MSG_STOP_PRINT "Arreter impr."
|
||
#define MSG_CARD_MENU "Impr. depuis SD"
|
||
#define MSG_NO_CARD "Pas de carte"
|
||
#define MSG_DWELL "Repos..."
|
||
#define MSG_USERWAIT "Atten. de l'util."
|
||
#define MSG_RESUMING "Repri. de l'impr."
|
||
#define MSG_NO_MOVE "Aucun mouvement."
|
||
#define MSG_KILLED "MORT."
|
||
#define MSG_STOPPED "STOPPE."
|
||
#define MSG_STEPPER_RELEASED "RELACHE."
|
||
#define MSG_CONTROL_RETRACT "Retraction mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
|
||
#define MSG_CONTROL_RETRACTF "Retraction V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||
#define MSG_AUTORETRACT "Retract. Auto."
|
||
#define MSG_FILAMENTCHANGE "Changer filament"
|
||
#define MSG_INIT_SDCARD "Init. la carte SD"
|
||
#define MSG_CNG_SDCARD "Changer de carte"
|
||
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
|
||
#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Butee abandon"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Mise en tampon \""
|
||
#define MSG_POWERUP "Allumage"
|
||
#define MSG_EXTERNAL_RESET " RAZ Externe"
|
||
#define MSG_BROWNOUT_RESET " RAZ defaut alim."
|
||
#define MSG_WATCHDOG_RESET " RAZ Watchdog"
|
||
#define MSG_SOFTWARE_RESET " RAZ logicielle"
|
||
#define MSG_AUTHOR " | Auteur: "
|
||
#define MSG_CONFIGURATION_VER " Derniere MaJ: "
|
||
#define MSG_FREE_MEMORY " Memoire libre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Fichier enregistre."
|
||
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
|
||
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
|
||
#define MSG_FILE_PRINTED "Impression terminee"
|
||
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
|
||
#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Extruder invalide"
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Extruder invalide"
|
||
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
|
||
#define MSG_HEATING "En chauffe..."
|
||
#define MSG_HEATING_COMPLETE "Chauffe terminee."
|
||
#define MSG_BED_HEATING "Chauffe du lit."
|
||
#define MSG_BED_DONE "Chauffe du lit terminee."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Compteur X: "
|
||
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
|
||
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
|
||
#define MSG_RESEND "Renvoie: "
|
||
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
|
||
#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Affichage du status des fin de course"
|
||
#define MSG_ENDSTOP_HIT "DECLENCHE"
|
||
#define MSG_ENDSTOP_OPEN "OUVERT"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
|
||
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
|
||
#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
|
||
#define MSG_SD_CARD_OK "Carte SD Ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
|
||
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
|
||
#define MSG_SD_SIZE " Taille: "
|
||
#define MSG_SD_FILE_SELECTED "Fichier selectionne"
|
||
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
|
||
#define MSG_SD_PRINTING_BYTE "Octet impression SD "
|
||
#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "
|
||
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 4
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
||
|
||
#define MSG_SD_INSERTED "SDKarte erkannt"
|
||
#define MSG_SD_REMOVED "SDKarte entfernt"
|
||
#define MSG_MAIN "Hauptmenü"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Stepper abschalt."
|
||
#define MSG_AUTO_HOME "Auto Nullpunkt"
|
||
#define MSG_SET_ORIGIN "Setze Nullpunkt"
|
||
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
||
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Vorw. PLA Alle"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
||
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
||
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Vorw. ABS Alle"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
||
#define MSG_COOLDOWN "Abkühlen"
|
||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||
#define MSG_EXTRUDE "Extrude"
|
||
#define MSG_RETRACT "Retract"
|
||
#define MSG_MOVE_AXIS "Achsen bewegen"
|
||
#define MSG_MOVE_X "X bewegen"
|
||
#define MSG_MOVE_Y "Y bewegen"
|
||
#define MSG_MOVE_Z "Z bewegen"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "0.1mm bewegen"
|
||
#define MSG_MOVE_1MM "1mm bewegen"
|
||
#define MSG_MOVE_10MM "10mm bewegen"
|
||
#define MSG_SPEED "Geschw"
|
||
#define MSG_NOZZLE "Düse"
|
||
#define MSG_NOZZLE1 "Düse2"
|
||
#define MSG_NOZZLE2 "Düse3"
|
||
#define MSG_BED "Bett"
|
||
#define MSG_FAN_SPEED "Lüftergeschw."
|
||
#define MSG_FLOW "Fluss"
|
||
#define MSG_FLOW0 "Fluss 0"
|
||
#define MSG_FLOW1 "Fluss 1"
|
||
#define MSG_FLOW2 "Fluss 2"
|
||
#define MSG_CONTROL "Einstellungen"
|
||
#define MSG_MIN "\002 Min"
|
||
#define MSG_MAX "\002 Max"
|
||
#define MSG_FACTOR "\002 Faktor"
|
||
#define MSG_AUTOTEMP "AutoTemp"
|
||
#define MSG_ON "Ein"
|
||
#define MSG_OFF "Aus"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Acc"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-Retract"
|
||
#define MSG_XSTEPS "Xsteps/mm"
|
||
#define MSG_YSTEPS "Ysteps/mm"
|
||
#define MSG_ZSTEPS "Zsteps/mm"
|
||
#define MSG_ESTEPS "Esteps/mm"
|
||
#define MSG_RECTRACT_WIDE "Rectract"
|
||
#define MSG_WATCH "Beobachten"
|
||
#define MSG_TEMPERATURE "Temperatur"
|
||
#define MSG_MOTION "Bewegung"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "EPROM speichern"
|
||
#define MSG_LOAD_EPROM "EPROM laden"
|
||
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
||
#define MSG_REFRESH "Aktualisieren"
|
||
#define MSG_PREPARE "Vorbereitung"
|
||
#define MSG_CONTROL "Einstellungen"
|
||
#define MSG_TUNE "Justierung"
|
||
#define MSG_PAUSE_PRINT "Druck anhalten"
|
||
#define MSG_RESUME_PRINT "Druck fortsetz"
|
||
#define MSG_STOP_PRINT "Druck stoppen"
|
||
#define MSG_CARD_MENU "SDKarten Menü"
|
||
#define MSG_NO_CARD "Keine SDKarte"
|
||
#define MSG_DWELL "Warten..."
|
||
#define MSG_USERWAIT "Warte auf Nutzer"
|
||
#define MSG_RESUMING "Druck fortsetzung"
|
||
#define MSG_NO_MOVE "Kein Zug."
|
||
#define MSG_KILLED "KILLED"
|
||
#define MSG_STOPPED "GESTOPPT"
|
||
#define MSG_STEPPER_RELEASED "Stepper frei"
|
||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
||
#define MSG_INIT_SDCARD "Init. SD-Card"
|
||
#define MSG_CNG_SDCARD "Change SD-Card"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " External Reset"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||
#define MSG_FREE_MEMORY " Free Memory: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Done saving file."
|
||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
||
#define MSG_FILE_PRINTED "Done printing file"
|
||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||
#define MSG_END_FILE_LIST "End file list"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||
#define MSG_HEATING "Heating..."
|
||
#define MSG_HEATING_COMPLETE "Heating done."
|
||
#define MSG_BED_HEATING "Bed Heating."
|
||
#define MSG_BED_DONE "Bed done."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Count X:"
|
||
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
|
||
#define MSG_RESEND "Resend:"
|
||
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Reporting endstop status"
|
||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||
#define MSG_ENDSTOP_OPEN "open"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||
#define MSG_SD_FILE_OPENED "File opened:"
|
||
#define MSG_SD_SIZE " Size:"
|
||
#define MSG_SD_FILE_SELECTED "File selected"
|
||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate too high : "
|
||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 5
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " lista."
|
||
#define MSG_SD_INSERTED "Tarjeta colocada"
|
||
#define MSG_SD_REMOVED "Tarjeta retirada"
|
||
#define MSG_MAIN "Menu principal"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Apagar motores"
|
||
#define MSG_AUTO_HOME "Llevar al origen"
|
||
#define MSG_SET_ORIGIN "Establecer cero"
|
||
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
||
#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
|
||
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
||
#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
|
||
#define MSG_COOLDOWN "Enfriar"
|
||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||
#define MSG_EXTRUDE "Extruir"
|
||
#define MSG_RETRACT "Retraer"
|
||
#define MSG_MOVE_AXIS "Mover ejes"
|
||
#define MSG_MOVE_X "Mover X"
|
||
#define MSG_MOVE_Y "Mover Y"
|
||
#define MSG_MOVE_Z "Mover Z"
|
||
#define MSG_MOVE_E "Extrusor"
|
||
#define MSG_MOVE_E1 "Extrusor2"
|
||
#define MSG_MOVE_E2 "Extrusor3"
|
||
#define MSG_MOVE_01MM "Mover 0.1mm"
|
||
#define MSG_MOVE_1MM "Mover 1mm"
|
||
#define MSG_MOVE_10MM "Mover 10mm"
|
||
#define MSG_SPEED "Velocidad"
|
||
#define MSG_NOZZLE "Nozzle"
|
||
#define MSG_NOZZLE1 "Nozzle2"
|
||
#define MSG_NOZZLE2 "Nozzle3"
|
||
#define MSG_BED "Base"
|
||
#define MSG_FAN_SPEED "Ventilador"
|
||
#define MSG_FLOW "Flujo"
|
||
#define MSG_FLOW0 "Flujo 0"
|
||
#define MSG_FLOW1 "Flujo 1"
|
||
#define MSG_FLOW2 "Flujo 2"
|
||
#define MSG_CONTROL "Control"
|
||
#define MSG_MIN "\002 Min"
|
||
#define MSG_MAX "\002 Max"
|
||
#define MSG_FACTOR "\002 Fact"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On"
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Acel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax"
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax"
|
||
#define MSG_A_RETRACT "A-retrac."
