mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-30 23:30:16 +00:00
647 lines
25 KiB
C
647 lines
25 KiB
C
/* Arduino SdFat Library
|
|
* Copyright (C) 2009 by William Greiman
|
|
*
|
|
* This file is part of the Arduino SdFat Library
|
|
*
|
|
* This Library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This Library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with the Arduino SdFat Library. If not, see
|
|
* <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "Marlin.h"
|
|
#if ENABLED(SDSUPPORT)
|
|
|
|
#ifndef SdFatStructs_h
|
|
#define SdFatStructs_h
|
|
|
|
#define PACKED __attribute__((__packed__))
|
|
/**
|
|
* \file
|
|
* \brief FAT file structures
|
|
*/
|
|
/*
|
|
* mostly from Microsoft document fatgen103.doc
|
|
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
|
|
*/
|
|
//------------------------------------------------------------------------------
|
|
/** Value for byte 510 of boot block or MBR */
|
|
uint8_t const BOOTSIG0 = 0X55;
|
|
/** Value for byte 511 of boot block or MBR */
|
|
uint8_t const BOOTSIG1 = 0XAA;
|
|
/** Value for bootSignature field int FAT/FAT32 boot sector */
|
|
uint8_t const EXTENDED_BOOT_SIG = 0X29;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \struct partitionTable
|
|
* \brief MBR partition table entry
|
|
*
|
|
* A partition table entry for a MBR formatted storage device.
|
|
* The MBR partition table has four entries.
|
|
*/
|
|
struct partitionTable {
|
|
/**
|
|
* Boot Indicator . Indicates whether the volume is the active
|
|
* partition. Legal values include: 0X00. Do not use for booting.
|
|
* 0X80 Active partition.
|
|
*/
|
|
uint8_t boot;
|
|
/**
|
|
* Head part of Cylinder-head-sector address of the first block in
|
|
* the partition. Legal values are 0-255. Only used in old PC BIOS.
|
|
*/
|
|
uint8_t beginHead;
|
|
/**
|
|
* Sector part of Cylinder-head-sector address of the first block in
|
|
* the partition. Legal values are 1-63. Only used in old PC BIOS.
|
|
*/
|
|
unsigned beginSector : 6;
|
|
/** High bits cylinder for first block in partition. */
|
|
unsigned beginCylinderHigh : 2;
|
|
/**
|
|
* Combine beginCylinderLow with beginCylinderHigh. Legal values
|
|
* are 0-1023. Only used in old PC BIOS.
|
|
*/
|
|
uint8_t beginCylinderLow;
|
|
/**
|
|
* Partition type. See defines that begin with PART_TYPE_ for
|
|
* some Microsoft partition types.
|
|
*/
|
|
uint8_t type;
|
|
/**
|
|
* head part of cylinder-head-sector address of the last sector in the
|
|
* partition. Legal values are 0-255. Only used in old PC BIOS.
|
|
*/
|
|
uint8_t endHead;
|
|
/**
|
|
* Sector part of cylinder-head-sector address of the last sector in
|
|
* the partition. Legal values are 1-63. Only used in old PC BIOS.
|
|
*/
|
|
unsigned endSector : 6;
|
|
/** High bits of end cylinder */
|
|
unsigned endCylinderHigh : 2;
|
|
/**
|
|
* Combine endCylinderLow with endCylinderHigh. Legal values
|
|
* are 0-1023. Only used in old PC BIOS.
|
|
*/
|
|
uint8_t endCylinderLow;
|
|
/** Logical block address of the first block in the partition. */
|
|
uint32_t firstSector;
|
|
/** Length of the partition, in blocks. */
|
|
uint32_t totalSectors;
|
|
} PACKED;
|
|
/** Type name for partitionTable */
|
|
typedef struct partitionTable part_t;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \struct masterBootRecord
|
|
*
|
|
* \brief Master Boot Record
|
|
*
|
|
* The first block of a storage device that is formatted with a MBR.
|
|
*/
|
|
struct masterBootRecord {
|
|
/** Code Area for master boot program. */
|
|
uint8_t codeArea[440];
|
|
/** Optional Windows NT disk signature. May contain boot code. */
|
|
uint32_t diskSignature;
|
|
/** Usually zero but may be more boot code. */
|
|
uint16_t usuallyZero;
|
|
/** Partition tables. */
|
|
part_t part[4];
|
|
/** First MBR signature byte. Must be 0X55 */
|
|
uint8_t mbrSig0;
|
|
/** Second MBR signature byte. Must be 0XAA */
|
|
uint8_t mbrSig1;
|
|
} PACKED;
|
|
/** Type name for masterBootRecord */
|
|
typedef struct masterBootRecord mbr_t;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \struct fat_boot
|
|
*
|
|
* \brief Boot sector for a FAT12/FAT16 volume.
