mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-01 23:58:33 +00:00
232 lines
7.5 KiB
C
232 lines
7.5 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* RUMBA pin assignments
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega2560__
|
|
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
|
|
#elif HOTENDS > 3 || E_STEPPERS > 3
|
|
#error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue."
|
|
#endif
|
|
|
|
#ifndef BOARD_INFO_NAME
|
|
#define BOARD_INFO_NAME "Rumba"
|
|
#endif
|
|
#ifndef DEFAULT_MACHINE_NAME
|
|
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
|
#endif
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 5
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 37
|
|
#define X_MAX_PIN 36
|
|
#define Y_MIN_PIN 35
|
|
#define Y_MAX_PIN 34
|
|
#define Z_MIN_PIN 33
|
|
#define Z_MAX_PIN 32
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 32
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 17
|
|
#define X_DIR_PIN 16
|
|
#define X_ENABLE_PIN 48
|
|
|
|
#define Y_STEP_PIN 54
|
|
#define Y_DIR_PIN 47
|
|
#define Y_ENABLE_PIN 55
|
|
|
|
#define Z_STEP_PIN 57
|
|
#define Z_DIR_PIN 56
|
|
#define Z_ENABLE_PIN 62
|
|
|
|
#ifndef E0_STEP_PIN
|
|
#define E0_STEP_PIN 23
|
|
#define E0_DIR_PIN 22
|
|
#define E0_ENABLE_PIN 24
|
|
#endif
|
|
|
|
#ifndef E1_STEP_PIN
|
|
#define E1_STEP_PIN 26
|
|
#define E1_DIR_PIN 25
|
|
#define E1_ENABLE_PIN 27
|
|
#endif
|
|
|
|
#if E1_STEP_PIN != 29
|
|
#define E2_STEP_PIN 29
|
|
#define E2_DIR_PIN 28
|
|
#define E2_ENABLE_PIN 39
|
|
#endif
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#ifndef TEMP_0_PIN
|
|
#if TEMP_SENSOR_0 == -1
|
|
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
|
|
#else
|
|
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef TEMP_1_PIN
|
|
#if TEMP_SENSOR_1 == -1
|
|
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
|
|
#else
|
|
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
|
|
#endif
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_2 == -1
|
|
#define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple)
|
|
#else
|
|
#define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
|
|
#endif
|
|
|
|
// Optional for extruder 4 or chamber:
|
|
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
|
|
|
#ifndef TEMP_CHAMBER_PIN
|
|
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_BED == -1
|
|
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
|
|
#else
|
|
#define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used)
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 2
|
|
#define HEATER_1_PIN 3
|
|
#define HEATER_2_PIN 6
|
|
#define HEATER_3_PIN 8
|
|
#define HEATER_BED_PIN 9
|
|
|
|
#ifndef FAN_PIN
|
|
#define FAN_PIN 7
|
|
#endif
|
|
#ifndef FAN1_PIN
|
|
#define FAN1_PIN 8
|
|
#endif
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define LED_PIN 13
|
|
#define PS_ON_PIN 45
|
|
#define KILL_PIN 46
|
|
#define CASE_LIGHT_PIN 45
|
|
|
|
//
|
|
// M3/M4/M5 - Spindle/Laser Control
|
|
//
|
|
#ifndef SPINDLE_LASER_PWM_PIN
|
|
#define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use?
|
|
#endif
|
|
#ifndef SPINDLE_LASER_ENA_PIN
|
|
#define SPINDLE_LASER_ENA_PIN 14 // Pullup!
|
|
#endif
|
|
#ifndef SPINDLE_DIR_PIN
|
|
#define SPINDLE_DIR_PIN 15
|
|
#endif
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
|
#define LCD_PINS_DC 38 // Set as output on init
|
|
#define LCD_PINS_RS 41 // Pull low for 1s to init
|
|
// DOGM SPI LCD Support
|
|
#define DOGLCD_CS 19
|
|
#define DOGLCD_MOSI 42
|
|
#define DOGLCD_SCK 18
|
|
#define DOGLCD_A0 LCD_PINS_DC
|
|
#elif ENABLED(FYSETC_MINI_12864)
|
|
#define DOGLCD_CS 42
|
|
#define DOGLCD_A0 19
|
|
#define DOGLCD_MOSI 51
|
|
#define DOGLCD_SCK 52
|
|
|
|
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
|
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
|
|
|
#define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally.
|
|
|
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
|
#ifndef RGB_LED_R_PIN
|
|
#define RGB_LED_R_PIN 41
|
|
#endif
|
|
#ifndef RGB_LED_G_PIN
|
|
#define RGB_LED_G_PIN 38
|
|
#endif
|
|
#ifndef RGB_LED_B_PIN
|
|
#define RGB_LED_B_PIN 40
|
|
#endif
|
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
#define NEOPIXEL_PIN 25
|
|
#endif
|
|
|
|
#else
|
|
#define LCD_PINS_RS 19
|
|
#define LCD_PINS_ENABLE 42
|
|
#define LCD_PINS_D4 18
|
|
#define LCD_PINS_D5 38
|
|
#define LCD_PINS_D6 41
|
|
#endif
|
|
|
|
#define LCD_PINS_D7 40
|
|
|
|
//
|
|
// Beeper, SD Card, Encoder
|
|
//
|
|
#define BEEPER_PIN 44
|
|
|
|
#if ENABLED(SDSUPPORT)
|
|
#define SDSS 53
|
|
#define SD_DETECT_PIN 49
|
|
#endif
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
#define BTN_EN1 11
|
|
#define BTN_EN2 12
|
|
#define BTN_ENC 43
|
|
#endif
|