|
||
#define MSG_XSTEPS "X pasos/mm"
|
||
#define MSG_YSTEPS "Y pasos/mm"
|
||
#define MSG_ZSTEPS "Z pasos/mm"
|
||
#define MSG_ESTEPS "E pasos/mm"
|
||
#define MSG_RECTRACT "Retraer"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Movimiento"
|
||
#define MSG_STORE_EPROM "Guardar memoria"
|
||
#define MSG_LOAD_EPROM "Cargar memoria"
|
||
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
||
#define MSG_REFRESH "Volver a cargar"
|
||
#define MSG_WATCH "Monitorizar"
|
||
#define MSG_PREPARE "Preparar"
|
||
#define MSG_TUNE "Ajustar"
|
||
#define MSG_PAUSE_PRINT "Pausar impresion"
|
||
#define MSG_RESUME_PRINT "Reanudar impres."
|
||
#define MSG_STOP_PRINT "Detener impresion"
|
||
#define MSG_CARD_MENU "Menu de SD"
|
||
#define MSG_NO_CARD "No hay tarjeta SD"
|
||
#define MSG_DWELL "Reposo..."
|
||
#define MSG_USERWAIT "Esperando ordenes"
|
||
#define MSG_RESUMING "Resumiendo impre."
|
||
#define MSG_NO_MOVE "Sin movimiento"
|
||
#define MSG_KILLED "PARADA DE EMERG."
|
||
#define MSG_STOPPED "PARADA"
|
||
#define MSG_CONTROL_RETRACT "Retraer mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
|
||
#define MSG_CONTROL_RETRACTF "Retraer V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Cambiar filamento"
|
||
#define MSG_INIT_SDCARD "Iniciando tarjeta"
|
||
#define MSG_CNG_SDCARD "Cambiar tarjeta"
|
||
#define MSG_RECTRACT_WIDE "Retraer"
|
||
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
||
#define MSG_TEMPERATURE_RTN "Temperatura"
|
||
#define MSG_MAIN_WIDE "Menu principal"
|
||
#define MSG_MOTION_WIDE "Movimiento"
|
||
#define MSG_PREPARE_ALT "Preparar"
|
||
#define MSG_CONTROL_ARROW "Control"
|
||
#define MSG_RETRACT_ARROW "Retraer"
|
||
#define MSG_STEPPER_RELEASED "Desacoplada."
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "En cola \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Externo"
|
||
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
||
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
||
#define MSG_SOFTWARE_RESET " Reset por Software"
|
||
#define MSG_AUTHOR " | Autor: "
|
||
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
|
||
#define MSG_FREE_MEMORY " Memoria libre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Guardado."
|
||
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
|
||
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
|
||
#define MSG_FILE_PRINTED "Impresion terminada"
|
||
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
|
||
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido "
|
||
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
||
#define MSG_HEATING "Calentando..."
|
||
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
|
||
#define MSG_BED_HEATING "Calentando la base."
|
||
#define MSG_BED_DONE "Base Caliente."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Cuenta X:"
|
||
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
|
||
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela despues de continuar)"
|
||
#define MSG_RESEND "Reenviar:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Comprobando fines de carrera."
|
||
#define MSG_ENDSTOP_HIT "PULSADO"
|
||
#define MSG_ENDSTOP_OPEN "abierto"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
|
||
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
|
||
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
|
||
#define MSG_SD_CARD_OK "Tarjeta SD OK"
|
||
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
|
||
#define MSG_SD_FILE_OPENED "Archivo abierto:"
|
||
#define MSG_SD_SIZE " Tamaño:"
|
||
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
|
||
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
|
||
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "
|
||
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
#if LANGUAGE_CHOICE == 6
|
||
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME "Готов."
|
||
#define MSG_SD_INSERTED "Карта вставлена"
|
||
#define MSG_SD_REMOVED "Карта извлечена"
|
||
#define MSG_MAIN "Меню \003"
|
||
#define MSG_AUTOSTART "Автостарт"
|
||
#define MSG_DISABLE_STEPPERS "Выкл. двигатели"
|
||
#define MSG_AUTO_HOME "Парковка"
|
||
#define MSG_SET_ORIGIN "Запомнить ноль"
|
||
#define MSG_PREHEAT_PLA "Преднагрев PLA"
|
||
#define MSG_PREHEAT_PLA0 "Преднагрев PLA0"
|
||
#define MSG_PREHEAT_PLA1 "Преднагрев PLA1"
|
||
#define MSG_PREHEAT_PLA2 "Преднагрев PLA2"
|
||
#define MSG_PREHEAT_PLA012 "Преднаг. PLA все"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
|
||
#define MSG_PREHEAT_ABS "Преднагрев ABS"
|
||
#define MSG_PREHEAT_ABS0 "Преднагрев ABS0"
|
||
#define MSG_PREHEAT_ABS1 "Преднагрев ABS1"
|
||
#define MSG_PREHEAT_ABS2 "Преднагрев ABS2"
|
||
#define MSG_PREHEAT_ABS012 "Преднаг. ABS все "
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
|
||
#define MSG_COOLDOWN "Охлаждение"
|
||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||
#define MSG_EXTRUDE "Экструзия"
|
||
#define MSG_RETRACT "Откат"
|
||
#define MSG_MOVE_AXIS "Движение по осям"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Скорость:"
|
||
#define MSG_NOZZLE "\002 Фильера:"
|
||
#define MSG_NOZZLE1 "\002 Фильера2:"
|
||
#define MSG_NOZZLE2 "\002 Фильера3:"
|
||
#define MSG_BED "\002 Кровать:"
|
||
#define MSG_FAN_SPEED "Куллер:"
|
||
#define MSG_FLOW "Поток:"
|
||
#define MSG_FLOW0 " Поток0:"
|
||
#define MSG_FLOW1 " Поток1:"
|
||
#define MSG_FLOW2 " Поток2:"
|
||
#define MSG_CONTROL "Настройки \003"
|
||
#define MSG_MIN "\002 Минимум:"
|
||
#define MSG_MAX "\002 Максимум:"
|
||
#define MSG_FACTOR "\002 Фактор:"
|
||
#define MSG_AUTOTEMP "Autotemp:"
|
||
#define MSG_ON "Вкл. "
|
||
#define MSG_OFF "Выкл. "
|
||
#define MSG_PID_P "PID-P: "
|
||
#define MSG_PID_I "PID-I: "
|
||
#define MSG_PID_D "PID-D: "
|
||
#define MSG_PID_C "PID-C: "
|
||
#define MSG_ACC "Acc:"
|
||
#define MSG_VXY_JERK "Vxy-jerk: "
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN "Vmin:"
|
||
#define MSG_VTRAV_MIN "VTrav min:"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract:"
|
||
#define MSG_XSTEPS "X шаг/mm:"
|
||
#define MSG_YSTEPS "Y шаг/mm:"
|
||
#define MSG_ZSTEPS "Z шаг/mm:"
|
||
#define MSG_ESTEPS "E шаг/mm:"
|
||
#define MSG_RECTRACT "Откат подачи \x7E"
|
||
#define MSG_TEMPERATURE "Температура \x7E"
|
||
#define MSG_MOTION "Скорости \x7E"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "Сохранить в EPROM"
|
||
#define MSG_LOAD_EPROM "Загруз. из EPROM"
|
||
#define MSG_RESTORE_FAILSAFE "Сброс настроек"
|
||
#define MSG_REFRESH "\004Обновить"
|
||
#define MSG_WATCH "Обзор \003"
|
||
#define MSG_PREPARE "Действия \x7E"
|
||
#define MSG_TUNE "Настройки \x7E"
|
||
#define MSG_PAUSE_PRINT "Продолжить печать"
|
||
#define MSG_RESUME_PRINT "возобн. печать"
|
||
#define MSG_STOP_PRINT "Остановить печать"
|
||
#define MSG_CARD_MENU "Меню карты \x7E"
|
||
#define MSG_NO_CARD "Нет карты"
|
||
#define MSG_DWELL "Сон..."
|
||
#define MSG_USERWAIT "Ожиданиие"
|
||
#define MSG_RESUMING "Resuming print"
|
||
#define MSG_NO_MOVE "Нет движения."
|
||
#define MSG_KILLED "УБИТО."
|
||
#define MSG_STOPPED "ОСТАНОВЛЕНО."