|
|
*
|
|
*/
|
|
struct fat_boot {
|
|
/**
|
|
* The first three bytes of the boot sector must be valid,
|
|
* executable x 86-based CPU instructions. This includes a
|
|
* jump instruction that skips the next nonexecutable bytes.
|
|
*/
|
|
uint8_t jump[3];
|
|
/**
|
|
* This is typically a string of characters that identifies
|
|
* the operating system that formatted the volume.
|
|
*/
|
|
char oemId[8];
|
|
/**
|
|
* The size of a hardware sector. Valid decimal values for this
|
|
* field are 512, 1024, 2048, and 4096. For most disks used in
|
|
* the United States, the value of this field is 512.
|
|
*/
|
|
uint16_t bytesPerSector;
|
|
/**
|
|
* Number of sectors per allocation unit. This value must be a
|
|
* power of 2 that is greater than 0. The legal values are
|
|
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
|
|
*/
|
|
uint8_t sectorsPerCluster;
|
|
/**
|
|
* The number of sectors preceding the start of the first FAT,
|
|
* including the boot sector. The value of this field is always 1.
|
|
*/
|
|
uint16_t reservedSectorCount;
|
|
/**
|
|
* The number of copies of the FAT on the volume.
|
|
* The value of this field is always 2.
|
|
*/
|
|
uint8_t fatCount;
|
|
/**
|
|
* For FAT12 and FAT16 volumes, this field contains the count of
|
|
* 32-byte directory entries in the root directory. For FAT32 volumes,
|
|
* this field must be set to 0. For FAT12 and FAT16 volumes, this
|
|
* value should always specify a count that when multiplied by 32
|
|
* results in a multiple of bytesPerSector. FAT16 volumes should
|
|
* use the value 512.
|
|
*/
|
|
uint16_t rootDirEntryCount;
|
|
/**
|
|
* This field is the old 16-bit total count of sectors on the volume.
|
|
* This count includes the count of all sectors in all four regions
|
|
* of the volume. This field can be 0; if it is 0, then totalSectors32
|
|
* must be nonzero. For FAT32 volumes, this field must be 0. For
|
|
* FAT12 and FAT16 volumes, this field contains the sector count, and
|
|
* totalSectors32 is 0 if the total sector count fits
|
|
* (is less than 0x10000).
|
|
*/
|
|
uint16_t totalSectors16;
|
|
/**
|
|
* This dates back to the old MS-DOS 1.x media determination and is
|
|
* no longer usually used for anything. 0xF8 is the standard value
|
|
* for fixed (nonremovable) media. For removable media, 0xF0 is
|
|
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
|
|
*/
|
|
uint8_t mediaType;
|
|
/**
|
|
* Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
|
|
* On FAT32 volumes this field must be 0, and sectorsPerFat32
|
|
* contains the FAT size count.
|
|
*/
|
|
uint16_t sectorsPerFat16;
|
|
/** Sectors per track for interrupt 0x13. Not used otherwise. */
|
|
uint16_t sectorsPerTrack;
|
|
/** Number of heads for interrupt 0x13. Not used otherwise. */
|
|
uint16_t headCount;
|
|
/**
|
|
* Count of hidden sectors preceding the partition that contains this
|
|
* FAT volume. This field is generally only relevant for media
|
|
* visible on interrupt 0x13.
|
|
*/
|
|
uint32_t hidddenSectors;
|
|
/**
|
|
* This field is the new 32-bit total count of sectors on the volume.
|
|
* This count includes the count of all sectors in all four regions
|
|
* of the volume. This field can be 0; if it is 0, then
|
|
* totalSectors16 must be nonzero.
|
|
*/
|
|
uint32_t totalSectors32;
|
|
/**
|
|
* Related to the BIOS physical drive number. Floppy drives are
|
|
* identified as 0x00 and physical hard disks are identified as
|
|
* 0x80, regardless of the number of physical disk drives.
|
|
* Typically, this value is set prior to issuing an INT 13h BIOS
|
|
* call to specify the device to access. The value is only
|
|
* relevant if the device is a boot device.
