mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
2194 lines
67 KiB
C++
2194 lines
67 KiB
C++
/* -*- c++ -*- */
|
|
|
|
/*
|
|
Reprap firmware based on Sprinter and grbl.
|
|
Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
This firmware is a mashup between Sprinter and grbl.
|
|
(https://github.com/kliment/Sprinter)
|
|
(https://github.com/simen/grbl/tree)
|
|
|
|
It has preliminary support for Matthew Roberts advance algorithm
|
|
http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
|
|
*/
|
|
|
|
#include "Marlin.h"
|
|
|
|
#include "ultralcd.h"
|
|
#include "planner.h"
|
|
#include "stepper.h"
|
|
#include "temperature.h"
|
|
#include "motion_control.h"
|
|
#include "cardreader.h"
|
|
#include "watchdog.h"
|
|
#include "ConfigurationStore.h"
|
|
#include "language.h"
|
|
#include "pins_arduino.h"
|
|
|
|
#if DIGIPOTSS_PIN > -1
|
|
#include <SPI.h>
|
|
#endif
|
|
|
|
#define VERSION_STRING "1.0.0"
|
|
|
|
// look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html
|
|
// http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
|
|
|
|
//Implemented Codes
|
|
//-------------------
|
|
// G0 -> G1
|
|
// G1 - Coordinated Movement X Y Z E
|
|
// G2 - CW ARC
|
|
// G3 - CCW ARC
|
|
// G4 - Dwell S<seconds> or P<milliseconds>
|
|
// G10 - retract filament according to settings of M207
|
|
// G11 - retract recover filament according to settings of M208
|
|
// G28 - Home all Axis
|
|
// G90 - Use Absolute Coordinates
|
|
// G91 - Use Relative Coordinates
|
|
// G92 - Set current position to cordinates given
|
|
|
|
//RepRap M Codes
|
|
// M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
|
|
// M1 - Same as M0
|
|
// M104 - Set extruder target temp
|
|
// M105 - Read current temp
|
|
// M106 - Fan on
|
|
// M107 - Fan off
|
|
// M109 - Wait for extruder current temp to reach target temp.
|
|
// M114 - Display current position
|
|
|
|
//Custom M Codes
|
|
// M17 - Enable/Power all stepper motors
|
|
// M18 - Disable all stepper motors; same as M84
|
|
// M20 - List SD card
|
|
// M21 - Init SD card
|
|
// M22 - Release SD card
|
|
// M23 - Select SD file (M23 filename.g)
|
|
// M24 - Start/resume SD print
|
|
// M25 - Pause SD print
|
|
// M26 - Set SD position in bytes (M26 S12345)
|
|
// M27 - Report SD print status
|
|
// M28 - Start SD write (M28 filename.g)
|
|
// M29 - Stop SD write
|
|
// M30 - Delete file from SD (M30 filename.g)
|
|
// M31 - Output time since last M109 or SD card start to serial
|
|
// M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
|
|
// M80 - Turn on Power Supply
|
|
// M81 - Turn off Power Supply
|
|
// M82 - Set E codes absolute (default)
|
|
// M83 - Set E codes relative while in Absolute Coordinates (G90) mode
|
|
// M84 - Disable steppers until next move,
|
|
// or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
|
|
// M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
|
|
// M92 - Set axis_steps_per_unit - same syntax as G92
|
|
// M114 - Output current position to serial port
|
|
// M115 - Capabilities string
|
|
// M117 - display message
|
|
// M119 - Output Endstop status to serial port
|
|
// M140 - Set bed target temp
|
|
// M190 - Wait for bed current temp to reach target temp.
|
|
// M200 - Set filament diameter
|
|
// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
|
|
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
|
|
// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
|
|
// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate
|
|
// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
|
|
// M206 - set additional homeing offset
|
|
// M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop]
|
|
// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
|
|
// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
|
|
// M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
|
|
// M220 S<factor in percent>- set speed factor override percentage
|
|
// M221 S<factor in percent>- set extrude factor override percentage
|
|
// M240 - Trigger a camera to take a photograph
|
|
// M300 - Play beepsound S<frequency Hz> P<duration ms>
|
|
// M301 - Set PID parameters P I and D
|
|
// M302 - Allow cold extrudes
|
|
// M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
|
|
// M304 - Set bed PID parameters P I and D
|
|
// M400 - Finish all moves
|
|
// M500 - stores paramters in EEPROM
|
|
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
|
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
|
// M503 - print the current settings (from memory not from eeprom)
|
|
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
|
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
|
// M907 - Set digital trimpot motor current using axis codes.
|
|
// M908 - Control digital trimpot directly.
|
|
// M350 - Set microstepping mode.
|
|
// M351 - Toggle MS1 MS2 pins directly.
|
|
// M928 - Start SD logging (M928 filename.g) - ended by M29
|
|
// M999 - Restart after being stopped by error
|
|
|
|
//Stepper Movement Variables
|
|
|
|
//===========================================================================
|
|
//=============================imported variables============================
|
|
//===========================================================================
|
|
|
|
|
|
//===========================================================================
|
|
//=============================public variables=============================
|
|
//===========================================================================
|
|
#ifdef SDSUPPORT
|
|
CardReader card;
|
|
#endif
|
|
float homing_feedrate[] = HOMING_FEEDRATE;
|
|
bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
|
|
int feedmultiply=100; //100->1 200->2
|
|
int saved_feedmultiply;
|
|
int extrudemultiply=100; //100->1 200->2
|
|
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
|
|
float add_homeing[3]={0,0,0};
|
|
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
|
|
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
|
|
// Extruder offset, only in XY plane
|
|
#if EXTRUDERS > 1
|
|
float extruder_offset[2][EXTRUDERS] = {
|
|
#if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y)
|
|
EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y
|
|
#endif
|
|
};
|
|
#endif
|
|
uint8_t active_extruder = 0;
|
|
int fanSpeed=0;
|
|
|
|
#ifdef FWRETRACT
|
|
bool autoretract_enabled=true;
|
|
bool retracted=false;
|
|
float retract_length=3, retract_feedrate=17*60, retract_zlift=0.8;
|
|
float retract_recover_length=0, retract_recover_feedrate=8*60;
|
|
#endif
|
|
|
|
//===========================================================================
|
|
//=============================private variables=============================
|
|
//===========================================================================
|
|
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
|
|
static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0};
|
|
static float offset[3] = {0.0, 0.0, 0.0};
|
|
static bool home_all_axis = true;
|
|
static float feedrate = 1500.0, next_feedrate, saved_feedrate;
|
|
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
|
|
|
|
static bool relative_mode = false; //Determines Absolute or Relative Coordinates
|
|
|
|
static char cmdbuffer[BUFSIZE][MAX_CMD_SIZE];
|
|
static bool fromsd[BUFSIZE];
|
|
static int bufindr = 0;
|
|
static int bufindw = 0;
|
|
static int buflen = 0;
|
|
//static int i = 0;
|
|
static char serial_char;
|
|
static int serial_count = 0;
|
|
static boolean comment_mode = false;
|
|
static char *strchr_pointer; // just a pointer to find chars in the cmd string like X, Y, Z, E, etc
|
|
|
|
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
|
|
|
|
//static float tt = 0;
|
|
//static float bt = 0;
|
|
|
|
//Inactivity shutdown variables
|
|
static unsigned long previous_millis_cmd = 0;
|
|
static unsigned long max_inactive_time = 0;
|
|
static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l;
|
|
|
|
unsigned long starttime=0;
|
|
unsigned long stoptime=0;
|
|
|
|
static uint8_t tmp_extruder;
|
|
|
|
|
|
bool Stopped=false;
|
|
|
|
//===========================================================================
|
|
//=============================ROUTINES=============================
|
|
//===========================================================================
|
|
|
|
void get_arc_coordinates();
|
|
bool setTargetedHotend(int code);
|
|
|
|
void serial_echopair_P(const char *s_P, float v)
|
|
{ serialprintPGM(s_P); SERIAL_ECHO(v); }
|
|
void serial_echopair_P(const char *s_P, double v)
|
|
{ serialprintPGM(s_P); SERIAL_ECHO(v); }
|
|
void serial_echopair_P(const char *s_P, unsigned long v)
|
|
{ serialprintPGM(s_P); SERIAL_ECHO(v); }
|
|
|
|
extern "C"{
|
|
extern unsigned int __bss_end;
|
|
extern unsigned int __heap_start;
|
|
extern void *__brkval;
|
|
|
|
int freeMemory() {
|
|
int free_memory;
|
|
|
|
if((int)__brkval == 0)
|
|
free_memory = ((int)&free_memory) - ((int)&__bss_end);
|
|
else
|
|
free_memory = ((int)&free_memory) - ((int)__brkval);
|
|
|
|
return free_memory;
|
|
}
|
|
}
|
|
|
|
//adds an command to the main command buffer
|
|
//thats really done in a non-safe way.
