1
0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-05 18:33:29 +00:00
MarlinFirmware/ini/stm32f1.ini
2022-06-30 22:00:52 -05:00

438 lines
14 KiB
INI

#
# Marlin Firmware
# PlatformIO Configuration File
#
#################################
#
# STM32F1 Architecture with unified STM32 HAL
#
# Naming Example: STM32F103RCT6
#
# F : Foundation (sometimes High Performance F2/F4)
# 1 : Cortex M3 core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
# 03 : Line/Features
# R : 64 or 66 pins (T:36, C:48, V:100, Z:144, I:176)
# C : 256KB Flash-memory (B: 128KB, D:384KB, E:512KB, G:1024KB)
# T : LQFP package
# 6 : -40...85°C (7: ...105°C)
#
#################################
[common_STM32F103RC_variant]
extends = stm32_variant
board = genericSTM32F103RC
board_build.variant = MARLIN_F103Rx
build_flags = ${stm32_variant.build_flags} -DDEBUG_LEVEL=0
monitor_speed = 115200
#
# STM32F103RE
#
[env:STM32F103RE]
extends = common_stm32
board = genericSTM32F103RE
monitor_speed = 115200
#
# STM32F103VE
#
[env:STM32F103VE]
extends = common_stm32
board = genericSTM32F103VE
monitor_speed = 115200
#
# STM32F103ZE
#
[env:STM32F103ZE]
extends = common_stm32
board = genericSTM32F103ZE
monitor_speed = 115200
#
# BigTree SKR Mini V1.1 / SKR Mini E3 & MZ (STM32F103RCT6 ARM Cortex-M3)
#
# STM32F103RC_btt ............. RCT6 with 256K
# STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
#
[env:STM32F103RC_btt]
extends = common_STM32F103RC_variant
build_flags = ${common_STM32F103RC_variant.build_flags}
-DTIMER_SERVO=TIM5
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
[env:STM32F103RC_btt_USB]
extends = env:STM32F103RC_btt
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${env:STM32F103RC_btt.build_flags}
-DUSE_USB_FS
-DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6
-DUSBD_USE_CDC_MSC
build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC
#
# Panda Pi V2.9 - Standalone (STM32F103RC)
# Headless, without direct Pi control, but potentially hosting OctoPrint, stepdaemon, etc.
#
[env:PANDA_PI_V29]
extends = common_STM32F103RC_variant
build_flags = ${common_STM32F103RC_variant.build_flags}
-DTIMER_SERVO=TIM1
board_build.offset = 0x5000
board_upload.offset_address = 0x08005000
#
# MKS Robin (STM32F103ZET6)
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
#
[env:mks_robin]
extends = stm32_variant
board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
board_build.encrypt_mks = Robin.bin
board_build.offset = 0x7000
build_flags = ${stm32_variant.build_flags}
-DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
#
# MKS Robin E3/E3D (STM32F103RCT6) with TMC2209
#
[env:mks_robin_e3]
extends = common_STM32F103RC_variant
board_build.encrypt_mks = Robin_e3.bin
board_build.offset = 0x5000
board_upload.offset_address = 0x08005000
build_flags = ${common_STM32F103RC_variant.build_flags}
-DTIMER_SERVO=TIM5 -DDEFAULT_SPI=3
build_unflags = ${common_STM32F103RC_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
debug_tool = stlink
#
# Creality (STM32F103Rx)
#
[STM32F103Rx_creality]
extends = stm32_variant
board_build.variant = MARLIN_F103Rx
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
extra_scripts = ${stm32_variant.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/random-bin.py
monitor_speed = 115200
debug_tool = jlink
upload_protocol = jlink
#
# Custom upload to SD via Marlin with Binary Protocol
#
[STM32F103Rx_creality_xfer]
extends = STM32F103Rx_creality
build_flags = ${STM32F103Rx_creality.build_flags} -DXFER_BUILD
extra_scripts = ${STM32F103Rx_creality.extra_scripts}
pre:buildroot/share/scripts/upload.py
upload_protocol = custom