|
|
*/
|
|
uint8_t driveNumber;
|
|
/** used by Windows NT - should be zero for FAT */
|
|
uint8_t reserved1;
|
|
/** 0X29 if next three fields are valid */
|
|
uint8_t bootSignature;
|
|
/**
|
|
* A random serial number created when formatting a disk,
|
|
* which helps to distinguish between disks.
|
|
* Usually generated by combining date and time.
|
|
*/
|
|
uint32_t volumeSerialNumber;
|
|
/**
|
|
* A field once used to store the volume label. The volume label
|
|
* is now stored as a special file in the root directory.
|
|
*/
|
|
char volumeLabel[11];
|
|
/**
|
|
* A field with a value of either FAT, FAT12 or FAT16,
|
|
* depending on the disk format.
|
|
*/
|
|
char fileSystemType[8];
|
|
/** X86 boot code */
|
|
uint8_t bootCode[448];
|
|
/** must be 0X55 */
|
|
uint8_t bootSectorSig0;
|
|
/** must be 0XAA */
|
|
uint8_t bootSectorSig1;
|
|
} PACKED;
|
|
/** Type name for FAT Boot Sector */
|
|
typedef struct fat_boot fat_boot_t;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \struct fat32_boot
|
|
*
|
|
* \brief Boot sector for a FAT32 volume.
|
|
*
|
|
*/
|
|
struct fat32_boot {
|
|
/**
|
|
* The first three bytes of the boot sector must be valid,
|
|
* executable x 86-based CPU instructions. This includes a
|
|
* jump instruction that skips the next nonexecutable bytes.
|
|
*/
|
|
uint8_t jump[3];
|
|
/**
|
|
* This is typically a string of characters that identifies
|
|
* the operating system that formatted the volume.
|
|
*/
|
|
char oemId[8];
|
|
/**
|
|
* The size of a hardware sector. Valid decimal values for this
|
|
* field are 512, 1024, 2048, and 4096. For most disks used in
|
|
* the United States, the value of this field is 512.
|
|
*/
|
|
uint16_t bytesPerSector;
|
|
/**
|
|
* Number of sectors per allocation unit. This value must be a
|
|
* power of 2 that is greater than 0. The legal values are
|
|
* 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided.
|
|
*/
|
|
uint8_t sectorsPerCluster;
|
|
/**
|
|
* The number of sectors preceding the start of the first FAT,
|
|
* including the boot sector. Must not be zero
|
|
*/
|
|
uint16_t reservedSectorCount;
|
|
/**
|
|
* The number of copies of the FAT on the volume.
|
|
* The value of this field is always 2.
|
|
*/
|
|
uint8_t fatCount;
|
|
/**
|
|
* FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0.
|
|
*/
|
|
uint16_t rootDirEntryCount;
|
|
/**
|
|
* For FAT32 volumes, this field must be 0.
|
|
*/
|
|
uint16_t totalSectors16;
|
|
/**
|
|
* This dates back to the old MS-DOS 1.x media determination and is
|
|
* no longer usually used for anything. 0xF8 is the standard value
|
|
* for fixed (nonremovable) media. For removable media, 0xF0 is
|
|
* frequently used. Legal values are 0xF0 or 0xF8-0xFF.
|
|
*/
|
|
uint8_t mediaType;
|
|
/**
|
|
* On FAT32 volumes this field must be 0, and sectorsPerFat32
|
|
* contains the FAT size count.
|
|
*/
|
|
uint16_t sectorsPerFat16;
|
|
/** Sectors per track for interrupt 0x13. Not used otherwise. */
|
|
uint16_t sectorsPerTrack;
|
|
/** Number of heads for interrupt 0x13. Not used otherwise. */
|
|
uint16_t headCount;
|
|
/**
|
|
* Count of hidden sectors preceding the partition that contains this
|
|
* FAT volume. This field is generally only relevant for media
|
|
* visible on interrupt 0x13.
|
|
*/
|
|
uint32_t hidddenSectors;
|
|
/**
|
|
* Contains the total number of sectors in the FAT32 volume.
|
|
*/
|
|
uint32_t totalSectors32;
|
|
/**
|
|
* Count of sectors occupied by one FAT on FAT32 volumes.
|
|
*/
|
|
uint32_t sectorsPerFat32;
|
|
/**
|
|
* This field is only defined for FAT32 media and does not exist on
|
|
* FAT12 and FAT16 media.
|
|
* Bits 0-3 -- Zero-based number of active FAT.
|
|
* Only valid if mirroring is disabled.
|
|
* Bits 4-6 -- Reserved.
|
|
* Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs.
