Ian Jackson adee81170d M206: save values in eeprom ... Really, we should have a way to adjust the XYZ homing of a machine in the eeprom. So as the second stage of this, make the M206 home offset parameters subject to the M500/M501/M502/M503 eeprom commands. Bump the eeprom version to "V06". Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>		2012-08-11 01:43:00 +01:00
..
Gen7	Fix cast warning in Gen7	2012-02-23 18:50:05 +01:00
hardware/tools/avr/etc	ATMega1284P support for Arduino IDE	2012-02-17 11:41:47 +01:00
Sanguino	Fixed compiler warning for Sanguino compile	2012-02-26 17:35:01 +01:00
cardreader.cpp	made prepare->autostart independent of current folder.	2012-03-19 20:24:40 +01:00
cardreader.h	__ header file replace	2012-06-02 20:44:17 +02:00
Configuration_adv.h	Support step motor controllers with active low step pins.	2012-06-29 16:27:47 +02:00
Configuration.h	Fixed soft limits when the origin is in the middle.	2012-07-14 22:24:26 +02:00
COPYING	first commit	2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py	Added 20MHz support.	2012-03-11 12:25:04 +01:00
createTemperatureLookup.py	first commit	2011-08-12 22:28:35 +02:00
EEPROMwrite.h	M206: save values in eeprom	2012-08-11 01:43:00 +01:00
fastio.h	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2012-02-13 13:07:55 +01:00
language.h	added firmware retract. disabled by default	2012-06-02 20:32:28 +02:00
Makefile	Makefile: Better display of size (device memory usage)	2012-08-10 19:36:30 +01:00
Marlin.h	eeprom: provide smaller code for SERIAL_ECHOPAIR	2012-08-11 01:42:59 +01:00
Marlin.pde	HOMEAXIS: make into a function	2012-08-11 01:43:00 +01:00
MarlinSerial.cpp	Teensylu support.	2012-02-09 19:27:45 +01:00
MarlinSerial.h	Teensylu support.	2012-02-09 19:27:45 +01:00
motion_control.cpp	software_endstops: use *_MIN_POS and *_MAX_POS for arcs	2012-08-10 19:36:30 +01:00
motion_control.h	Removed interrupt nesting in the stepper ISR.	2011-11-27 21:12:55 +01:00
pins.h	Fixed soft limits when the origin is in the middle.	2012-07-14 22:24:26 +02:00
planner.cpp	Fixed AD595 define	2012-06-11 17:33:42 +02:00
planner.h	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	2012-05-09 08:05:13 +03:00
Sd2Card.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
Sd2Card.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
Sd2PinMap.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdBaseFile.cpp	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	2012-02-11 16:02:47 +01:00
SdBaseFile.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatConfig.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatStructs.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatUtil.cpp	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	2012-02-11 16:02:47 +01:00
SdFatUtil.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFile.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFile.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdInfo.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdVolume.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdVolume.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
speed_lookuptable.h	Added 20MHz support.	2012-03-11 12:25:04 +01:00
stepper.cpp	Fixed typo	2012-07-14 17:25:35 +03:00
stepper.h	merging	2011-12-12 20:35:46 +01:00
temperature.cpp	Limit PID autotune PWM to PID_MAX	2012-05-16 19:32:23 +02:00
temperature.h	Added support for 2nd extruder temperature to UltraLCD	2012-04-27 14:51:32 +02:00
thermistortables.h	Merge pull request #170 from linagee/Marlin_v1	2012-06-02 03:46:56 -07:00
ultralcd.h	__ header file replace	2012-06-02 20:44:17 +02:00
ultralcd.pde	Fixed AD595 define	2012-06-11 17:33:42 +02:00
watchdog.h	__ header file replace	2012-06-02 20:44:17 +02:00
watchdog.pde	simplified the includes, makefile now works with arduino23	2011-12-22 14:55:45 +01:00
wiring.h	add wiring.h, that can be used to overwrite:	2011-12-22 14:57:28 +01:00