mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-30 23:30:16 +00:00

History

Scott Lahteine 865ee5985f Followup persistent store with heading, const		2018-08-13 23:55:33 -05:00
..
EEPROM_Emul	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
EmulatedEeprom.cpp	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
endstop_interrupts.h	Filter endstops state at all times (#11066 )	2018-06-21 20:14:16 -05:00
fastio_STM32F7.h	HAL FastIO cleanup and fixes	2018-04-26 00:40:16 -05:00
HAL_Servo_STM32F7.cpp	delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index])	2018-05-28 03:44:32 -05:00
HAL_Servo_STM32F7.h
HAL_spi_STM32F7.cpp	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
HAL_timers_STM32F7.cpp	Add memory barrier, optimal interrupt on-off	2018-05-20 02:39:34 -05:00
HAL_timers_STM32F7.h	Fix stepper pulse timing	2018-06-12 21:34:24 -05:00
HAL.cpp	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
HAL.h	Ensure ADC conversion is complete before reading (#11336 )	2018-07-26 03:59:19 -05:00
persistent_store_eeprom.cpp	Followup persistent store with heading, const	2018-08-13 23:55:33 -05:00
pinsDebug.h	Use a macro for HAL header redirection (#10380 )	2018-04-12 20:25:08 -05:00
README.md	Clean up trailing whitespace	2018-01-21 17:19:38 -06:00
SanityCheck.h	Add sanity checks for EMERGENCY_PARSER	2018-04-24 09:24:26 -05:00
spi_pins.h	Define short pin names in fastio for STM32 (#10461 )	2018-04-20 14:54:35 -05:00
TMC2660.cpp	Replace double with float, optimize calculation	2018-07-04 22:28:56 -05:00
TMC2660.h	Fix some spellings	2018-04-02 03:03:37 -05:00
watchdog_STM32F7.cpp
watchdog_STM32F7.h	Fix some header comments	2018-07-17 19:50:24 -05:00

README.md

This HAL is for the STM32F765 board "The Borg" used with STM32Generic Arduino core by danieleff.

Original core is located at:

https://github.com/danieleff/STM32GENERIC

but i have not committed the changes needed for the Borg there yet, so please use:

https://github.com/Spawn32/STM32GENERIC

Unzip it into [Arduino]/hardware folder

Download the latest GNU ARM Embedded Toolchain:

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

(The one in Arduino dosen't support STM32F7).

Change compiler.path in platform.txt to point to that you downloaded.

This HAL is in development.

Currently only tested on "The Borg".

You will also need the latest Arduino 1.9.0-beta or newer.

This HAL is a modified version of Chris Barr's Picoprint STM32F4 HAL, so shouldn't be to hard to get it to work on a F4.