|
|
* -- 1 means only one FAT is active; it is the one referenced
|
|
* in bits 0-3.
|
|
* Bits 8-15 -- Reserved.
|
|
*/
|
|
uint16_t fat32Flags;
|
|
/**
|
|
* FAT32 version. High byte is major revision number.
|
|
* Low byte is minor revision number. Only 0.0 define.
|
|
*/
|
|
uint16_t fat32Version;
|
|
/**
|
|
* Cluster number of the first cluster of the root directory for FAT32.
|
|
* This usually 2 but not required to be 2.
|
|
*/
|
|
uint32_t fat32RootCluster;
|
|
/**
|
|
* Sector number of FSINFO structure in the reserved area of the
|
|
* FAT32 volume. Usually 1.
|
|
*/
|
|
uint16_t fat32FSInfo;
|
|
/**
|
|
* If nonzero, indicates the sector number in the reserved area
|
|
* of the volume of a copy of the boot record. Usually 6.
|
|
* No value other than 6 is recommended.
|
|
*/
|
|
uint16_t fat32BackBootBlock;
|
|
/**
|
|
* Reserved for future expansion. Code that formats FAT32 volumes
|
|
* should always set all of the bytes of this field to 0.
|
|
*/
|
|
uint8_t fat32Reserved[12];
|
|
/**
|
|
* Related to the BIOS physical drive number. Floppy drives are
|
|
* identified as 0x00 and physical hard disks are identified as
|
|
* 0x80, regardless of the number of physical disk drives.
|
|
* Typically, this value is set prior to issuing an INT 13h BIOS
|
|
* call to specify the device to access. The value is only
|
|
* relevant if the device is a boot device.
|
|
*/
|
|
uint8_t driveNumber;
|
|
/** used by Windows NT - should be zero for FAT */
|
|
uint8_t reserved1;
|
|
/** 0X29 if next three fields are valid */
|
|
uint8_t bootSignature;
|
|
/**
|
|
* A random serial number created when formatting a disk,
|
|
* which helps to distinguish between disks.
|
|
* Usually generated by combining date and time.
|
|
*/
|
|
uint32_t volumeSerialNumber;
|
|
/**
|
|
* A field once used to store the volume label. The volume label
|
|
* is now stored as a special file in the root directory.
|
|
*/
|
|
char volumeLabel[11];
|
|
/**
|
|
* A text field with a value of FAT32.
|
|
*/
|
|
char fileSystemType[8];
|
|
/** X86 boot code */
|
|
uint8_t bootCode[420];
|
|
/** must be 0X55 */
|
|
uint8_t bootSectorSig0;
|
|
/** must be 0XAA */
|
|
uint8_t bootSectorSig1;
|
|
} PACKED;
|
|
/** Type name for FAT32 Boot Sector */
|
|
typedef struct fat32_boot fat32_boot_t;
|
|
//------------------------------------------------------------------------------
|
|
/** Lead signature for a FSINFO sector */
|
|
uint32_t const FSINFO_LEAD_SIG = 0x41615252;
|
|
/** Struct signature for a FSINFO sector */
|
|
uint32_t const FSINFO_STRUCT_SIG = 0x61417272;
|
|
/**
|
|
* \struct fat32_fsinfo
|
|
*
|
|
* \brief FSINFO sector for a FAT32 volume.
|
|
*
|
|
*/
|
|
struct fat32_fsinfo {
|
|
/** must be 0X52, 0X52, 0X61, 0X41 */
|
|
uint32_t leadSignature;
|
|
/** must be zero */
|
|
uint8_t reserved1[480];
|
|
/** must be 0X72, 0X72, 0X41, 0X61 */
|
|
uint32_t structSignature;
|
|
/**
|
|
* Contains the last known free cluster count on the volume.
|
|
* If the value is 0xFFFFFFFF, then the free count is unknown
|
|
* and must be computed. Any other value can be used, but is
|
|
* not necessarily correct. It should be range checked at least
|
|
* to make sure it is <= volume cluster count.
|
|
*/
|
|
uint32_t freeCount;
|
|
/**
|
|
* This is a hint for the FAT driver. It indicates the cluster
|
|
* number at which the driver should start looking for free clusters.
|
|
* If the value is 0xFFFFFFFF, then there is no hint and the driver
|
|
* should start looking at cluster 2.
