| .. |
|
example_configurations
|
Rename, arrange advanced pause purge options
|
2018-04-09 01:14:07 -05:00 |
|
bitmap_flags.h
|
Parity with 2.0.x bitmap functions
|
2017-11-25 19:56:22 -06:00 |
|
blinkm.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
blinkm.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
boards.h
|
Added support for Einsy Retro
|
2018-04-05 18:15:58 -05:00 |
|
buzzer.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
cardreader.cpp
|
Reset progress bar when print ends
|
2018-04-06 20:12:40 -05:00 |
|
cardreader.h
|
Add C parameter to M27 to get the current filename
|
2018-03-15 22:55:30 -05:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
Z Endstop Servo => Z Probe Servo
|
2018-04-01 23:54:47 -05:00 |
|
Conditionals_post.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
Rename, arrange advanced pause purge options
|
2018-04-09 01:14:07 -05:00 |
|
configuration_store.cpp
|
Add acceleration for filament change, load, unload.
|
2018-04-07 23:14:40 -05:00 |
|
configuration_store.h
|
Tweaks to E2END, mesh slot offset
|
2018-03-10 06:54:18 -06:00 |
|
Configuration.h
|
Update Bed PID config comments
|
2018-04-08 06:46:05 -05:00 |
|
dac_mcp4728.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
dac_mcp4728.h
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
|
digipot_mcp4018.cpp
|
Fix: set digipot mcp4018 Vrefmax to 1.666V
|
2017-06-24 12:35:34 -05:00 |
|
digipot_mcp4451.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
dogm_bitmaps.h
|
Fix compile error with SHOW_BOOTSCREEN disabled
|
2018-02-17 15:39:46 -06:00 |
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
Polish font
|
2017-04-21 21:42:41 -05:00 |
|
dogm_font_data_ISO10646_1_tr.h
|
Improve M600 with timeout, wait for heatup.
|
2017-02-15 05:29:34 -06:00 |
|
dogm_font_data_ISO10646_1.h
|
Fix non-extended font option
|
2017-11-06 21:43:18 -06:00 |
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_CZ.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
dogm_font_data_ISO10646_Greek.h
|
Change font decent to -1 for tt and gr
|
2016-11-26 02:29:23 +01:00 |
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_ISO10646_SK.h
|
Added Slovak C2C3C4 mapper implementation.
|
2017-10-06 14:40:15 -05:00 |
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
duration_t.h
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
endstop_interrupts.h
|
General code/bitmaps cleanup
|
2017-12-13 17:57:54 -06:00 |
|
endstops.cpp
|
Prevent null pointer crash in Endstops::update
|
2018-03-20 04:23:38 -05:00 |
|
endstops.h
|
Move [xyz]_endstop_adj to Endstops class
|
2018-03-10 06:54:18 -06:00 |
|
enum.h
|
Add Continuous Purge feature to Advanced Pause
|
2018-04-04 20:59:50 -05:00 |
|
fastio_168.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_644.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_1280.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_1281.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_AT90USB.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
fwretract.cpp
|
Fix likely issue with retract/recover
|
2018-03-31 22:59:48 -05:00 |
|
fwretract.h
|
[1.1] FWRetract Reset (Best way) (#10084)
|
2018-03-14 01:34:15 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
hex_print_routines.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
hex_print_routines.h
|
Patch hex_print_routines.* include order
|
2018-02-05 17:05:26 -06:00 |
|
I2CPositionEncoder.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
I2CPositionEncoder.h
|
I2C position encoders update
|
2018-02-08 02:46:12 -06:00 |
|
language_an.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_bg.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_ca.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_cn.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_cz_utf8.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_cz.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_da.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_de.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_el-gr.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_el.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_en.h
|
Improve heating/cooling LCD messages (#10296)
|
2018-04-04 19:13:48 -05:00 |
|
language_es_utf8.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_es.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_eu.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_fi.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_fr_utf8.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_fr.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_gl.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_hr.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_it.h
|
[1.1.x] Update language_it.h (#10323)
|
2018-04-06 20:07:08 -05:00 |
|
language_kana_utf8.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_kana.h
|
Size lcd_status_message based on language (#9546)
|
2018-02-08 23:03:27 -06:00 |
|