|
|
//needs overworking someday
|
|
void enquecommand(const char *cmd)
|
|
{
|
|
if(buflen < BUFSIZE)
|
|
{
|
|
//this is dangerous if a mixing of serial and this happsens
|
|
strcpy(&(cmdbuffer[bufindw][0]),cmd);
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM("enqueing \"");
|
|
SERIAL_ECHO(cmdbuffer[bufindw]);
|
|
SERIAL_ECHOLNPGM("\"");
|
|
bufindw= (bufindw + 1)%BUFSIZE;
|
|
buflen += 1;
|
|
}
|
|
}
|
|
|
|
void enquecommand_P(const char *cmd)
|
|
{
|
|
if(buflen < BUFSIZE)
|
|
{
|
|
//this is dangerous if a mixing of serial and this happsens
|
|
strcpy_P(&(cmdbuffer[bufindw][0]),cmd);
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM("enqueing \"");
|
|
SERIAL_ECHO(cmdbuffer[bufindw]);
|
|
SERIAL_ECHOLNPGM("\"");
|
|
bufindw= (bufindw + 1)%BUFSIZE;
|
|
buflen += 1;
|
|
}
|
|
}
|
|
|
|
void setup_killpin()
|
|
{
|
|
#if( KILL_PIN>-1 )
|
|
pinMode(KILL_PIN,INPUT);
|
|
WRITE(KILL_PIN,HIGH);
|
|
#endif
|
|
}
|
|
|
|
void setup_photpin()
|
|
{
|
|
#ifdef PHOTOGRAPH_PIN
|
|
#if (PHOTOGRAPH_PIN > -1)
|
|
SET_OUTPUT(PHOTOGRAPH_PIN);
|
|
WRITE(PHOTOGRAPH_PIN, LOW);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void setup_powerhold()
|
|
{
|
|
#ifdef SUICIDE_PIN
|
|
#if (SUICIDE_PIN> -1)
|
|
SET_OUTPUT(SUICIDE_PIN);
|
|
WRITE(SUICIDE_PIN, HIGH);
|
|
#endif
|
|
#endif
|
|
#if (PS_ON_PIN > -1)
|
|
SET_OUTPUT(PS_ON_PIN);
|
|
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
|
#endif
|
|
}
|
|
|
|
void suicide()
|
|
{
|
|
#ifdef SUICIDE_PIN
|
|
#if (SUICIDE_PIN> -1)
|
|
SET_OUTPUT(SUICIDE_PIN);
|
|
WRITE(SUICIDE_PIN, LOW);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void setup()
|
|
{
|
|
setup_killpin();
|
|
setup_powerhold();
|
|
MYSERIAL.begin(BAUDRATE);
|
|
SERIAL_PROTOCOLLNPGM("start");
|
|
SERIAL_ECHO_START;
|
|
|
|
// Check startup - does nothing if bootloader sets MCUSR to 0
|
|
byte mcu = MCUSR;
|
|
if(mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP);
|
|
if(mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET);
|
|
if(mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET);
|
|
if(mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET);
|
|
if(mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET);
|
|
MCUSR=0;
|
|
|
|
SERIAL_ECHOPGM(MSG_MARLIN);
|
|
SERIAL_ECHOLNPGM(VERSION_STRING);
|
|
#ifdef STRING_VERSION_CONFIG_H
|
|
#ifdef STRING_CONFIG_H_AUTHOR
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
|
|
SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
|
|
SERIAL_ECHOPGM(MSG_AUTHOR);
|
|
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
|
|
SERIAL_ECHOPGM("Compiled: ");
|
|
SERIAL_ECHOLNPGM(__DATE__);
|
|
#endif
|
|
#endif
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM(MSG_FREE_MEMORY);
|
|
SERIAL_ECHO(freeMemory());
|
|
SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES);
|
|
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
|
|
for(int8_t i = 0; i < BUFSIZE; i++)
|
|
{
|
|
fromsd[i] = false;
|
|
}
|
|
|
|
Config_RetrieveSettings(); // loads data from EEPROM if available
|
|
|
|
for(int8_t i=0; i < NUM_AXIS; i++)
|
|
{
|
|
axis_steps_per_sqr_second[i] = max_acceleration_units_per_sq_second[i] * axis_steps_per_unit[i];
|
|
}
|
|
|
|
|
|
tp_init(); // Initialize temperature loop
|
|
plan_init(); // Initialize planner;
|
|
watchdog_init();
|
|
st_init(); // Initialize stepper, this enables interrupts!
|
|
setup_photpin();
|
|
|
|
lcd_init();
|
|
|
|
#ifdef CONTROLLERFAN_PIN
|
|
SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
|
|
#endif
|
|
|
|
#ifdef EXTRUDERFAN_PIN
|
|
SET_OUTPUT(EXTRUDERFAN_PIN); //Set pin used for extruder cooling fan
|
|
#endif
|
|
}
|
|
|
|
|
|
void loop()
|
|
{
|
|
if(buflen < (BUFSIZE-1))
|
|
get_command();
|
|
#ifdef SDSUPPORT
|
|
card.checkautostart(false);
|
|
#endif
|
|
if(buflen)
|
|
{
|
|
#ifdef SDSUPPORT
|
|
if(card.saving)
|
|
{
|
|
if(strstr_P(cmdbuffer[bufindr], PSTR("M29")) == NULL)
|
|
{
|
|
card.write_command(cmdbuffer[bufindr]);
|
|
if(card.logging)
|
|
{
|
|
process_commands();
|
|
}
|
|
else
|
|
{
|
|
SERIAL_PROTOCOLLNPGM(MSG_OK);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
card.closefile();
|
|
SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
process_commands();
|
|
}
|
|
#else
|
|
process_commands();
|
|
#endif //SDSUPPORT
|
|
buflen = (buflen-1);
|
|
bufindr = (bufindr + 1)%BUFSIZE;
|
|
}
|
|
//check heater every n milliseconds
|
|
manage_heater();
|
|
manage_inactivity();
|
|
checkHitEndstops();
|
|
lcd_update();
|
|
}
|
|
|
|
void get_command()
|
|
{
|
|
while( MYSERIAL.available() > 0 && buflen < BUFSIZE) {
|
|
serial_char = MYSERIAL.read();
|
|
if(serial_char == '\n' ||
|
|
serial_char == '\r' ||
|
|
(serial_char == ':' && comment_mode == false) ||
|
|
serial_count >= (MAX_CMD_SIZE - 1) )
|
|
{
|
|
if(!serial_count) { //if empty line
|
|
comment_mode = false; //for new command
|
|
return;
|
|
}
|
|
cmdbuffer[bufindw][serial_count] = 0; //terminate string
|
|
if(!comment_mode){
|
|
comment_mode = false; //for new command
|
|
fromsd[bufindw] = false;
|
|
if(strchr(cmdbuffer[bufindw], 'N') != NULL)
|
|
{
|
|
strchr_pointer = strchr(cmdbuffer[bufindw], 'N');
|
|
gcode_N = (strtol(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL, 10));
|
|
if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer[bufindw], PSTR("M110")) == NULL) ) {
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORPGM(MSG_ERR_LINE_NO);
|
|
SERIAL_ERRORLN(gcode_LastN);
|
|
//Serial.println(gcode_N);
|
|
FlushSerialRequestResend();
|
|
serial_count = 0;
|
|
return;
|
|
}
|
|
|
|
if(strchr(cmdbuffer[bufindw], '*') != NULL)
|
|
{
|
|
byte checksum = 0;
|
|
byte count = 0;
|
|
while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++];
|
|
strchr_pointer = strchr(cmdbuffer[bufindw], '*');
|
|
|
|
if( (int)(strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)) != checksum) {
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH);
|
|
SERIAL_ERRORLN(gcode_LastN);
|
|
FlushSerialRequestResend();
|
|
serial_count = 0;
|
|
return;
|
|
}
|
|
//if no errors, continue parsing
|
|
}
|
|
else
|
|
{
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM);
|
|
SERIAL_ERRORLN(gcode_LastN);
|
|
FlushSerialRequestResend();
|
|
serial_count = 0;
|
|
return;
|
|
}
|
|
|
|
gcode_LastN = gcode_N;
|
|
//if no errors, continue parsing
|
|
}
|
|
else // if we don't receive 'N' but still see '*'
|
|
{
|
|
if((strchr(cmdbuffer[bufindw], '*') != NULL))
|
|
{
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM);
|
|
SERIAL_ERRORLN(gcode_LastN);
|
|
serial_count = 0;
|
|
return;
|
|
}
|
|
}
|
|
if((strchr(cmdbuffer[bufindw], 'G') != NULL)){
|
|
strchr_pointer = strchr(cmdbuffer[bufindw], 'G');
|
|
switch((int)((strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)))){
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
if(Stopped == false) { // If printer is stopped by an error the G[0-3] codes are ignored.