|
||
#define MSG_CONTROL_RETRACT "Откат mm:"
|
||
#define MSG_CONTROL_RETRACT_SWAP "своп Откат mm:"
|
||
#define MSG_CONTROL_RETRACTF "Откат V:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "своп Возврат +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V:"
|
||
#define MSG_AUTORETRACT "АвтоОткат:"
|
||
#define MSG_FILAMENTCHANGE "Change filament"
|
||
#define MSG_INIT_SDCARD "Init. SD-Card"
|
||
#define MSG_CNG_SDCARD "Change SD-Card"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Запланировано \""
|
||
#define MSG_POWERUP "Включение питания"
|
||
#define MSG_EXTERNAL_RESET " Внешний сброс"
|
||
#define MSG_BROWNOUT_RESET " Brown out сброс"
|
||
#define MSG_WATCHDOG_RESET " Watchdog сброс"
|
||
#define MSG_SOFTWARE_RESET " программный сброс"
|
||
#define MSG_AUTHOR " | Автор: "
|
||
#define MSG_CONFIGURATION_VER " Последнее обновление: "
|
||
#define MSG_FREE_MEMORY " Памяти свободно: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Файл записан."
|
||
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
|
||
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
|
||
#define MSG_FILE_PRINTED "Печать файла завершена"
|
||
#define MSG_BEGIN_FILE_LIST "Список файлов"
|
||
#define MSG_END_FILE_LIST "Конец списка файлов"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 ошибка экструдера "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 ошибка экструдера "
|
||
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
|
||
#define MSG_HEATING "Нагрев... "
|
||
#define MSG_HEATING_COMPLETE "Наргето. "
|
||
#define MSG_BED_HEATING "Нагрев стола... "
|
||
#define MSG_BED_DONE "Стол нагрет. "
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Count X:"
|
||
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
|
||
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
|
||
#define MSG_RESEND "Переотправка:"
|
||
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
|
||
#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
|
||
#define MSG_X_MIN "x_min:"
|
||
#define MSG_X_MAX "x_max:"
|
||
#define MSG_Y_MIN "y_min:"
|
||
#define MSG_Y_MAX "y_max:"
|
||
#define MSG_Z_MIN "z_min:"
|
||
#define MSG_Z_MAX "z_max:"
|
||
#define MSG_M119_REPORT "Статус концевиков"
|
||
#define MSG_ENDSTOP_HIT "Срабатывание концевика"
|
||
#define MSG_ENDSTOP_OPEN "Концевик освобожден"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
|
||
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
|
||
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
|
||
#define MSG_SD_CARD_OK "SD карта в порядке"
|
||
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
|
||
#define MSG_SD_FILE_OPENED "Файл открыт:"
|
||
#define MSG_SD_SIZE " Размер:"
|
||
#define MSG_SD_FILE_SELECTED "Файл выбран"
|
||
#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
|
||
#define MSG_SD_PRINTING_BYTE "SD печать byte "
|
||
#define MSG_SD_NOT_PRINTING "нет SD печати"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
|
||
#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : "
|
||
#define MSG_ENDSTOPS_HIT "концевик сработал: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 7
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " pronto."
|
||
#define MSG_SD_INSERTED "SD Card inserita"
|
||
#define MSG_SD_REMOVED "SD Card rimossa"
|
||
#define MSG_MAIN "Menu principale"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
|
||
#define MSG_AUTO_HOME "Auto Home"
|
||
#define MSG_SET_ORIGIN "Imposta Origine"
|
||
#define MSG_PREHEAT_PLA "Preriscalda PLA"
|
||
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Preris. PLA Tutto"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Preri. PLA Piatto"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
|
||
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
||
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Preris. ABS Tutto"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Preri. ABS Piatto"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
|
||
#define MSG_COOLDOWN "Raffredda"
|
||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||
#define MSG_EXTRUDE "Estrudi"
|
||
#define MSG_RETRACT "Ritrai"
|
||
#define MSG_MOVE_AXIS "Muovi Asse"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Velcità"
|
||
#define MSG_NOZZLE "Ugello"
|
||
#define MSG_NOZZLE1 "Ugello2"
|
||
#define MSG_NOZZLE2 "Ugello3"
|
||
#define MSG_BED "Piatto"
|
||
#define MSG_FAN_SPEED "Ventola"
|
||
#define MSG_FLOW "Flusso"
|
||
#define MSG_FLOW0 "Flusso 0"
|
||
#define MSG_FLOW1 "Flusso 1"
|
||
#define MSG_FLOW2 "Flusso 2"
|
||
#define MSG_CONTROL "Controllo"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Fact:"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Accel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax"
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax"
|
||
#define MSG_A_RETRACT "A-retract"
|
||
#define MSG_XSTEPS "Xpassi/mm"
|
||
#define MSG_YSTEPS "Ypassi/mm"
|
||
#define MSG_ZSTEPS "Zpassi/mm"
|
||
#define MSG_ESTEPS "Epassi/mm"
|
||
#define MSG_RECTRACT "Ritrai"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Movimento"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "Salva in EEPROM"
|
||
#define MSG_LOAD_EPROM "Carica da EEPROM"
|
||
#define MSG_RESTORE_FAILSAFE "Impostaz. default"
|
||
#define MSG_REFRESH "Aggiorna"
|
||
#define MSG_WATCH "Guarda"
|
||
#define MSG_PREPARE "Prepara"
|
||
#define MSG_TUNE "Adatta"
|
||
#define MSG_PAUSE_PRINT "Pausa"
|
||
#define MSG_RESUME_PRINT "Riprendi Stampa"
|
||
#define MSG_STOP_PRINT "Arresta Stampa"
|
||
#define MSG_CARD_MENU "SD Card Menu"
|
||
#define MSG_NO_CARD "No SD Card"
|
||
#define MSG_DWELL "Sospensione..."
|
||
#define MSG_USERWAIT "Attendi Utente..."
|
||
#define MSG_RESUMING "Riprendi Stampa"
|
||
#define MSG_NO_MOVE "Nessun Movimento."
|
||
#define MSG_KILLED "UCCISO. "
|
||
#define MSG_STOPPED "ARRESTATO. "
|
||
#define MSG_CONTROL_RETRACT "Ritrai mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
|
||
#define MSG_CONTROL_RETRACTF "Ritrai V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||
#define MSG_AUTORETRACT "AutoArretramento"
|
||
#define MSG_FILAMENTCHANGE "Cambia filamento"
|
||
#define MSG_INIT_SDCARD "Iniz. SD-Card"
|
||
#define MSG_CNG_SDCARD "Cambia SD-Card"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "accodamento \""
|
||
#define MSG_POWERUP "Accensione"
|
||
#define MSG_EXTERNAL_RESET " Reset Esterno"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_AUTHOR " | Autore: "
|
||
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
|
||
#define MSG_FREE_MEMORY " Memoria Libera: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "File Salvato."
|
||
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
|
||
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
|
||
#define MSG_FILE_PRINTED "File stampato"
|
||
#define MSG_BEGIN_FILE_LIST "Inizio Lista File"
|
||
#define MSG_END_FILE_LIST "Fine Lista File"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Estrusore non valido "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Estrusore non valido "
|
||
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
|
||
#define MSG_HEATING "Riscaldamento..."
|
||
#define MSG_HEATING_COMPLETE "Stampante Calda."
|
||
#define MSG_BED_HEATING "Riscaldamento Piatto."
|
||
#define MSG_BED_DONE "Piatto Pronto."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Calcola X: "
|
||
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
|
||
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
|
||
#define MSG_RESEND "Reinviato:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
|
||
#define MSG_INVALID_EXTRUDER "Estrusore non valido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Segnalazione stato degli endstop"
|
||
#define MSG_ENDSTOP_HIT "INNESCATO"
|
||
#define MSG_ENDSTOP_OPEN "aperto"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
|
||
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
|
||
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
|
||
#define MSG_SD_FILE_OPENED "File aperto: "
|
||
#define MSG_SD_SIZE " Dimensione: "
|
||
#define MSG_SD_FILE_SELECTED "File selezionato"
|
||
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
|
||
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
|
||
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: "
|
||
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 8
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " pronto."
|
||
#define MSG_SD_INSERTED "Cartao inserido"
|
||
#define MSG_SD_REMOVED "Cartao removido"
|
||
#define MSG_MAIN " Menu principal \003"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Apagar motores"
|
||
#define MSG_AUTO_HOME "Ir para origen"
|
||
#define MSG_SET_ORIGIN "Estabelecer orig."
|
||
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
|
||
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
|
||
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
|
||
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
|
||
#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
|
||
#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
|
||
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
|
||
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
|
||
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
|
||
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
|
||
#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
|
||
#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
|
||
#define MSG_COOLDOWN "Esfriar"
|
||
#define MSG_SWITCH_PS_ON "Switch Power On"
|
||
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
||
#define MSG_EXTRUDE "Extrudar"
|
||
#define MSG_RETRACT "Retrair"
|
||
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
|
||
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
|
||
#define MSG_MOVE_AXIS "Mover eixo \x7E"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Velocidade:"
|
||
#define MSG_NOZZLE "\002Nozzle:"
|
||
#define MSG_NOZZLE1 "\002Nozzle2:"
|
||
#define MSG_NOZZLE2 "\002Nozzle3:"
|
||
#define MSG_BED "\002Base:"
|
||
#define MSG_FAN_SPEED "Velocidade vento."