|
|
*/
|
|
uint32_t nextFree;
|
|
/** must be zero */
|
|
uint8_t reserved2[12];
|
|
/** must be 0X00, 0X00, 0X55, 0XAA */
|
|
uint8_t tailSignature[4];
|
|
} PACKED;
|
|
/** Type name for FAT32 FSINFO Sector */
|
|
typedef struct fat32_fsinfo fat32_fsinfo_t;
|
|
//------------------------------------------------------------------------------
|
|
// End Of Chain values for FAT entries
|
|
/** FAT12 end of chain value used by Microsoft. */
|
|
uint16_t const FAT12EOC = 0XFFF;
|
|
/** Minimum value for FAT12 EOC. Use to test for EOC. */
|
|
uint16_t const FAT12EOC_MIN = 0XFF8;
|
|
/** FAT16 end of chain value used by Microsoft. */
|
|
uint16_t const FAT16EOC = 0XFFFF;
|
|
/** Minimum value for FAT16 EOC. Use to test for EOC. */
|
|
uint16_t const FAT16EOC_MIN = 0XFFF8;
|
|
/** FAT32 end of chain value used by Microsoft. */
|
|
uint32_t const FAT32EOC = 0X0FFFFFFF;
|
|
/** Minimum value for FAT32 EOC. Use to test for EOC. */
|
|
uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;
|
|
/** Mask a for FAT32 entry. Entries are 28 bits. */
|
|
uint32_t const FAT32MASK = 0X0FFFFFFF;
|
|
//------------------------------------------------------------------------------
|
|
/**
|
|
* \struct directoryEntry
|
|
* \brief FAT short directory entry
|
|
*
|
|
* Short means short 8.3 name, not the entry size.
|
|
*
|
|
* Date Format. A FAT directory entry date stamp is a 16-bit field that is
|
|
* basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
|
|
* format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
|
|
* 16-bit word):
|
|
*
|
|
* Bits 9-15: Count of years from 1980, valid value range 0-127
|
|
* inclusive (1980-2107).
|
|
*
|
|
* Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
|
|
*
|
|
* Bits 0-4: Day of month, valid value range 1-31 inclusive.
|
|
*
|
|
* Time Format. A FAT directory entry time stamp is a 16-bit field that has
|
|
* a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
|
|
* 16-bit word, bit 15 is the MSB of the 16-bit word).
|
|
*
|
|
* Bits 11-15: Hours, valid value range 0-23 inclusive.
|
|
*
|
|
* Bits 5-10: Minutes, valid value range 0-59 inclusive.
|
|
*
|
|
* Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
|
|
*
|
|
* The valid time range is from Midnight 00:00:00 to 23:59:58.
|
|
*/
|
|
struct directoryEntry {
|
|
/** Short 8.3 name.
|
|
*
|
|
* The first eight bytes contain the file name with blank fill.
|
|
* The last three bytes contain the file extension with blank fill.
|
|
*/
|
|
uint8_t name[11];
|
|
/** Entry attributes.
|
|
*
|
|
* The upper two bits of the attribute byte are reserved and should
|
|
* always be set to 0 when a file is created and never modified or
|
|
* looked at after that. See defines that begin with DIR_ATT_.
|
|
*/
|
|
uint8_t attributes;
|
|
/**
|
|
* Reserved for use by Windows NT. Set value to 0 when a file is
|
|
* created and never modify or look at it after that.
|
|
*/
|
|
uint8_t reservedNT;
|
|
/**
|
|
* The granularity of the seconds part of creationTime is 2 seconds
|
|
* so this field is a count of tenths of a second and its valid
|
|
* value range is 0-199 inclusive. (WHG note - seems to be hundredths)
|
|
*/
|
|
uint8_t creationTimeTenths;
|
|
/** Time file was created. */
|
|
uint16_t creationTime;
|
|
/** Date file was created. */
|
|
uint16_t creationDate;
|
|
/**
|
|
* Last access date. Note that there is no last access time, only
|
|
* a date. This is the date of last read or write. In the case of
|
|
* a write, this should be set to the same date as lastWriteDate.
|
|
*/
|
|
uint16_t lastAccessDate;
|
|
/**
|
|
* High word of this entry's first cluster number (always 0 for a
|
|
* FAT12 or FAT16 volume).
|
|
*/
|
|
uint16_t firstClusterHigh;
|
|
/** Time of last write. File creation is considered a write. */
|
|
uint16_t lastWriteTime;
|
|
/** Date of last write. File creation is considered a write. */
|
|
uint16_t lastWriteDate;
|
|
/** Low word of this entry's first cluster number. */
|
|
uint16_t firstClusterLow;
|
|
/** 32-bit unsigned holding this file's size in bytes. */
|
|
uint32_t fileSize;
|
|
} PACKED;
|
|
/**
|
|
* \struct directoryVFATEntry
|
|
* \brief VFAT long filename directory entry
|
|
*
|
|
* directoryVFATEntries are found in the same list as normal directoryEntry.
