mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-24 04:29:34 +00:00
1311 lines
58 KiB
C
1311 lines
58 KiB
C
#ifndef LANGUAGE_H
|
||
#define LANGUAGE_H
|
||
|
||
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
|
||
//
|
||
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
||
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
|
||
|
||
// Languages
|
||
// 1 English
|
||
// 2 Polish
|
||
// 3 French (awaiting translation!)
|
||
// 4 German
|
||
// 5 Spanish
|
||
// 6 Russian
|
||
// 7 Italian
|
||
// 8 Portuguese
|
||
|
||
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
|
||
|
||
#define PROTOCOL_VERSION "1.0"
|
||
|
||
#if MOTHERBOARD == 7 || MOTHERBOARD == 71
|
||
#define MACHINE_NAME "Ultimaker"
|
||
#define FIRMWARE_URL "http://firmware.ultimaker.com"
|
||
#else
|
||
#define MACHINE_NAME "Mendel"
|
||
#define FIRMWARE_URL "http://www.mendel-parts.com"
|
||
#endif
|
||
|
||
#define STRINGIFY_(n) #n
|
||
#define STRINGIFY(n) STRINGIFY_(n)
|
||
|
||
#if LANGUAGE_CHOICE == 1
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Ready."
|
||
#define MSG_SD_INSERTED "Card inserted"
|
||
#define MSG_SD_REMOVED "Card removed"
|
||
#define MSG_MAIN " Main \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Disable Steppers"
|
||
#define MSG_AUTO_HOME " Auto Home"
|
||
#define MSG_SET_ORIGIN " Set Origin"
|
||
#define MSG_PREHEAT_PLA " Preheat PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
|
||
#define MSG_PREHEAT_ABS " Preheat ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
|
||
#define MSG_COOLDOWN " Cooldown"
|
||
#define MSG_EXTRUDE " Extrude"
|
||
#define MSG_RETRACT " Retract"
|
||
#define MSG_PREHEAT_PLA " Preheat PLA"
|
||
#define MSG_PREHEAT_ABS " Preheat ABS"
|
||
#define MSG_MOVE_AXIS " Move Axis \x7E"
|
||
#define MSG_SPEED " Speed:"
|
||
#define MSG_NOZZLE " \002Nozzle:"
|
||
#define MSG_NOZZLE1 " \002Nozzle2:"
|
||
#define MSG_NOZZLE2 " \002Nozzle3:"
|
||
#define MSG_BED " \002Bed:"
|
||
#define MSG_FAN_SPEED " Fan speed:"
|
||
#define MSG_FLOW " Flow:"
|
||
#define MSG_CONTROL " Control \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Fact:"
|
||
#define MSG_AUTOTEMP " Autotemp:"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-retract:"
|
||
#define MSG_XSTEPS " Xsteps/mm:"
|
||
#define MSG_YSTEPS " Ysteps/mm:"
|
||
#define MSG_ZSTEPS " Zsteps/mm:"
|
||
#define MSG_ESTEPS " Esteps/mm:"
|
||
#define MSG_MAIN_WIDE " Main \003"
|
||
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperature \003"
|
||
#define MSG_MOTION_WIDE " Motion \x7E"
|
||
#define MSG_STORE_EPROM " Store memory"
|
||
#define MSG_LOAD_EPROM " Load memory"
|
||
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
|
||
#define MSG_REFRESH "\004Refresh"
|
||
#define MSG_WATCH " Watch \003"
|
||
#define MSG_PREPARE " Prepare \x7E"
|
||
#define MSG_PREPARE_ALT " Prepare \003"
|
||
#define MSG_CONTROL_ARROW " Control \x7E"
|
||
#define MSG_RETRACT_ARROW " Retract \x7E"
|
||
#define MSG_TUNE " Tune \x7E"
|
||
#define MSG_PAUSE_PRINT " Pause Print \x7E"
|
||
#define MSG_RESUME_PRINT " Resume Print \x7E"
|
||
#define MSG_STOP_PRINT " Stop Print \x7E"
|
||
#define MSG_CARD_MENU " Card Menu \x7E"
|
||
#define MSG_NO_CARD " No Card"
|
||
#define MSG_DWELL "Sleep..."
|
||
#define MSG_USERWAIT "Wait for user..."
|
||
#define MSG_NO_MOVE "No move."
|
||
#define MSG_PART_RELEASE "Partial Release"
|
||
#define MSG_KILLED "KILLED. "
|
||
#define MSG_STOPPED "STOPPED. "
|
||
#define MSG_STEPPER_RELEASED "Released."
|
||
#define MSG_CONTROL_RETRACT " Retract mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retract F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " External Reset"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||
#define MSG_FREE_MEMORY " Free Memory: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Done saving file."
|
||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
||
#define MSG_FILE_PRINTED "Done printing file"
|
||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||
#define MSG_END_FILE_LIST "End file list"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||
#define MSG_HEATING "Heating..."
|
||
#define MSG_HEATING_COMPLETE "Heating done."
|
||
#define MSG_BED_HEATING "Bed Heating."