|
||
#define MSG_FLOW "Fluxo:"
|
||
#define MSG_FLOW0 "Fluxo0:"
|
||
#define MSG_FLOW1 "Fluxo1:"
|
||
#define MSG_FLOW2 "Fluxo2:"
|
||
#define MSG_CONTROL "Controle \003"
|
||
#define MSG_MIN "\002 Min:"
|
||
#define MSG_MAX "\002 Max:"
|
||
#define MSG_FACTOR "\002 Fact:"
|
||
#define MSG_AUTOTEMP "Autotemp:"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P: "
|
||
#define MSG_PID_I "PID-I: "
|
||
#define MSG_PID_D "PID-D: "
|
||
#define MSG_PID_C "PID-C: "
|
||
#define MSG_ACC "Acc:"
|
||
#define MSG_VXY_JERK "Vxy-jerk: "
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN "Vmin:"
|
||
#define MSG_VTRAV_MIN "VTrav min:"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract:"
|
||
#define MSG_XSTEPS "Xpasso/mm:"
|
||
#define MSG_YSTEPS "Ypasso/mm:"
|
||
#define MSG_ZSTEPS "Zpasso/mm:"
|
||
#define MSG_ESTEPS "Epasso/mm:"
|
||
#define MSG_MAIN_WIDE "Menu Principal \003"
|
||
#define MSG_RECTRACT "Retrair"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Movimento"
|
||
#define MSG_STORE_EPROM "Guardar memoria"
|
||
#define MSG_LOAD_EPROM "Carregar memoria"
|
||
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
||
#define MSG_REFRESH "\004Recarregar"
|
||
#define MSG_WATCH "Monitorar \003"
|
||
#define MSG_PREPARE "Preparar \x7E"
|
||
#define MSG_PREPARE_ALT "Preparar \003"
|
||
#define MSG_CONTROL_ARROW "Controle \x7E"
|
||
#define MSG_RETRACT_ARROW "Retrair \x7E"
|
||
#define MSG_TUNE "Tune \x7E"
|
||
#define MSG_PAUSE_PRINT "Pausar impressao"
|
||
#define MSG_RESUME_PRINT "Resumir impressao"
|
||
#define MSG_STOP_PRINT "Parar impressao"
|
||
#define MSG_CARD_MENU "Menu cartao SD"
|
||
#define MSG_NO_CARD "Sem cartao SD"
|
||
#define MSG_DWELL "Repouso..."
|
||
#define MSG_USERWAIT "Esperando ordem"
|
||
#define MSG_RESUMING "Resuming print"
|
||
#define MSG_NO_MOVE "Sem movimento"
|
||
#define MSG_KILLED "PARADA DE EMERG."
|
||
#define MSG_STOPPED "PARADA. "
|
||
#define MSG_STEPPER_RELEASED "Lancado."
|
||
#define MSG_CONTROL_RETRACT " Retrair mm:"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retrair V:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V:"
|
||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||
#define MSG_FILAMENTCHANGE "Change filament"
|
||
#define MSG_INIT_SDCARD "Init. SD-Card"
|
||
#define MSG_CNG_SDCARD "Change SD-Card"
|
||
#define MSG_ZPROBE_OUT "Son. fora da mesa"
|
||
#define MSG_POSITION_UNKNOWN "XY antes de Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Externo"
|
||
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
|
||
#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
|
||
#define MSG_SOFTWARE_RESET " Reset por Software"
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
|
||
#define MSG_FREE_MEMORY " memoria Livre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Guardado."
|
||
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
|
||
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
|
||
#define MSG_FILE_PRINTED "Impressao terminada"
|
||
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
|
||
#define MSG_END_FILE_LIST "Fim da lista de arquivos"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor inválido "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor inválido "
|
||
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
|
||
#define MSG_HEATING "Aquecendo..."
|
||
#define MSG_HEATING_COMPLETE "Aquecido."
|
||
#define MSG_BED_HEATING "Aquecendo a Base."
|
||
#define MSG_BED_DONE "Base quente."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Conta X:"
|
||
#define MSG_ERR_KILLED "Impressora parada com kill() !!"
|
||
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
|
||
#define MSG_RESEND "Reenviar:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor invalido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Relatando estado do ponto final"
|
||
#define MSG_ENDSTOP_HIT "PULSADO"
|
||
#define MSG_ENDSTOP_OPEN "Aberto"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
|
||
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
|
||
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
|
||
#define MSG_SD_CARD_OK "cartao SD ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
|
||
#define MSG_SD_FILE_OPENED "Arquivo aberto:"
|
||
#define MSG_SD_SIZE " Size:"
|
||
#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
|
||
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
|
||
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate muito alto : "
|
||
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
|
||
|
||
#endif
|
||
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 9
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " valmis."
|
||
#define MSG_SD_INSERTED "Kortti asetettu"
|
||
#define MSG_SD_REMOVED "Kortti poistettu"
|
||
#define MSG_MAIN "Palaa"
|
||
#define MSG_AUTOSTART "Automaatti"
|
||
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
|
||
#define MSG_AUTO_HOME "Aja referenssiin"
|
||
#define MSG_SET_ORIGIN "Aseta origo"
|
||
#define MSG_PREHEAT_PLA "Esilammita PLA"
|
||
#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
|
||
#define MSG_PREHEAT_ABS "Esilammita ABS"
|
||
#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
|
||
#define MSG_COOLDOWN "Jaahdyta"
|
||
#define MSG_SWITCH_PS_ON "Virta paalle"
|
||
#define MSG_SWITCH_PS_OFF "Virta pois"
|
||
#define MSG_EXTRUDE "Pursota"
|
||
#define MSG_RETRACT "Veda takaisin"
|
||
#define MSG_MOVE_AXIS "Liikuta akseleita"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Nopeus"
|
||
#define MSG_NOZZLE "Suutin"
|
||
#define MSG_NOZZLE1 "Suutin2"
|
||
#define MSG_NOZZLE2 "Suutin3"
|
||
#define MSG_BED "Alusta"
|
||
#define MSG_FAN_SPEED "Tuul. nopeus"
|
||
#define MSG_FLOW "Virtaus"
|
||
#define MSG_FLOW0 "Virtaus 0"
|
||
#define MSG_FLOW1 "Virtaus 1"
|
||
#define MSG_FLOW2 "Virtaus 2"
|
||
#define MSG_CONTROL "Kontrolli"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Kerr"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Kiihtyv"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VLiike min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-peruuta"
|
||
#define MSG_XSTEPS "Xsteps/mm"
|
||
#define MSG_YSTEPS "Ysteps/mm"
|
||
#define MSG_ZSTEPS "Zsteps/mm"
|
||
#define MSG_ESTEPS "Esteps/mm"
|
||
#define MSG_RECTRACT "Veda takaisin"
|
||
#define MSG_TEMPERATURE "Lampotila"
|
||
#define MSG_MOTION "Liike"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "Tallenna muistiin"
|
||
#define MSG_LOAD_EPROM "Lataa muistista"
|
||
#define MSG_RESTORE_FAILSAFE "Palauta oletus"
|
||
#define MSG_REFRESH "Paivita"
|
||
#define MSG_WATCH "Seuraa"
|
||
#define MSG_PREPARE "Valmistele"
|
||
#define MSG_TUNE "Saada"
|
||
#define MSG_PAUSE_PRINT "Keskeyta tulostus"
|
||
#define MSG_RESUME_PRINT "Jatka tulostusta"
|
||
#define MSG_STOP_PRINT "Pysayta tulostus"
|
||
#define MSG_CARD_MENU "Korttivalikko"
|
||
#define MSG_NO_CARD "Ei korttia"
|
||
#define MSG_DWELL "Nukkumassa..."
|
||
#define MSG_USERWAIT "Odotet. valintaa"
|
||
#define MSG_RESUMING "Jatke. tulostusta"
|
||
#define MSG_NO_MOVE "Ei liiketta."
|
||
#define MSG_KILLED "KILLED. "
|
||
#define MSG_STOPPED "STOPPED. "
|
||
#define MSG_CONTROL_RETRACT "Veda mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Va. Veda mm"
|
||
#define MSG_CONTROL_RETRACTF "Veda V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||
#define MSG_AUTORETRACT "AutoVeto."
|
||
#define MSG_FILAMENTCHANGE "Change filament"
|
||
#define MSG_INIT_SDCARD "Init. SD-Card"
|
||
#define MSG_CNG_SDCARD "Change SD-Card"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "jonoon \""
|
||
#define MSG_POWERUP "Kaynnistys"
|
||
#define MSG_EXTERNAL_RESET " Ulkoinen Reset"
|
||
#define MSG_BROWNOUT_RESET " Alajannite Reset"
|
||
#define MSG_WATCHDOG_RESET " Vahtikoira Reset"
|
||
#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
|
||
#define MSG_FREE_MEMORY " Vapaata muistia: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Tiedosto tallennettu."
|
||
#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
|
||
#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
|
||
#define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
|
||
#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
|
||
#define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Virheellinen suutin "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Virheellinen suutin "
|
||
#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
|
||
#define MSG_HEATING "Lammitan..."