|
|
#ifdef SDSUPPORT
|
|
if(card.saving)
|
|
break;
|
|
#endif //SDSUPPORT
|
|
SERIAL_PROTOCOLLNPGM(MSG_OK);
|
|
}
|
|
else {
|
|
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
|
|
LCD_MESSAGEPGM(MSG_STOPPED);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
bufindw = (bufindw + 1)%BUFSIZE;
|
|
buflen += 1;
|
|
}
|
|
serial_count = 0; //clear buffer
|
|
}
|
|
else
|
|
{
|
|
if(serial_char == ';') comment_mode = true;
|
|
if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char;
|
|
}
|
|
}
|
|
#ifdef SDSUPPORT
|
|
if(!card.sdprinting || serial_count!=0){
|
|
return;
|
|
}
|
|
while( !card.eof() && buflen < BUFSIZE) {
|
|
int16_t n=card.get();
|
|
serial_char = (char)n;
|
|
if(serial_char == '\n' ||
|
|
serial_char == '\r' ||
|
|
(serial_char == ':' && comment_mode == false) ||
|
|
serial_count >= (MAX_CMD_SIZE - 1)||n==-1)
|
|
{
|
|
if(card.eof()){
|
|
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
|
|
stoptime=millis();
|
|
char time[30];
|
|
unsigned long t=(stoptime-starttime)/1000;
|
|
int hours, minutes;
|
|
minutes=(t/60)%60;
|
|
hours=t/60/60;
|
|
sprintf_P(time, PSTR("%i hours %i minutes"),hours, minutes);
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLN(time);
|
|
lcd_setstatus(time);
|
|
card.printingHasFinished();
|
|
card.checkautostart(true);
|
|
|
|
}
|
|
if(!serial_count)
|
|
{
|
|
comment_mode = false; //for new command
|
|
return; //if empty line
|
|
}
|
|
cmdbuffer[bufindw][serial_count] = 0; //terminate string
|
|
// if(!comment_mode){
|
|
fromsd[bufindw] = true;
|
|
buflen += 1;
|
|
bufindw = (bufindw + 1)%BUFSIZE;
|
|
// }
|
|
comment_mode = false; //for new command
|
|
serial_count = 0; //clear buffer
|
|
}
|
|
else
|
|
{
|
|
if(serial_char == ';') comment_mode = true;
|
|
if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char;
|
|
}
|
|
}
|
|
|
|
#endif //SDSUPPORT
|
|
|
|
}
|
|
|
|
|
|
float code_value()
|
|
{
|
|
return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL));
|
|
}
|
|
|
|
long code_value_long()
|
|
{
|
|
return (strtol(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL, 10));
|
|
}
|
|
|
|
bool code_seen(char code)
|
|
{
|
|
strchr_pointer = strchr(cmdbuffer[bufindr], code);
|
|
return (strchr_pointer != NULL); //Return True if a character was found
|
|
}
|
|
|
|
#define DEFINE_PGM_READ_ANY(type, reader) \
|
|
static inline type pgm_read_any(const type *p) \
|
|
{ return pgm_read_##reader##_near(p); }
|
|
|
|
DEFINE_PGM_READ_ANY(float, float);
|
|
DEFINE_PGM_READ_ANY(signed char, byte);
|
|
|
|
#define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \
|
|
static const PROGMEM type array##_P[3] = \
|
|
{ X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \
|
|
static inline type array(int axis) \
|
|
{ return pgm_read_any(&array##_P[axis]); }
|
|
|
|
XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS);
|
|
XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS);
|
|
XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS);
|
|
XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
|
|
XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM);
|
|
XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
|
|
|
|
static void axis_is_at_home(int axis) {
|
|
current_position[axis] = base_home_pos(axis) + add_homeing[axis];
|
|
min_pos[axis] = base_min_pos(axis) + add_homeing[axis];
|
|
max_pos[axis] = base_max_pos(axis) + add_homeing[axis];
|
|
}
|
|
|
|
static void homeaxis(int axis) {
|
|
#define HOMEAXIS_DO(LETTER) \
|
|
((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
|
|
|
|
if (axis==X_AXIS ? HOMEAXIS_DO(X) :
|
|
axis==Y_AXIS ? HOMEAXIS_DO(Y) :
|
|
axis==Z_AXIS ? HOMEAXIS_DO(Z) :
|
|
0) {
|
|
current_position[axis] = 0;
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
destination[axis] = 1.5 * max_length(axis) * home_dir(axis);
|
|
feedrate = homing_feedrate[axis];
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
st_synchronize();
|
|
|
|
current_position[axis] = 0;
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
destination[axis] = -home_retract_mm(axis) * home_dir(axis);
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
st_synchronize();
|
|
|
|
destination[axis] = 2*home_retract_mm(axis) * home_dir(axis);
|
|
feedrate = homing_feedrate[axis]/2 ;
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
st_synchronize();
|
|
|
|
axis_is_at_home(axis);
|
|
destination[axis] = current_position[axis];
|
|
feedrate = 0.0;
|
|
endstops_hit_on_purpose();
|
|
}
|
|
}
|
|
#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
|
|
|
|
void process_commands()
|
|
{
|
|
unsigned long codenum; //throw away variable
|
|
char *starpos = NULL;
|
|
|
|
if(code_seen('G'))
|
|
{
|
|
switch((int)code_value())
|
|
{
|
|
case 0: // G0 -> G1
|
|
case 1: // G1
|
|
if(Stopped == false) {
|
|
get_coordinates(); // For X Y Z E F
|
|
prepare_move();
|
|
//ClearToSend();
|
|
return;
|
|
}
|
|
//break;
|
|
case 2: // G2 - CW ARC
|
|
if(Stopped == false) {
|
|
get_arc_coordinates();
|
|
prepare_arc_move(true);
|
|
return;
|
|
}
|
|
case 3: // G3 - CCW ARC
|
|
if(Stopped == false) {
|
|
get_arc_coordinates();
|
|
prepare_arc_move(false);
|
|
return;
|
|
}
|
|
case 4: // G4 dwell
|
|
LCD_MESSAGEPGM(MSG_DWELL);
|
|
codenum = 0;
|
|
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
|
|
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
|
|
|
|
st_synchronize();
|
|
codenum += millis(); // keep track of when we started waiting
|
|
previous_millis_cmd = millis();
|
|
while(millis() < codenum ){
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
}
|
|
break;
|
|
#ifdef FWRETRACT
|
|
case 10: // G10 retract
|
|
if(!retracted)
|
|
{
|
|
destination[X_AXIS]=current_position[X_AXIS];
|
|
destination[Y_AXIS]=current_position[Y_AXIS];
|
|
destination[Z_AXIS]=current_position[Z_AXIS];
|
|
current_position[Z_AXIS]+=-retract_zlift;
|
|
destination[E_AXIS]=current_position[E_AXIS]-retract_length;
|
|
feedrate=retract_feedrate;
|
|
retracted=true;
|
|
prepare_move();
|
|
}
|
|
|
|
break;
|
|
case 11: // G10 retract_recover
|
|
if(!retracted)
|
|
{
|
|
destination[X_AXIS]=current_position[X_AXIS];
|
|
destination[Y_AXIS]=current_position[Y_AXIS];
|
|
destination[Z_AXIS]=current_position[Z_AXIS];
|
|
|
|
current_position[Z_AXIS]+=retract_zlift;
|
|
current_position[E_AXIS]+=-retract_recover_length;
|
|
feedrate=retract_recover_feedrate;
|
|
retracted=false;
|
|
prepare_move();
|
|
}
|
|
break;
|
|
#endif //FWRETRACT
|
|
case 28: //G28 Home all Axis one at a time
|
|
saved_feedrate = feedrate;
|
|
saved_feedmultiply = feedmultiply;
|
|
feedmultiply = 100;
|
|
previous_millis_cmd = millis();
|
|
|
|
enable_endstops(true);
|
|
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
destination[i] = current_position[i];
|
|
}
|
|
feedrate = 0.0;
|
|
home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2])));
|
|
|
|
#if Z_HOME_DIR > 0 // If homing away from BED do Z first
|
|
if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
|
|
HOMEAXIS(Z);
|
|
}
|
|
#endif
|
|
|
|
#ifdef QUICK_HOME
|
|
if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) ) //first diagonal move
|
|
{
|
|
current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0;
|
|
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR;
|
|
feedrate = homing_feedrate[X_AXIS];
|
|
if(homing_feedrate[Y_AXIS]<feedrate)
|
|
feedrate =homing_feedrate[Y_AXIS];
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
st_synchronize();
|
|
|
|
axis_is_at_home(X_AXIS);
|
|
axis_is_at_home(Y_AXIS);
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
destination[X_AXIS] = current_position[X_AXIS];
|
|
destination[Y_AXIS] = current_position[Y_AXIS];
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
feedrate = 0.0;
|
|
st_synchronize();
|
|
endstops_hit_on_purpose();
|
|
}
|
|
#endif
|
|
|
|
if((home_all_axis) || (code_seen(axis_codes[X_AXIS])))
|
|
{
|
|
HOMEAXIS(X);
|
|
}
|
|
|
|
if((home_all_axis) || (code_seen(axis_codes[Y_AXIS]))) {
|
|
HOMEAXIS(Y);
|
|
}
|
|
|
|
#if Z_HOME_DIR < 0 // If homing towards BED do Z last
|
|
if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
|
|
HOMEAXIS(Z);
|
|
}
|
|
#endif
|
|
|
|
if(code_seen(axis_codes[X_AXIS]))
|
|
{
|
|
if(code_value_long() != 0) {
|
|
current_position[X_AXIS]=code_value()+add_homeing[0];
|
|
}
|
|
}
|
|
|
|
if(code_seen(axis_codes[Y_AXIS])) {
|
|
if(code_value_long() != 0) {
|
|
current_position[Y_AXIS]=code_value()+add_homeing[1];