|
||
#define MSG_BED_DONE "Bed done."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Count X: "
|
||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
||
#define MSG_RESEND "Resend: "
|
||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Reporting endstop status"
|
||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||
#define MSG_ENDSTOP_OPEN "open"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||
#define MSG_SD_FILE_OPENED "File opened: "
|
||
#define MSG_SD_SIZE " Size: "
|
||
#define MSG_SD_FILE_SELECTED "File selected"
|
||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate to high: "
|
||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 2
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Gotowe."
|
||
#define MSG_SD_INSERTED "Karta wlozona"
|
||
#define MSG_SD_REMOVED "Karta usunieta"
|
||
#define MSG_MAIN " Menu \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Wylacz silniki"
|
||
#define MSG_AUTO_HOME " Auto. poz. zerowa"
|
||
#define MSG_SET_ORIGIN " Ustaw punkt zerowy"
|
||
#define MSG_PREHEAT_PLA " Rozgrzej PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Ustawienia roz. PLA"
|
||
#define MSG_PREHEAT_ABS " Rozgrzej ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Ustawienia roz. ABS"
|
||
#define MSG_COOLDOWN " Chlodzenie"
|
||
#define MSG_EXTRUDE " Ekstruzja"
|
||
#define MSG_RETRACT " Cofanie"
|
||
#define MSG_MOVE_AXIS " Ruch osi \x7E"
|
||
#define MSG_SPEED " Predkosc:"
|
||
#define MSG_NOZZLE " \002Dysza:"
|
||
#define MSG_NOZZLE1 " \002Dysza2:"
|
||
#define MSG_NOZZLE2 " \002Dysza3:"
|
||
#define MSG_BED " \002Loze:"
|
||
#define MSG_FAN_SPEED " Obroty wiatraka:"
|
||
#define MSG_FLOW " Przeplyw:"
|
||
#define MSG_CONTROL " Kontrola \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Mnoznik:"
|
||
#define MSG_AUTOTEMP " Auto. temp.:"
|
||
#define MSG_ON "Wl. "
|
||
#define MSG_OFF "Wyl."
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Zryw Vxy: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " Vskok min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-wycofanie:"
|
||
#define MSG_XSTEPS " krokiX/mm:"
|
||
#define MSG_YSTEPS " krokiY/mm:"
|
||
#define MSG_ZSTEPS " krokiZ/mm:"
|
||
#define MSG_ESTEPS " krokiE/mm:"
|
||
#define MSG_MAIN_WIDE " Menu \003"
|
||
#define MSG_RECTRACT_WIDE " Wycofanie \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
||
#define MSG_MOTION_WIDE " Ruch \x7E"
|
||
#define MSG_STORE_EPROM " Zapisz w pamieci"
|
||
#define MSG_LOAD_EPROM " Wczytaj z pamieci"
|
||
#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
|
||
#define MSG_REFRESH "\004Odswiez"
|
||
#define MSG_WATCH " Obserwuj \003"
|
||
#define MSG_PREPARE " Przygotuj \x7E"
|
||
#define MSG_PREPARE_ALT " Przygotuj \003"
|
||
#define MSG_CONTROL_ARROW " Kontroluj \x7E"
|
||
#define MSG_RETRACT_ARROW " Wycofaj \x7E"
|
||
#define MSG_TUNE "Strojenie\x7E"
|
||
#define MSG_PAUSE_PRINT " Pauza \x7E"
|
||
#define MSG_RESUME_PRINT " Wznowienie \x7E"
|
||
#define MSG_STOP_PRINT " Stop \x7E"
|
||
#define MSG_CARD_MENU " Menu SDCard \x7E"
|
||
#define MSG_NO_CARD " Brak karty"
|
||
#define MSG_DWELL "Uspij..."
|
||
#define MSG_USERWAIT "Czekaj na uzytkownika..."
|
||
#define MSG_NO_MOVE "Brak ruchu."
|
||
#define MSG_PART_RELEASE "Czesciowe zwolnienie"
|
||
#define MSG_KILLED "Ubity. "
|
||
#define MSG_STOPPED "Zatrzymany. "
|
||
#define MSG_STEPPER_RELEASED "Zwolniony."
|
||
#define MSG_CONTROL_RETRACT " Wycofaj mm:"
|
||
#define MSG_CONTROL_RETRACTF " Wycofaj F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Skok Z mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " Cof. wycof. +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " Cof. wycof. F:"
|
||
#define MSG_AUTORETRACT " Auto. wycofanie:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Cos jest nie tak ze struktura menu."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Kolejkowanie \""
|
||
#define MSG_POWERUP "Zasilanie wlaczone"
|
||
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
|
||
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
|
||
#define MSG_WATCHDOG_RESET " Reset (watchdog)"
|
||
#define MSG_SOFTWARE_RESET " Reset (programowy)"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Autor: "
|
||
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
|
||
#define MSG_FREE_MEMORY " Wolna pamiec: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Plik zapisany."
|
||
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
|
||
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
|
||
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
|
||
#define MSG_BEGIN_FILE_LIST "Start listy plikow"
|
||
#define MSG_END_FILE_LIST "Koniec listy plikow"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
|
||
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
|
||
#define MSG_HEATING "Nagrzewanie ekstrudera..."
