3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 22:11:38 +00:00
Code Issues Releases Wiki Activity
33217b0dd0
MarlinFirmware/Marlin/src/lcd/extui/ui_api.cpp
Scott Lahteine 33217b0dd0 Add HOTEND_OVERSHOOT
2020-04-27 05:07:08 -05:00

1124 lines
35 KiB
C++
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**************
* ui_api.cpp *
**************/
/****************************************************************************
* Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
* *
* This program is free software: you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation, either version 3 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* To view a copy of the GNU General Public License, go to the following *
* location: <http://www.gnu.org/licenses/>. *
****************************************************************************/
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../ultralcd.h"
#include "../../gcode/queue.h"
#include "../../module/motion.h"
#include "../../module/planner.h"
#include "../../module/probe.h"
#include "../../module/temperature.h"
#include "../../module/printcounter.h"
#include "../../libs/duration_t.h"
#include "../../HAL/shared/Delay.h"
#if ENABLED(PRINTCOUNTER)
#include "../../core/utility.h"
#include "../../libs/numtostr.h"
#endif
#if EXTRUDERS > 1
#include "../../module/tool_change.h"
#endif
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/e_parser.h"
#endif
#if ENABLED(SDSUPPORT)
#include "../../sd/cardreader.h"
#define IFSD(A,B) (A)
#else
#define IFSD(A,B) (B)
#endif
#if HAS_TRINAMIC_CONFIG
#include "../../feature/tmc_util.h"
#include "../../module/stepper/indirection.h"
#endif
#include "ui_api.h"
#if ENABLED(BACKLASH_GCODE)
#include "../../feature/backlash.h"
#endif
#if HAS_LEVELING
#include "../../feature/bedlevel/bedlevel.h"
#endif
#if HAS_FILAMENT_SENSOR
#include "../../feature/runout.h"
#endif
#if ENABLED(CASE_LIGHT_ENABLE)
#include "../../feature/caselight.h"
#endif
#if ENABLED(BABYSTEPPING)
#include "../../feature/babystep.h"
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../../feature/host_actions.h"
#endif
namespace ExtUI {
static struct {
uint8_t printer_killed : 1;
TERN_(JOYSTICK, uint8_t jogging : 1);
TERN_(SDSUPPORT, uint8_t was_sd_printing : 1);
} flags;
#ifdef __SAM3X8E__
/**
* Implement a special millis() to allow time measurement
* within an ISR (such as when the printer is killed).
*
* To keep proper time, must be called at least every 1s.
*/
uint32_t safe_millis() {
// Not killed? Just call millis()
if (!flags.printer_killed) return millis();
static uint32_t currTimeHI = 0; /* Current time */
// Machine was killed, reinit SysTick so we are able to compute time without ISRs
if (currTimeHI == 0) {
// Get the last time the Arduino time computed (from CMSIS) and convert it to SysTick
currTimeHI = (uint32_t)((GetTickCount() * (uint64_t)(F_CPU / 8000)) >> 24);
// Reinit the SysTick timer to maximize its period
SysTick->LOAD = SysTick_LOAD_RELOAD_Msk; // get the full range for the systick timer
SysTick->VAL = 0; // Load the SysTick Counter Value
SysTick->CTRL = // MCLK/8 as source
// No interrupts
SysTick_CTRL_ENABLE_Msk; // Enable SysTick Timer
}
// Check if there was a timer overflow from the last read
if (SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) {
// There was. This means (SysTick_LOAD_RELOAD_Msk * 1000 * 8)/F_CPU ms has elapsed
currTimeHI++;
}
// Calculate current time in milliseconds
uint32_t currTimeLO = SysTick_LOAD_RELOAD_Msk - SysTick->VAL; // (in MCLK/8)
uint64_t currTime = ((uint64_t)currTimeLO) | (((uint64_t)currTimeHI) << 24);
// The ms count is
return (uint32_t)(currTime / (F_CPU / 8000));
}
#endif // __SAM3X8E__
void delay_us(unsigned long us) { DELAY_US(us); }
void delay_ms(unsigned long ms) {
if (flags.printer_killed)
DELAY_US(ms * 1000);
else
safe_delay(ms);
}
void yield() {
if (!flags.printer_killed)
thermalManager.manage_heater();
}
void enableHeater(const extruder_t extruder) {
#if HOTENDS && HEATER_IDLE_HANDLER
thermalManager.reset_hotend_idle_timer(extruder - E0);
#else
UNUSED(extruder);
#endif
}
void enableHeater(const heater_t heater) {
#if HEATER_IDLE_HANDLER
switch (heater) {
#if HAS_HEATED_BED
case BED:
thermalManager.reset_bed_idle_timer();
return;
#endif
#if HAS_HEATED_CHAMBER
case CHAMBER: return; // Chamber has no idle timer
#endif
default:
TERN_(HAS_HOTEND, thermalManager.reset_hotend_idle_timer(heater - H0));
break;
}
#else
UNUSED(heater);
#endif
}
#if ENABLED(JOYSTICK)
/**
* Jogs in the direction given by the vector (dx, dy, dz).
