1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-14 14:31:33 +00:00
MarlinFirmware/Marlin/src/lcd/extui/lib/mks_ui/draw_operation.cpp
2020-10-24 17:28:31 -05:00

245 lines
8.7 KiB
C++

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../../inc/MarlinConfigPre.h"
#if HAS_TFT_LVGL_UI
#include "draw_ui.h"
#include <lv_conf.h>
//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
//#include "../lvgl/src/lv_objx/lv_img.h"
//#include "../lvgl/src/lv_core/lv_disp.h"
//#include "../lvgl/src/lv_core/lv_refr.h"
#include "../../../../module/temperature.h"
#include "../../../../module/motion.h"
#include "../../../../sd/cardreader.h"
#include "../../../../inc/MarlinConfig.h"
extern lv_group_t *g;
static lv_obj_t *scr;
enum {
ID_O_PRE_HEAT = 1,
ID_O_EXTRUCT,
ID_O_MOV,
ID_O_FILAMENT,
ID_O_SPEED,
ID_O_RETURN,
ID_O_FAN,
ID_O_POWER_OFF,
ID_O_BABY_STEP
};
static lv_obj_t *label_PowerOff;
static lv_obj_t *buttonPowerOff;
extern feedRate_t feedrate_mm_s;
static void event_handler(lv_obj_t *obj, lv_event_t event) {
if (event != LV_EVENT_RELEASED) return;
switch (obj->mks_obj_id) {
case ID_O_PRE_HEAT:
lv_clear_operation();
lv_draw_preHeat();
break;
case ID_O_EXTRUCT:
lv_clear_operation();
lv_draw_extrusion();
break;
case ID_O_MOV:
lv_clear_operation();
lv_draw_move_motor();
break;
case ID_O_FILAMENT:
#if HAS_MULTI_EXTRUDER
uiCfg.curSprayerChoose_bak = active_extruder;
#endif
if (uiCfg.print_state == WORKING) {
#if ENABLED(SDSUPPORT)
card.pauseSDPrint();
stop_print_time();
uiCfg.print_state = PAUSING;
#endif
}
uiCfg.moveSpeed_bak = (uint16_t)feedrate_mm_s;
uiCfg.desireSprayerTempBak = thermalManager.temp_hotend[active_extruder].target;
lv_clear_operation();
lv_draw_filament_change();
break;
case ID_O_FAN:
lv_clear_operation();
lv_draw_fan();
break;
case ID_O_SPEED:
lv_clear_operation();
lv_draw_change_speed();
break;
case ID_O_RETURN:
clear_cur_ui();
draw_return_ui();
break;
case ID_O_POWER_OFF:
if (gCfgItems.finish_power_off) {
gCfgItems.finish_power_off = false;
lv_imgbtn_set_src_both(buttonPowerOff, "F:/bmp_manual_off.bin");
lv_label_set_text(label_PowerOff, printing_more_menu.manual);
}
else {
gCfgItems.finish_power_off = true;
lv_imgbtn_set_src_both(buttonPowerOff, "F:/bmp_auto_off.bin");
lv_label_set_text(label_PowerOff, printing_more_menu.auto_close);
}
lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
lv_obj_refresh_ext_draw_pad(label_PowerOff);
update_spi_flash();
break;
case ID_O_BABY_STEP:
lv_clear_operation();
lv_draw_baby_stepping();
break;
}
}
void lv_draw_operation(void) {
lv_obj_t *buttonExtrusion = nullptr, *buttonSpeed = nullptr,
*buttonBack = nullptr,
*labelPreHeat = nullptr, *labelExtrusion = nullptr,
*label_Back = nullptr, *label_Speed = nullptr, *label_Fan = nullptr,
*buttonMove = nullptr, *label_Move = nullptr,
*buttonBabyStep = nullptr, *label_BabyStep = nullptr,
*label_Filament = nullptr;
scr = lv_screen_create(OPERATE_UI);
// Create image buttons
lv_obj_t *buttonPreHeat = lv_imgbtn_create(scr, "F:/bmp_temp.bin", INTERVAL_V, titleHeight, event_handler, ID_O_PRE_HEAT);
lv_obj_t *buttonFilament = lv_imgbtn_create(scr, "F:/bmp_filamentchange.bin", BTN_X_PIXEL + INTERVAL_V * 2, titleHeight, event_handler, ID_O_FILAMENT);
lv_obj_t *buttonFan = lv_imgbtn_create(scr, "F:/bmp_fan.bin", BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight, event_handler, ID_O_FAN);
buttonPowerOff = lv_imgbtn_create(scr, gCfgItems.finish_power_off ? "F:/bmp_auto_off.bin" : "F:/bmp_manual_off.bin", BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight, event_handler, ID_O_POWER_OFF);
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) {
lv_group_add_obj(g, buttonPreHeat);