|
||
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
|
||
#define MSG_BED_HEATING "Nagrzewanie loza..."
|
||
#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Liczenie X: "
|
||
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
|
||
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
|
||
#define MSG_RESEND "Wyslij ponownie: "
|
||
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
|
||
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
|
||
#define MSG_ENDSTOP_HIT "WYZWOLONY"
|
||
#define MSG_ENDSTOP_OPEN "otwarty"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
|
||
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
|
||
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
|
||
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
|
||
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
|
||
#define MSG_SD_FILE_OPENED "Otwarto plik:"
|
||
#define MSG_SD_SIZE " Rozmiar:"
|
||
#define MSG_SD_FILE_SELECTED "Wybrano plik"
|
||
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
|
||
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
|
||
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
|
||
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 3
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " Prêt."
|
||
#define MSG_SD_INSERTED "Carte insérée"
|
||
#define MSG_SD_REMOVED "Carte retirée"
|
||
#define MSG_MAIN " Principal \003"
|
||
#define MSG_AUTOSTART " Démarrage auto."
|
||
#define MSG_DISABLE_STEPPERS " Désactiver moteurs"
|
||
#define MSG_AUTO_HOME " Home auto."
|
||
#define MSG_SET_ORIGIN " Régler origine"
|
||
#define MSG_PREHEAT_PLA " Préchauffage PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Réglages préchauffage PLA"
|
||
#define MSG_PREHEAT_ABS " Préchauffage ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Réglages préchauffage ABS"
|
||
#define MSG_COOLDOWN " Refroidissement"
|
||
#define MSG_EXTRUDE " Extrusion"
|
||
#define MSG_RETRACT " Retractation"
|
||
#define MSG_PREHEAT_PLA " Préchauffage PLA"
|
||
#define MSG_PREHEAT_ABS " Préchauffage ABS"
|
||
#define MSG_MOVE_AXIS " Déplacer axe \x7E"
|
||
#define MSG_SPEED " Vitesse:"
|
||
#define MSG_NOZZLE " \002Buse:"
|
||
#define MSG_NOZZLE1 " \002Buse2:"
|
||
#define MSG_NOZZLE2 " \002Buse3:"
|
||
#define MSG_BED " \002Lit:"
|
||
#define MSG_FAN_SPEED " Vitesse ventilateur:"
|
||
#define MSG_FLOW " Flux:"
|
||
#define MSG_CONTROL " Contrôle \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Facteur:"
|
||
#define MSG_AUTOTEMP " Temp. Auto.:"
|
||
#define MSG_ON "Marche "
|
||
#define MSG_OFF "Arrêt"
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " Vdepl min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-retract:"
|
||
#define MSG_XSTEPS " Xpas/mm:"
|
||
#define MSG_YSTEPS " Ypas/mm:"
|
||
#define MSG_ZSTEPS " Zpas/mm:"
|
||
#define MSG_ESTEPS " Epas/mm:"
|
||
#define MSG_MAIN_WIDE " Principal \003"
|
||
#define MSG_RECTRACT_WIDE " Rectractater \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperature \003"
|
||
#define MSG_MOTION_WIDE " Mouvement \x7E"
|
||
#define MSG_STORE_EPROM " Sauvegarder mémoire"
|
||
#define MSG_LOAD_EPROM " Lire mémoire"
|
||
#define MSG_RESTORE_FAILSAFE " Restaurer défaut"
|
||
#define MSG_REFRESH "\004Actualiser"
|
||
#define MSG_WATCH " Surveiller \003"
|
||
#define MSG_PREPARE " Préparer \x7E"
|
||
#define MSG_PREPARE_ALT " Prépare \003"
|
||
#define MSG_CONTROL_ARROW " Contrôle \x7E"
|
||
#define MSG_RETRACT_ARROW " Retracter \x7E"
|
||
#define MSG_TUNE " Régler \x7E"
|
||
#define MSG_PAUSE_PRINT " Pause impression \x7E"
|
||
#define MSG_RESUME_PRINT " Reprendre impression \x7E"
|
||
#define MSG_STOP_PRINT " Arrêter impression \x7E"
|
||
#define MSG_CARD_MENU " Menu carte \x7E"
|
||
#define MSG_NO_CARD " Pas de carte"
|
||
#define MSG_DWELL "Repos..."
|
||
#define MSG_USERWAIT "Attente de l'utilisateur..."
|
||
#define MSG_NO_MOVE "Aucun mouvement."
|
||
#define MSG_PART_RELEASE "Relâche partielle"
|
||
#define MSG_KILLED "TUÉ. "
|
||
#define MSG_STOPPED "STOPPÉ. "
|
||
#define MSG_STEPPER_RELEASED "RELÂCHÉ."
|
||
#define MSG_CONTROL_RETRACT " Retractation mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retractation F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
||
#define MSG_AUTORETRACT " Retract. Auto.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Quelque chose ne va pas avec MenuStructure."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Mise en tampon \""
|
||
#define MSG_POWERUP "Allumage"
|
||
#define MSG_EXTERNAL_RESET " RAZ Externe"
|
||
#define MSG_BROWNOUT_RESET " RAZ défaut alim."