language_nl.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_pl-DOGM.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_pl-HD44780.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_pl.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_pt_utf8.h
|
Fix some mapper, charsize problems (#9865)
|
2018-02-28 18:56:45 -06:00 |
|
language_pt-br_utf8.h
|
Fix some mapper, charsize problems (#9865)
|
2018-02-28 18:56:45 -06:00 |
|
language_pt-br.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_pt.h
|
Apply feedrate to nozzle movement for kinematic machines
|
2018-02-03 22:17:13 -06:00 |
|
language_ru.h
|
Update language_ru.h (#10311)
|
2018-04-05 00:47:02 -05:00 |
|
language_sk_utf8.h
|
Update Slovak language (#10313)
|
2018-04-06 20:20:40 -05:00 |
|
language_test.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_tr.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_uk.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_zh_CN.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language_zh_TW.h
|
"G28 Z forbidden" => "Home XY first"
|
2018-03-28 21:54:20 -05:00 |
|
language.h
|
Spanish (UTF8) Language (#9785)
|
2018-02-23 20:23:35 -06:00 |
|
least_squares_fit.cpp
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
|
least_squares_fit.h
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
|
leds.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
leds.h
|
Use NEOPIXEL as case light
|
2018-01-20 16:57:04 -06:00 |
|
M100_Free_Mem_Chk.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
macros.h
|
Move _AXIS macro to macros.h
|
2018-03-19 17:59:59 -05:00 |
|
Makefile
|
Added support for Einsy Retro
|
2018-04-05 18:15:58 -05:00 |
|
malyanlcd.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
Marlin_main.cpp
|
Followup to #10177
|
2018-04-09 01:16:51 -05:00 |
|
Marlin.h
|
Appy const to manage_inactivity
|
2018-04-08 23:53:55 -05:00 |
|
Marlin.ino
|
Marlin.ino needs no content
|
2018-02-06 01:09:51 -06:00 |
|
MarlinConfig.h
|
Combine __AVR__ and USBCON for 2.0.x parity
|
2018-03-10 01:51:35 -06:00 |
|
MarlinSerial.cpp
|
Combine __AVR__ and USBCON for 2.0.x parity
|
2018-03-10 01:51:35 -06:00 |
|
MarlinSerial.h
|
Combine __AVR__ and USBCON for 2.0.x parity
|
2018-03-10 01:51:35 -06:00 |
|
MarlinSPI.h
|
Add / use 32-bit wide bit macros
|
2018-02-01 21:47:23 -06:00 |
|
Max7219_Debug_LEDs.cpp
|
Resolve corruption of Max7219 Debug LED Matrix
|
2018-04-08 22:25:11 -05:00 |
|
Max7219_Debug_LEDs.h
|
Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104)
|
2017-10-26 11:44:55 -05:00 |
|
mesh_bed_leveling.cpp
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
|
mesh_bed_leveling.h
|
Make enums into implicit char
|
2018-03-06 23:36:56 -06:00 |
|
neopixel.cpp
|
Make safe_delay available for neopixel startup test
|
2018-02-16 22:25:57 -06:00 |
|
neopixel.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
nozzle.cpp
|
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864)
|
2017-12-24 23:47:05 -06:00 |
|
nozzle.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
parser.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
parser.h
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
pca9632.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
pca9632.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
pins_3DRAG.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_5DPRINT.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ANET_10.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_AZTEEG_X1.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_AZTEEG_X3_PRO.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_AZTEEG_X3.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BAM_DICE_DUE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BRAINWAVE_PRO.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_BRAINWAVE.h
|
removed execution mode from files
|
2018-01-24 00:17:34 -06:00 |
|
pins_CHEAPTRONIC.h
|
Drop unused LARGE_FLASH option
|
2017-11-13 15:47:03 -06:00 |
|
pins_CHEAPTRONICv2.h
|
Pins parity with 2.0.x
|
2018-02-26 01:20:57 -06:00 |
|
pins_CNCONTROLS_11.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_CNCONTROLS_12.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_EINSY_RAMBO.h
|
Added support for Einsy Retro
|
2018-04-05 18:15:58 -05:00 |
|
pins_EINSY_RETRO.h
|
Added support for Einsy Retro
|
2018-04-05 18:15:58 -05:00 |
|
pins_ELEFU_3.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_FELIX2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_MONOLITHIC.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_PLUS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6_DELUXE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6.h
|
Minor patches to pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_GEN7_12.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_13.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_14.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_CUSTOM.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GT2560_REV_A_PLUS.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
|
pins_GT2560_REV_A.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_LEAPFROG.h
|
|
|
|
pins_MAKEBOARD_MINI.h
|
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041)
