mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-25 04:48:31 +00:00
7a377c1d75
Includes: *firmware version / branch / date. *extruder count *board information (name, serial details, power supply type) *thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions.
124 lines
3.1 KiB
C
124 lines
3.1 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Mega controller pin assignments
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega2560__
|
|
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#if EXTRUDERS > 2 || HOTENDS > 2
|
|
#error "Mega Controller supports up to 2 extruders. Comment this line to keep going."
|
|
#endif
|
|
|
|
#define BOARD_NAME "Mega Controller"
|
|
|
|
#define SERVO0_PIN 30
|
|
#define SERVO1_PIN 31
|
|
#define SERVO2_PIN 32
|
|
#define SERVO3_PIN 33
|
|
|
|
#define X_STEP_PIN 62//A8
|
|
#define X_DIR_PIN 63//A9
|
|
#define X_ENABLE_PIN 61//A7
|
|
#define X_MIN_PIN 43
|
|
#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable.
|
|
|
|
#define Y_STEP_PIN 65 // A11
|
|
#define Y_DIR_PIN 66 // A12
|
|
#define Y_ENABLE_PIN 64//A10
|
|
#define Y_MIN_PIN 38
|
|
#define Y_MAX_PIN 41
|
|
|
|
#define Z_STEP_PIN 68 // A14
|
|
#define Z_DIR_PIN 69 // A15
|
|
#define Z_ENABLE_PIN 67 // A13
|
|
#define Z_MIN_PIN 40
|
|
#define Z_MAX_PIN 37
|
|
|
|
#define E0_STEP_PIN 23
|
|
#define E0_DIR_PIN 24
|
|
#define E0_ENABLE_PIN 22
|
|
|
|
#define E1_STEP_PIN 26
|
|
#define E1_DIR_PIN 27
|
|
#define E1_ENABLE_PIN 25
|
|
|
|
#define SDSS 53
|
|
#define LED_PIN 13
|
|
|
|
#define FAN_PIN 39
|
|
#define FAN1_PIN 35
|
|
#define FAN2_PIN 36
|
|
#define FAN_SOFT_PWM
|
|
#define CONTROLLERFAN_PIN FAN2_PIN
|
|
|
|
#define HEATER_0_PIN 29 // EXTRUDER 1
|
|
#define HEATER_1_PIN 34 // EXTRUDER 2
|
|
|
|
#if TEMP_SENSOR_0 == -1
|
|
#define TEMP_0_PIN 4 // ANALOG NUMBERING
|
|
#else
|
|
#define TEMP_0_PIN 0 // ANALOG NUMBERING
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_1 == -1
|
|
#define TEMP_1_PIN 5 // ANALOG NUMBERING
|
|
#else
|
|
#define TEMP_1_PIN 2 // ANALOG NUMBERING
|
|
#endif
|
|
|
|
#define TEMP_2_PIN 3 // ANALOG NUMBERING
|
|
|
|
#define HEATER_BED_PIN 28 // BED
|
|
|
|
#if TEMP_SENSOR_BED == -1
|
|
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
|
|
#else
|
|
#define TEMP_BED_PIN 1 // ANALOG NUMBERING
|
|
#endif
|
|
|
|
#if ENABLED(MINIPANEL)
|
|
#define BEEPER_PIN 46
|
|
// Pins for DOGM SPI LCD Support
|
|
#define DOGLCD_A0 47
|
|
#define DOGLCD_CS 45
|
|
#define LCD_PIN_BL 44 // backlight LED on PA3
|
|
|
|
#define KILL_PIN 12
|
|
// GLCD features
|
|
//#define LCD_CONTRAST 190
|
|
// Uncomment screen orientation
|
|
//#define LCD_SCREEN_ROT_90
|
|
//#define LCD_SCREEN_ROT_180
|
|
//#define LCD_SCREEN_ROT_270
|
|
//The encoder and click button
|
|
#define BTN_EN1 48
|
|
#define BTN_EN2 11
|
|
#define BTN_ENC 10 //the click switch
|
|
//not connected to a pin
|
|
#define SD_DETECT_PIN 49
|
|
#endif //Minipanel
|
|
|