|
||
#define MSG_WATCHDOG_RESET " RAZ Watchdog"
|
||
#define MSG_SOFTWARE_RESET " RAZ logicielle"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Auteur: "
|
||
#define MSG_CONFIGURATION_VER " Dernière MàJ: "
|
||
#define MSG_FREE_MEMORY " Mémoire libre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Fichier enregistré."
|
||
#define MSG_ERR_LINE_NO "Le numéro de ligne n'est pas la dernière ligne + 1, dernière ligne: "
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de contrôle : dernière ligne: "
|
||
#define MSG_ERR_NO_CHECKSUM "Pas de somme de contrôle avec le numéro de ligne, dernière ligne: "
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numéro de ligne avec somme de contrôle, dernière ligne: "
|
||
#define MSG_FILE_PRINTED "Impression terminée"
|
||
#define MSG_BEGIN_FILE_LIST "Début de la liste de fichiers"
|
||
#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
|
||
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de température"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
|
||
#define MSG_HEATING "En chauffe..."
|
||
#define MSG_HEATING_COMPLETE "Chauffe terminée."
|
||
#define MSG_BED_HEATING "Chauffe du lit."
|
||
#define MSG_BED_DONE "Chauffe du lit terminée."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Compteur X: "
|
||
#define MSG_ERR_KILLED "Impression arrêtée. kill() appelée!"
|
||
#define MSG_ERR_STOPPED "Impression arrêtée à cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise à zéro. Réactivez là après redémarrage)"
|
||
#define MSG_RESEND "Renvoie: "
|
||
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
|
||
#define MSG_ACTIVE_EXTRUDER "Extruder actif: "
|
||
#define MSG_INVALID_EXTRUDER "Extruder invalide"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Affichage du status des fin de course"
|
||
#define MSG_ENDSTOP_HIT "DÉCLENCHÉ"
|
||
#define MSG_ENDSTOP_OPEN "OUVERT"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-répertoire"
|
||
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
|
||
#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
|
||
#define MSG_SD_CARD_OK "Carte SD Ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
|
||
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
|
||
#define MSG_SD_SIZE " Taille: "
|
||
#define MSG_SD_FILE_SELECTED "Fichier sélectionné"
|
||
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
|
||
#define MSG_SD_PRINTING_BYTE "Octet impression SD "
|
||
#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'écriture dans le fichier"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-répertoire: "
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate trop élevé: "
|
||
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion froide évitée"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion trop longue évitée"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 4
|
||
|
||
// LCD Menu Messages
|
||
|
||
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
||
|
||
#define MSG_SD_INSERTED "SDKarte erkannt"
|
||
#define MSG_SD_REMOVED "SDKarte entfernt"
|
||
#define MSG_MAIN " Hauptmneü \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Stepper abschalten"
|
||
#define MSG_AUTO_HOME " Auto Nullpunkt"
|
||
#define MSG_SET_ORIGIN " Setze Nullpunkt"
|
||
#define MSG_PREHEAT_PLA " Vorwärmen PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
|
||
#define MSG_PREHEAT_ABS " Vorwärmen ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
|
||
#define MSG_COOLDOWN " Abkühlen"
|
||
#define MSG_EXTRUDE " Extrude"
|
||
#define MSG_RETRACT " Retract"
|
||
#define MSG_MOVE_AXIS " Achsen bewegen\x7E"
|
||
#define MSG_SPEED " Geschw:"
|
||
#define MSG_NOZZLE " \002Düse:"
|
||
#define MSG_NOZZLE1 " \002Düse2:"
|
||
#define MSG_NOZZLE2 " \002Düse3:"
|
||
#define MSG_BED " \002Bett:"
|
||
#define MSG_FAN_SPEED " Lüftergeschw.:"
|
||
#define MSG_FLOW " Fluß:"
|
||
#define MSG_CONTROL " Einstellungen \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Faktor:"
|
||
#define MSG_AUTOTEMP " AutoTemp:"
|
||
#define MSG_ON "Ein "
|
||
#define MSG_OFF "Aus "
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-Retract:"
|
||
#define MSG_XSTEPS " Xsteps/mm:"
|
||
#define MSG_YSTEPS " Ysteps/mm:"
|
||
#define MSG_ZSTEPS " Zsteps/mm:"
|
||
#define MSG_ESTEPS " Esteps/mm:"
|
||
#define MSG_MAIN_WIDE " Hauptmenü \003"
|
||
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
||
#define MSG_WATCH " Beobachten \003"
|
||
#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperatur \003"
|
||
#define MSG_MOTION_WIDE " Bewegung \x7E"
|
||
#define MSG_STORE_EPROM " EPROM speichern"
|
||
#define MSG_LOAD_EPROM " EPROM laden"
|
||
#define MSG_RESTORE_FAILSAFE " Standardkonfig."
