mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-30 07:17:59 +00:00
88 lines
2.6 KiB
C
88 lines
2.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Arduino Mega with RAMPS v1.4Plus, also known as 3DYMY version, pin assignments
|
|
* The differences to the RAMPS v1.4 are:
|
|
* - Swap heater E0 with E1
|
|
* - Swap pins 8 and 10. Bed/Fan/Hotend as labeled on the board are on pins 8/9/10.
|
|
* - Change pins 16->42, 17->44 and 29->53 used for display.
|
|
*
|
|
* Applies to the following boards:
|
|
*
|
|
* RAMPS_PLUS_EFB (Extruder, Fan, Bed)
|
|
* RAMPS_PLUS_EEB (Extruder, Extruder, Bed)
|
|
* RAMPS_PLUS_EFF (Extruder, Fan, Fan)
|
|
* RAMPS_PLUS_EEF (Extruder, Extruder, Fan)
|
|
* RAMPS_PLUS_SF (Spindle, Controller Fan)
|
|
*
|
|
*/
|
|
|
|
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
|
|
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#ifndef BOARD_NAME
|
|
#define BOARD_NAME "RAMPS 1.4 Plus"
|
|
#endif
|
|
|
|
#define RAMPS_D8_PIN 10
|
|
#define RAMPS_D10_PIN 8
|
|
|
|
#include "pins_RAMPS.h"
|
|
|
|
//
|
|
// Steppers - Swap E0 / E1 on 3DYMY
|
|
//
|
|
#undef E0_STEP_PIN
|
|
#undef E0_DIR_PIN
|
|
#undef E0_ENABLE_PIN
|
|
|
|
#undef E1_STEP_PIN
|
|
#undef E1_DIR_PIN
|
|
#undef E1_ENABLE_PIN
|
|
|
|
#define E0_STEP_PIN 36
|
|
#define E0_DIR_PIN 34
|
|
#define E0_ENABLE_PIN 30
|
|
|
|
#define E1_STEP_PIN 26
|
|
#define E1_DIR_PIN 28
|
|
#define E1_ENABLE_PIN 24
|
|
|
|
#undef X_CS_PIN
|
|
#undef Y_CS_PIN
|
|
#undef Z_CS_PIN
|
|
#undef E0_CS_PIN
|
|
#undef E1_CS_PIN
|
|
|
|
#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && (DISABLED(NEWPANEL) || DISABLED(PANEL_ONE)) && DISABLED(CR10_STOCKDISPLAY)
|
|
#if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
|
|
#undef LCD_PINS_RS
|
|
#define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42
|
|
#undef LCD_PINS_ENABLE
|
|
#define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44
|
|
#endif
|
|
#undef LCD_PINS_D7
|
|
#define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53
|
|
#endif
|