|
||
#define MSG_HEATING_COMPLETE "Lammitys valmis."
|
||
#define MSG_BED_HEATING "Alusta lampiaa."
|
||
#define MSG_BED_DONE "Alusta valmis."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Laskuri X: "
|
||
#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
|
||
#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
|
||
#define MSG_RESEND "Uudelleenlahetys: "
|
||
#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
|
||
#define MSG_INVALID_EXTRUDER "Virheellinen suutin"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Rajakytkimien tilaraportti"
|
||
#define MSG_ENDSTOP_HIT "AKTIIVISENA"
|
||
#define MSG_ENDSTOP_OPEN "avoinna"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
|
||
#define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
|
||
#define MSG_SD_CARD_OK "SD kortti ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
|
||
#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
|
||
#define MSG_SD_FILE_OPENED "Tiedosto avattu: "
|
||
#define MSG_SD_SIZE " Koko: "
|
||
#define MSG_SD_FILE_SELECTED "Tiedosto valittu"
|
||
#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
|
||
#define MSG_SD_PRINTING_BYTE "SD tulostus byte "
|
||
#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: "
|
||
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Kontrasti"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Virhe valikon rakenteessa"
|
||
|
||
#endif
|
||
|
||
#if LANGUAGE_CHOICE == 10
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " parada."
|
||
#define MSG_SD_INSERTED "Tarcheta colocada"
|
||
#define MSG_SD_REMOVED "Tarcheta retirada"
|
||
#define MSG_MAIN "Menu prencipal"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Amortar motors"
|
||
#define MSG_AUTO_HOME "Levar a l'orichen"
|
||
#define MSG_SET_ORIGIN "Establir zero"
|
||
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
||
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
|
||
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
|
||
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
|
||
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
|
||
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
||
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
|
||
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
|
||
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
|
||
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
|
||
#define MSG_COOLDOWN "Enfriar"
|
||
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
|
||
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
|
||
#define MSG_EXTRUDE "Extruir"
|
||
#define MSG_RETRACT "Retraer"
|
||
#define MSG_MOVE_AXIS "Mover Eixes"
|
||
#define MSG_MOVE_X "Move X"
|
||
#define MSG_MOVE_Y "Move Y"
|
||
#define MSG_MOVE_Z "Move Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Move 0.1mm"
|
||
#define MSG_MOVE_1MM "Move 1mm"
|
||
#define MSG_MOVE_10MM "Move 10mm"
|
||
#define MSG_SPEED "Velocidat"
|
||
#define MSG_NOZZLE "Nozzle"
|
||
#define MSG_NOZZLE1 "Nozzle2"
|
||
#define MSG_NOZZLE2 "Nozzle3"
|
||
#define MSG_BED "Base"
|
||
#define MSG_FAN_SPEED "Ixoriador"
|
||
#define MSG_FLOW "Fluxo"
|
||
#define MSG_FLOW0 "Fluxo 0"
|
||
#define MSG_FLOW1 "Fluxo 1"
|
||
#define MSG_FLOW2 "Fluxo 2"
|
||
#define MSG_CONTROL "Control"
|
||
#define MSG_MIN "\002 Min"
|
||
#define MSG_MAX "\002 Max"
|
||
#define MSG_FACTOR "\002 Fact"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On"
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Acel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ves-jerk"
|
||
#define MSG_VMAX "Vmax"
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "y"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax"
|
||
#define MSG_A_RETRACT "A-retrac."
|
||
#define MSG_XSTEPS "X trangos/mm"
|
||
#define MSG_YSTEPS "Y trangos/mm"
|
||
#define MSG_ZSTEPS "Z trangos/mm"
|
||
#define MSG_ESTEPS "E trangos/mm"
|
||
#define MSG_RECTRACT "Retraer"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Movimiento"
|
||
#define MSG_STORE_EPROM "Alzar Memoria"
|
||
#define MSG_LOAD_EPROM "Cargar Memoria"
|
||
#define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."
|
||
#define MSG_REFRESH "Tornar a cargar"
|
||
#define MSG_WATCH "Monitorizar"
|
||
#define MSG_PREPARE "Preparar"
|
||
#define MSG_TUNE "Achustar"
|
||
#define MSG_PAUSE_PRINT "Pausar impresion"
|
||
#define MSG_RESUME_PRINT "Contin. impresion"
|
||
#define MSG_STOP_PRINT "Detener Impresion"
|
||
#define MSG_CARD_MENU "Menu de SD"
|
||
#define MSG_NO_CARD "No i hai tarcheta"
|
||
#define MSG_DWELL "Reposo..."
|
||
#define MSG_USERWAIT "Asperan. ordines"
|
||
#define MSG_RESUMING "Contin. impresion"
|
||
#define MSG_NO_MOVE "Sin movimiento"
|
||
#define MSG_KILLED "ATURADA D'EMERCH."
|
||
#define MSG_STOPPED "ATURADA."
|
||
#define MSG_CONTROL_RETRACT "Retraer mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm"
|
||
#define MSG_CONTROL_RETRACTF "Retraer F"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Cambear"
|
||
#define MSG_INIT_SDCARD "Encetan. tarcheta"
|
||
#define MSG_CNG_SDCARD "Cambiar tarcheta"
|
||
#define MSG_RECTRACT_WIDE "Retraer"
|
||
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
||
#define MSG_TEMPERATURE_RTN "Temperatura"
|
||
#define MSG_MAIN_WIDE "Menu Prencipal"
|
||
#define MSG_MOTION_WIDE "Movimiento"
|
||
#define MSG_PREPARE_ALT "Preparar"
|
||
#define MSG_CONTROL_ARROW "Control"
|
||
#define MSG_RETRACT_ARROW "Retraer"
|
||
#define MSG_STEPPER_RELEASED "Desacoplada."
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
#define MSG_CONTRAST "Contrast"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "En coda \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Externo"
|
||
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
||
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
||
#define MSG_SOFTWARE_RESET " Reset por Software"
|
||
#define MSG_AUTHOR " | Autor: "
|
||
#define MSG_CONFIGURATION_VER " Zaguer esvielle: "
|
||
#define MSG_FREE_MEMORY " Memoria libre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Guardau."
|
||
#define MSG_ERR_LINE_NO "O Numero de Linea no ye igual a l'Ultimo Numero de Linea+1, Ultima Linea:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "o checksum no coincide, Ultima Linea:"
|
||
#define MSG_ERR_NO_CHECKSUM "No se podió trobar o Checksum con o numero de linea, Ultima Linea:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se trobo o Numero de Linea con o Checksum, Ultima Linea:"
|
||
#define MSG_FILE_PRINTED "Impresion rematada"
|
||
#define MSG_BEGIN_FILE_LIST "Prencipio d'a lista de fichero"
|
||
#define MSG_END_FILE_LIST "Fin d'a lista de fichero"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido "
|
||
#define MSG_ERR_NO_THERMISTORS "No i hai termistores - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
||
#define MSG_HEATING "Calentando..."
|
||
#define MSG_HEATING_COMPLETE "Calentamiento Feito."
|
||
#define MSG_BED_HEATING "Calentando la base."
|
||
#define MSG_BED_DONE "Base Calient."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Cuenta X:"
|
||
#define MSG_ERR_KILLED "Impresora Aturada con kill()!!"
|
||
#define MSG_ERR_STOPPED "Impresora aturada por errors. Apanye a error y use M999 Ta reiniciar!. (a temperatura se reestablece. Ajustela antes de continar)"
|
||
#define MSG_RESEND "Reninviar:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando Desconoixiu:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Comprobando fins de corrida."
|
||
#define MSG_ENDSTOP_HIT "PULSAU"
|
||
#define MSG_ENDSTOP_OPEN "ubierto"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "No se podió ubrir a subcarpeta."
|
||
#define MSG_SD_INIT_FAIL "Fallo en encetar a SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Fallo en amontar o volumen"
|
||
#define MSG_SD_OPENROOT_FAIL "Fallo en ubrir a carpeta raiz"
|
||
#define MSG_SD_CARD_OK "Tarcheta SD OK"
|
||
#define MSG_SD_WORKDIR_FAIL "Fallo en ubrir a carpeta de treballo"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Error en ubrir, Fichero: "
|
||
#define MSG_SD_FILE_OPENED "Fichero ubierto:"
|
||
#define MSG_SD_SIZE " Grandaria:"
|
||
#define MSG_SD_FILE_SELECTED "Fichero Seleccionau"
|
||
#define MSG_SD_WRITE_TO_FILE "Escribindo en o fichero: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprentando o byte "
|
||
#define MSG_SD_NOT_PRINTING "No se ye imprentando con SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Error en escribir en o fichero"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede ubrir a carpeta:"
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate masiau alto : "
|
||
#define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||
|
||
#endif
|
||
|
||
#if LANGUAGE_CHOICE == 11 //Dutch
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " gereed."