|
||
#define MSG_REFRESH "\004Aktualisieren"
|
||
#define MSG_PREPARE " Vorbereitung \x7E"
|
||
#define MSG_PREPARE_ALT " Vorbereitung \003"
|
||
#define MSG_CONTROL_ARROW " Einstellungen \x7E"
|
||
#define MSG_TUNE " Justierung \x7E"
|
||
#define MSG_PAUSE_PRINT " Druck anhalten\x7E"
|
||
#define MSG_RESUME_PRINT " Druck fortsetz\x7E"
|
||
#define MSG_STOP_PRINT " Druck stoppen \x7E"
|
||
#define MSG_CARD_MENU " SDKarten Menü \x7E"
|
||
#define MSG_NO_CARD " Keine SDKarte"
|
||
#define MSG_DWELL "Warten..."
|
||
#define MSG_USERWAIT "Warte auf Nutzer..."
|
||
#define MSG_NO_MOVE "Kein Zug."
|
||
#define MSG_PART_RELEASE "Stepper tlw frei"
|
||
#define MSG_KILLED "KILLED"
|
||
#define MSG_STOPPED "GESTOPPT"
|
||
#define MSG_STEPPER_RELEASED "Stepper frei"
|
||
#define MSG_CONTROL_RETRACT " Retract mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retract F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " External Reset"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_MARLIN "Marlin: "
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||
#define MSG_FREE_MEMORY " Free Memory: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Done saving file."
|
||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
||
#define MSG_FILE_PRINTED "Done printing file"
|
||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||
#define MSG_END_FILE_LIST "End file list"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||
#define MSG_HEATING "Heating..."
|
||
#define MSG_HEATING_COMPLETE "Heating done."
|
||
#define MSG_BED_HEATING "Bed Heating."
|
||
#define MSG_BED_DONE "Bed done."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Count X:"
|
||
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
|
||
#define MSG_RESEND "Resend:"
|
||
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Reporting endstop status"
|
||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||
#define MSG_ENDSTOP_OPEN "open"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||
#define MSG_SD_FILE_OPENED "File opened:"
|
||
#define MSG_SD_SIZE " Size:"
|
||
#define MSG_SD_FILE_SELECTED "File selected"
|
||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
|
||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 5
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Lista."
|
||
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
|
||
#define MSG_SD_REMOVED "Tarjeta SD Retirada"
|
||
#define MSG_MAIN " Menu Principal \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Apagar Motores"
|
||
#define MSG_AUTO_HOME " Llevar Ejes al Cero"
|
||
#define MSG_SET_ORIGIN " Establecer Cero"
|
||
#define MSG_COOLDOWN " Enfriar"
|
||
#define MSG_EXTRUDE " Extruir"
|
||
#define MSG_RETRACT " Retraer"
|
||
#define MSG_PREHEAT_PLA " Precalentar PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
|
||
#define MSG_PREHEAT_ABS " Precalentar ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
|
||
#define MSG_MOVE_AXIS " Mover Ejes \x7E"
|
||
#define MSG_SPEED " Velocidad:"
|
||
#define MSG_NOZZLE " \002Nozzle:"
|
||
#define MSG_NOZZLE1 " \002Nozzle2:"
|
||
#define MSG_NOZZLE2 " \002Nozzle3:"
|
||
#define MSG_BED " \002Base:"
|
||
#define MSG_FAN_SPEED " Ventilador:"
|
||
#define MSG_FLOW " Flujo:"
|
||
#define MSG_CONTROL " Control \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Fact:"
|
||
#define MSG_AUTOTEMP " Autotemp:"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-retrac.:"
|
||
#define MSG_XSTEPS " Xpasos/mm:"
|
||
#define MSG_YSTEPS " Ypasos/mm:"
|
||
#define MSG_ZSTEPS " Zpasos/mm:"
|
||
#define MSG_ESTEPS " Epasos/mm:"
|
||
#define MSG_MAIN_WIDE " Menu Principal \003"
|
||
#define MSG_RECTRACT_WIDE " Retraer \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
||
#define MSG_MOTION_WIDE " Movimiento \x7E"
|
||
#define MSG_STORE_EPROM " Guardar Memoria"
|
||
#define MSG_LOAD_EPROM " Cargar Memoria"
|
||
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
|
||
#define MSG_REFRESH "\004Volver a cargar"
|
||
#define MSG_WATCH " Monitorizar \003"
|
||
#define MSG_PREPARE " Preparar \x7E"
|
||
#define MSG_PREPARE_ALT " Preparar \003"
|
||
#define MSG_CONTROL_ARROW " Control \x7E"
|
||
#define MSG_RETRACT_ARROW " Retraer \x7E"
|
||
#define MSG_TUNE " Ajustar \x7E"
|
||
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
|
||
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
|
||
#define MSG_STOP_PRINT " Detener Impresion \x7E"
|
||
#define MSG_CARD_MENU " Menu de SD \x7E"
|
||
#define MSG_NO_CARD " No hay Tarjeta SD"
|
||
#define MSG_DWELL "Reposo..."
|
||
#define MSG_USERWAIT "Esperando Ordenes..."
