Scott Lahteine 3220c49f1b Add a test for SAVED_POSITIONS		2021-05-22 16:18:42 -05:00
..
.gitattributes
ARMED	Extend M106/M107 for better laser module support (#16082)	2021-03-24 12:21:11 -05:00
at90usb1286_cdc
at90usb1286_dfu
BIGTREE_BTT002
BIGTREE_GTR_V1_0	Tool sensors (#17239)	2021-04-16 08:02:31 -05:00
BIGTREE_GTR_V1_0_usb_flash_drive
BIGTREE_SKR_PRO	Suppress redundant serial errors	2021-04-03 20:33:11 -05:00
BTT_SKR_SE_BX	BTT SKR-SE-BX (STM32H743IIT6 ARM Cortex M7) and BIQU_BX_TFT70 (#21536)	2021-04-05 21:40:50 -05:00
chitu_f103	Rename, clean up boards/variants (#21655)	2021-04-27 04:49:21 -05:00
DUE	Tweak tests, consolidate pins target validation (#21254)	2021-03-05 04:30:52 -06:00
DUE_archim
esp32
FLYF407ZG
FYSETC_F6	UBL Mesh Wizard (#21556, #21791)	2021-05-15 15:05:52 -05:00
FYSETC_S6	Update MEATPACK test	2021-03-10 13:45:53 -06:00
jgaurora_a5s_a1
LERDGEK	Lerdge K EEPROM and TFT (#21812)	2021-05-15 15:05:53 -05:00
LERDGEX
linux_native
LPC1768	Support a third serial port (#21784)	2021-05-15 15:05:53 -05:00
LPC1769	Check NOZZLE_CLEAN_FEATURE settings (#21332)	2021-03-23 01:47:07 -05:00
malyan_M300
mega1280
mega2560	Add a test for SAVED_POSITIONS	2021-05-22 16:18:42 -05:00
mks_robin
mks_robin_lite
mks_robin_mini
mks_robin_nano35
mks_robin_nano35_stm32
mks_robin_pro
mks_robin_stm32
NUCLEO_F767ZI
rambo	✅ Fix tests for EXTRUDERS 0	2021-05-22 16:08:26 -05:00
REMRAM_V1
rumba32
SAMD51_grandcentral_m4
sanguino644p
sanguino1284p
STM32F070CB_malyan
STM32F070RB_malyan
STM32F103CB_malyan
STM32F103RC_btt
STM32F103RC_btt_stm32	BTT SKR Mini E3 for HAL/STM32 (#21488)	2021-05-15 15:05:53 -05:00
STM32F103RC_btt_USB
STM32F103RC_btt_USB_stm32	BTT SKR Mini E3 for HAL/STM32 (#21488)	2021-05-15 15:05:53 -05:00
STM32F103RC_fysetc
STM32F103RC_meeb
STM32F103RE	Check NOZZLE_CLEAN_FEATURE settings (#21332)	2021-03-23 01:47:07 -05:00
STM32F103RE_btt
STM32F103RE_btt_USB
STM32F103RET6_creality	E3V2 DWIN Advanced Settings (#21534)	2021-04-24 18:50:44 -05:00
STM32F103VE_longer
STM32F401VE_STEVAL
STM32F407VE_black
teensy31
teensy35	Backlash Compensation for COREnn (#21612)	2021-04-24 04:38:00 -05:00
teensy41	Check NOZZLE_CLEAN_FEATURE settings (#21332)	2021-03-23 01:47:07 -05:00