mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 12:04:19 +00:00
306 lines
14 KiB
C
306 lines
14 KiB
C
/* **************************************************************************
|
||
|
||
Marlin 3D Printer Firmware
|
||
Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||
|
||
Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
|
||
|
||
This program is free software: you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation, either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
****************************************************************************/
|
||
|
||
/**
|
||
* Description: HAL for __AVR__
|
||
*/
|
||
|
||
#ifndef _HAL_AVR_H_
|
||
#define _HAL_AVR_H_
|
||
|
||
// --------------------------------------------------------------------------
|
||
// Includes
|
||
// --------------------------------------------------------------------------
|
||
|
||
#include "fastio.h"
|
||
|
||
#include <stdint.h>
|
||
#include <Arduino.h>
|
||
#include <util/delay.h>
|
||
#include <avr/eeprom.h>
|
||
#include <avr/pgmspace.h>
|
||
#include <avr/interrupt.h>
|
||
#include <avr/io.h>
|
||
|
||
// --------------------------------------------------------------------------
|
||
// Defines
|
||
// --------------------------------------------------------------------------
|
||
|
||
//#define analogInputToDigitalPin(IO) IO
|
||
|
||
// Bracket code that shouldn't be interrupted
|
||
#ifndef CRITICAL_SECTION_START
|
||
#define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli();
|
||
#define CRITICAL_SECTION_END SREG = _sreg;
|
||
#endif
|
||
|
||
// --------------------------------------------------------------------------
|
||
// Types
|
||
// --------------------------------------------------------------------------
|
||
|
||
typedef uint16_t hal_timer_t;
|
||
#define HAL_TIMER_TYPE_MAX 0xFFFF
|
||
|
||
typedef int8_t pin_t;
|
||
|
||
#define HAL_SERVO_LIB Servo
|
||
|
||
// --------------------------------------------------------------------------
|
||
// Public Variables
|
||
// --------------------------------------------------------------------------
|
||
|
||
//extern uint8_t MCUSR;
|
||
|
||
// --------------------------------------------------------------------------
|
||
// Public functions
|
||
// --------------------------------------------------------------------------
|
||
|
||
//void cli(void);
|
||
|
||
//void _delay_ms(const int delay);
|
||
|
||
inline void HAL_clear_reset_source(void) { MCUSR = 0; }
|
||
inline uint8_t HAL_get_reset_source(void) { return MCUSR; }
|
||
|
||
// eeprom
|
||
//void eeprom_write_byte(unsigned char *pos, unsigned char value);
|
||
//unsigned char eeprom_read_byte(unsigned char *pos);
|
||
|
||
// timers
|
||
#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz
|
||
|
||
#define STEP_TIMER_NUM 1
|
||
#define TEMP_TIMER_NUM 0
|
||
#define PULSE_TIMER_NUM TEMP_TIMER_NUM
|
||
|
||
#define HAL_STEPPER_TIMER_RATE HAL_TIMER_RATE
|
||
#define HAL_TICKS_PER_US ((HAL_STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
|
||
#define STEPPER_TIMER_PRESCALE 8
|
||
#define STEP_TIMER_MIN_INTERVAL 8 // minimum time in µs between stepper interrupts
|
||
|
||
#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0)
|
||
|
||
#define TIMER_OCR_1 OCR1A
|
||
#define TIMER_COUNTER_1 TCNT1
|
||
|
||
#define TIMER_OCR_0 OCR0A
|
||
#define TIMER_COUNTER_0 TCNT0
|
||
|
||
#define PULSE_TIMER_PRESCALE 8
|
||
|
||
#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A)
|
||
#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
|
||
#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A)
|
||
|
||
#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B)
|
||
#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B)
|
||
#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B)
|
||
|
||
#define HAL_timer_start(timer_num, frequency)
|
||
|
||
#define _CAT(a, ...) a ## __VA_ARGS__
|
||
#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
|
||
#define HAL_timer_restrain(timer, interval_ticks) NOLESS(_CAT(TIMER_OCR_, timer), _CAT(TIMER_COUNTER_, timer) + interval_ticks)
|
||
|
||
#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
|
||
#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
|
||
|
||
/**
|
||
* On AVR there is no hardware prioritization and preemption of
|
||
* interrupts, so this emulates it. The UART has first priority
|
||
* (otherwise, characters will be lost due to UART overflow).