|
||
#define MSG_NO_MOVE "Sin movimiento"
|
||
#define MSG_PART_RELEASE "Desacople Parcial"
|
||
#define MSG_KILLED "PARADA DE EMERGENCIA. "
|
||
#define MSG_STOPPED "PARADA. "
|
||
#define MSG_STEPPER_RELEASED "Desacoplada."
|
||
#define MSG_CONTROL_RETRACT " Retraer mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retraer F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
|
||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "En cola \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Externo"
|
||
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
||
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
||
#define MSG_SOFTWARE_RESET " Reset por Software"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Autor: "
|
||
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
|
||
#define MSG_FREE_MEMORY " Memoria libre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Guardado."
|
||
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
|
||
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
|
||
#define MSG_FILE_PRINTED "Impresion terminada"
|
||
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
|
||
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
||
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
||
#define MSG_HEATING "Calentando..."
|
||
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
|
||
#define MSG_BED_HEATING "Calentando la base."
|
||
#define MSG_BED_DONE "Base Caliente."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Cuenta X:"
|
||
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
|
||
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
|
||
#define MSG_RESEND "Reenviar:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_M119_REPORT "Comprobando fines de carrera."
|
||
#define MSG_ENDSTOP_HIT "PULSADO"
|
||
#define MSG_ENDSTOP_OPEN "abierto"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
|
||
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
|
||
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
|
||
#define MSG_SD_CARD_OK "Tarjeta SD OK"
|
||
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
|
||
#define MSG_SD_FILE_OPENED "Archivo abierto:"
|
||
#define MSG_SD_SIZE " Tamaño:"
|
||
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
|
||
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
|
||
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
|
||
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
|
||
|
||
#endif
|
||
|
||
#if LANGUAGE_CHOICE == 6
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Готов."
|
||
#define MSG_SD_INSERTED "Карта вставлена"
|
||
#define MSG_SD_REMOVED "Карта извлечена"
|
||
#define MSG_MAIN " Меню \003"
|
||
#define MSG_AUTOSTART " Автостарт "
|
||
#define MSG_DISABLE_STEPPERS " Выключить двигатели"
|
||
#define MSG_AUTO_HOME " Парковка "
|
||
#define MSG_SET_ORIGIN " Запомнить ноль "
|
||
#define MSG_PREHEAT_PLA " Преднагрев PLA "
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
|
||
#define MSG_PREHEAT_ABS " Преднагрев ABS "
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
|
||
#define MSG_COOLDOWN " Охлаждение "
|
||
#define MSG_EXTRUDE " Экструзия "
|
||
#define MSG_RETRACT " Откат"
|
||
#define MSG_MOVE_AXIS " Движение по осям \x7E"
|
||
#define MSG_SPEED " Скорость:"
|
||
#define MSG_NOZZLE " \002 Фильера:"
|
||
#define MSG_NOZZLE1 " \002 Фильера2:"
|
||
#define MSG_NOZZLE2 " \002 Фильера3:"
|
||
#define MSG_BED " \002 Кровать:"
|
||
#define MSG_FAN_SPEED " Куллер:"
|
||
#define MSG_FLOW " Поток:"
|
||
#define MSG_CONTROL " Настройки \003"
|
||
#define MSG_MIN " \002 Минимум:"
|
||
#define MSG_MAX " \002 Максимум:"
|
||
#define MSG_FACTOR " \002 Фактор:"
|
||
#define MSG_AUTOTEMP " Autotemp:"
|
||
#define MSG_ON "Вкл. "
|
||
#define MSG_OFF "Выкл. "
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-retract:"
|
||
#define MSG_XSTEPS " X шаг/mm:"
|
||
#define MSG_YSTEPS " Y шаг/mm:"
|
||
#define MSG_ZSTEPS " Z шаг/mm:"
|
||
#define MSG_ESTEPS " E шаг/mm:"
|
||
#define MSG_MAIN_WIDE " Меню \003"
|
||
#define MSG_RECTRACT_WIDE " Откат подачи \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Температура \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Температура \003"
|
||
#define MSG_MOTION_WIDE " Скорости \x7E"
|
||
#define MSG_STORE_EPROM " Сохранить настройки"
|
||
#define MSG_LOAD_EPROM " Загрузить настройки"
|
||
#define MSG_RESTORE_FAILSAFE " Сброс настроек "
|
||
#define MSG_REFRESH "\004Обновить "
|
||
#define MSG_WATCH " Обзор \003"
|
||
#define MSG_PREPARE " Действия \x7E"
|
||
#define MSG_PREPARE_ALT " Действия \003"
|
||
#define MSG_CONTROL_ARROW " Настройки \x7E"
|
||
#define MSG_RETRACT_ARROW " Настройки отката \x7E"
|
||
#define MSG_TUNE " Tune \x7E"
|
||
#define MSG_PAUSE_PRINT " Пауза печати \x7E"
|
||
#define MSG_RESUME_PRINT " Продолжить печать \x7E"
|
||
#define MSG_STOP_PRINT " Остановить печать \x7E"
|
||
#define MSG_CARD_MENU " Меню карты \x7E"
|
||
#define MSG_NO_CARD " Нет карты"
|
||
#define MSG_DWELL "Сон..."
|
||
#define MSG_USERWAIT "Нажмите для продолж."