#
# Creality 512K (STM32F103RE)
#
[env:STM32F103RE_creality]
extends = STM32F103Rx_creality
board = genericSTM32F103RE
[env:STM32F103RE_creality_xfer]
extends = STM32F103Rx_creality_xfer
board = genericSTM32F103RE
[env:STM32F103RE_creality_smartPro]
extends = STM32F103Rx_creality
board_build.offset = 0x10000
board_upload.offset_address = 0x08010000
#
# Creality 256K (STM32F103RC)
#
[env:STM32F103RC_creality]
extends = STM32F103Rx_creality
board = genericSTM32F103RC
[env:STM32F103RC_creality_xfer]
extends = STM32F103Rx_creality_xfer
board = genericSTM32F103RC
#
# BigTree SKR Mini E3 V2.0 & DIP / SKR CR6 (STM32F103RET6 ARM Cortex-M3)
#
# STM32F103RE_btt ............. RET6
# STM32F103RE_btt_USB ......... RET6 (USB mass storage)
#
[env:STM32F103RE_btt]
extends = stm32_variant
board = genericSTM32F103RE
board_build.variant = MARLIN_F103Rx
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
monitor_speed = 115200
debug_tool = jlink
upload_protocol = jlink
[env:STM32F103RE_btt_USB]
extends = env:STM32F103RE_btt
platform_packages = ${stm_flash_drive.platform_packages}
build_flags = ${env:STM32F103RE_btt.build_flags}
-DUSE_USB_FS -DUSBD_IRQ_PRIO=5
-DUSBD_IRQ_SUBPRIO=6 -DUSBD_USE_CDC_MSC
build_unflags = ${stm32_variant.build_unflags} -DUSBD_USE_CDC
#
# FLSUN QQS Pro (STM32F103VET6)
# board Hispeedv1
#
[env:flsun_hispeedv1]
extends = stm32_variant
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
board_build.encrypt_mks = Robin_mini.bin
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
-DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
#
# MKS Robin Nano V1.2 and V2
#
[env:mks_robin_nano35]
extends = stm32_variant
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
board_build.encrypt_mks = Robin_nano35.bin
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3
-DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
debug_tool = jlink
upload_protocol = jlink
#
# Mingda MPX_ARM_MINI
#
[env:mingda_mpx_arm_mini]
extends = stm32_variant
board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
board_build.offset = 0x10000
build_flags = ${stm32_variant.build_flags}
-DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
#
# Malyan M200 (STM32F103CB)
#
[env:STM32F103CB_malyan]
extends = common_stm32
board = malyanm200_f103cb
build_flags = ${common_stm32.build_flags}
-DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB
-DHAL_UART_MODULE_ENABLED
build_src_filter = ${common.default_src_filter} +<src/HAL/STM32>
#
# FLYmaker FLY Mini (STM32F103RCT6)
#
[env:FLY_MINI]
extends = stm32_variant
board = genericSTM32F103RC
board_build.variant = MARLIN_F103Rx
board_build.offset = 0x5000
board_upload.offset_address = 0x08005000
build_flags = ${stm32_variant.build_flags} -DSS_TIMER=4
#
# MKS Robin Mini (STM32F103VET6)
#
[env:mks_robin_mini]
extends = stm32_variant
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
board_build.encrypt_mks = Robin_mini.bin
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103VE -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
#
# MKS Robin Lite/Lite2 (STM32F103RCT6)
#
[env:mks_robin_lite]
extends = stm32_variant
board = genericSTM32F103RC
board_build.variant = MARLIN_F103Rx
board_build.encrypt_mks = mksLite.bin
board_build.offset = 0x5000
board_upload.offset_address = 0x08005000
#
# MKS ROBIN LITE3 (STM32F103RCT6)
#
[env:mks_robin_lite3]
extends = env:mks_robin_lite
board_build.encrypt_mks = mksLite3.bin
#
# MKS Robin Pro (STM32F103ZET6)
#
[env:mks_robin_pro]
extends = env:mks_robin
board_build.encrypt_mks = Robin_pro.bin
#
# MKS Robin E3p (STM32F103VET6)
# - LVGL UI
#
[env:mks_robin_e3p]
extends = stm32_variant
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