* The values range from -1 to 1 mapping to the maximum
* feedrate for an axis.
*
* The axis will continue to jog until this function is
* called with all zeros.
*/
void jog(const xyz_float_t &dir) {
// The "destination" variable is used as a scratchpad in
// Marlin by GCODE routines, but should remain untouched
// during manual jogging, allowing us to reuse the space
// for our direction vector.
destination = dir;
flags.jogging = !NEAR_ZERO(dir.x) || !NEAR_ZERO(dir.y) || !NEAR_ZERO(dir.z);
}
// Called by the polling routine in "joystick.cpp"
void _joystick_update(xyz_float_t &norm_jog) {
if (flags.jogging) {
#define OUT_OF_RANGE(VALUE) (VALUE < -1.0f || VALUE > 1.0f)
if (OUT_OF_RANGE(destination.x) || OUT_OF_RANGE(destination.y) || OUT_OF_RANGE(destination.z)) {
// If destination on any axis is out of range, it
// probably means the UI forgot to stop jogging and
// ran GCODE that wrote a position to destination.
// To prevent a disaster, stop jogging.
flags.jogging = false;
return;
}
norm_jog = destination;
}
}
#endif
bool isHeaterIdle(const extruder_t extruder) {
return false
#if HOTENDS && HEATER_IDLE_HANDLER
|| thermalManager.hotend_idle[extruder - E0].timed_out
#else
; UNUSED(extruder)
#endif
;
}
bool isHeaterIdle(const heater_t heater) {
#if HEATER_IDLE_HANDLER
switch (heater) {
TERN_(HAS_HEATED_BED, case BED: return thermalManager.bed_idle.timed_out);
#if HAS_HEATED_CHAMBER
case CHAMBER: return false; // Chamber has no idle timer
#endif
default:
#if HAS_HOTEND
return thermalManager.hotend_idle[heater - H0].timed_out;
#else
return false;
#endif
}
#else
UNUSED(heater);
return false;
#endif
}
#ifdef TOUCH_UI_LCD_TEMP_SCALING
#define GET_TEMP_ADJUSTMENT(A) float(A)/TOUCH_UI_LCD_TEMP_SCALING
#else
#define GET_TEMP_ADJUSTMENT(A) A
#endif
float getActualTemp_celsius(const heater_t heater) {
switch (heater) {
TERN_(HAS_HEATED_BED, case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degBed()));
TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degChamber()));
default: return GET_TEMP_ADJUSTMENT(thermalManager.degHotend(heater - H0));
}
}
float getActualTemp_celsius(const extruder_t extruder) {
return GET_TEMP_ADJUSTMENT(thermalManager.degHotend(extruder - E0));
}
float getTargetTemp_celsius(const heater_t heater) {
switch (heater) {
TERN_(HAS_HEATED_BED, case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetBed()));
TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetChamber()));
default: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetHotend(heater - H0));
}
}
float getTargetTemp_celsius(const extruder_t extruder) {
return GET_TEMP_ADJUSTMENT(thermalManager.degTargetHotend(extruder - E0));
}
float getTargetFan_percent(const fan_t fan) {
#if HAS_FAN
return thermalManager.fanPercent(thermalManager.fan_speed[fan - FAN0]);
#else
UNUSED(fan);
return 0;
#endif
}
float getActualFan_percent(const fan_t fan) {
#if HAS_FAN
return thermalManager.fanPercent(thermalManager.scaledFanSpeed(fan - FAN0));
#else
UNUSED(fan);
return 0;
#endif
}
float getAxisPosition_mm(const axis_t axis) {
return
#if ENABLED(JOYSTICK)
flags.jogging ? destination[axis] :
#endif
current_position[axis];
}
float getAxisPosition_mm(const extruder_t extruder) {
const extruder_t old_tool = getActiveTool();
setActiveTool(extruder, true);
const float epos = (
#if ENABLED(JOYSTICK)
flags.jogging ? destination.e :
#endif
current_position.e
);
