3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 14:01:52 +00:00
Code Issues Releases Wiki Activity
3b0a40cd5d
MarlinFirmware/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp
Scott Lahteine c2c6a679ea
Rename LCD conditionals (#19533)
2020-09-28 01:13:27 -05:00

214 lines
9.0 KiB
C++
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Based on u8g_dev_uc1701_mini12864.c (dealextreme)
*
* Universal 8bit Graphics Library
*
* Copyright (c) 2011, olikraus@gmail.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "../../inc/MarlinConfigPre.h"
#if HAS_MARLINUI_U8GLIB
#include "HAL_LCD_com_defines.h"
#define WIDTH 128
#define HEIGHT 64
#define PAGE_HEIGHT 8
#define UC1701_ADC_REVERSE(N) ((N) ? 0xA1 : 0xA0)
#define UC1701_BIAS_MODE(N) ((N) ? 0xA3 : 0xA2)
#define UC1701_ALL_PIX(N) ((N) ? 0xA5 : 0xA4)
#define UC1701_INVERTED(N) ((N) ? 0xA7 : 0xA6)
#define UC1701_ON(N) ((N) ? 0xAF : 0xAE)
#define UC1701_OUT_MODE(N) ((N) ? 0xC8 : 0xC0)
#define UC1701_POWER_CONTROL(N) (0x28 | (N))
#define UC1701_V5_RATIO(N) (0x20 | ((N) & 0x7))
#define UC1701_CONTRAST(N) (0x81), (N)
#define UC1701_COLUMN_HI(N) (0x10 | (((N) >> 4) & 0xF))
#define UC1701_COLUMN_ADR(N) UC1701_COLUMN_HI(N), ((N) & 0xF)
#define UC1701_PAGE_ADR(N) (0xB0 | (N))
#define UC1701_START_LINE(N) (0x40 | (N))
#define UC1701_INDICATOR(N) (0xAC), (N)
#define UC1701_RESET() (0xE2)
#define UC1701_NOOP() (0xE3)
#define UC1701_BOOST_RATIO(N) (0xF8), (N)
static const uint8_t u8g_dev_uc1701_mini12864_HAL_init_seq[] PROGMEM = {
U8G_ESC_CS(0), // disable chip
U8G_ESC_ADR(0), // instruction mode
U8G_ESC_RST(1), // do reset low pulse with (1*16)+2 milliseconds
U8G_ESC_CS(1), // enable chip
UC1701_RESET(), // soft reset
UC1701_START_LINE(0), // set display start line to 0
UC1701_ADC_REVERSE(0), // ADC set to reverse
UC1701_OUT_MODE(1), // common output mode
UC1701_INVERTED(0), // display normal, bit val 0: LCD pixel off
UC1701_BIAS_MODE(0), // LCD bias 1/9
UC1701_POWER_CONTROL(0x7), // all power control circuits on
UC1701_BOOST_RATIO(0x0), // set booster ratio to 4x
UC1701_V5_RATIO(3), // set V0 voltage resistor ratio to large
UC1701_CONTRAST(0x27), // set contrast
UC1701_INDICATOR(0), // indicator disable
UC1701_ON(1), // display on
U8G_ESC_CS(0), // disable chip
U8G_ESC_DLY(100), // delay 100 ms
U8G_ESC_CS(1), // enable chip
UC1701_ALL_PIX(1), // display all points, ST7565
U8G_ESC_CS(0), // disable chip
U8G_ESC_DLY(100), // delay 100 ms
U8G_ESC_DLY(100), // delay 100 ms
U8G_ESC_CS(1), // enable chip
UC1701_ALL_PIX(0), // normal display
U8G_ESC_CS(0), // disable chip
U8G_ESC_DLY(150), // delay 150 ms before sending any data
U8G_ESC_END // end of sequence
};
static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
U8G_ESC_ADR(0), // instruction mode
U8G_ESC_CS(1), // enable chip
#if ANY(MKS_MINI_12864, ENDER2_STOCKDISPLAY, FYSETC_MINI_12864)
UC1701_START_LINE(0), // set display start line to 0
UC1701_ADC_REVERSE(0), // ADC set to reverse
UC1701_OUT_MODE(1), // common output mode
UC1701_INVERTED(0), // display normal, bit val 0: LCD pixel off
UC1701_BIAS_MODE(0), // LCD bias 1/9
UC1701_POWER_CONTROL(0x7),// all power control circuits on
UC1701_BOOST_RATIO(0x0), // set booster ratio to 4x
UC1701_V5_RATIO(3), // set V0 voltage resistor ratio to large
UC1701_INDICATOR(0), // indicator disable
UC1701_ON(1), // display on
UC1701_COLUMN_HI(0), // set upper 4 bit of the col adr to 0
U8G_ESC_END, // end of sequence
U8G_ESC_DLY(5) // delay 5 ms
#else
UC1701_COLUMN_ADR(0), // address 0
U8G_ESC_END // end of sequence
#endif
};
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch (msg) {
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
break;
case U8G_DEV_MSG_STOP: break;
case U8G_DEV_MSG_PAGE_NEXT: {
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
u8g_WriteByte(u8g, dev, 0x0B0 | pb->p.page); /* select current page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
if (!u8g_pb_WriteBuffer(pb, u8g, dev)) return 0;
u8g_SetChipSelect(u8g, dev, 0);
} break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch (msg) {
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
break;
case U8G_DEV_MSG_STOP: break;
case U8G_DEV_MSG_PAGE_NEXT: {
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
u8g_WriteByte(u8g, dev, 0x0B0 | (2 * pb->p.page)); /* select current page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)pb->buf);
u8g_SetChipSelect(u8g, dev, 0);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_data_start);
u8g_WriteByte(u8g, dev, 0x0B0 | (2 * pb->p.page + 1)); /* select current page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
u8g_WriteSequence(u8g, dev, pb->width, (uint8_t *)(pb->buf)+pb->width);
u8g_SetChipSelect(u8g, dev, 0);
} break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 2);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
U8G_PB_DEV(u8g_dev_uc1701_mini12864_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_uc1701_mini12864_HAL_fn, U8G_COM_HAL_HW_SPI_FN);
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;
u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_uc1701_mini12864_HAL_2x_buf};
u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN };
u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN };
#endif // HAS_MARLINUI_U8GLIB
Reference in New Issue View Git Blame Copy Permalink