mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 20:18:52 +00:00
97 lines
3.1 KiB
Bash
Executable File
97 lines
3.1 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
# exit on first failure
|
|
set -e
|
|
|
|
restore_configs
|
|
opt_set MOTHERBOARD BOARD_TEENSY35_36
|
|
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
|
|
#
|
|
# Test Teensy3.5 with default config
|
|
#
|
|
exec_test $1 $2 "Teensy3.5 with default config"
|
|
#
|
|
# Test as many features together as possible
|
|
#
|
|
restore_configs
|
|
opt_set EXTRUDERS 2
|
|
opt_set TEMP_SENSOR_0 1
|
|
opt_set TEMP_SENSOR_1 5
|
|
opt_set TEMP_SENSOR_BED 1
|
|
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
|
|
opt_enable FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY
|
|
opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
|
|
opt_enable BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY
|
|
opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER
|
|
opt_enable_adv ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE
|
|
opt_set_adv I2C_SLAVE_ADDRESS 63
|
|
opt_set GRID_MAX_POINTS_X 16
|
|
exec_test $1 $2 "As many features together as possible"
|
|
#
|
|
# Test a Sled Z Probe with Linear leveling
|
|
#
|
|
restore_configs
|
|
opt_enable Z_PROBE_SLED
|
|
opt_enable AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
|
exec_test $1 $2 "Sled Z Probe with Linear leveling"
|
|
#
|
|
# Test a Servo Probe
|
|
#
|
|
restore_configs
|
|
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
|
|
opt_set NUM_SERVOS 1
|
|
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
|
exec_test $1 $2 "Servo Probe"
|
|
#
|
|
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
|
|
#
|
|
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
|
|
opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
|
|
exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
|
|
#
|
|
# Test MESH_BED_LEVELING feature, with LCD
|
|
#
|
|
restore_configs
|
|
opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
|
|
exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
|
|
#
|
|
# Mixing Extruder
|
|
#
|
|
restore_configs
|
|
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1
|
|
opt_set MIXING_STEPPERS 2
|
|
exec_test $1 $2 "Mixing Extruder"
|
|
#
|
|
# Test SWITCHING_EXTRUDER
|
|
#
|
|
restore_configs
|
|
opt_set EXTRUDERS 2
|
|
opt_enable NUM_SERVOS
|
|
opt_set NUM_SERVOS 1
|
|
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
|
|
exec_test $1 $2 "SWITCHING_EXTRUDER"
|
|
#
|
|
# Enable COREXY
|
|
#
|
|
restore_configs
|
|
opt_enable COREXY
|
|
exec_test $1 $2 "COREXY"
|
|
#
|
|
# Enable COREXZ
|
|
#
|
|
restore_configs
|
|
opt_enable COREXZ
|
|
exec_test $1 $2 "COREXZ"
|
|
#
|
|
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
|
#
|
|
restore_configs
|
|
opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
|
pins_set RAMPS X_MAX_PIN -1
|
|
opt_add_adv Z2_MAX_PIN 2
|
|
opt_enable USE_XMAX_PLUG
|
|
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
|
|
|
|
#cleanup
|
|
restore_configs
|