setActiveTool(old_tool, true);
return epos;
}
void setAxisPosition_mm(const float position, const axis_t axis) {
// Start with no limits to movement
float min = current_position[axis] - 1000,
max = current_position[axis] + 1000;
// Limit to software endstops, if enabled
#if HAS_SOFTWARE_ENDSTOPS
if (soft_endstops_enabled) switch (axis) {
case X_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_X, min = soft_endstop.min.x);
TERN_(MAX_SOFTWARE_ENDSTOP_X, max = soft_endstop.max.x);
break;
case Y_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Y, min = soft_endstop.min.y);
TERN_(MAX_SOFTWARE_ENDSTOP_Y, max = soft_endstop.max.y);
break;
case Z_AXIS:
TERN_(MIN_SOFTWARE_ENDSTOP_Z, min = soft_endstop.min.z);
TERN_(MAX_SOFTWARE_ENDSTOP_Z, max = soft_endstop.max.z);
default: break;
}
#endif // HAS_SOFTWARE_ENDSTOPS
// Delta limits XY based on the current offset from center
// This assumes the center is 0,0
#if ENABLED(DELTA)
if (axis != Z_AXIS) {
max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis
min = -max;
}
#endif
current_position[axis] = constrain(position, min, max);
line_to_current_position(manual_feedrate_mm_s[axis]);
}
void setAxisPosition_mm(const float position, const extruder_t extruder) {
setActiveTool(extruder, true);
current_position.e = position;
line_to_current_position(manual_feedrate_mm_s.e);
}
void setActiveTool(const extruder_t extruder, bool no_move) {
#if EXTRUDERS > 1
const uint8_t e = extruder - E0;
if (e != active_extruder) tool_change(e, no_move);
active_extruder = e;
#else
UNUSED(extruder);
UNUSED(no_move);
#endif
}
extruder_t getActiveTool() {
switch (active_extruder) {
case 5: return E5;
case 4: return E4;
case 3: return E3;
case 2: return E2;
case 1: return E1;
default: return E0;
}
}
bool isMoving() { return planner.has_blocks_queued(); }
bool canMove(const axis_t axis) {
switch (axis) {
#if IS_KINEMATIC || ENABLED(NO_MOTION_BEFORE_HOMING)
case X: return TEST(axis_homed, X_AXIS);
case Y: return TEST(axis_homed, Y_AXIS);
case Z: return TEST(axis_homed, Z_AXIS);
#else
case X: case Y: case Z: return true;
#endif
default: return false;
}
}
bool canMove(const extruder_t extruder) {
return !thermalManager.tooColdToExtrude(extruder - E0);
}
#if HAS_SOFTWARE_ENDSTOPS
bool getSoftEndstopState() { return soft_endstops_enabled; }
void setSoftEndstopState(const bool value) { soft_endstops_enabled = value; }
#endif
#if HAS_TRINAMIC_CONFIG
float getAxisCurrent_mA(const axis_t axis) {
switch (axis) {
#if AXIS_IS_TMC(X)
case X: return stepperX.getMilliamps();
#endif
#if AXIS_IS_TMC(Y)
case Y: return stepperY.getMilliamps();
#endif
#if AXIS_IS_TMC(Z)
case Z: return stepperZ.getMilliamps();
#endif
default: return NAN;
};
}
float getAxisCurrent_mA(const extruder_t extruder) {
switch (extruder) {
#if AXIS_IS_TMC(E0)
case E0: return stepperE0.getMilliamps();
#endif
#if AXIS_IS_TMC(E1)
case E1: return stepperE1.getMilliamps();
#endif
#if AXIS_IS_TMC(E2)
case E2: return stepperE2.getMilliamps();
#endif
#if AXIS_IS_TMC(E3)
case E3: return stepperE3.getMilliamps();
#endif
#if AXIS_IS_TMC(E4)
case E4: return stepperE4.getMilliamps();
#endif
#if AXIS_IS_TMC(E5)
case E5: return stepperE5.getMilliamps();
#endif
#if AXIS_IS_TMC(E6)
case E6: return stepperE6.getMilliamps();
#endif
#if AXIS_IS_TMC(E7)
case E7: return stepperE7.getMilliamps();
#endif
default: return NAN;
};
}
void setAxisCurrent_mA(const float mA, const axis_t axis) {