|
|
}
|
|
}
|
|
|
|
if(code_seen(axis_codes[Z_AXIS])) {
|
|
if(code_value_long() != 0) {
|
|
current_position[Z_AXIS]=code_value()+add_homeing[2];
|
|
}
|
|
}
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
|
|
#ifdef ENDSTOPS_ONLY_FOR_HOMING
|
|
enable_endstops(false);
|
|
#endif
|
|
|
|
feedrate = saved_feedrate;
|
|
feedmultiply = saved_feedmultiply;
|
|
previous_millis_cmd = millis();
|
|
endstops_hit_on_purpose();
|
|
break;
|
|
case 90: // G90
|
|
relative_mode = false;
|
|
break;
|
|
case 91: // G91
|
|
relative_mode = true;
|
|
break;
|
|
case 92: // G92
|
|
if(!code_seen(axis_codes[E_AXIS]))
|
|
st_synchronize();
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
if(code_seen(axis_codes[i])) {
|
|
if(i == E_AXIS) {
|
|
current_position[i] = code_value();
|
|
plan_set_e_position(current_position[E_AXIS]);
|
|
}
|
|
else {
|
|
current_position[i] = code_value()+add_homeing[i];
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
else if(code_seen('M'))
|
|
{
|
|
switch( (int)code_value() )
|
|
{
|
|
#ifdef ULTIPANEL
|
|
case 0: // M0 - Unconditional stop - Wait for user button press on LCD
|
|
case 1: // M1 - Conditional stop - Wait for user button press on LCD
|
|
{
|
|
LCD_MESSAGEPGM(MSG_USERWAIT);
|
|
codenum = 0;
|
|
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
|
|
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
|
|
|
|
st_synchronize();
|
|
previous_millis_cmd = millis();
|
|
if (codenum > 0){
|
|
codenum += millis(); // keep track of when we started waiting
|
|
while(millis() < codenum && !LCD_CLICKED){
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
}
|
|
}else{
|
|
while(!LCD_CLICKED){
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
}
|
|
}
|
|
LCD_MESSAGEPGM(MSG_RESUMING);
|
|
}
|
|
break;
|
|
#endif
|
|
case 17:
|
|
LCD_MESSAGEPGM(MSG_NO_MOVE);
|
|
enable_x();
|
|
enable_y();
|
|
enable_z();
|
|
enable_e0();
|
|
enable_e1();
|
|
enable_e2();
|
|
break;
|
|
|
|
#ifdef SDSUPPORT
|
|
case 20: // M20 - list SD card
|
|
SERIAL_PROTOCOLLNPGM(MSG_BEGIN_FILE_LIST);
|
|
card.ls();
|
|
SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST);
|
|
break;
|
|
case 21: // M21 - init SD card
|
|
|
|
card.initsd();
|
|
|
|
break;
|
|
case 22: //M22 - release SD card
|
|
card.release();
|
|
|
|
break;
|
|
case 23: //M23 - Select file
|
|
starpos = (strchr(strchr_pointer + 4,'*'));
|
|
if(starpos!=NULL)
|
|
*(starpos-1)='\0';
|
|
card.openFile(strchr_pointer + 4,true);
|
|
break;
|
|
case 24: //M24 - Start SD print
|
|
card.startFileprint();
|
|
starttime=millis();
|
|
break;
|
|
case 25: //M25 - Pause SD print
|
|
card.pauseSDPrint();
|
|
break;
|
|
case 26: //M26 - Set SD index
|
|
if(card.cardOK && code_seen('S')) {
|
|
card.setIndex(code_value_long());
|
|
}
|
|
break;
|
|
case 27: //M27 - Get SD status
|
|
card.getStatus();
|
|
break;
|
|
case 28: //M28 - Start SD write
|
|
starpos = (strchr(strchr_pointer + 4,'*'));
|
|
if(starpos != NULL){
|
|
char* npos = strchr(cmdbuffer[bufindr], 'N');
|
|
strchr_pointer = strchr(npos,' ') + 1;
|
|
*(starpos-1) = '\0';
|
|
}
|
|
card.openFile(strchr_pointer+4,false);
|
|
break;
|
|
case 29: //M29 - Stop SD write
|
|
//processed in write to file routine above
|
|
//card,saving = false;
|
|
break;
|
|
case 30: //M30 <filename> Delete File
|
|
if (card.cardOK){
|
|
card.closefile();
|
|
starpos = (strchr(strchr_pointer + 4,'*'));
|
|
if(starpos != NULL){
|
|
char* npos = strchr(cmdbuffer[bufindr], 'N');
|
|
strchr_pointer = strchr(npos,' ') + 1;
|
|
*(starpos-1) = '\0';
|
|
}
|
|
card.removeFile(strchr_pointer + 4);
|
|
}
|
|
break;
|
|
case 928: //M928 - Start SD write
|
|
starpos = (strchr(strchr_pointer + 5,'*'));
|
|
if(starpos != NULL){
|
|
char* npos = strchr(cmdbuffer[bufindr], 'N');
|
|
strchr_pointer = strchr(npos,' ') + 1;
|
|
*(starpos-1) = '\0';
|
|
}
|
|
card.openLogFile(strchr_pointer+5);
|
|
break;
|
|
|
|
#endif //SDSUPPORT
|
|
|
|
case 31: //M31 take time since the start of the SD print or an M109 command
|
|
{
|
|
stoptime=millis();
|
|
char time[30];
|
|
unsigned long t=(stoptime-starttime)/1000;
|
|
int sec,min;
|
|
min=t/60;
|
|
sec=t%60;
|
|
sprintf_P(time, PSTR("%i min, %i sec"), min, sec);
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOLN(time);
|
|
lcd_setstatus(time);
|
|
autotempShutdown();
|
|
}
|
|
break;
|
|
case 42: //M42 -Change pin status via gcode
|
|
if (code_seen('S'))
|
|
{
|
|
int pin_status = code_value();
|
|
int pin_number = LED_PIN;
|
|
if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
|
|
pin_number = code_value();
|
|
for(int8_t i = 0; i < (int8_t)sizeof(sensitive_pins); i++)
|
|
{
|
|
if (sensitive_pins[i] == pin_number)
|
|
{
|
|
pin_number = -1;
|
|
break;
|
|
}
|
|
}
|
|
if (pin_number > -1)
|
|
{
|
|
pinMode(pin_number, OUTPUT);
|
|
digitalWrite(pin_number, pin_status);
|
|
analogWrite(pin_number, pin_status);
|
|
}
|
|
}
|
|
break;
|
|
case 104: // M104
|
|
if(setTargetedHotend(104)){
|
|
break;
|
|
}
|
|
if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder);
|
|
setWatch();
|
|
break;
|
|
case 140: // M140 set bed temp
|
|
if (code_seen('S')) setTargetBed(code_value());
|
|
break;
|
|
case 105 : // M105
|
|
if(setTargetedHotend(105)){
|
|
break;
|
|
}
|
|
#if (TEMP_0_PIN > -1)
|
|
SERIAL_PROTOCOLPGM("ok T:");
|
|
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
|
|
SERIAL_PROTOCOLPGM(" /");
|
|
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
|
|
#if TEMP_BED_PIN > -1
|
|
SERIAL_PROTOCOLPGM(" B:");
|
|
SERIAL_PROTOCOL_F(degBed(),1);
|
|
SERIAL_PROTOCOLPGM(" /");
|
|
SERIAL_PROTOCOL_F(degTargetBed(),1);
|
|
#endif //TEMP_BED_PIN
|
|
#else
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
|
|
#endif
|
|
|
|
SERIAL_PROTOCOLPGM(" @:");
|
|
SERIAL_PROTOCOL(getHeaterPower(tmp_extruder));
|
|
|
|
SERIAL_PROTOCOLPGM(" B@:");
|
|
SERIAL_PROTOCOL(getHeaterPower(-1));
|
|
|
|
SERIAL_PROTOCOLLN("");
|
|
return;
|
|
break;
|
|
case 109:
|
|
{// M109 - Wait for extruder heater to reach target.
|
|
if(setTargetedHotend(109)){
|
|
break;
|
|
}
|
|
LCD_MESSAGEPGM(MSG_HEATING);
|
|
#ifdef AUTOTEMP
|
|
autotemp_enabled=false;
|
|
#endif
|
|
if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder);
|
|
#ifdef AUTOTEMP
|
|
if (code_seen('S')) autotemp_min=code_value();
|
|
if (code_seen('B')) autotemp_max=code_value();
|
|
if (code_seen('F'))
|
|
{
|
|
autotemp_factor=code_value();
|
|
autotemp_enabled=true;
|
|
}
|
|
#endif
|
|
|
|
setWatch();
|
|
codenum = millis();
|
|
|
|
/* See if we are heating up or cooling down */
|
|
bool target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling
|
|
|
|
#ifdef TEMP_RESIDENCY_TIME
|
|
long residencyStart;
|
|
residencyStart = -1;
|
|
/* continue to loop until we have reached the target temp
|
|
_and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */
|
|
while((residencyStart == -1) ||
|
|
(residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL))) ) {
|
|
#else
|
|
while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) {
|
|
#endif //TEMP_RESIDENCY_TIME
|
|
if( (millis() - codenum) > 1000UL )
|
|
{ //Print Temp Reading and remaining time every 1 second while heating up/cooling down
|
|
SERIAL_PROTOCOLPGM("T:");
|
|
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
|
|
SERIAL_PROTOCOLPGM(" E:");
|
|
SERIAL_PROTOCOL((int)tmp_extruder);
|
|
#ifdef TEMP_RESIDENCY_TIME
|
|
SERIAL_PROTOCOLPGM(" W:");
|
|
if(residencyStart > -1)
|
|
{
|
|
codenum = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residencyStart)) / 1000UL;
|
|
SERIAL_PROTOCOLLN( codenum );
|
|
}
|
|
else
|
|
{
|
|
SERIAL_PROTOCOLLN( "?" );
|
|
}
|
|
#else
|
|
SERIAL_PROTOCOLLN("");
|
|
#endif
|
|
codenum = millis();
|
|
}
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
#ifdef TEMP_RESIDENCY_TIME
|
|
/* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
|
|
or when current temp falls outside the hysteresis after target temp was reached */
|
|
if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) ||
|
|
(residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) ||
|
|
(residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) )
|
|
{
|
|
residencyStart = millis();
|
|
}
|
|
#endif //TEMP_RESIDENCY_TIME
|
|
}
|
|
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
|
|
starttime=millis();
|
|
previous_millis_cmd = millis();
|
|
}
|
|
break;
|
|
case 190: // M190 - Wait for bed heater to reach target.