|
||
#define MSG_SD_INSERTED "Kaart ingestoken"
|
||
#define MSG_SD_REMOVED "Kaart verwijderd"
|
||
#define MSG_MAIN "Main"
|
||
#define MSG_AUTOSTART "Autostart"
|
||
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
||
#define MSG_AUTO_HOME "Auto home"
|
||
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
||
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
|
||
#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
|
||
#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"
|
||
#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"
|
||
#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
|
||
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
|
||
#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"
|
||
#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"
|
||
#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"
|
||
#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
|
||
#define MSG_COOLDOWN "Afkoelen"
|
||
#define MSG_SWITCH_PS_ON "Stroom aan"
|
||
#define MSG_SWITCH_PS_OFF "Stroom uit"
|
||
#define MSG_EXTRUDE "Extrude"
|
||
#define MSG_RETRACT "Retract"
|
||
#define MSG_MOVE_AXIS "As verplaatsen"
|
||
#define MSG_MOVE_X "Verplaats X"
|
||
#define MSG_MOVE_Y "Verplaats Y"
|
||
#define MSG_MOVE_Z "Verplaats Z"
|
||
#define MSG_MOVE_E "Extruder"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Verplaats 0.1mm"
|
||
#define MSG_MOVE_1MM "Verplaats 1mm"
|
||
#define MSG_MOVE_10MM "Verplaats 10mm"
|
||
#define MSG_SPEED "Snelheid"
|
||
#define MSG_NOZZLE "Nozzle"
|
||
#define MSG_NOZZLE1 "Nozzle2"
|
||
#define MSG_NOZZLE2 "Nozzle3"
|
||
#define MSG_BED "Bed"
|
||
#define MSG_FAN_SPEED "Fan snelheid"
|
||
#define MSG_FLOW "Flow"
|
||
#define MSG_FLOW0 "Flow 0"
|
||
#define MSG_FLOW1 "Flow 1"
|
||
#define MSG_FLOW2 "Flow 2"
|
||
#define MSG_CONTROL "Control"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Fact"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "Aan "
|
||
#define MSG_OFF "Uit"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Versn"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract"
|
||
#define MSG_XSTEPS "Xsteps/mm"
|
||
#define MSG_YSTEPS "Ysteps/mm"
|
||
#define MSG_ZSTEPS "Zsteps/mm"
|
||
#define MSG_ESTEPS "Esteps/mm"
|
||
#define MSG_RECTRACT "Terugtrekken"
|
||
#define MSG_TEMPERATURE "Temperatuur"
|
||
#define MSG_MOTION "Beweging"
|
||
#define MSG_CONTRAST "LCD contrast"
|
||
#define MSG_STORE_EPROM "Geheugen opslaan"
|
||
#define MSG_LOAD_EPROM "Geheugen laden"
|
||
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
|
||
#define MSG_REFRESH "Ververs"
|
||
#define MSG_WATCH "Info scherm"
|
||
#define MSG_PREPARE "Voorbereiden"
|
||
#define MSG_TUNE "Afstellen"
|
||
#define MSG_PAUSE_PRINT "Print pauzeren"
|
||
#define MSG_RESUME_PRINT "Print hervatten"
|
||
#define MSG_STOP_PRINT "Print stoppen"
|
||
#define MSG_CARD_MENU "Print van SD"
|
||
#define MSG_NO_CARD "Geen SD kaart"
|
||
#define MSG_DWELL "Slapen..."
|
||
#define MSG_USERWAIT "Wachten..."
|
||
#define MSG_RESUMING "Print hervatten"
|
||
#define MSG_NO_MOVE "Geen beweging."
|
||
#define MSG_KILLED "AFGEBROKEN. "
|
||
#define MSG_STOPPED "GESTOPT. "
|
||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
||
#define MSG_CONTROL_RETRACTF "Retract F"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Verv. Filament"
|
||
#define MSG_INIT_SDCARD "Init. SD kaart"
|
||
#define MSG_CNG_SDCARD "Verv. SD card"
|
||
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y voor Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystap X"
|
||
#define MSG_BABYSTEP_Y "Babystap Y"
|
||
#define MSG_BABYSTEP_Z "Babystap Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "Opstarten"
|
||
#define MSG_EXTERNAL_RESET " Externe Reset"
|
||
#define MSG_BROWNOUT_RESET " Lage voedingsspanning Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_AUTHOR " | Auteur: "
|
||
#define MSG_CONFIGURATION_VER " Laatst bijgewerkt: "
|
||
#define MSG_FREE_MEMORY " Vrij Geheugen: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Bestand opslaan voltooid."
|
||
#define MSG_ERR_LINE_NO "Regelnummer is niet het laatste regelnummer+1, Laatste regel: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Checksum fout, Laatste regel: "
|
||
#define MSG_ERR_NO_CHECKSUM "Regel zonder checksum, Laatste regel: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Geen regelnummer met checksum, Laatste regel: "
|
||
#define MSG_FILE_PRINTED "Bestand afdrukken klaar"
|
||
#define MSG_BEGIN_FILE_LIST "Begin bestandslijst"
|
||
#define MSG_END_FILE_LIST "Einde bestandslijst"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Ongeldige extruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Ongeldige extruder "
|
||
#define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder "
|
||
#define MSG_HEATING "Opwarmen..."
|
||
#define MSG_HEATING_COMPLETE "Opwarmen klaar."
|
||
#define MSG_BED_HEATING "Bed opwarmen."
|
||
#define MSG_BED_DONE "Bed klaar."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup voor gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Aantal X: "
|
||
#define MSG_ERR_KILLED "Printer stopgezet. kill() aangeroepen!"
|
||
#define MSG_ERR_STOPPED "Printer gestopt vanwege fouten. Los de fout op en gebruik M999 om opnieuw te starten. (Temperatuur is gereset, stel deze opnieuw in na herstart)"
|
||
#define MSG_RESEND "Opnieuw sturen: "
|
||
#define MSG_UNKNOWN_COMMAND "Onbekend commando: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Actieve Extruder: "
|
||
#define MSG_INVALID_EXTRUDER "Ongeldige extruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Eindstop statusrapportage:"
|
||
#define MSG_ENDSTOP_HIT "GERAAKT"
|
||
#define MSG_ENDSTOP_OPEN "open"
|
||
#define MSG_HOTEND_OFFSET "Hotend afwijking:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Kan subdirectory niet openen"
|
||
#define MSG_SD_INIT_FAIL "SD initialiseren mislukt"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init mislukt"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot mislukt"
|
||
#define MSG_SD_CARD_OK "SD kaart ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir openen mislukt"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Openen mislukt, bestand: "
|
||
#define MSG_SD_FILE_OPENED "Bestand geopend: "
|
||
#define MSG_SD_SIZE " Grootte: "
|
||
#define MSG_SD_FILE_SELECTED "Bestanden geselecteerd:"
|
||
#define MSG_SD_WRITE_TO_FILE "Schrijven naar bestand: "
|
||
#define MSG_SD_PRINTING_BYTE "SD printen byte: "
|
||
#define MSG_SD_NOT_PRINTING "Niet SD printen"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Fout tijdens het schrijven naar bestand:"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Kan subdirectory niet in: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "stapsnelheid te hoog:"
|
||
#define MSG_ENDSTOPS_HIT "endstops geraakt: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " Koude extrusie voorkomen"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " te lange extrusie voorkomen"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fout in menustructuur"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 12
|
||
|
||
// LCD Menu Messages
|
||
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " preparada."
|
||
#define MSG_SD_INSERTED "SD detectada."
|
||
#define MSG_SD_REMOVED "SD expulsada."
|
||
#define MSG_MAIN "Menu principal"
|
||
#define MSG_AUTOSTART "Inici automatic"
|
||
#define MSG_DISABLE_STEPPERS "Apagar motors"
|
||
#define MSG_AUTO_HOME "Home global"
|
||
#define MSG_SET_ORIGIN "Establir origen"
|
||
#define MSG_PREHEAT_PLA "Preescalfar PLA"
|
||
#define MSG_PREHEAT_PLA0 "Preescalfar PLA 1"
|
||
#define MSG_PREHEAT_PLA1 "Preescalfar PLA 2"
|
||
#define MSG_PREHEAT_PLA2 "Preescalfar PLA 3"
|
||
#define MSG_PREHEAT_PLA012 "Preesc. tot PLA"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA"
|
||
#define MSG_PREHEAT_ABS "Preescalfar ABS"
|
||
#define MSG_PREHEAT_ABS0 "Preescalfar ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Preescalfar ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Preescalfar ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Preesc. tot ABS"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS"
|
||
#define MSG_COOLDOWN "Refredar"
|
||
#define MSG_SWITCH_PS_ON "Switch power on"
|
||
#define MSG_SWITCH_PS_OFF "Switch power off"
|
||
#define MSG_EXTRUDE "Extruir"
|
||
#define MSG_RETRACT "Refredar"
|
||
#define MSG_MOVE_AXIS "Moure eixos"
|
||
#define MSG_MOVE_X "Moure X"
|
||
#define MSG_MOVE_Y "Moure Y"
|
||
#define MSG_MOVE_Z "Moure Z"
|
||
#define MSG_MOVE_E "Extrusor"
|
||
#define MSG_MOVE_E1 "Extruder2"
|
||
#define MSG_MOVE_E2 "Extruder3"
|
||
#define MSG_MOVE_01MM "Moure 0.1mm"
|
||
#define MSG_MOVE_1MM "Moure 1mm"
|
||
#define MSG_MOVE_10MM "Moure 10mm"
|
||
#define MSG_SPEED "Velocitat"
|
||
#define MSG_NOZZLE "Nozzle"
|
||
#define MSG_NOZZLE1 "Nozzle2"
|
||
#define MSG_NOZZLE2 "Nozzle3"
|
||
#define MSG_BED "Llit"
|
||
#define MSG_FAN_SPEED "Vel. Ventilador"
|
||
#define MSG_FLOW "Fluxe"
|
||
#define MSG_FLOW0 "Fluxe 0"
|
||
#define MSG_FLOW1 "Fluxe 1"
|
||
#define MSG_FLOW2 "Fluxe 2"
|
||
#define MSG_CONTROL "Control"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Fact"
|
||
#define MSG_AUTOTEMP "Autotemp"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Accel"
|
||
#define MSG_VXY_JERK "Vxy-jerk"
|
||
#define MSG_VZ_JERK "Vz-jerk"
|
||
#define MSG_VE_JERK "Ve-jerk"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retract"
|
||
#define MSG_XSTEPS "Xpassos/mm"
|
||
#define MSG_YSTEPS "Ypassos/mm"
|
||
#define MSG_ZSTEPS "Zpassos/mm"
|
||
#define MSG_ESTEPS "Epassos/mm"
|
||
#define MSG_RECTRACT "Retreure"
|
||
#define MSG_TEMPERATURE "Temperatura"
|
||
#define MSG_MOTION "Moviment"
|
||
#define MSG_CONTRAST "Contrast de LCD"
|
||
#define MSG_STORE_EPROM "Desar a memoria"
|
||
#define MSG_LOAD_EPROM "Carregar de mem."