switch (axis) {
#if AXIS_IS_TMC(X)
case X: stepperX.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(Y)
case Y: stepperY.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(Z)
case Z: stepperZ.rms_current(constrain(mA, 500, 1500)); break;
#endif
default: break;
};
}
void setAxisCurrent_mA(const float mA, const extruder_t extruder) {
switch (extruder) {
#if AXIS_IS_TMC(E0)
case E0: stepperE0.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E1)
case E1: stepperE1.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E2)
case E2: stepperE2.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E3)
case E3: stepperE3.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E4)
case E4: stepperE4.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E5)
case E5: stepperE5.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E6)
case E6: stepperE6.rms_current(constrain(mA, 500, 1500)); break;
#endif
#if AXIS_IS_TMC(E7)
case E7: stepperE7.rms_current(constrain(mA, 500, 1500)); break;
#endif
default: break;
};
}
int getTMCBumpSensitivity(const axis_t axis) {
switch (axis) {
TERN_(X_SENSORLESS, case X: return stepperX.homing_threshold());
TERN_(Y_SENSORLESS, case Y: return stepperY.homing_threshold());
TERN_(Z_SENSORLESS, case Z: return stepperZ.homing_threshold());
default: return 0;
}
}
void setTMCBumpSensitivity(const float value, const axis_t axis) {
switch (axis) {
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
#if X_SENSORLESS
case X: stepperX.homing_threshold(value); break;
#endif
#if Y_SENSORLESS
case Y: stepperY.homing_threshold(value); break;
#endif
#if Z_SENSORLESS
case Z: stepperZ.homing_threshold(value); break;
#endif
#else
UNUSED(value);
#endif
default: break;
}
}
#endif
float getAxisSteps_per_mm(const axis_t axis) {
return planner.settings.axis_steps_per_mm[axis];
}
float getAxisSteps_per_mm(const extruder_t extruder) {
UNUSED_E(extruder);
return planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)];
}
void setAxisSteps_per_mm(const float value, const axis_t axis) {
planner.settings.axis_steps_per_mm[axis] = value;
}
void setAxisSteps_per_mm(const float value, const extruder_t extruder) {
UNUSED_E(extruder);
planner.settings.axis_steps_per_mm[E_AXIS_N(axis - E0)] = value;
}
feedRate_t getAxisMaxFeedrate_mm_s(const axis_t axis) {
return planner.settings.max_feedrate_mm_s[axis];
}
feedRate_t getAxisMaxFeedrate_mm_s(const extruder_t extruder) {
UNUSED_E(extruder);
return planner.settings.max_feedrate_mm_s[E_AXIS_N(axis - E0)];
}
void setAxisMaxFeedrate_mm_s(const feedRate_t value, const axis_t axis) {
planner.set_max_feedrate(axis, value);
}
void setAxisMaxFeedrate_mm_s(const feedRate_t value, const extruder_t extruder) {
UNUSED_E(extruder);
planner.set_max_feedrate(E_AXIS_N(extruder - E0), value);
}
float getAxisMaxAcceleration_mm_s2(const axis_t axis) {
return planner.settings.max_acceleration_mm_per_s2[axis];
}
float getAxisMaxAcceleration_mm_s2(const extruder_t extruder) {
UNUSED_E(extruder);
return planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(extruder - E0)];
}
void setAxisMaxAcceleration_mm_s2(const float value, const axis_t axis) {
planner.set_max_acceleration(axis, value);
}
void setAxisMaxAcceleration_mm_s2(const float value, const extruder_t extruder) {
UNUSED_E(extruder);
planner.set_max_acceleration(E_AXIS_N(extruder - E0), value);
}
#if HAS_FILAMENT_SENSOR
bool getFilamentRunoutEnabled() { return runout.enabled; }