|
|
#if TEMP_BED_PIN > -1
|
|
LCD_MESSAGEPGM(MSG_BED_HEATING);
|
|
if (code_seen('S')) setTargetBed(code_value());
|
|
codenum = millis();
|
|
while(isHeatingBed())
|
|
{
|
|
if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up.
|
|
{
|
|
float tt=degHotend(active_extruder);
|
|
SERIAL_PROTOCOLPGM("T:");
|
|
SERIAL_PROTOCOL(tt);
|
|
SERIAL_PROTOCOLPGM(" E:");
|
|
SERIAL_PROTOCOL((int)active_extruder);
|
|
SERIAL_PROTOCOLPGM(" B:");
|
|
SERIAL_PROTOCOL_F(degBed(),1);
|
|
SERIAL_PROTOCOLLN("");
|
|
codenum = millis();
|
|
}
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
}
|
|
LCD_MESSAGEPGM(MSG_BED_DONE);
|
|
previous_millis_cmd = millis();
|
|
#endif
|
|
break;
|
|
|
|
#if FAN_PIN > -1
|
|
case 106: //M106 Fan On
|
|
if (code_seen('S')){
|
|
fanSpeed=constrain(code_value(),0,255);
|
|
}
|
|
else {
|
|
fanSpeed=255;
|
|
}
|
|
break;
|
|
case 107: //M107 Fan Off
|
|
fanSpeed = 0;
|
|
break;
|
|
#endif //FAN_PIN
|
|
|
|
#if (PS_ON_PIN > -1)
|
|
case 80: // M80 - ATX Power On
|
|
SET_OUTPUT(PS_ON_PIN); //GND
|
|
WRITE(PS_ON_PIN, PS_ON_AWAKE);
|
|
break;
|
|
#endif
|
|
|
|
case 81: // M81 - ATX Power Off
|
|
|
|
#if defined SUICIDE_PIN && SUICIDE_PIN > -1
|
|
st_synchronize();
|
|
suicide();
|
|
#elif (PS_ON_PIN > -1)
|
|
SET_OUTPUT(PS_ON_PIN);
|
|
WRITE(PS_ON_PIN, PS_ON_ASLEEP);
|
|
#endif
|
|
break;
|
|
|
|
case 82:
|
|
axis_relative_modes[3] = false;
|
|
break;
|
|
case 83:
|
|
axis_relative_modes[3] = true;
|
|
break;
|
|
case 18: //compatibility
|
|
case 84: // M84
|
|
if(code_seen('S')){
|
|
stepper_inactive_time = code_value() * 1000;
|
|
}
|
|
else
|
|
{
|
|
bool all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))|| (code_seen(axis_codes[3])));
|
|
if(all_axis)
|
|
{
|
|
st_synchronize();
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
finishAndDisableSteppers();
|
|
}
|
|
else
|
|
{
|
|
st_synchronize();
|
|
if(code_seen('X')) disable_x();
|
|
if(code_seen('Y')) disable_y();
|
|
if(code_seen('Z')) disable_z();
|
|
#if ((E0_ENABLE_PIN != X_ENABLE_PIN) && (E1_ENABLE_PIN != Y_ENABLE_PIN)) // Only enable on boards that have seperate ENABLE_PINS
|
|
if(code_seen('E')) {
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
break;
|
|
case 85: // M85
|
|
code_seen('S');
|
|
max_inactive_time = code_value() * 1000;
|
|
break;
|
|
case 92: // M92
|
|
for(int8_t i=0; i < NUM_AXIS; i++)
|
|
{
|
|
if(code_seen(axis_codes[i]))
|
|
{
|
|
if(i == 3) { // E
|
|
float value = code_value();
|
|
if(value < 20.0) {
|
|
float factor = axis_steps_per_unit[i] / value; // increase e constants if M92 E14 is given for netfab.
|
|
max_e_jerk *= factor;
|
|
max_feedrate[i] *= factor;
|
|
axis_steps_per_sqr_second[i] *= factor;
|
|
}
|
|
axis_steps_per_unit[i] = value;
|
|
}
|
|
else {
|
|
axis_steps_per_unit[i] = code_value();
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case 115: // M115
|
|
SERIAL_PROTOCOLPGM(MSG_M115_REPORT);
|
|
break;
|
|
case 117: // M117 display message
|
|
starpos = (strchr(strchr_pointer + 5,'*'));
|
|
if(starpos!=NULL)
|
|
*(starpos-1)='\0';
|
|
lcd_setstatus(strchr_pointer + 5);
|
|
break;
|
|
case 114: // M114
|
|
SERIAL_PROTOCOLPGM("X:");
|
|
SERIAL_PROTOCOL(current_position[X_AXIS]);
|
|
SERIAL_PROTOCOLPGM("Y:");
|
|
SERIAL_PROTOCOL(current_position[Y_AXIS]);
|
|
SERIAL_PROTOCOLPGM("Z:");
|
|
SERIAL_PROTOCOL(current_position[Z_AXIS]);
|
|
SERIAL_PROTOCOLPGM("E:");
|
|
SERIAL_PROTOCOL(current_position[E_AXIS]);
|
|
|
|
SERIAL_PROTOCOLPGM(MSG_COUNT_X);
|
|
SERIAL_PROTOCOL(float(st_get_position(X_AXIS))/axis_steps_per_unit[X_AXIS]);
|
|
SERIAL_PROTOCOLPGM("Y:");
|
|
SERIAL_PROTOCOL(float(st_get_position(Y_AXIS))/axis_steps_per_unit[Y_AXIS]);
|
|
SERIAL_PROTOCOLPGM("Z:");
|
|
SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]);
|
|
|
|
SERIAL_PROTOCOLLN("");
|
|
break;
|
|
case 120: // M120
|
|
enable_endstops(false) ;
|
|
break;
|
|
case 121: // M121
|
|
enable_endstops(true) ;
|
|
break;
|
|
case 119: // M119
|
|
SERIAL_PROTOCOLLN(MSG_M119_REPORT);
|
|
#if (X_MIN_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_X_MIN);
|
|
SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
#if (X_MAX_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_X_MAX);
|
|
SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
#if (Y_MIN_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_Y_MIN);
|
|
SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
#if (Y_MAX_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_Y_MAX);
|
|
SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
#if (Z_MIN_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_Z_MIN);
|
|
SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
#if (Z_MAX_PIN > -1)
|
|
SERIAL_PROTOCOLPGM(MSG_Z_MAX);
|
|
SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
|
|
#endif
|
|
break;
|
|
//TODO: update for all axis, use for loop
|
|
case 201: // M201
|
|
for(int8_t i=0; i < NUM_AXIS; i++)
|
|
{
|
|
if(code_seen(axis_codes[i]))
|
|
{
|
|
max_acceleration_units_per_sq_second[i] = code_value();
|
|
axis_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i];
|
|
}
|
|
}
|
|
break;
|
|
#if 0 // Not used for Sprinter/grbl gen6
|
|
case 202: // M202
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
if(code_seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = code_value() * axis_steps_per_unit[i];
|
|
}
|
|
break;
|
|
#endif
|
|
case 203: // M203 max feedrate mm/sec
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
if(code_seen(axis_codes[i])) max_feedrate[i] = code_value();
|
|
}
|
|
break;
|
|
case 204: // M204 acclereration S normal moves T filmanent only moves
|
|
{
|
|
if(code_seen('S')) acceleration = code_value() ;
|
|
if(code_seen('T')) retract_acceleration = code_value() ;
|
|
}
|
|
break;
|
|
case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk
|
|
{
|
|
if(code_seen('S')) minimumfeedrate = code_value();
|
|
if(code_seen('T')) mintravelfeedrate = code_value();
|
|
if(code_seen('B')) minsegmenttime = code_value() ;
|
|
if(code_seen('X')) max_xy_jerk = code_value() ;
|
|
if(code_seen('Z')) max_z_jerk = code_value() ;
|
|
if(code_seen('E')) max_e_jerk = code_value() ;
|
|
}
|
|
break;
|
|
case 206: // M206 additional homeing offset
|
|
for(int8_t i=0; i < 3; i++)
|
|
{
|
|
if(code_seen(axis_codes[i])) add_homeing[i] = code_value();
|
|
}
|
|
break;
|
|
#ifdef FWRETRACT
|
|
case 207: //M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop]
|
|
{
|
|
if(code_seen('S'))
|
|
{
|
|
retract_length = code_value() ;
|
|
}
|
|
if(code_seen('F'))
|
|
{
|
|
retract_feedrate = code_value() ;
|
|
}
|
|
if(code_seen('Z'))
|
|
{
|
|
retract_zlift = code_value() ;
|
|
}
|
|
}break;
|
|
case 208: // M208 - set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
|
|
{
|
|
if(code_seen('S'))
|
|
{
|
|
retract_recover_length = code_value() ;
|
|
}
|
|
if(code_seen('F'))
|
|
{
|
|
retract_recover_feedrate = code_value() ;
|
|
}
|
|
}break;
|
|
case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
|
|
{
|
|
if(code_seen('S'))
|
|
{
|
|
int t= code_value() ;
|
|
switch(t)
|
|
{
|
|
case 0: autoretract_enabled=false;retracted=false;break;
|
|
case 1: autoretract_enabled=true;retracted=false;break;
|
|
default:
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND);
|
|
SERIAL_ECHO(cmdbuffer[bufindr]);
|
|
SERIAL_ECHOLNPGM("\"");
|
|
}
|
|
}
|
|
|
|
}break;
|
|