|
||
#define MSG_RESTORE_FAILSAFE "Rest. emergencia"
|
||
#define MSG_REFRESH "Refrescar"
|
||
#define MSG_WATCH "Pantalla Info."
|
||
#define MSG_PREPARE "Preparar"
|
||
#define MSG_TUNE "Calibrar"
|
||
#define MSG_PAUSE_PRINT "Pausa imp."
|
||
#define MSG_RESUME_PRINT "Reprendre imp."
|
||
#define MSG_STOP_PRINT "Parar inp."
|
||
#define MSG_CARD_MENU "Imprimir de SD"
|
||
#define MSG_NO_CARD "-Sense targeta SD"
|
||
#define MSG_DWELL "Repos..."
|
||
#define MSG_USERWAIT "Esperant usuari.."
|
||
#define MSG_RESUMING "Reprenent imp."
|
||
#define MSG_NO_MOVE "Sense moviment."
|
||
#define MSG_KILLED "PARADA DE EMERG. "
|
||
#define MSG_STOPPED "ATURAT. "
|
||
#define MSG_CONTROL_RETRACT "Retreure mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Swap Retreure mm"
|
||
#define MSG_CONTROL_RETRACTF "Retreure F"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
||
#define MSG_AUTORETRACT "AutoRetr."
|
||
#define MSG_FILAMENTCHANGE "Canviar filament"
|
||
#define MSG_INIT_SDCARD "Iniciant SD"
|
||
#define MSG_CNG_SDCARD "Canviar SD"
|
||
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
||
#define MSG_POSITION_UNKNOWN "Home X/Y abans Z"
|
||
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "en cua \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Extern"
|
||
#define MSG_BROWNOUT_RESET " Reset per Voltatge Incorrecte"
|
||
#define MSG_WATCHDOG_RESET " Reset per Bloqueix"
|
||
#define MSG_SOFTWARE_RESET " Reset per Software"
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER "Ultima actualitzacio: "
|
||
#define MSG_FREE_MEMORY " Memoria lliure: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Fitxer desat."
|
||
#define MSG_ERR_LINE_NO "El Numero de la Linia no es igual al Ultimo Numero de Linia+1, Ultima Linia:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincideix, Ultima Linia:"
|
||
#define MSG_ERR_NO_CHECKSUM "No s'ha trobat el Checksum amb el numero de linea, Ultima Linea:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No s'ha trobat Numero de Linea amb el Checksum, Ultima Linea:"
|
||
#define MSG_FILE_PRINTED "Impresio acabada"
|
||
#define MSG_BEGIN_FILE_LIST "Inici de la llista d'arxius"
|
||
#define MSG_END_FILE_LIST "Fi de la llista d'arxius"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalid "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalid "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalid "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalid "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalid "
|
||
#define MSG_ERR_NO_THERMISTORS "No hi ha termistors - sense temperatura"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalid "
|
||
#define MSG_HEATING "Escalfant..."
|
||
#define MSG_HEATING_COMPLETE "Escalfament acabat."
|
||
#define MSG_BED_HEATING "Escalfant llit."
|
||
#define MSG_BED_DONE "Llit Calent."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " Count X: "
|
||
#define MSG_ERR_KILLED "Impressora Parada per kill()!"
|
||
#define MSG_ERR_STOPPED "Impressora Parada per errors. Repara l'error i utilitza M999 per reiniciar!. (Hi ha un reset de temperatura, cal ajustarla abans de continuuar)"
|
||
#define MSG_RESEND "Reenviar: "
|
||
#define MSG_UNKNOWN_COMMAND "Comanda Desconeguda: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor Actiu: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor Invalid"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Comprobant finals de carrera."
|
||
#define MSG_ENDSTOP_HIT "Activat"
|
||
#define MSG_ENDSTOP_OPEN "obert"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "No s'ha pogut obrir la carpeta"
|
||
#define MSG_SD_INIT_FAIL "Error al iniciar la SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Error al montar el volum"
|
||
#define MSG_SD_OPENROOT_FAIL "Error al obrir la carpeta arrel"
|
||
#define MSG_SD_CARD_OK "Targeta SD OK"
|
||
#define MSG_SD_WORKDIR_FAIL "Error al obrir la carpeta de treball"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Error al obrir, Fitxer: "
|
||
#define MSG_SD_FILE_OPENED "Fitxer obert:"
|
||
#define MSG_SD_SIZE " Mida: "
|
||
#define MSG_SD_FILE_SELECTED "Fitxer Seleccionat"
|
||
#define MSG_SD_WRITE_TO_FILE "Desant al fitxer: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprimint el byte "
|
||
#define MSG_SD_NOT_PRINTING "No s'està imprimint amb SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Error al esciure al fitxer"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "No es pot obrir la carpeta: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Steprate massa alt: "
|
||
#define MSG_ENDSTOPS_HIT "S'ha tocat el final de carrera: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusio freda evitada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusio massa llarga evitada"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error a l'estructura dels menus"
|
||
|
||
#endif
|
||
|
||
//Basque-Euskera
|
||
#if LANGUAGE_CHOICE == 13
|
||
|
||
// LCD Menu Messages
|
||
// Please note these are limited to 17 characters!
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " prest."