void setFilamentRunoutEnabled(const bool value) { runout.enabled = value; }
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
float getFilamentRunoutDistance_mm() { return runout.runout_distance(); }
void setFilamentRunoutDistance_mm(const float value) { runout.set_runout_distance(constrain(value, 0, 999)); }
#endif
#endif
#if HAS_CASE_LIGHT
bool getCaseLightState() { return case_light_on; }
void setCaseLightState(const bool value) {
case_light_on = value;
update_case_light();
}
#if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
float getCaseLightBrightness_percent() { return ui8_to_percent(case_light_brightness); }
void setCaseLightBrightness_percent(const float value) {
case_light_brightness = map(constrain(value, 0, 100), 0, 100, 0, 255);
update_case_light();
}
#endif
#endif
#if ENABLED(LIN_ADVANCE)
float getLinearAdvance_mm_mm_s(const extruder_t extruder) {
return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0;
}
void setLinearAdvance_mm_mm_s(const float value, const extruder_t extruder) {
if (extruder < EXTRUDERS)
planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 999);
}
#endif
#if HAS_JUNCTION_DEVIATION
float getJunctionDeviation_mm() {
return planner.junction_deviation_mm;
}
void setJunctionDeviation_mm(const float value) {
planner.junction_deviation_mm = constrain(value, 0.001, 0.3);
TERN_(LIN_ADVANCE, planner.recalculate_max_e_jerk());
}
#else
float getAxisMaxJerk_mm_s(const axis_t axis) {
return planner.max_jerk[axis];
}
float getAxisMaxJerk_mm_s(const extruder_t) {
return planner.max_jerk.e;
}
void setAxisMaxJerk_mm_s(const float value, const axis_t axis) {
planner.set_max_jerk((AxisEnum)axis, value);
}
void setAxisMaxJerk_mm_s(const float value, const extruder_t) {
planner.set_max_jerk(E_AXIS, value);
}
#endif
feedRate_t getFeedrate_mm_s() { return feedrate_mm_s; }
int16_t getFlowPercentage(const extruder_t extr) { return planner.flow_percentage[extr]; }
feedRate_t getMinFeedrate_mm_s() { return planner.settings.min_feedrate_mm_s; }
feedRate_t getMinTravelFeedrate_mm_s() { return planner.settings.min_travel_feedrate_mm_s; }
float getPrintingAcceleration_mm_s2() { return planner.settings.acceleration; }
float getRetractAcceleration_mm_s2() { return planner.settings.retract_acceleration; }
float getTravelAcceleration_mm_s2() { return planner.settings.travel_acceleration; }
void setFeedrate_mm_s(const feedRate_t fr) { feedrate_mm_s = fr; }
void setFlow_percent(const int16_t flow, const extruder_t extr) { planner.set_flow(extr, flow); }
void setMinFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_feedrate_mm_s = fr; }
void setMinTravelFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_travel_feedrate_mm_s = fr; }
void setPrintingAcceleration_mm_s2(const float acc) { planner.settings.acceleration = acc; }
void setRetractAcceleration_mm_s2(const float acc) { planner.settings.retract_acceleration = acc; }
void setTravelAcceleration_mm_s2(const float acc) { planner.settings.travel_acceleration = acc; }
#if ENABLED(BABYSTEPPING)
bool babystepAxis_steps(const int16_t steps, const axis_t axis) {
switch (axis) {
#if ENABLED(BABYSTEP_XY)
case X: babystep.add_steps(X_AXIS, steps); break;
case Y: babystep.add_steps(Y_AXIS, steps); break;
#endif
case Z: babystep.add_steps(Z_AXIS, steps); break;
default: return false;
};
return true;
}
/**
* This function adjusts an axis during a print.
