mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-12 21:41:34 +00:00
.. | ||
_Bootscreen.h | ||
Chippy_Bootscreen.h | ||
Configuration_adv.h | ||
Configuration.h | ||
README.md |
Configuration for the Wanhao Duplicator i3 v2.1
Made by Bot-In-a-Box Educational Robotics See original configuration repo
Notes:
- YMMV, but the included thermistor table has been tested to work with a 100k bed thermistor with a 10K pull-up resistor
- The smaller Marlin logo is used to save memory
- You may have a 4.7K pull-up resistor, in which case the included thermistor table will be off
- The included thermistor table was generated with
buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000
- Includes an optional custom Wanhao logo bootscreen designed to fit the stock LCD
- Includes an optional custom Chippy from Bot-In-a-Box bootscreen designed to fit the stock LCD
Inspirations:
- https://www.thingiverse.com/thing:3378807 (Custom firmware 1.x by Nitrogen777)
- https://www.thingiverse.com/thing:3378807 (Custom firmware 2.x by Remotheman)
Instructions:
- Copy the
Configuration.h
,_Bootscreen.h
(orChippy_Bootscreen.h
; rename it_Bootscreen.h
), andConfiguration_adv.h
to theMarlin/ directory
- Copy the
thermistor_99.h
andthermistors.h
files to theMarlin/src/modules/thermistors
directory - Flash the firmware onto your Melzi (https://www.fission3d.com/guides/flash-bootloader-and-install-firmware-with-raspberry-pi might help)