|
||
#define MSG_SD_INSERTED "Txartela sartuta"
|
||
#define MSG_SD_REMOVED "Txartela kenduta"
|
||
#define MSG_MAIN "Menu nagusia"
|
||
#define MSG_AUTOSTART "Auto hasiera"
|
||
#define MSG_DISABLE_STEPPERS "Itzali motoreak"
|
||
#define MSG_AUTO_HOME "Hasierara joan"
|
||
#define MSG_SET_ORIGIN "Hasiera ipini"
|
||
#define MSG_PREHEAT_PLA "Aurreberotu PLA"
|
||
#define MSG_PREHEAT_PLA0 "Aurreberotu PLA1"
|
||
#define MSG_PREHEAT_PLA1 "Aurreberotu PLA2"
|
||
#define MSG_PREHEAT_PLA2 "Aurreberotu PLA3"
|
||
#define MSG_PREHEAT_PLA012 "Berotu PLA Guztia"
|
||
#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea"
|
||
#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig"
|
||
#define MSG_PREHEAT_ABS "Aurreberotu ABS"
|
||
#define MSG_PREHEAT_ABS0 "Aurreberotu ABS 1"
|
||
#define MSG_PREHEAT_ABS1 "Aurreberotu ABS 2"
|
||
#define MSG_PREHEAT_ABS2 "Aurreberotu ABS 3"
|
||
#define MSG_PREHEAT_ABS012 "Berotu ABS Guztia"
|
||
#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea"
|
||
#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig"
|
||
#define MSG_COOLDOWN "Hoztu"
|
||
#define MSG_SWITCH_PS_ON "Energia piztu"
|
||
#define MSG_SWITCH_PS_OFF "Energia itzali"
|
||
#define MSG_EXTRUDE "Estruitu"
|
||
#define MSG_RETRACT "Atzera eragin"
|
||
#define MSG_MOVE_AXIS "Ardatzak mugitu"
|
||
#define MSG_MOVE_X "Mugitu X"
|
||
#define MSG_MOVE_Y "Mugitu Y"
|
||
#define MSG_MOVE_Z "Mugitu Z"
|
||
#define MSG_MOVE_E "Estrusorea"
|
||
#define MSG_MOVE_E1 "Estrusorea2"
|
||
#define MSG_MOVE_E2 "Estrusorea3"
|
||
#define MSG_MOVE_01MM "Mugitu 0.1mm"
|
||
#define MSG_MOVE_1MM "Mugitu 1mm"
|
||
#define MSG_MOVE_10MM "Mugitu 10mm"
|
||
#define MSG_SPEED "Abiadura"
|
||
#define MSG_NOZZLE "Pita"
|
||
#define MSG_NOZZLE1 "Pita2"
|
||
#define MSG_NOZZLE2 "Pita3"
|
||
#define MSG_BED "Ohea"
|
||
#define MSG_FAN_SPEED "Haizagailua"
|
||
#define MSG_FLOW "Fluxua"
|
||
#define MSG_FLOW0 "Fluxua 0"
|
||
#define MSG_FLOW1 "Fluxua 1"
|
||
#define MSG_FLOW2 "Fluxua 2"
|
||
#define MSG_CONTROL "Kontrola"
|
||
#define MSG_MIN " \002 Min"
|
||
#define MSG_MAX " \002 Max"
|
||
#define MSG_FACTOR " \002 Faktorea"
|
||
#define MSG_AUTOTEMP "Auto tenperatura"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P "PID-P"
|
||
#define MSG_PID_I "PID-I"
|
||
#define MSG_PID_D "PID-D"
|
||
#define MSG_PID_C "PID-C"
|
||
#define MSG_ACC "Azelerazioa"
|
||
#define MSG_VXY_JERK "Vxy-astindua"
|
||
#define MSG_VZ_JERK "Vz-astindua"
|
||
#define MSG_VE_JERK "Ve-astindua"
|
||
#define MSG_VMAX "Vmax "
|
||
#define MSG_X "x"
|
||
#define MSG_Y "y"
|
||
#define MSG_Z "z"
|
||
#define MSG_E "e"
|
||
#define MSG_VMIN "Vmin"
|
||
#define MSG_VTRAV_MIN "VTrav min"
|
||
#define MSG_AMAX "Amax "
|
||
#define MSG_A_RETRACT "A-retrakt"
|
||
#define MSG_XSTEPS "X pausoak/mm"
|
||
#define MSG_YSTEPS "Y pausoak/mm"
|
||
#define MSG_ZSTEPS "Z pausoak/mm"
|
||
#define MSG_ESTEPS "E pausoak/mm"
|
||
#define MSG_RECTRACT "Atzera eragin"
|
||
#define MSG_TEMPERATURE "Tenperatura"
|
||
#define MSG_MOTION "Mugimendua"
|
||
#define MSG_CONTRAST "LCD kontrastea"
|
||
#define MSG_STORE_EPROM "Gorde memoria"
|
||
#define MSG_LOAD_EPROM "Kargatu memoria"
|
||
#define MSG_RESTORE_FAILSAFE "Larri. berriz."
|
||
#define MSG_REFRESH "Berriz kargatu"
|
||
#define MSG_WATCH "Pantaila info"
|
||
#define MSG_PREPARE "Prestatu"
|
||
#define MSG_TUNE "Doitu"
|
||
#define MSG_PAUSE_PRINT "Pausatu inprimak."
|
||
#define MSG_RESUME_PRINT "Jarraitu inprima."
|
||
#define MSG_STOP_PRINT "Gelditu inprima."
|
||
#define MSG_CARD_MENU "SD-tik inprimatu"
|
||
#define MSG_NO_CARD "Ez dago txartelik"
|
||
#define MSG_DWELL "Lo egin..."
|
||
#define MSG_USERWAIT "Aginduak zain..."
|
||
#define MSG_RESUMING "Jarraitzen inpri."
|
||
#define MSG_NO_MOVE "Mugimendu gabe"
|
||
#define MSG_KILLED "LARRIALDI GELDIA"
|
||
#define MSG_STOPPED "GELDITUTA. "
|
||
#define MSG_CONTROL_RETRACT "Atzera egin mm"
|
||
#define MSG_CONTROL_RETRACT_SWAP "Swap Atzera egin mm"
|
||
#define MSG_CONTROL_RETRACTF "Atzera egin V"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT "Igo mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V"
|
||
#define MSG_AUTORETRACT "Atzera egin"
|
||
#define MSG_FILAMENTCHANGE "Aldatu filament."
|
||
#define MSG_INIT_SDCARD "Hasieratu txartela"
|
||
#define MSG_CNG_SDCARD "Aldatu txartela"
|
||
#define MSG_ZPROBE_OUT "Z ohe hasiera"
|
||
#define MSG_POSITION_UNKNOWN "Posizio ezezaguna"
|
||
#define MSG_ZPROBE_ZOFFSET "Z konpentsatu"
|
||
#define MSG_BABYSTEP_X "Babystep X"
|
||
#define MSG_BABYSTEP_Y "Babystep Y"
|
||
#define MSG_BABYSTEP_Z "Babystep Z"
|
||
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Zerrendan \""
|
||
#define MSG_POWERUP "Pizketa"
|
||
#define MSG_EXTERNAL_RESET " Kanpoko Reset"
|
||
#define MSG_BROWNOUT_RESET " Tentsio Okerra Reset"
|
||
#define MSG_WATCHDOG_RESET " Reset Blokeoa"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_AUTHOR " | Egilea: "
|
||
#define MSG_CONFIGURATION_VER " Azken Aktualizazio: "
|
||
#define MSG_FREE_MEMORY " Aske Memoria: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Gordetuta."
|
||
#define MSG_ERR_LINE_NO "Lerro zenbakia ez da azken zenbakia+1 berdina, Azken Lerroa: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum-ak ez du aldiberekotasuna, Azken Lerroa: "
|
||
#define MSG_ERR_NO_CHECKSUM "Ez da checksum-ik aurkitu lerro zenbakian, Azken Lerroa: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ez da lerro zenbakia aurkitu checksum-arekin, Azken Lerroa: "
|
||
#define MSG_FILE_PRINTED "Inprimaketa bukatua"
|
||
#define MSG_BEGIN_FILE_LIST "Hasi artxibo zerrenda"
|
||
#define MSG_END_FILE_LIST "Amaitu artxibo zerrenda"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Balio gabeko Estrusorea "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Balio gabeko Estrusorea "
|
||
#define MSG_M200_INVALID_EXTRUDER "M200 Balio gabeko Estrusorea "
|
||
#define MSG_M218_INVALID_EXTRUDER "M218 Balio gabeko Estrusorea "
|
||
#define MSG_M221_INVALID_EXTRUDER "M221 Balio gabeko Estrusorea "
|
||
#define MSG_ERR_NO_THERMISTORS "Termistorerik ez dago - Tenperaturarik gabe"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Balio gabeko Estrusorea "
|
||
#define MSG_HEATING "Berotzen..."
|
||
#define MSG_HEATING_COMPLETE "berotuta."
|
||
#define MSG_BED_HEATING "Ohea berotzen."
|
||
#define MSG_BED_DONE "Ohea berotuta."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||
#define MSG_COUNT_X " X Kontu: "
|
||
#define MSG_ERR_KILLED "Inprimagailua geldituta. kill() called!"
|
||
#define MSG_ERR_STOPPED "Akatsen eraginez inprimagailua geldituta. Errorea konpondu eta M999 erabili berrabiarazteko. (Tenperatura galdu egin da. Berriro ipini)"
|
||
#define MSG_RESEND "Bidali berriro: "
|
||
#define MSG_UNKNOWN_COMMAND "Agindu ezezaguna: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Estrusore Aktiboa: "
|
||
#define MSG_INVALID_EXTRUDER "Balio gabeko Estrusorea"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Bide amaiera egiaztatzen"
|
||
#define MSG_ENDSTOP_HIT "Sakatuta"
|
||
#define MSG_ENDSTOP_OPEN "irekia"
|
||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Azpidirektorio ezin da ireki"
|
||
#define MSG_SD_INIT_FAIL "Akatsa txartela hasterakoan"
|
||
#define MSG_SD_VOL_INIT_FAIL "Akatsa partizioa hasterakoan"
|
||
#define MSG_SD_OPENROOT_FAIL "Akatsa direktorio nagusian"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Akatsa lan direktorioan"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Akatsa irekitzean, File: "
|
||
#define MSG_SD_FILE_OPENED "Artxiboa irekita: "
|
||
#define MSG_SD_SIZE " Tamaina: "
|
||
#define MSG_SD_FILE_SELECTED "Artxiboa aukeratuta"
|
||
#define MSG_SD_WRITE_TO_FILE "Artxiboa idazten: "
|
||
#define MSG_SD_PRINTING_BYTE "SD byte idazten "
|
||
#define MSG_SD_NOT_PRINTING "Ez dago SD-tik inprimatzen"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Akatsak artxiboa idazten"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Azpidirektorio ezin da ireki: "
|
||
|
||
#define MSG_STEPPER_TOO_HIGH "Motorra oso goi dago: "
|
||
#define MSG_ENDSTOPS_HIT "Bide amaiera ukitu da: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " estrusio hotza saihestua"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " estrusio oso luzea saihestua"
|
||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Akatsak menu-an"
|
||
|
||
#endif
|
||
|
||
#endif // ifndef LANGUAGE_H
|