|
||
#define MSG_NO_MOVE "Нет движения. "
|
||
#define MSG_PART_RELEASE " Извлечение принта "
|
||
#define MSG_KILLED "УБИТО. "
|
||
#define MSG_STOPPED "ОСТАНОВЛЕНО. "
|
||
#define MSG_STEPPER_RELEASED "Двигатели отключены."
|
||
#define MSG_CONTROL_RETRACT " Откат mm:"
|
||
#define MSG_CONTROL_RETRACTF " Откат F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
|
||
#define MSG_AUTORETRACT " АвтоОткат:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Ошибка в структуре меню."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "Запланировано \""
|
||
#define MSG_POWERUP "Включение питания"
|
||
#define MSG_EXTERNAL_RESET " Внешний сброс"
|
||
#define MSG_BROWNOUT_RESET " Brown out сброс"
|
||
#define MSG_WATCHDOG_RESET " Watchdog сброс"
|
||
#define MSG_SOFTWARE_RESET " программный сброс"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Автор: "
|
||
#define MSG_CONFIGURATION_VER " Последнее обновление: "
|
||
#define MSG_FREE_MEMORY " Памяти свободно: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Файл записан."
|
||
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
|
||
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
|
||
#define MSG_FILE_PRINTED "Печать файла завершена"
|
||
#define MSG_BEGIN_FILE_LIST "Список файлов"
|
||
#define MSG_END_FILE_LIST "Конец списка файлов"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
|
||
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
|
||
#define MSG_HEATING "Нагрев... "
|
||
#define MSG_HEATING_COMPLETE "Наргето. "
|
||
#define MSG_BED_HEATING "Нагрев стола... "
|
||
#define MSG_BED_DONE "Стол нагрет. "
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Count X:"
|
||
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
|
||
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
|
||
#define MSG_RESEND "Переотправка:"
|
||
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
|
||
#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
|
||
#define MSG_X_MIN "x_min:"
|
||
#define MSG_X_MAX "x_max:"
|
||
#define MSG_Y_MIN "y_min:"
|
||
#define MSG_Y_MAX "y_max:"
|
||
#define MSG_Z_MIN "z_min:"
|
||
#define MSG_Z_MAX "z_max:"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
|
||
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
|
||
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
|
||
#define MSG_SD_CARD_OK "SD карта в порядке"
|
||
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
|
||
#define MSG_SD_FILE_OPENED "Файл открыт:"
|
||
#define MSG_SD_SIZE " Размер:"
|
||
#define MSG_SD_FILE_SELECTED "Файл выбран"
|
||
#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
|
||
#define MSG_SD_PRINTING_BYTE "SD печать byte "
|
||
#define MSG_SD_NOT_PRINTING "нет SD печати"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
|
||
#define MSG_ENDSTOPS_HIT "концевик сработал: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
|
||
#define MSG_M119_REPORT "Статус концевиков"
|
||
#define MSG_ENDSTOP_HIT "Срабатывание концевика"
|
||
#define MSG_ENDSTOP_OPEN "Концевик освобожден"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 7
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Pronto."
|
||
#define MSG_SD_INSERTED "SD Card inserita"
|
||
#define MSG_SD_REMOVED "SD Card rimossa"
|
||
#define MSG_MAIN " Menu principale \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Disabilita Motori Passo-Passo"
|
||
#define MSG_AUTO_HOME " Auto Home"
|
||
#define MSG_SET_ORIGIN " Imposta Origini Assi"
|
||
#define MSG_PREHEAT_PLA " Preriscalda PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " Impostazioni Preriscaldamento PLA"
|
||
#define MSG_PREHEAT_ABS " Preriscalda ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " Impostazioni Preriscaldamento ABS"
|
||
#define MSG_COOLDOWN " Rafredda"
|
||
#define MSG_EXTRUDE " Estrudi"
|
||
#define MSG_RETRACT " Ritrai"
|
||
#define MSG_MOVE_AXIS " Muovi Asse \x7E"
|
||
#define MSG_SPEED " Velcità:"
|
||
#define MSG_NOZZLE " \002Ugello:"
|
||
#define MSG_NOZZLE1 " \002Ugello2:"
|
||
#define MSG_NOZZLE2 " \002Ugello3:"
|
||
#define MSG_BED " \002Piatto:"
|
||
#define MSG_FAN_SPEED " Velocità Ventola:"
|
||
#define MSG_FLOW " Flusso:"
|
||
#define MSG_CONTROL " Controllo \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Fact:"
|
||
#define MSG_AUTOTEMP " Autotemp:"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-ritrai:"
|
||
#define MSG_XSTEPS " Xpassi/mm:"
|
||
#define MSG_YSTEPS " Ypassi/mm:"
|
||
#define MSG_ZSTEPS " Zpassi/mm:"
|
||
#define MSG_ESTEPS " Epassi/mm:"
|
||
#define MSG_MAIN_WIDE " Menu Principale \003"
|
||
#define MSG_RECTRACT_WIDE " Ritrai \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
||
#define MSG_MOTION_WIDE " Movimento \x7E"
|
||
#define MSG_STORE_EPROM " Salva in memoria"
|
||
#define MSG_LOAD_EPROM " Carica dalla memoria"
|
||
#define MSG_RESTORE_FAILSAFE " Configurazioni di default"
|
||
#define MSG_REFRESH "\004Aggiorna"
|
||
#define MSG_WATCH " Guarda \003"
|
||
#define MSG_PREPARE " Prepara \x7E"
|
||
#define MSG_PREPARE_ALT " Prepara \003"
|
||
#define MSG_CONTROL_ARROW " Controllo \x7E"
|
||
#define MSG_RETRACT_ARROW " Ritrai \x7E"
|
||
#define MSG_TUNE " Tune \x7E"
|
||
#define MSG_PAUSE_PRINT " Metti in Pausa la Stampa \x7E"
|
||
#define MSG_RESUME_PRINT " Riprendi Stampa \x7E"
|
||
#define MSG_STOP_PRINT " Arresta Stampa \x7E"
|
||
#define MSG_CARD_MENU " Card Menu \x7E"
|
||
#define MSG_NO_CARD " No Card"
|
||
#define MSG_DWELL " Sospensione..."