#endif // FWRETRACT
|
|
#if EXTRUDERS > 1
|
|
case 218: // M218 - set hotend offset (in mm), T<extruder_number> X<offset_on_X> Y<offset_on_Y>
|
|
{
|
|
if(setTargetedHotend(218)){
|
|
break;
|
|
}
|
|
if(code_seen('X'))
|
|
{
|
|
extruder_offset[X_AXIS][tmp_extruder] = code_value();
|
|
}
|
|
if(code_seen('Y'))
|
|
{
|
|
extruder_offset[Y_AXIS][tmp_extruder] = code_value();
|
|
}
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
|
|
for(tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++)
|
|
{
|
|
SERIAL_ECHO(" ");
|
|
SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]);
|
|
SERIAL_ECHO(",");
|
|
SERIAL_ECHO(extruder_offset[Y_AXIS][tmp_extruder]);
|
|
}
|
|
SERIAL_ECHOLN("");
|
|
}break;
|
|
#endif
|
|
case 220: // M220 S<factor in percent>- set speed factor override percentage
|
|
{
|
|
if(code_seen('S'))
|
|
{
|
|
feedmultiply = code_value() ;
|
|
}
|
|
}
|
|
break;
|
|
case 221: // M221 S<factor in percent>- set extrude factor override percentage
|
|
{
|
|
if(code_seen('S'))
|
|
{
|
|
extrudemultiply = code_value() ;
|
|
}
|
|
}
|
|
break;
|
|
|
|
#if defined(LARGE_FLASH) && LARGE_FLASH == true && defined(BEEPER) && BEEPER > -1
|
|
case 300: // M300
|
|
{
|
|
int beepS = 1;
|
|
int beepP = 1000;
|
|
if(code_seen('S')) beepS = code_value();
|
|
if(code_seen('P')) beepP = code_value();
|
|
tone(BEEPER, beepS);
|
|
delay(beepP);
|
|
noTone(BEEPER);
|
|
}
|
|
break;
|
|
#endif // M300
|
|
|
|
#ifdef PIDTEMP
|
|
case 301: // M301
|
|
{
|
|
if(code_seen('P')) Kp = code_value();
|
|
if(code_seen('I')) Ki = code_value()*PID_dT;
|
|
if(code_seen('D')) Kd = code_value()/PID_dT;
|
|
#ifdef PID_ADD_EXTRUSION_RATE
|
|
if(code_seen('C')) Kc = code_value();
|
|
#endif
|
|
updatePID();
|
|
SERIAL_PROTOCOL(MSG_OK);
|
|
SERIAL_PROTOCOL(" p:");
|
|
SERIAL_PROTOCOL(Kp);
|
|
SERIAL_PROTOCOL(" i:");
|
|
SERIAL_PROTOCOL(Ki/PID_dT);
|
|
SERIAL_PROTOCOL(" d:");
|
|
SERIAL_PROTOCOL(Kd*PID_dT);
|
|
#ifdef PID_ADD_EXTRUSION_RATE
|
|
SERIAL_PROTOCOL(" c:");
|
|
SERIAL_PROTOCOL(Kc*PID_dT);
|
|
#endif
|
|
SERIAL_PROTOCOLLN("");
|
|
}
|
|
break;
|
|
#endif //PIDTEMP
|
|
#ifdef PIDTEMPBED
|
|
case 304: // M304
|
|
{
|
|
if(code_seen('P')) bedKp = code_value();
|
|
if(code_seen('I')) bedKi = code_value()*PID_dT;
|
|
if(code_seen('D')) bedKd = code_value()/PID_dT;
|
|
updatePID();
|
|
SERIAL_PROTOCOL(MSG_OK);
|
|
SERIAL_PROTOCOL(" p:");
|
|
SERIAL_PROTOCOL(bedKp);
|
|
SERIAL_PROTOCOL(" i:");
|
|
SERIAL_PROTOCOL(bedKi/PID_dT);
|
|
SERIAL_PROTOCOL(" d:");
|
|
SERIAL_PROTOCOL(bedKd*PID_dT);
|
|
SERIAL_PROTOCOLLN("");
|
|
}
|
|
break;
|
|
#endif //PIDTEMP
|
|
case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
|
|
{
|
|
#ifdef PHOTOGRAPH_PIN
|
|
#if (PHOTOGRAPH_PIN > -1)
|
|
const uint8_t NUM_PULSES=16;
|
|
const float PULSE_LENGTH=0.01524;
|
|
for(int i=0; i < NUM_PULSES; i++) {
|
|
WRITE(PHOTOGRAPH_PIN, HIGH);
|
|
_delay_ms(PULSE_LENGTH);
|
|
WRITE(PHOTOGRAPH_PIN, LOW);
|
|
_delay_ms(PULSE_LENGTH);
|
|
}
|
|
delay(7.33);
|
|
for(int i=0; i < NUM_PULSES; i++) {
|
|
WRITE(PHOTOGRAPH_PIN, HIGH);
|
|
_delay_ms(PULSE_LENGTH);
|
|
WRITE(PHOTOGRAPH_PIN, LOW);
|
|
_delay_ms(PULSE_LENGTH);
|
|
}
|
|
#endif
|
|
#endif
|
|
}
|
|
break;
|
|
|
|
case 302: // allow cold extrudes
|
|
{
|
|
allow_cold_extrudes(true);
|
|
}
|
|
break;
|
|
case 303: // M303 PID autotune
|
|
{
|
|
float temp = 150.0;
|
|
int e=0;
|
|
int c=5;
|
|
if (code_seen('E')) e=code_value();
|
|
if (e<0)
|
|
temp=70;
|
|
if (code_seen('S')) temp=code_value();
|
|
if (code_seen('C')) c=code_value();
|
|
PID_autotune(temp, e, c);
|
|
}
|
|
break;
|
|
case 400: // M400 finish all moves
|
|
{
|
|
st_synchronize();
|
|
}
|
|
break;
|
|
case 500: // M500 Store settings in EEPROM
|
|
{
|
|
Config_StoreSettings();
|
|
}
|
|
break;
|
|
case 501: // M501 Read settings from EEPROM
|
|
{
|
|
Config_RetrieveSettings();
|
|
}
|
|
break;
|
|
case 502: // M502 Revert to default settings
|
|
{
|
|
Config_ResetDefault();
|
|
}
|
|
break;
|
|
case 503: // M503 print settings currently in memory
|
|
{
|
|
Config_PrintSettings();
|
|
}
|
|
break;
|
|
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
|
case 540:
|
|
{
|
|
if(code_seen('S')) abort_on_endstop_hit = code_value() > 0;
|
|
}
|
|
break;
|
|
#endif
|
|
#ifdef FILAMENTCHANGEENABLE
|
|
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
|
|
{
|
|
float target[4];
|
|
float lastpos[4];
|
|
target[X_AXIS]=current_position[X_AXIS];
|
|
target[Y_AXIS]=current_position[Y_AXIS];
|
|
target[Z_AXIS]=current_position[Z_AXIS];
|
|
target[E_AXIS]=current_position[E_AXIS];
|
|
lastpos[X_AXIS]=current_position[X_AXIS];
|
|
lastpos[Y_AXIS]=current_position[Y_AXIS];
|
|
lastpos[Z_AXIS]=current_position[Z_AXIS];
|
|
lastpos[E_AXIS]=current_position[E_AXIS];
|
|
//retract by E
|
|
if(code_seen('E'))
|
|
{
|
|
target[E_AXIS]+= code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_FIRSTRETRACT
|
|
target[E_AXIS]+= FILAMENTCHANGE_FIRSTRETRACT ;
|
|
#endif
|
|
}
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
|
|
|
|
//lift Z
|
|
if(code_seen('Z'))
|
|
{
|
|
target[Z_AXIS]+= code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_ZADD
|
|
target[Z_AXIS]+= FILAMENTCHANGE_ZADD ;
|
|
#endif
|
|
}
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
|
|
|
|
//move xy
|
|
if(code_seen('X'))
|
|
{
|
|
target[X_AXIS]+= code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_XPOS
|
|
target[X_AXIS]= FILAMENTCHANGE_XPOS ;
|
|
#endif
|
|
}
|
|
if(code_seen('Y'))
|
|
{
|
|
target[Y_AXIS]= code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_YPOS
|
|
target[Y_AXIS]= FILAMENTCHANGE_YPOS ;
|
|
#endif
|
|
}
|
|
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
|
|
|
|
if(code_seen('L'))
|
|
{
|
|
target[E_AXIS]+= code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_FINALRETRACT
|
|
target[E_AXIS]+= FILAMENTCHANGE_FINALRETRACT ;
|
|
#endif
|
|
}
|
|
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
|
|
|
|
//finish moves
|
|
st_synchronize();
|
|
//disable extruder steppers so filament can be removed
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
delay(100);
|
|
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
|
|
uint8_t cnt=0;
|
|
while(!LCD_CLICKED){
|
|
cnt++;
|
|
manage_heater();
|
|
manage_inactivity();
|
|
lcd_update();
|
|
|
|
#if BEEPER > -1
|
|
if(cnt==0)
|
|
{
|
|
SET_OUTPUT(BEEPER);
|
|
|
|
WRITE(BEEPER,HIGH);
|
|
delay(3);
|
|
WRITE(BEEPER,LOW);
|
|
delay(3);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
//return to normal
|
|
if(code_seen('L'))
|
|
{
|
|
target[E_AXIS]+= -code_value();
|
|
}
|
|
else
|
|
{
|
|
#ifdef FILAMENTCHANGE_FINALRETRACT
|
|
target[E_AXIS]+=(-1)*FILAMENTCHANGE_FINALRETRACT ;
|
|
#endif
|
|
}
|
|
current_position[E_AXIS]=target[E_AXIS]; //the long retract of L is compensated by manual filament feeding
|
|
plan_set_e_position(current_position[E_AXIS]);
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); //should do nothing
|
|
plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); //move xy back
|
|
plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); //move z back
|
|
plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], lastpos[E_AXIS], feedrate/60, active_extruder); //final untretract
|
|
}
|
|
break;
|
|
#endif //FILAMENTCHANGEENABLE
|
|
case 907: // M907 Set digital trimpot motor current using axis codes.