*
* When linked_nozzles is false, each nozzle in a multi-nozzle
* printer can be babystepped independently of the others. This
* lets the user to fine tune the Z-offset and Nozzle Offsets
* while observing the first layer of a print, regardless of
* what nozzle is printing.
*/
void smartAdjustAxis_steps(const int16_t steps, const axis_t axis, bool linked_nozzles) {
const float mm = steps * planner.steps_to_mm[axis];
if (!babystepAxis_steps(steps, axis)) return;
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
// Make it so babystepping in Z adjusts the Z probe offset.
if (axis == Z
#if EXTRUDERS > 1
&& (linked_nozzles || active_extruder == 0)
#endif
) probe.offset.z += mm;
#else
UNUSED(mm);
#endif
#if EXTRUDERS > 1 && HAS_HOTEND_OFFSET
/**
* When linked_nozzles is false, as an axis is babystepped
* adjust the hotend offsets so that the other nozzles are
* unaffected by the babystepping of the active nozzle.
*/
if (!linked_nozzles) {
HOTEND_LOOP()
if (e != active_extruder)
hotend_offset[e][axis] += mm;
normalizeNozzleOffset(X);
normalizeNozzleOffset(Y);
normalizeNozzleOffset(Z);
}
#else
UNUSED(linked_nozzles);
UNUSED(mm);
#endif
}
/**
* Converts a mm displacement to a number of whole number of
* steps that is at least mm long.
*/
int16_t mmToWholeSteps(const float mm, const axis_t axis) {
const float steps = mm / planner.steps_to_mm[axis];
return steps > 0 ? CEIL(steps) : FLOOR(steps);
}
#endif
float getZOffset_mm() {
#if HAS_BED_PROBE
return probe.offset.z;
#elif ENABLED(BABYSTEP_DISPLAY_TOTAL)
return (planner.steps_to_mm[Z_AXIS] * babystep.axis_total[BS_AXIS_IND(Z_AXIS)]);
#else
return 0.0;
#endif
}
void setZOffset_mm(const float value) {
#if HAS_BED_PROBE
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
probe.offset.z = value;
#elif ENABLED(BABYSTEP_DISPLAY_TOTAL)
babystep.add_mm(Z_AXIS, (value - getZOffset_mm()));
#else
UNUSED(value);
#endif
}
#if HAS_HOTEND_OFFSET
float getNozzleOffset_mm(const axis_t axis, const extruder_t extruder) {
if (extruder - E0 >= HOTENDS) return 0;
return hotend_offset[extruder - E0][axis];
}
void setNozzleOffset_mm(const float value, const axis_t axis, const extruder_t extruder) {
if (extruder - E0 >= HOTENDS) return;
hotend_offset[extruder - E0][axis] = value;
}
/**
* The UI should call this if needs to guarantee the first
* nozzle offset is zero (such as when it doesn't allow the
* user to edit the offset the first nozzle).
*/
void normalizeNozzleOffset(const axis_t axis) {
const float offs = hotend_offset[0][axis];
HOTEND_LOOP() hotend_offset[e][axis] -= offs;
}
#endif // HAS_HOTEND_OFFSET
#if HAS_BED_PROBE
float getProbeOffset_mm(const axis_t axis) {
return probe.offset.pos[axis];
}
void setProbeOffset_mm(const float val, const axis_t axis) {
probe.offset.pos[axis] = val;
}
#endif
#if ENABLED(BACKLASH_GCODE)
float getAxisBacklash_mm(const axis_t axis) { return backlash.distance_mm[axis]; }
void setAxisBacklash_mm(const float value, const axis_t axis)
{ backlash.distance_mm[axis] = constrain(value,0,5); }
float getBacklashCorrection_percent() { return ui8_to_percent(backlash.correction); }
void setBacklashCorrection_percent(const float value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); }
#ifdef BACKLASH_SMOOTHING_MM
float getBacklashSmoothing_mm() { return backlash.smoothing_mm; }
void setBacklashSmoothing_mm(const float value) { backlash.smoothing_mm = constrain(value, 0, 999); }
#endif
#endif
uint8_t getProgress_percent() {
return ui.get_progress_percent();
}
uint32_t getProgress_seconds_elapsed() {
const duration_t elapsed = print_job_timer.duration();
return elapsed.value;
}
#if HAS_LEVELING
bool getLevelingActive() { return planner.leveling_active; }
void setLevelingActive(const bool state) { set_bed_leveling_enabled(state); }
bool getMeshValid() { return leveling_is_valid(); }
#if HAS_MESH
bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; }
float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); }
void setMeshPoint(const xy_uint8_t &pos, const float zoff) {
if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) {
Z_VALUES(pos.x, pos.y) = zoff;
TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate());
}
}
#endif
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