|
|
* But have the attribute field set to DIR_ATT_LONG_NAME.
|
|
*
|
|
* Long filenames are saved in multiple directoryVFATEntries.
|
|
* Each entry containing 13 UTF-16 characters.
|
|
*/
|
|
struct directoryVFATEntry {
|
|
/**
|
|
* Sequence number. Consists of 2 parts:
|
|
* bit 6: indicates first long filename block for the next file
|
|
* bit 0-4: the position of this long filename block (first block is 1)
|
|
*/
|
|
uint8_t sequenceNumber;
|
|
/** First set of UTF-16 characters */
|
|
uint16_t name1[5];//UTF-16
|
|
/** attributes (at the same location as in directoryEntry), always 0x0F */
|
|
uint8_t attributes;
|
|
/** Reserved for use by Windows NT. Always 0. */
|
|
uint8_t reservedNT;
|
|
/** Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. */
|
|
uint8_t checksum;
|
|
/** Second set of UTF-16 characters */
|
|
uint16_t name2[6];//UTF-16
|
|
/** firstClusterLow is always zero for longFilenames */
|
|
uint16_t firstClusterLow;
|
|
/** Third set of UTF-16 characters */
|
|
uint16_t name3[2];//UTF-16
|
|
} PACKED;
|
|
//------------------------------------------------------------------------------
|
|
// Definitions for directory entries
|
|
//
|
|
/** Type name for directoryEntry */
|
|
typedef struct directoryEntry dir_t;
|
|
/** Type name for directoryVFATEntry */
|
|
typedef struct directoryVFATEntry vfat_t;
|
|
/** escape for name[0] = 0XE5 */
|
|
uint8_t const DIR_NAME_0XE5 = 0X05;
|
|
/** name[0] value for entry that is free after being "deleted" */
|
|
uint8_t const DIR_NAME_DELETED = 0XE5;
|
|
/** name[0] value for entry that is free and no allocated entries follow */
|
|
uint8_t const DIR_NAME_FREE = 0X00;
|
|
/** file is read-only */
|
|
uint8_t const DIR_ATT_READ_ONLY = 0X01;
|
|
/** File should hidden in directory listings */
|
|
uint8_t const DIR_ATT_HIDDEN = 0X02;
|
|
/** Entry is for a system file */
|
|
uint8_t const DIR_ATT_SYSTEM = 0X04;
|
|
/** Directory entry contains the volume label */
|
|
uint8_t const DIR_ATT_VOLUME_ID = 0X08;
|
|
/** Entry is for a directory */
|
|
uint8_t const DIR_ATT_DIRECTORY = 0X10;
|
|
/** Old DOS archive bit for backup support */
|
|
uint8_t const DIR_ATT_ARCHIVE = 0X20;
|
|
/** Test value for long name entry. Test is
|
|
(d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
|
|
uint8_t const DIR_ATT_LONG_NAME = 0X0F;
|
|
/** Test mask for long name entry */
|
|
uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;
|
|
/** defined attribute bits */
|
|
uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;
|
|
/** Directory entry is part of a long name
|
|
* \param[in] dir Pointer to a directory entry.
|
|
*
|
|
* \return true if the entry is for part of a long name else false.
|
|
*/
|
|
static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
|
|
return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
|
|
}
|
|
/** Mask for file/subdirectory tests */
|
|
uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
|
|
/** Directory entry is for a file
|
|
* \param[in] dir Pointer to a directory entry.
|
|
*
|
|
* \return true if the entry is for a normal file else false.
|
|
*/
|
|
static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
|
|
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
|
|
}
|
|
/** Directory entry is for a subdirectory
|
|
* \param[in] dir Pointer to a directory entry.
|
|
*
|
|
* \return true if the entry is for a subdirectory else false.
|
|
*/
|
|
static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
|
|
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
|
|
}
|
|
/** Directory entry is for a file or subdirectory
|
|
* \param[in] dir Pointer to a directory entry.
|
|
*
|
|
* \return true if the entry is for a normal file or subdirectory else false.
|
|
*/
|
|
static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
|
|
return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
|
|
}
|
|
#endif // SdFatStructs_h
|
|
|
|
|
|
#endif
|