|
|
{
|
|
#if DIGIPOTSS_PIN > -1
|
|
for(int i=0;i<=NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_current(i,code_value());
|
|
if(code_seen('B')) digipot_current(4,code_value());
|
|
if(code_seen('S')) for(int i=0;i<=4;i++) digipot_current(i,code_value());
|
|
#endif
|
|
}
|
|
case 908: // M908 Control digital trimpot directly.
|
|
{
|
|
#if DIGIPOTSS_PIN > -1
|
|
uint8_t channel,current;
|
|
if(code_seen('P')) channel=code_value();
|
|
if(code_seen('S')) current=code_value();
|
|
digitalPotWrite(channel, current);
|
|
#endif
|
|
}
|
|
break;
|
|
case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
|
|
{
|
|
#if X_MS1_PIN > -1
|
|
if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value());
|
|
for(int i=0;i<=NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value());
|
|
if(code_seen('B')) microstep_mode(4,code_value());
|
|
microstep_readings();
|
|
#endif
|
|
}
|
|
break;
|
|
case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
|
|
{
|
|
#if X_MS1_PIN > -1
|
|
if(code_seen('S')) switch((int)code_value())
|
|
{
|
|
case 1:
|
|
for(int i=0;i<=NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_ms(i,code_value(),-1);
|
|
if(code_seen('B')) microstep_ms(4,code_value(),-1);
|
|
break;
|
|
case 2:
|
|
for(int i=0;i<=NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_ms(i,-1,code_value());
|
|
if(code_seen('B')) microstep_ms(4,-1,code_value());
|
|
break;
|
|
}
|
|
microstep_readings();
|
|
#endif
|
|
}
|
|
break;
|
|
case 999: // M999: Restart after being stopped
|
|
Stopped = false;
|
|
lcd_reset_alert_level();
|
|
gcode_LastN = Stopped_gcode_LastN;
|
|
FlushSerialRequestResend();
|
|
break;
|
|
}
|
|
}
|
|
|
|
else if(code_seen('T'))
|
|
{
|
|
tmp_extruder = code_value();
|
|
if(tmp_extruder >= EXTRUDERS) {
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHO("T");
|
|
SERIAL_ECHO(tmp_extruder);
|
|
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
|
|
}
|
|
else {
|
|
boolean make_move = false;
|
|
if(code_seen('F')) {
|
|
make_move = true;
|
|
next_feedrate = code_value();
|
|
if(next_feedrate > 0.0) {
|
|
feedrate = next_feedrate;
|
|
}
|
|
}
|
|
#if EXTRUDERS > 1
|
|
if(tmp_extruder != active_extruder) {
|
|
// Save current position to return to after applying extruder offset
|
|
memcpy(destination, current_position, sizeof(destination));
|
|
// Offset extruder (only by XY)
|
|
int i;
|
|
for(i = 0; i < 2; i++) {
|
|
current_position[i] = current_position[i] -
|
|
extruder_offset[i][active_extruder] +
|
|
extruder_offset[i][tmp_extruder];
|
|
}
|
|
// Set the new active extruder and position
|
|
active_extruder = tmp_extruder;
|
|
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
|
|
// Move to the old position if 'F' was in the parameters
|
|
if(make_move && Stopped == false) {
|
|
prepare_move();
|
|
}
|
|
}
|
|
#endif
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHO(MSG_ACTIVE_EXTRUDER);
|
|
SERIAL_PROTOCOLLN((int)active_extruder);
|
|
}
|
|
}
|
|
|
|
else
|
|
{
|
|
SERIAL_ECHO_START;
|
|
SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND);
|
|
SERIAL_ECHO(cmdbuffer[bufindr]);
|
|
SERIAL_ECHOLNPGM("\"");
|
|
}
|
|
|
|
ClearToSend();
|
|
}
|
|
|
|
void FlushSerialRequestResend()
|
|
{
|
|
//char cmdbuffer[bufindr][100]="Resend:";
|
|
MYSERIAL.flush();
|
|
SERIAL_PROTOCOLPGM(MSG_RESEND);
|
|
SERIAL_PROTOCOLLN(gcode_LastN + 1);
|
|
ClearToSend();
|
|
}
|
|
|
|
void ClearToSend()
|
|
{
|
|
previous_millis_cmd = millis();
|
|
#ifdef SDSUPPORT
|
|
if(fromsd[bufindr])
|
|
return;
|
|
#endif //SDSUPPORT
|
|
SERIAL_PROTOCOLLNPGM(MSG_OK);
|
|
}
|
|
|
|
void get_coordinates()
|
|
{
|
|
bool seen[4]={false,false,false,false};
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
if(code_seen(axis_codes[i]))
|
|
{
|
|
destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i];
|
|
seen[i]=true;
|
|
}
|
|
else destination[i] = current_position[i]; //Are these else lines really needed?
|
|
}
|
|
if(code_seen('F')) {
|
|
next_feedrate = code_value();
|
|
if(next_feedrate > 0.0) feedrate = next_feedrate;
|
|
}
|
|
#ifdef FWRETRACT
|
|
if(autoretract_enabled)
|
|
if( !(seen[X_AXIS] || seen[Y_AXIS] || seen[Z_AXIS]) && seen[E_AXIS])
|
|
{
|
|
float echange=destination[E_AXIS]-current_position[E_AXIS];
|
|
if(echange<-MIN_RETRACT) //retract
|
|
{
|
|
if(!retracted)
|
|
{
|
|
|
|
destination[Z_AXIS]+=retract_zlift; //not sure why chaninging current_position negatively does not work.