void setHostResponse(const uint8_t response) { host_response_handler(response); }
#endif
#if ENABLED(PRINTCOUNTER)
char* getTotalPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints)); return buffer; }
char* getFinishedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().finishedPrints)); return buffer; }
char* getTotalPrintTime_str(char buffer[21]) { return duration_t(print_job_timer.getStats().printTime).toString(buffer); }
char* getLongestPrint_str(char buffer[21]) { return duration_t(print_job_timer.getStats().longestPrint).toString(buffer); }
char* getFilamentUsed_str(char buffer[21]) {
printStatistics stats = print_job_timer.getStats();
sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10);
return buffer;
}
#endif
float getFeedrate_percent() { return feedrate_percentage; }
#if ENABLED(PIDTEMP)
float getPIDValues_Kp(const extruder_t tool) {
return PID_PARAM(Kp, tool);
}
float getPIDValues_Ki(const extruder_t tool) {
return unscalePID_i(PID_PARAM(Ki, tool));
}
float getPIDValues_Kd(const extruder_t tool) {
return unscalePID_d(PID_PARAM(Kd, tool));
}
void setPIDValues(const float p, const float i, const float d, extruder_t tool) {
thermalManager.temp_hotend[tool].pid.Kp = p;
thermalManager.temp_hotend[tool].pid.Ki = scalePID_i(i);
thermalManager.temp_hotend[tool].pid.Kd = scalePID_d(d);
thermalManager.updatePID();
}
void startPIDTune(const float temp, extruder_t tool){
thermalManager.PID_autotune(temp, (heater_ind_t)tool, 8, true);
}
#endif
#if ENABLED(PIDTEMPBED)
float getBedPIDValues_Kp() {
return thermalManager.temp_bed.pid.Kp;
}
float getBedPIDValues_Ki() {
return unscalePID_i(thermalManager.temp_bed.pid.Ki);
}
float getBedPIDValues_Kd() {
return unscalePID_d(thermalManager.temp_bed.pid.Kd);
}
void setBedPIDValues(const float p, const float i, const float d) {
thermalManager.temp_bed.pid.Kp = p;
thermalManager.temp_bed.pid.Ki = scalePID_i(i);
thermalManager.temp_bed.pid.Kd = scalePID_d(d);
thermalManager.updatePID();
}
void startBedPIDTune(const float temp) {
thermalManager.PID_autotune(temp, H_BED, 4, true);
}
#endif
void injectCommands_P(PGM_P const gcode) {
queue.inject_P(gcode);
}
bool commandsInQueue() { return (planner.movesplanned() || queue.has_commands_queued()); }
bool isAxisPositionKnown(const axis_t axis) {
return TEST(axis_known_position, axis);
}
bool isAxisPositionKnown(const extruder_t) {
return TEST(axis_known_position, E_AXIS);
}
bool isPositionKnown() { return all_axes_known(); }
bool isMachineHomed() { return all_axes_homed(); }
PGM_P getFirmwareName_str() {
static const char firmware_name[] PROGMEM = "Marlin " SHORT_BUILD_VERSION;
return firmware_name;
}
void setTargetTemp_celsius(float value, const heater_t heater) {
#ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING;
#endif
enableHeater(heater);
#if HAS_HEATED_CHAMBER
if (heater == CHAMBER)
thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAXTEMP - 10)));
else
#endif
#if HAS_HEATED_BED
if (heater == BED)
thermalManager.setTargetBed(LROUND(constrain(value, 0, BED_MAX_TARGET)));
else
#endif
{
#if HAS_HOTEND
const int16_t e = heater - H0;
thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
#endif
}
}
void setTargetTemp_celsius(float value, const extruder_t extruder) {
#ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING;
#endif
#if HAS_HOTEND
const int16_t e = extruder - E0;
enableHeater(extruder);
thermalManager.setTargetHotend(LROUND(constrain(value, 0, heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
#endif
}
void setTargetFan_percent(const float value, const fan_t fan) {
#if HAS_FAN
if (fan < FAN_COUNT)
thermalManager.set_fan_speed(fan - FAN0, map(constrain(value, 0, 100), 0, 100, 0, 255));
#else
UNUSED(value);
UNUSED(fan);
#endif
}
void setFeedrate_percent(const float value) {
feedrate_percentage = constrain(value, 10, 500);
}
void setUserConfirmed() {
TERN_(HAS_RESUME_CONTINUE, wait_for_user = false);
}
void printFile(const char *filename) {
UNUSED(filename);
IFSD(card.openAndPrintFile(filename), NOOP);
}
bool isPrintingFromMediaPaused() {
return IFSD(isPrintingFromMedia() && !IS_SD_PRINTING(), false);
}
bool isPrintingFromMedia() {
#if ENABLED(SDSUPPORT)
// Account for when IS_SD_PRINTING() reports the end of the
// print when there is still SD card data in the planner.