|
2017-10-21 00:24:22 -05:00 |
|
pins_MEGACONTROLLER.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MEGATRONICS_2.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MEGATRONICS_3.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MEGATRONICS.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MELZI_CREALITY.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MELZI_MAKR3D.h
|
Melzi boards include melzi pins
|
2018-02-10 15:03:20 -06:00 |
|
pins_MELZI_MALYAN.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MELZI_TRONXY.h
|
Easier override of ST7920 LCD timing
|
2018-03-17 02:37:24 -05:00 |
|
pins_MELZI.h
|
Melzi boards include melzi pins
|
2018-02-10 15:03:20 -06:00 |
|
pins_MIGHTYBOARD_REVE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MINIRAMBO.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MINITRONICS.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MKS_13.h
|
MKS 1.3+: Add pin mapping for PS_ON
|
2017-07-21 18:50:05 -05:00 |
|
pins_MKS_BASE_HEROIC.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MKS_BASE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MKS_GEN_L.h
|
Added MKS GEN L board (#8088)
|
2017-10-27 02:13:41 -05:00 |
|
pins_OMCA_A.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_PRINTRBOARD_REVF.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_PRINTRBOARD.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_RAMBO.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_ENDER_4.h
|
Add Creality Ender-4 configurations
|
2018-02-24 22:01:16 -06:00 |
|
pins_RAMPS_OLD.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_RAMPS_PLUS.h
|
Adding support for using the MKS_12864OLED with the SSD1306 controller
|
2017-12-16 17:44:34 -06:00 |
|
pins_RAMPS.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
Need to define this for Rigidboard V2
|
2017-04-30 19:04:27 -05:00 |
|
pins_RIGIDBOARD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_RUMBA.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_SAV_MKI.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SCOOVO_X9H.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SETHI.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SILVER_GATE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_STB_11.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_TEENSY2.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_TEENSYLU.h
|
Pins spacing, 2.0.x parity
|
2018-02-17 21:49:00 -06:00 |
|
pins_TRIGORILLA.h
|
Pins spacing, 2.0.x parity
|
2018-02-17 21:49:00 -06:00 |
|
pins_ULTIMAIN_2.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ULTIMAKER_OLD.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ULTIMAKER.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ZRIB_V20.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
|
pins.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
pinsDebug_list.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
pinsDebug_plus_70.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
|
pinsDebug_Teensyduino.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pinsDebug.h
|
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883)
|
2018-03-01 15:14:08 -06:00 |
|
planner_bezier.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
planner_bezier.h
|
|
|
|
planner.cpp
|
Scale feedrate (mm/s to deg/s) for SCARA
|
2018-04-05 16:17:23 -05:00 |
|
planner.h
|
Scale feedrate (mm/s to deg/s) for SCARA
|
2018-04-05 16:17:23 -05:00 |
|
point_t.h
|
Cleanup Nozzle class, fix XY vs Z move order
|
2017-11-05 18:14:18 -06:00 |
|
power.cpp
|
Consolidate smart stepper driver initialization
|
2018-03-19 22:06:04 -05:00 |
|
power.h
|
Patch Power class
|
2018-02-10 15:36:42 -06:00 |
|
printcounter.cpp
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
printcounter.h
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
runout.cpp
|
Import FilamentRunoutSensor with debounce (#9947)
|
2018-03-05 01:49:19 -06:00 |
|
runout.h
|
Import FilamentRunoutSensor with debounce (#9947)
|
2018-03-05 01:49:19 -06:00 |
|
SanityCheck.h
|
Rename, arrange advanced pause purge options
|
2018-04-09 01:14:07 -05:00 |
|
Sd2Card.cpp
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
Sd2Card.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
SdBaseFile.cpp
|
Use serial macros where possible
|
2018-02-16 17:53:47 -06:00 |
|
SdBaseFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatConfig.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatStructs.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatUtil.cpp
|
Use serial macros where possible
|
2018-02-16 17:53:47 -06:00 |
|
SdFatUtil.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdInfo.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdVolume.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdVolume.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
serial.cpp
|
Use serial macros where possible
|
2018-02-16 17:53:47 -06:00 |
|
serial.h
|
Combine __AVR__ and USBCON for 2.0.x parity
|
2018-03-10 01:51:35 -06:00 |
|
servo.cpp
|
Allow servo.cpp to use safe_delay
|
2018-03-09 03:07:55 -06:00 |
|
servo.h
|
Update servo.* for parity with 2.0.x