|
||
* Then: Stepper, Endstops, Temperature, and -finally- all others.
|
||
*/
|
||
#define HAL_timer_isr_prologue(TIMER_NUM)
|
||
#define HAL_timer_isr_epilogue(TIMER_NUM)
|
||
|
||
/* 18 cycles maximum latency */
|
||
#define HAL_STEP_TIMER_ISR \
|
||
extern "C" void TIMER1_COMPA_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
|
||
extern "C" void TIMER1_COMPA_vect_bottom (void) asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
|
||
void TIMER1_COMPA_vect (void) { \
|
||
__asm__ __volatile__ ( \
|
||
A("push r16") /* 2 Save R16 */ \
|
||
A("in r16, __SREG__") /* 1 Get SREG */ \
|
||
A("push r16") /* 2 Save SREG into stack */ \
|
||
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
|
||
A("push r16") /* 2 Save TIMSK0 into the stack */ \
|
||
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
|
||
A("sts %[timsk0], r16") /* 2 And set the new value */ \
|
||
A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
|
||
A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \
|
||
A("sts %[timsk1], r16") /* 2 And set the new value */ \
|
||
A("sei") /* 1 Enable global interrupts - stepper and temperature ISRs are disabled, so no risk of reentry or being preempted by the temperature ISR */ \
|
||
A("push r16") /* 2 Save TIMSK1 into stack */ \
|
||
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
|
||
A("push r16") /* 2 Save RAMPZ into stack */ \
|
||
A("in r16, 0x3C") /* 1 Get EIND register */ \
|
||
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
|
||
A("push r1") \
|
||
A("push r18") \
|
||
A("push r19") \
|
||
A("push r20") \
|
||
A("push r21") \
|
||
A("push r22") \
|
||
A("push r23") \
|
||
A("push r24") \
|
||
A("push r25") \
|
||
A("push r26") \
|
||
A("push r27") \
|
||
A("push r30") \
|
||
A("push r31") \
|
||
A("clr r1") /* C runtime expects this register to be 0 */ \
|
||
A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
|
||
A("pop r31") \
|
||
A("pop r30") \
|
||
A("pop r27") \
|
||
A("pop r26") \
|
||
A("pop r25") \
|
||
A("pop r24") \
|
||
A("pop r23") \
|
||
A("pop r22") \
|
||
A("pop r21") \
|
||
A("pop r20") \
|
||
A("pop r19") \
|
||
A("pop r18") \
|
||
A("pop r1") \
|
||
A("pop r0") \
|
||
A("out 0x3C, r16") /* 1 Restore EIND register */ \
|
||
A("pop r16") /* 2 Get the original RAMPZ register value */ \
|
||
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
|
||
A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
|
||
A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \
|
||
A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
|
||
A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \
|
||
A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
|
||
A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \
|
||
A("pop r16") /* 2 Get the old SREG value */ \
|
||
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
|
||
A("pop r16") /* 2 Restore R16 value */ \
|
||
A("reti") /* 4 Return from interrupt */ \
|
||
: \
|
||
: [timsk0] "i" ((uint16_t)&TIMSK0), \
|
||
[timsk1] "i" ((uint16_t)&TIMSK1), \
|
||
[msk0] "M" ((uint8_t)(1<<OCIE0B)),\
|
||
[msk1] "M" ((uint8_t)(1<<OCIE1A)) \
|
||
: \
|
||
); \
|
||
} \
|
||
void TIMER1_COMPA_vect_bottom(void)
|
||
|
||
/* 14 cycles maximum latency */
|
||
#define HAL_TEMP_TIMER_ISR \
|
||
extern "C" void TIMER0_COMPB_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