board_build.encrypt_mks = Robin_e3p.bin
board_build.offset = 0x7000
board_upload.offset_address = 0x08007000
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4
-DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2
debug_tool = jlink
upload_protocol = jlink
#
# JGAurora A5S A1 (STM32F103ZET6)
#
[env:jgaurora_a5s_a1]
extends = stm32_variant
board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
board_build.offset = 0xA000
board_upload.offset_address = 0x0800A000
build_flags = ${stm32_variant.build_flags}
-DSTM32F1xx -DSTM32_XL_DENSITY
extra_scripts = ${stm32_variant.extra_scripts}
buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
#
# FYSETC STM32F103RC
#
[env:STM32F103RC_fysetc]
extends = common_STM32F103RC_variant
extra_scripts = ${common_STM32F103RC_variant.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
lib_ldf_mode = chain
debug_tool = stlink
upload_protocol = serial
#
# Longer 3D board in Alfawise U20 (STM32F103VET6)
#
[env:STM32F103VE_longer]
extends = stm32_variant
lib_deps = ${common.lib_deps}
https://github.com/tpruvot/STM32_Servo_OpenDrain/archive/2.0.zip
board = genericSTM32F103VE
board_build.variant = MARLIN_F103VE_LONGER
board_build.rename = project.bin
board_build.offset = 0x10000
board_upload.offset_address = 0x08010000
build_flags = ${stm32_variant.build_flags} -DMCU_STM32F103VE -DU20 -DTS_V12
build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED
extra_scripts = ${stm32_variant.extra_scripts}
monitor_speed = 250000
debug_tool = stlink
#
# TRIGORILLA PRO (STM32F103ZET6)
#
[env:trigorilla_pro]
extends = stm32_variant
board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
build_flags = ${stm32_variant.build_flags}
-DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5
build_unflags = ${stm32_variant.build_unflags}
-DUSBCON -DUSBD_USE_CDC
#
# Chitu boards like Tronxy X5s (STM32F103ZET6)
#
[env:chitu_f103]
extends = stm32_variant
board = genericSTM32F103ZE
board_build.variant = MARLIN_F103Zx
board_build.offset = 0x8800
build_flags = ${stm32_variant.build_flags}
-DSTM32F1xx
build_unflags = ${stm32_variant.build_unflags}
extra_scripts = ${stm32_variant.extra_scripts}
buildroot/share/PlatformIO/scripts/chitu_crypt.py
#
# Some Chitu V5 boards have a problem with GPIO init.
# Use this target if G28 or G29 are always failing.
#
[env:chitu_v5_gpio_init]
extends = env:chitu_f103
build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
#
# Zonestar ZM3E2 V1.0 / ZM3E4 V1.0 / ZM3E4 V2.0
#
# STM32F103RC_ZM3E2_USB ........... RCT6 with 256K
# STM32F103VC_ZM3E4_USB ........... VCT6 with 256K
# STM32F103VE_ZM3E4V2_USB ......... VET6 with 512K
#
[ZONESTAR_ZM3E]
extends = stm32_variant
platform_packages = ${stm_flash_drive.platform_packages}
board_upload.offset_address = 0x08005000
board_build.offset = 0x5000
board_upload.maximum_size = 237568
extra_scripts = ${stm32_variant.extra_scripts}
build_flags = ${common_stm32.build_flags}
-DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DUSE_USB_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSBD_USE_CDC_MSC
build_unflags = ${stm32_variant.build_unflags} -DUSBD_USE_CDC
[env:STM32F103RC_ZM3E2_USB]
extends = ZONESTAR_ZM3E
board = genericSTM32F103RC
board_build.variant = MARLIN_F103Rx
[env:STM32F103VC_ZM3E4_USB]
extends = ZONESTAR_ZM3E
board = genericSTM32F103VC
board_build.variant = MARLIN_F103Vx
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1
[env:STM32F103VE_ZM3E4V2_USB]
extends = ZONESTAR_ZM3E
board = genericSTM32F103VE
board_build.variant = MARLIN_F103Vx
build_flags = ${ZONESTAR_ZM3E.build_flags} -DTIMER_TONE=TIM1
board_upload.maximum_size = 499712