mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 22:08:02 +00:00
6843b78f99
The PrintrBoard Rev F utilizes a mcp4728 DAC to set motor current. Printrbot's implementation utilizes 2 new M-codes to set and write the DAC settings to the DAC EEPROM: `M909` (Read DAC) and `M910` (Write DAC). `M907` is re-used to set value, `M908` for direct control. The Pins file for the RevF board is included.
45 lines
1.1 KiB
C
45 lines
1.1 KiB
C
/**
|
|
Arduino library for MicroChip MCP4728 I2C D/A converter.
|
|
*/
|
|
|
|
#ifndef mcp4728_h
|
|
#define mcp4728_h
|
|
|
|
#include "Configuration.h"
|
|
#include "Configuration_adv.h"
|
|
|
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
|
#include "WProgram.h"
|
|
#include "Wire.h"
|
|
//#include <Wire.h>
|
|
|
|
#define defaultVDD 5000
|
|
#define BASE_ADDR 0x60
|
|
#define RESET 0B00000110
|
|
#define WAKE 0B00001001
|
|
#define UPDATE 0B00001000
|
|
#define MULTIWRITE 0B01000000
|
|
#define SINGLEWRITE 0B01011000
|
|
#define SEQWRITE 0B01010000
|
|
#define VREFWRITE 0B10000000
|
|
#define GAINWRITE 0B11000000
|
|
#define POWERDOWNWRITE 0B10100000
|
|
#define GENERALCALL 0B0000000
|
|
#define GAINWRITE 0B11000000
|
|
|
|
// This is taken from the original lib, makes it easy to edit if needed
|
|
#define DAC_DEV_ADDRESS (BASE_ADDR | 0x00)
|
|
|
|
void mcp4728_init();
|
|
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
|
|
uint8_t mcp4728_eepromWrite();
|
|
uint8_t mcp4728_setVref_all(uint8_t value);
|
|
uint8_t mcp4728_setGain_all(uint8_t value);
|
|
uint16_t mcp4728_getValue(uint8_t channel);
|
|
uint8_t mcp4728_fastWrite();
|
|
uint8_t mcp4728_simpleCommand(byte simpleCommand);
|
|
|
|
#endif
|
|
#endif
|
|
|