|
2018-03-08 19:32:32 -06:00 |
|
softspi.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
speed_lookuptable.h
|
Minimal include for speed_lookuptable
|
2017-12-05 21:44:59 -06:00 |
|
status_screen_DOGM.h
|
Fix LIGHTWEIGHT_UI with UBL
|
2018-04-08 03:11:53 -05:00 |
|
status_screen_lite_ST7920_class.h
|
Improvements to Lightweight ST7920 status screen. (#9960)
|
2018-03-06 01:49:45 -06:00 |
|
status_screen_lite_ST7920_spi.h
|
Lightweight status screen for ST7920
|
2018-02-22 00:46:25 -06:00 |
|
status_screen_lite_ST7920.h
|
When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100)
|
2018-03-14 02:44:41 -05:00 |
|
stepper_dac.cpp
|
Move some strings to PROGMEM
|
2018-01-23 23:50:42 -06:00 |
|
stepper_dac.h
|
Apply const to axis args
|
2017-12-11 00:20:29 -06:00 |
|
stepper_indirection.cpp
|
Default active low for TMC2130 DIAG1 (#10294)
|
2018-04-05 18:15:58 -05:00 |
|
stepper_indirection.h
|
Consolidate smart stepper driver initialization
|
2018-03-19 22:06:04 -05:00 |
|
stepper.cpp
|
Output ABC for delta stepper counts
|
2018-03-31 20:12:53 -05:00 |
|
stepper.h
|
Fix LA_active_extruder (static)
|
2018-03-07 05:50:35 -06:00 |
|
stopwatch.cpp
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
stopwatch.h
|
Make enums into implicit char
|
2018-03-06 23:36:56 -06:00 |
|
temperature.cpp
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
temperature.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
thermistornames.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_1.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_2.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_3.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_4.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_5.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_6.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_7.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_8.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_9.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_10.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_11.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_12.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_13.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_15.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
|
thermistortable_20.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
thermistortable_51.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_52.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_55.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_60.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_66.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_70.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_71.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_75.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_110.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_998.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_999.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_1010.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1047.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortables.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
tmc_util.cpp
|
Use pgm_read_ptr for tables of pointers
|
2018-03-23 02:17:51 -04:00 |
|
tmc_util.h
|
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
|
2018-03-19 22:06:04 -05:00 |
|
twibus.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
twibus.h
|
Clean up some trailing spaces
|
2017-07-01 22:32:20 -05:00 |
|
types.h
|
Fix types.h dependency
|
2018-02-25 22:01:01 -06:00 |
|
ubl_G29.cpp
|
Automatically reset stepper timeout in manage_inactivity
|
2018-03-21 19:08:02 -05:00 |
|
ubl_motion.cpp
|
Fix typo in ubl.prepare_segmented_line_to
|
2018-03-11 10:22:52 -05:00 |
|
ubl.cpp
|
Also suspend keepalive messages with suspend_auto_report
|
2018-03-21 00:26:00 -05:00 |
|
ubl.h
|
Fix LA_active_extruder (static)
|
2018-03-07 05:50:35 -06:00 |
|
ultralcd_impl_DOGM.h
|
Fix LIGHTWEIGHT_UI with UBL
|
2018-04-08 03:11:53 -05:00 |
|
ultralcd_impl_HD44780.h
|
Use lcd_printPGM_utf in more places
|
2018-03-31 20:47:20 -05:00 |
|
ultralcd_st7565_u8glib_VIKI.h
|
Fix VIKI2 hardware SPI compatibility (#9642)
|
2018-02-16 02:28:42 -06:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Lightweight status screen for ST7920
|
2018-02-22 00:46:25 -06:00 |
|
ultralcd.cpp
|
Add Continuous Purge feature to Advanced Pause
|
2018-04-04 20:59:50 -05:00 |
|
ultralcd.h
|
Fix BTN_BACK
|
2018-02-28 03:27:36 -06:00 |
|
utf_mapper.h
|
Tweak spacing in utf8_mapper.h
|
2017-10-06 15:11:27 -05:00 |
|
utility.cpp
|
Patch utility for debug-leveling
|
2018-02-07 22:43:51 -06:00 |
|
utility.h
|
Fix: utility.h requires types.h
|
2018-03-09 03:33:25 -06:00 |
|
vector_3.cpp
|
Fix matrix.debug output
|
2018-03-18 20:03:34 -05:00 |
|
vector_3.h
|
Add a struct defining EEPROM storage
|
2018-01-05 15:47:51 -06:00 |
|
Version.h
|
Date refresh
|
2018-01-20 09:17:00 -06:00 |
|
watchdog.cpp
|
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
|
2017-11-03 04:45:13 +01:00 |
|
watchdog.h
|
|
|