flags.was_sd_printing = card.isFileOpen() || (flags.was_sd_printing && commandsInQueue());
return flags.was_sd_printing;
#else
return false;
#endif
}
bool isPrinting() {
return (commandsInQueue() || isPrintingFromMedia() || IFSD(IS_SD_PRINTING(), false));
}
bool isMediaInserted() {
return IFSD(IS_SD_INSERTED() && card.isMounted(), false);
}
void pausePrint() {
ui.pause_print();
}
void resumePrint() {
ui.resume_print();
}
void stopPrint() {
ui.abort_print();
}
void onUserConfirmRequired_P(PGM_P const pstr) {
char msg[strlen_P(pstr) + 1];
strcpy_P(msg, pstr);
onUserConfirmRequired(msg);
}
void onStatusChanged_P(PGM_P const pstr) {
char msg[strlen_P(pstr) + 1];
strcpy_P(msg, pstr);
onStatusChanged(msg);
}
FileList::FileList() { refresh(); }
void FileList::refresh() { num_files = 0xFFFF; }
bool FileList::seek(const uint16_t pos, const bool skip_range_check) {
#if ENABLED(SDSUPPORT)
if (!skip_range_check && (pos + 1) > count()) return false;
const uint16_t nr =
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
count() - 1 -
#endif
pos;
card.getfilename_sorted(nr);
return card.filename[0] != '\0';
#else
UNUSED(pos);
UNUSED(skip_range_check);
return false;
#endif
}
const char* FileList::filename() {
return IFSD(card.longFilename[0] ? card.longFilename : card.filename, "");
}
const char* FileList::shortFilename() {
return IFSD(card.filename, "");
}
const char* FileList::longFilename() {
return IFSD(card.longFilename, "");
}
bool FileList::isDir() {
return IFSD(card.flag.filenameIsDir, false);
}
uint16_t FileList::count() {
return IFSD((num_files = (num_files == 0xFFFF ? card.get_num_Files() : num_files)), 0);
}
bool FileList::isAtRootDir() {
return (true
#if ENABLED(SDSUPPORT)
&& card.flag.workDirIsRoot
#endif
);
}
void FileList::upDir() {
#if ENABLED(SDSUPPORT)
card.cdup();
num_files = 0xFFFF;
#endif
}
void FileList::changeDir(const char * const dirname) {
#if ENABLED(SDSUPPORT)
card.cd(dirname);
num_files = 0xFFFF;
#else
UNUSED(dirname);
#endif
}
} // namespace ExtUI
// At the moment, we piggy-back off the ultralcd calls, but this could be cleaned up in the future
void MarlinUI::init() {
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
ExtUI::onStartup();
}
void MarlinUI::update() { ExtUI::onIdle(); }
void MarlinUI::kill_screen(PGM_P const error, PGM_P const component) {
using namespace ExtUI;
if (!flags.printer_killed) {
flags.printer_killed = true;
onPrinterKilled(error, component);
}
}
#endif // EXTENSIBLE_UI
Reference in New Issue View Git Blame Copy Permalink