1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-18 00:07:50 +00:00
MarlinFirmware/ini/stm32g0.ini
2022-06-05 23:11:32 -05:00

49 lines
1.6 KiB
INI

#
# Marlin Firmware
# PlatformIO Configuration File
#
#################################
#
# STM32G0 Architecture
#
# Naming Example: STM32G0B1RET6
#
# G : Foundation
# 0 : Cortex M0+ core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
# B1 : Line/Features
# R : 64 pins (R:64 or 66, F:20)
# E : 512KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB)
# T : LQFP package
# 6 : -40...85°C (7: ...105°C)
#
#################################
#
# BigTree SKR mini E3 V3.0 (STM32G0B1RET6 ARM Cortex-M0+)
#
[env:STM32G0B1RE_btt]
extends = stm32_variant
platform = ststm32@~14.1.0
platform_packages = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
board = marlin_STM32G0B1RE
board_build.offset = 0x2000
board_upload.offset_address = 0x08002000
build_flags = ${stm32_variant.build_flags}
-DPIN_SERIAL4_RX=PC_11 -DPIN_SERIAL4_TX=PC_10
-DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
-DTIMER_SERVO=TIM3 -DTIMER_TONE=TIM4
-DSTEP_TIMER_IRQ_PRIO=0
upload_protocol = stlink
debug_tool = stlink
#
# Custom upload to SD via Marlin with Binary Protocol
#
[env:STM32G0B1RE_btt_xfer]
extends = env:STM32G0B1RE_btt
build_flags = ${env:STM32G0B1RE_btt.build_flags} -DXFER_BUILD
extra_scripts = ${env:STM32G0B1RE_btt.extra_scripts}
pre:buildroot/share/scripts/upload.py
upload_protocol = custom