mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-18 00:07:50 +00:00
222 lines
8.9 KiB
ArmAsm
222 lines
8.9 KiB
ArmAsm
/* File: startup_ARMCM3.s
|
|
* Purpose: startup file for Cortex-M3/M4 devices. Should use with
|
|
* GNU Tools for ARM Embedded Processors
|
|
* Version: V1.1
|
|
* Date: 17 June 2011
|
|
*
|
|
* Copyright (C) 2011 ARM Limited. All rights reserved.
|
|
* ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4
|
|
* processor based microcontrollers. This file can be freely distributed
|
|
* within development tools that are supporting such ARM based processors.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
|
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
|
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
|
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
*/
|
|
.syntax unified
|
|
.arch armv7-m
|
|
|
|
/* Memory Model
|
|
The HEAP starts at the end of the DATA section and grows upward.
|
|
|
|
The STACK starts at the end of the RAM and grows downward.
|
|
|
|
The HEAP and stack STACK are only checked at compile time:
|
|
(DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
|
|
|
|
This is just a check for the bare minimum for the Heap+Stack area before
|
|
aborting compilation, it is not the run time limit:
|
|
Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
|
|
*/
|
|
.section .stack
|
|
.align 3
|
|
#ifdef __STACK_SIZE
|
|
.equ Stack_Size, __STACK_SIZE
|
|
#else
|
|
.equ Stack_Size, 0xc00
|
|
#endif
|
|
.globl __StackTop
|
|
.globl __StackLimit
|
|
__StackLimit:
|
|
.space Stack_Size
|
|
.size __StackLimit, . - __StackLimit
|
|
__StackTop:
|
|
.size __StackTop, . - __StackTop
|
|
|
|
.section .heap
|
|
.align 3
|
|
#ifdef __HEAP_SIZE
|
|
.equ Heap_Size, __HEAP_SIZE
|
|
#else
|
|
.equ Heap_Size, 0x800
|
|
#endif
|
|
.globl __HeapBase
|
|
.globl __HeapLimit
|
|
__HeapBase:
|
|
.space Heap_Size
|
|
.size __HeapBase, . - __HeapBase
|
|
__HeapLimit:
|
|
.size __HeapLimit, . - __HeapLimit
|
|
|
|
.section .isr_vector
|
|
.align 2
|
|
.globl __isr_vector
|
|
__isr_vector:
|
|
.long __StackTop /* Top of Stack */
|
|
.long Reset_Handler /* Reset Handler */
|
|
.long NMI_Handler /* NMI Handler */
|
|
.long HardFault_Handler /* Hard Fault Handler */
|
|
.long MemManage_Handler /* MPU Fault Handler */
|
|
.long BusFault_Handler /* Bus Fault Handler */
|
|
.long UsageFault_Handler /* Usage Fault Handler */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long 0 /* Reserved */
|
|
.long SVC_Handler /* SVCall Handler */
|
|
.long DebugMon_Handler /* Debug Monitor Handler */
|
|
.long 0 /* Reserved */
|
|
.long PendSV_Handler /* PendSV Handler */
|
|
.long SysTick_Handler /* SysTick Handler */
|
|
|
|
/* External interrupts */
|
|
.long WDT_IRQHandler /* 16: Watchdog Timer */
|
|
.long TIMER0_IRQHandler /* 17: Timer0 */
|
|
.long TIMER1_IRQHandler /* 18: Timer1 */
|
|
.long TIMER2_IRQHandler /* 19: Timer2 */
|
|
.long TIMER3_IRQHandler /* 20: Timer3 */
|
|
.long UART0_IRQHandler /* 21: UART0 */
|
|
.long UART1_IRQHandler /* 22: UART1 */
|
|
.long UART2_IRQHandler /* 23: UART2 */
|
|
.long UART3_IRQHandler /* 24: UART3 */
|
|
.long PWM1_IRQHandler /* 25: PWM1 */
|
|
.long I2C0_IRQHandler /* 26: I2C0 */
|
|
.long I2C1_IRQHandler /* 27: I2C1 */
|
|
.long I2C2_IRQHandler /* 28: I2C2 */
|
|
.long SPI_IRQHandler /* 29: SPI */
|
|
.long SSP0_IRQHandler /* 30: SSP0 */
|
|
.long SSP1_IRQHandler /* 31: SSP1 */
|
|
.long PLL0_IRQHandler /* 32: PLL0 Lock (Main PLL) */
|
|
.long RTC_IRQHandler /* 33: Real Time Clock */
|
|
.long EINT0_IRQHandler /* 34: External Interrupt 0 */
|
|
.long EINT1_IRQHandler /* 35: External Interrupt 1 */
|
|
.long EINT2_IRQHandler /* 36: External Interrupt 2 */
|
|
.long EINT3_IRQHandler /* 37: External Interrupt 3 */
|
|
.long ADC_IRQHandler /* 38: A/D Converter */
|
|
.long BOD_IRQHandler /* 39: Brown-Out Detect */
|
|
.long USB_IRQHandler /* 40: USB */
|
|
.long CAN_IRQHandler /* 41: CAN */
|
|
.long DMA_IRQHandler /* 42: General Purpose DMA */
|
|
.long I2S_IRQHandler /* 43: I2S */
|
|
.long ENET_IRQHandler /* 44: Ethernet */
|
|
.long RIT_IRQHandler /* 45: Repetitive Interrupt Timer */
|
|
.long MCPWM_IRQHandler /* 46: Motor Control PWM */
|
|
.long QEI_IRQHandler /* 47: Quadrature Encoder Interface */
|
|
.long PLL1_IRQHandler /* 48: PLL1 Lock (USB PLL) */
|
|
.long USBActivity_IRQHandler /* 49: USB Activity */
|
|
.long CANActivity_IRQHandler /* 50: CAN Activity */
|
|
|
|
.size __isr_vector, . - __isr_vector
|
|
|
|
.text
|
|
.thumb
|
|
.thumb_func
|
|
.align 2
|
|
.globl Reset_Handler
|
|
.type Reset_Handler, %function
|
|
Reset_Handler:
|
|
/* Loop to copy data from read only memory to RAM. The ranges
|
|
* of copy from/to are specified by following symbols evaluated in
|
|
* linker script.