lv_group_add_obj(g, buttonFilament);
lv_group_add_obj(g, buttonFan);
lv_group_add_obj(g, buttonPowerOff);
}
#endif
if (uiCfg.print_state != WORKING) {
buttonExtrusion = lv_imgbtn_create(scr, "F:/bmp_extrude_opr.bin", INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_O_EXTRUCT);
buttonMove = lv_imgbtn_create(scr, "F:/bmp_move_opr.bin", BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_O_MOV);
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) {
lv_group_add_obj(g, buttonExtrusion);
lv_group_add_obj(g, buttonMove);
}
#endif
}
else {
buttonSpeed = lv_imgbtn_create(scr, "F:/bmp_speed.bin", INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_O_SPEED);
buttonBabyStep = lv_imgbtn_create(scr, "F:/bmp_mov.bin", BTN_X_PIXEL + INTERVAL_V * 2, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_O_BABY_STEP);
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) {
lv_group_add_obj(g, buttonSpeed);
lv_group_add_obj(g, buttonBabyStep);
}
#endif
}
buttonBack = lv_imgbtn_create(scr, "F:/bmp_return.bin", BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_O_RETURN);
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) lv_group_add_obj(g, buttonBack);
#endif
// Create labels on the image buttons
labelPreHeat = lv_label_create_empty(buttonPreHeat);
label_Filament = lv_label_create_empty(buttonFilament);
label_Fan = lv_label_create_empty(buttonFan);
label_PowerOff = lv_label_create_empty(buttonPowerOff);
if (uiCfg.print_state != WORKING) {
/*
label_Filament = lv_label_create_empty(buttonFilament);
} else {
*/
labelExtrusion = lv_label_create_empty(buttonExtrusion);
label_Move = lv_label_create_empty(buttonMove);
}
else {
label_Speed = lv_label_create_empty(buttonSpeed);
label_BabyStep = lv_label_create_empty(buttonBabyStep);
}
label_Back = lv_label_create_empty(buttonBack);
if (gCfgItems.multiple_language) {
lv_label_set_text(labelPreHeat, operation_menu.temp);
lv_obj_align(labelPreHeat, buttonPreHeat, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
lv_label_set_text(label_Filament, operation_menu.filament);
lv_obj_align(label_Filament, buttonFilament, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
lv_label_set_text(label_Fan, operation_menu.fan);
lv_obj_align(label_Fan, buttonFan, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
if (gCfgItems.finish_power_off)
lv_label_set_text(label_PowerOff, printing_more_menu.auto_close);
else
lv_label_set_text(label_PowerOff, printing_more_menu.manual);
lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
if (uiCfg.print_state != WORKING) {
/*
lv_label_set_text(label_Filament, operation_menu.filament);
lv_obj_align(label_Filament, buttonFilament, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
} else {
*/
lv_label_set_text(labelExtrusion, operation_menu.extr);
lv_obj_align(labelExtrusion, buttonExtrusion, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
lv_label_set_text(label_Move, operation_menu.move);
lv_obj_align(label_Move, buttonMove, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
}
else {
lv_label_set_text(label_Speed, operation_menu.speed);
lv_obj_align(label_Speed, buttonSpeed, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
lv_label_set_text(label_BabyStep, operation_menu.babystep);
lv_obj_align(label_BabyStep, buttonBabyStep, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
}
lv_label_set_text(label_Back, common_menu.text_back);
lv_obj_align(label_Back, buttonBack, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
}
}
void lv_clear_operation() {
#if HAS_ROTARY_ENCODER
if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
#endif
lv_obj_del(scr);
}
#endif // HAS_TFT_LVGL_UI