mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-29 06:46:42 +00:00
124 lines
3.8 KiB
C++
124 lines
3.8 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Description: functions for I2C connected external EEPROM.
|
|
* Not platform dependent.
|
|
*
|
|
* TODO: Some platform Arduino libraries define these functions
|
|
* so Marlin needs to add a glue layer to prevent the conflict.
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
#if ENABLED(I2C_EEPROM)
|
|
|
|
#include "../HAL.h"
|
|
#include <Wire.h>
|
|
|
|
// ------------------------
|
|
// Private Variables
|
|
// ------------------------
|
|
|
|
static uint8_t eeprom_device_address = 0x50;
|
|
|
|
// ------------------------
|
|
// Public functions
|
|
// ------------------------
|
|
|
|
static void eeprom_init() {
|
|
Wire.begin();
|
|
}
|
|
|
|
void eeprom_write_byte(uint8_t *pos, unsigned char value) {
|
|
unsigned eeprom_address = (unsigned) pos;
|
|
|
|
eeprom_init();
|
|
|
|
Wire.beginTransmission(I2C_ADDRESS(eeprom_device_address));
|
|
Wire.write((int)(eeprom_address >> 8)); // MSB
|
|
Wire.write((int)(eeprom_address & 0xFF)); // LSB
|
|
Wire.write(value);
|
|
Wire.endTransmission();
|
|
|
|
// wait for write cycle to complete
|
|
// this could be done more efficiently with "acknowledge polling"
|
|
delay(5);
|
|
}
|
|
|
|
// WARNING: address is a page address, 6-bit end will wrap around
|
|
// also, data can be maximum of about 30 bytes, because the Wire library has a buffer of 32 bytes
|
|
void eeprom_update_block(const void *pos, void* eeprom_address, size_t n) {
|
|
eeprom_init();
|
|
|
|
Wire.beginTransmission(I2C_ADDRESS(eeprom_device_address));
|
|
Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB
|
|
Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB
|
|
Wire.endTransmission();
|
|
|
|
uint8_t *ptr = (uint8_t*)pos;
|
|
uint8_t flag = 0;
|
|
Wire.requestFrom(eeprom_device_address, (byte)n);
|
|
for (byte c = 0; c < n && Wire.available(); c++)
|
|
flag |= Wire.read() ^ ptr[c];
|
|
|
|
if (flag) {
|
|
Wire.beginTransmission(I2C_ADDRESS(eeprom_device_address));
|
|
Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB
|
|
Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB
|
|
Wire.write((uint8_t*)pos, n);
|
|
Wire.endTransmission();
|
|
|
|
// wait for write cycle to complete
|
|
// this could be done more efficiently with "acknowledge polling"
|
|
delay(5);
|
|
}
|
|
}
|
|
|
|
uint8_t eeprom_read_byte(uint8_t *pos) {
|
|
unsigned eeprom_address = (unsigned)pos;
|
|
|
|
eeprom_init();
|
|
|
|
Wire.beginTransmission(I2C_ADDRESS(eeprom_device_address));
|
|
Wire.write((int)(eeprom_address >> 8)); // MSB
|
|
Wire.write((int)(eeprom_address & 0xFF)); // LSB
|
|
Wire.endTransmission();
|
|
Wire.requestFrom(eeprom_device_address, (byte)1);
|
|
return Wire.available() ? Wire.read() : 0xFF;
|
|
}
|
|
|
|
// Don't read more than 30..32 bytes at a time!
|
|
void eeprom_read_block(void* pos, const void* eeprom_address, size_t n) {
|
|
eeprom_init();
|
|
|
|
Wire.beginTransmission(I2C_ADDRESS(eeprom_device_address));
|
|
Wire.write((int)((unsigned)eeprom_address >> 8)); // MSB
|
|
Wire.write((int)((unsigned)eeprom_address & 0xFF)); // LSB
|
|
Wire.endTransmission();
|
|
Wire.requestFrom(eeprom_device_address, (byte)n);
|
|
for (byte c = 0; c < n; c++ )
|
|
if (Wire.available()) *((uint8_t*)pos + c) = Wire.read();
|
|
}
|
|
|
|
#endif // I2C_EEPROM
|