|
|
* _etext: End of code section, i.e., begin of data sections to copy from.
|
|
* __data_start__/__data_end__: RAM address range that data should be
|
|
* copied to. Both must be aligned to 4 bytes boundary. */
|
|
|
|
ldr r1, =__etext
|
|
ldr r2, =__data_start__
|
|
ldr r3, =__data_end__
|
|
|
|
.flash_to_ram_loop:
|
|
cmp r2, r3
|
|
ittt lt
|
|
ldrlt r0, [r1], #4
|
|
strlt r0, [r2], #4
|
|
blt .flash_to_ram_loop
|
|
|
|
ldr r0, =SystemInit
|
|
blx r0
|
|
ldr r0, =SystemPostInit
|
|
blx r0
|
|
ldr r0, =_start
|
|
bx r0
|
|
.pool
|
|
.size Reset_Handler, . - Reset_Handler
|
|
|
|
/* Macro to define default handlers. Default handler
|
|
* will be weak symbol and just dead loops. They can be
|
|
* overwritten by other handlers */
|
|
.macro def_default_handler handler_name
|
|
.align 1
|
|
.thumb_func
|
|
.weak \handler_name
|
|
.type \handler_name, %function
|
|
\handler_name :
|
|
b .
|
|
.size \handler_name, . - \handler_name
|
|
.endm
|
|
|
|
def_default_handler NMI_Handler
|
|
def_default_handler HardFault_Handler
|
|
def_default_handler MemManage_Handler
|
|
def_default_handler BusFault_Handler
|
|
def_default_handler UsageFault_Handler
|
|
def_default_handler SVC_Handler
|
|
def_default_handler DebugMon_Handler
|
|
def_default_handler PendSV_Handler
|
|
def_default_handler SysTick_Handler
|
|
def_default_handler Default_Handler
|
|
|
|
def_default_handler WDT_IRQHandler
|
|
def_default_handler TIMER0_IRQHandler
|
|
def_default_handler TIMER1_IRQHandler
|
|
def_default_handler TIMER2_IRQHandler
|
|
def_default_handler TIMER3_IRQHandler
|
|
def_default_handler UART0_IRQHandler
|
|
def_default_handler UART1_IRQHandler
|
|
def_default_handler UART2_IRQHandler
|
|
def_default_handler UART3_IRQHandler
|
|
def_default_handler PWM1_IRQHandler
|
|
def_default_handler I2C0_IRQHandler
|
|
def_default_handler I2C1_IRQHandler
|
|
def_default_handler I2C2_IRQHandler
|
|
def_default_handler SPI_IRQHandler
|
|
def_default_handler SSP0_IRQHandler
|
|
def_default_handler SSP1_IRQHandler
|
|
def_default_handler PLL0_IRQHandler
|
|
def_default_handler RTC_IRQHandler
|
|
def_default_handler EINT0_IRQHandler
|
|
def_default_handler EINT1_IRQHandler
|
|
def_default_handler EINT2_IRQHandler
|
|
def_default_handler EINT3_IRQHandler
|
|
def_default_handler ADC_IRQHandler
|
|
def_default_handler BOD_IRQHandler
|
|
def_default_handler USB_IRQHandler
|
|
def_default_handler CAN_IRQHandler
|
|
def_default_handler DMA_IRQHandler
|
|
def_default_handler I2S_IRQHandler
|
|
def_default_handler ENET_IRQHandler
|
|
def_default_handler RIT_IRQHandler
|
|
def_default_handler MCPWM_IRQHandler
|
|
def_default_handler QEI_IRQHandler
|
|
def_default_handler PLL1_IRQHandler
|
|
def_default_handler USBActivity_IRQHandler
|
|
def_default_handler CANActivity_IRQHandler
|
|
|
|
.weak DEF_IRQHandler
|
|
.set DEF_IRQHandler, Default_Handler
|
|
|
|
.end
|
|
|