|
||
extern "C" void TIMER0_COMPB_vect_bottom(void) asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
|
||
void TIMER0_COMPB_vect (void) { \
|
||
__asm__ __volatile__ ( \
|
||
A("push r16") /* 2 Save R16 */ \
|
||
A("in r16, __SREG__") /* 1 Get SREG */ \
|
||
A("push r16") /* 2 Save SREG into stack */ \
|
||
A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
|
||
A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \
|
||
A("sts %[timsk0], r16") /* 2 And set the new value */ \
|
||
A("sei") /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */ \
|
||
A("push r16") /* 2 Save TIMSK0 into stack */ \
|
||
A("in r16, 0x3B") /* 1 Get RAMPZ register */ \
|
||
A("push r16") /* 2 Save RAMPZ into stack */ \
|
||
A("in r16, 0x3C") /* 1 Get EIND register */ \
|
||
A("push r0") /* C runtime can modify all the following registers without restoring them */ \
|
||
A("push r1") \
|
||
A("push r18") \
|
||
A("push r19") \
|
||
A("push r20") \
|
||
A("push r21") \
|
||
A("push r22") \
|
||
A("push r23") \
|
||
A("push r24") \
|
||
A("push r25") \
|
||
A("push r26") \
|
||
A("push r27") \
|
||
A("push r30") \
|
||
A("push r31") \
|
||
A("clr r1") /* C runtime expects this register to be 0 */ \
|
||
A("call TIMER0_COMPB_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \
|
||
A("pop r31") \
|
||
A("pop r30") \
|
||
A("pop r27") \
|
||
A("pop r26") \
|
||
A("pop r25") \
|
||
A("pop r24") \
|
||
A("pop r23") \
|
||
A("pop r22") \
|
||
A("pop r21") \
|
||
A("pop r20") \
|
||
A("pop r19") \
|
||
A("pop r18") \
|
||
A("pop r1") \
|
||
A("pop r0") \
|
||
A("out 0x3C, r16") /* 1 Restore EIND register */ \
|
||
A("pop r16") /* 2 Get the original RAMPZ register value */ \
|
||
A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \
|
||
A("pop r16") /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
|
||
A("ori r16,%[msk0]") /* 1 Enable temperature ISR */ \
|
||
A("cli") /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don´t want to reenter this handler until the current one is done */ \
|
||
A("sts %[timsk0], r16") /* 2 And restore the old value */ \
|
||
A("pop r16") /* 2 Get the old SREG */ \
|
||
A("out __SREG__, r16") /* 1 And restore the SREG value */ \
|
||
A("pop r16") /* 2 Restore R16 */ \
|
||
A("reti") /* 4 Return from interrupt */ \
|
||
: \
|
||
: [timsk0] "i"((uint16_t)&TIMSK0), \
|
||
[msk0] "M" ((uint8_t)(1<<OCIE0B)) \
|
||
: \
|
||
); \
|
||
} \
|
||
void TIMER0_COMPB_vect_bottom(void)
|
||
|
||
// ADC
|
||
#ifdef DIDR2
|
||
#define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)
|
||
#else
|
||
#define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0)
|
||
#endif
|
||
|
||
inline void HAL_adc_init(void) {
|
||
ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
|
||
DIDR0 = 0;
|
||
#ifdef DIDR2
|
||
DIDR2 = 0;
|
||
#endif
|
||
}
|
||
|
||
#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
|
||
#ifdef MUX5
|
||
#define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
|
||
#else
|
||
#define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
|
||
#endif
|
||
|
||
#define HAL_READ_ADC ADC
|
||
|
||
#define GET_PIN_MAP_PIN(index) index
|
||
#define GET_PIN_MAP_INDEX(pin) pin
|
||
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
|
||
|
||
#define HAL_SENSITIVE_PINS 0, 1
|
||
|
||
#endif // _HAL_AVR_H_
|