|
|
//if slicer retracted by echange=-1mm and you want to retract 3mm, corrrectede=-2mm additionally
|
|
float correctede=-echange-retract_length;
|
|
//to generate the additional steps, not the destination is changed, but inversely the current position
|
|
current_position[E_AXIS]+=-correctede;
|
|
feedrate=retract_feedrate;
|
|
retracted=true;
|
|
}
|
|
|
|
}
|
|
else
|
|
if(echange>MIN_RETRACT) //retract_recover
|
|
{
|
|
if(retracted)
|
|
{
|
|
//current_position[Z_AXIS]+=-retract_zlift;
|
|
//if slicer retracted_recovered by echange=+1mm and you want to retract_recover 3mm, corrrectede=2mm additionally
|
|
float correctede=-echange+1*retract_length+retract_recover_length; //total unretract=retract_length+retract_recover_length[surplus]
|
|
current_position[E_AXIS]+=correctede; //to generate the additional steps, not the destination is changed, but inversely the current position
|
|
feedrate=retract_recover_feedrate;
|
|
retracted=false;
|
|
}
|
|
}
|
|
|
|
}
|
|
#endif //FWRETRACT
|
|
}
|
|
|
|
void get_arc_coordinates()
|
|
{
|
|
#ifdef SF_ARC_FIX
|
|
bool relative_mode_backup = relative_mode;
|
|
relative_mode = true;
|
|
#endif
|
|
get_coordinates();
|
|
#ifdef SF_ARC_FIX
|
|
relative_mode=relative_mode_backup;
|
|
#endif
|
|
|
|
if(code_seen('I')) {
|
|
offset[0] = code_value();
|
|
}
|
|
else {
|
|
offset[0] = 0.0;
|
|
}
|
|
if(code_seen('J')) {
|
|
offset[1] = code_value();
|
|
}
|
|
else {
|
|
offset[1] = 0.0;
|
|
}
|
|
}
|
|
|
|
void clamp_to_software_endstops(float target[3])
|
|
{
|
|
if (min_software_endstops) {
|
|
if (target[X_AXIS] < min_pos[X_AXIS]) target[X_AXIS] = min_pos[X_AXIS];
|
|
if (target[Y_AXIS] < min_pos[Y_AXIS]) target[Y_AXIS] = min_pos[Y_AXIS];
|
|
if (target[Z_AXIS] < min_pos[Z_AXIS]) target[Z_AXIS] = min_pos[Z_AXIS];
|
|
}
|
|
|
|
if (max_software_endstops) {
|
|
if (target[X_AXIS] > max_pos[X_AXIS]) target[X_AXIS] = max_pos[X_AXIS];
|
|
if (target[Y_AXIS] > max_pos[Y_AXIS]) target[Y_AXIS] = max_pos[Y_AXIS];
|
|
if (target[Z_AXIS] > max_pos[Z_AXIS]) target[Z_AXIS] = max_pos[Z_AXIS];
|
|
}
|
|
}
|
|
|
|
void prepare_move()
|
|
{
|
|
clamp_to_software_endstops(destination);
|
|
|
|
previous_millis_cmd = millis();
|
|
// Do not use feedmultiply for E or Z only moves
|
|
if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) {
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
|
|
}
|
|
else {
|
|
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
|
|
}
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
current_position[i] = destination[i];
|
|
}
|
|
}
|
|
|
|
void prepare_arc_move(char isclockwise) {
|
|
float r = hypot(offset[X_AXIS], offset[Y_AXIS]); // Compute arc radius for mc_arc
|
|
|
|
// Trace the arc
|
|
mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder);
|
|
|
|
// As far as the parser is concerned, the position is now == target. In reality the
|
|
// motion control system might still be processing the action and the real tool position
|
|
// in any intermediate location.
|
|
for(int8_t i=0; i < NUM_AXIS; i++) {
|
|
current_position[i] = destination[i];
|
|
}
|
|
previous_millis_cmd = millis();
|
|
}
|
|
|
|
#ifdef CONTROLLERFAN_PIN
|
|
unsigned long lastMotor = 0; //Save the time for when a motor was turned on last
|
|
unsigned long lastMotorCheck = 0;
|
|
|
|
void controllerFan()
|
|
{
|
|
if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
|
|
{
|
|
lastMotorCheck = millis();
|
|
|
|
if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN)
|
|
#if EXTRUDERS > 2
|
|
|| !READ(E2_ENABLE_PIN)
|
|
#endif
|
|
#if EXTRUDER > 1
|
|
|| !READ(E2_ENABLE_PIN)
|
|
#endif
|
|
|| !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled...
|
|
{
|
|
lastMotor = millis(); //... set time to NOW so the fan will turn on
|
|
}
|
|
|
|
if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
|
|
{
|
|
WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off
|
|
}
|
|
else
|
|
{
|
|
WRITE(CONTROLLERFAN_PIN, HIGH); //... turn the fan on
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef EXTRUDERFAN_PIN
|
|
unsigned long lastExtruderCheck = 0;
|
|
|
|
void extruderFan()
|
|
{
|
|
if ((millis() - lastExtruderCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
|
|
{
|
|
lastExtruderCheck = millis();
|
|
|
|
if (degHotend(active_extruder) < EXTRUDERFAN_DEC)
|
|
{
|
|
WRITE(EXTRUDERFAN_PIN, LOW); //... turn the fan off
|
|
}
|
|
else
|
|
{
|
|
WRITE(EXTRUDERFAN_PIN, HIGH); //... turn the fan on
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void manage_inactivity()
|
|
{
|
|
if( (millis() - previous_millis_cmd) > max_inactive_time )
|
|
if(max_inactive_time)
|
|
kill();
|
|
if(stepper_inactive_time) {
|
|
if( (millis() - previous_millis_cmd) > stepper_inactive_time )
|
|
{
|
|
if(blocks_queued() == false) {
|
|
disable_x();
|
|
disable_y();
|
|
disable_z();
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
}
|
|
}
|
|
}
|
|
#if( KILL_PIN>-1 )
|
|
if( 0 == READ(KILL_PIN) )
|
|
kill();
|
|
#endif
|
|
#ifdef CONTROLLERFAN_PIN
|
|
controllerFan(); //Check if fan should be turned on to cool stepper drivers down
|
|
#endif
|
|
#ifdef EXTRUDER_RUNOUT_PREVENT
|
|
if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 )
|
|
if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP)
|
|
{
|
|
bool oldstatus=READ(E0_ENABLE_PIN);
|
|
enable_e0();
|
|
float oldepos=current_position[E_AXIS];
|
|
float oldedes=destination[E_AXIS];
|
|
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
|
|
current_position[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS],
|
|
EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], active_extruder);
|
|
current_position[E_AXIS]=oldepos;
|
|
destination[E_AXIS]=oldedes;
|
|
plan_set_e_position(oldepos);
|
|
previous_millis_cmd=millis();
|
|
st_synchronize();
|
|
WRITE(E0_ENABLE_PIN,oldstatus);
|
|
}
|
|
#endif
|
|
check_axes_activity();
|
|
}
|
|
|
|
void kill()
|
|
{
|
|
cli(); // Stop interrupts
|
|
disable_heater();
|
|
|
|
disable_x();
|
|
disable_y();
|
|
disable_z();
|
|
disable_e0();
|
|
disable_e1();
|
|
disable_e2();
|
|
|
|
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
|
|
LCD_ALERTMESSAGEPGM(MSG_KILLED);
|
|
suicide();
|
|
while(1) { /* Intentionally left empty */ } // Wait for reset
|
|
}
|
|
|
|
void Stop()
|
|
{
|
|
disable_heater();
|
|
if(Stopped == false) {
|
|
Stopped = true;
|
|
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
|
|
SERIAL_ERROR_START;
|
|
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
|
|
LCD_MESSAGEPGM(MSG_STOPPED);
|
|
}
|
|
}
|
|
|
|
bool IsStopped() { return Stopped; };
|
|
|
|
#ifdef FAST_PWM_FAN
|
|
void setPwmFrequency(uint8_t pin, int val)
|
|
{
|
|
val &= 0x07;
|
|
switch(digitalPinToTimer(pin))
|
|
{
|
|
|
|
#if defined(TCCR0A)
|
|
case TIMER0A:
|
|
case TIMER0B:
|
|
// TCCR0B &= ~(_BV(CS00) | _BV(CS01) | _BV(CS02));
|
|
// TCCR0B |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR1A)
|
|
case TIMER1A:
|
|
case TIMER1B:
|
|
// TCCR1B &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
|
|
// TCCR1B |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR2)
|
|
case TIMER2:
|
|
case TIMER2:
|
|
TCCR2 &= ~(_BV(CS10) | _BV(CS11) | _BV(CS12));
|
|
TCCR2 |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR2A)
|
|
case TIMER2A:
|
|
case TIMER2B:
|
|
TCCR2B &= ~(_BV(CS20) | _BV(CS21) | _BV(CS22));
|
|
TCCR2B |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR3A)
|
|
case TIMER3A:
|
|
case TIMER3B:
|
|
case TIMER3C:
|
|
TCCR3B &= ~(_BV(CS30) | _BV(CS31) | _BV(CS32));
|
|
TCCR3B |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR4A)
|
|
case TIMER4A:
|
|
case TIMER4B:
|
|
case TIMER4C:
|
|
TCCR4B &= ~(_BV(CS40) | _BV(CS41) | _BV(CS42));
|
|
TCCR4B |= val;
|
|
break;
|
|
#endif
|
|
|
|
#if defined(TCCR5A)
|
|
case TIMER5A:
|
|
case TIMER5B:
|
|
case TIMER5C:
|
|
TCCR5B &= ~(_BV(CS50) | _BV(CS51) | _BV(CS52));
|
|
TCCR5B |= val;
|
|
break;
|
|
#endif
|
|
|
|
}
|
|
}
|
|
#endif //FAST_PWM_FAN
|
|
|
|
bool setTargetedHotend(int code){
|
|
tmp_extruder = active_extruder;
|
|
if(code_seen('T')) {
|
|
tmp_extruder = code_value();
|
|
if(tmp_extruder >= EXTRUDERS) {
|
|
SERIAL_ECHO_START;
|
|
switch(code){
|
|
case 104:
|
|
SERIAL_ECHO(MSG_M104_INVALID_EXTRUDER);
|
|
break;
|
|
case 105:
|
|
SERIAL_ECHO(MSG_M105_INVALID_EXTRUDER);
|
|
break;
|
|
case 109:
|
|
SERIAL_ECHO(MSG_M109_INVALID_EXTRUDER);
|
|
break;
|
|
case 218:
|
|
SERIAL_ECHO(MSG_M218_INVALID_EXTRUDER);
|
|
break;
|
|
}
|
|
SERIAL_ECHOLN(tmp_extruder);
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|