1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-13 14:01:52 +00:00
MarlinFirmware/Marlin/src/pins/pins_5DPRINT.h
2019-04-08 23:10:45 -05:00

148 lines
4.3 KiB
C
Executable File

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Rev B 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools > Board' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools > Board' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
/**
* 5DPrint D8 Driver board pin assignments
*
* https://bitbucket.org/makible/5dprint-d8-controller-board
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Select 'Teensy++ 2.0' or 'Printrboard' in 'Tools > Board.'"
#endif
#define DEFAULT_MACHINE_NAME "Makibox"
#define BOARD_NAME "5DPrint D8"
//
// Servos
//
#define SERVO0_PIN 41
#define SERVO1_PIN 42
#define SERVO2_PIN 43
#define SERVO3_PIN 44
//
// Limit Switches
//
#define X_STOP_PIN 37 // E5
#define Y_STOP_PIN 36 // E4
#define Z_STOP_PIN 19 // E7
//
// Steppers
//
#define X_STEP_PIN 28 // A0
#define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 17 // C7
#define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 13 // C3
#define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 12 // C2
#define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 11 // C1
//
// Digital Microstepping
//
#define X_MS1_PIN 25 // B5
#define X_MS2_PIN 26 // B6
#define Y_MS1_PIN 9 // E1
#define Y_MS2_PIN 8 // E0
#define Z_MS1_PIN 7 // D7
#define Z_MS2_PIN 6 // D6
#define E0_MS1_PIN 5 // D5
#define E0_MS2_PIN 4 // D4
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // F1 Analog Input
#define TEMP_BED_PIN 0 // F0 Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 15 // C5
#define HEATER_BED_PIN 14 // C4
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions
//
#define SDSS 20 // B0
//DIGIPOTS slave addresses
#ifndef DIGIPOT_I2C_ADDRESS_A
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)
#endif