|
||
#define MSG_USERWAIT "Attendi utente..."
|
||
#define MSG_NO_MOVE "Nessun movimento."
|
||
#define MSG_PART_RELEASE "Rilascio Parziale"
|
||
#define MSG_KILLED "UCCISO. "
|
||
#define MSG_STOPPED "ARRESTATO. "
|
||
#define MSG_STEPPER_RELEASED "Rilasciato."
|
||
#define MSG_CONTROL_RETRACT " Ritrai mm:"
|
||
#define MSG_CONTROL_RETRACTF " Ritrai F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Salta mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
||
#define MSG_AUTORETRACT " AutoRilascio.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "accodamento \""
|
||
#define MSG_POWERUP "Accensione"
|
||
#define MSG_EXTERNAL_RESET " Reset Esterno"
|
||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Autore: "
|
||
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
|
||
#define MSG_FREE_MEMORY " Memoria Libera: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "File Salvato."
|
||
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea:"
|
||
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea:"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea:"
|
||
#define MSG_FILE_PRINTED "File stampato"
|
||
#define MSG_BEGIN_FILE_LIST "Inizio Lista File"
|
||
#define MSG_END_FILE_LIST "Fine Lista File"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
|
||
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
|
||
#define MSG_HEATING "Riscaldamento..."
|
||
#define MSG_HEATING_COMPLETE "Riscaldamento concluso."
|
||
#define MSG_BED_HEATING "Riscaldamento Piatto."
|
||
#define MSG_BED_DONE "Piatto Pronto."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Calcola X:"
|
||
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
|
||
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
|
||
#define MSG_RESEND "Reinviato:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
|
||
#define MSG_INVALID_EXTRUDER "Estrusore non valido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Segnalazione stato degli endstop"
|
||
#define MSG_ENDSTOP_HIT "INNESCATO"
|
||
#define MSG_ENDSTOP_OPEN "aperto"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
|
||
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
|
||
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
|
||
#define MSG_SD_CARD_OK "SD card ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
|
||
#define MSG_SD_FILE_OPENED "File aperto:"
|
||
#define MSG_SD_SIZE " Dimensione:"
|
||
#define MSG_SD_FILE_SELECTED "File selezionato"
|
||
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
|
||
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
|
||
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella:"
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate troppo alto : "
|
||
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
|
||
|
||
#endif
|
||
|
||
|
||
#if LANGUAGE_CHOICE == 8
|
||
|
||
// LCD Menu Messages
|
||
#define WELCOME_MSG MACHINE_NAME " Pronta."
|
||
#define MSG_SD_INSERTED "Cartao SD inserido"
|
||
#define MSG_SD_REMOVED "Cartao SD removido"
|
||
#define MSG_MAIN " Menu Principal \003"
|
||
#define MSG_AUTOSTART " Autostart"
|
||
#define MSG_DISABLE_STEPPERS " Apagar Motores"
|
||
#define MSG_AUTO_HOME " Ir para Origen"
|
||
#define MSG_SET_ORIGIN " Estabelecer Origen"
|
||
#define MSG_PREHEAT_PLA " pre-aquecer PLA"
|
||
#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
|
||
#define MSG_PREHEAT_ABS " pre-aquecer ABS"
|
||
#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
|
||
#define MSG_COOLDOWN " Esfriar"
|
||
#define MSG_EXTRUDE " Extrudar"
|
||
#define MSG_RETRACT " Retrair"
|
||
#define MSG_PREHEAT_PLA " pre-aquecer PLA"
|
||
#define MSG_PREHEAT_ABS " pre-aquecer ABS"
|
||
#define MSG_MOVE_AXIS " Mover eixo \x7E"
|
||
#define MSG_SPEED " Velocidade:"
|
||
#define MSG_NOZZLE " \002Nozzle:"
|
||
#define MSG_NOZZLE1 " \002Nozzle2:"
|
||
#define MSG_NOZZLE2 " \002Nozzle3:"
|
||
#define MSG_BED " \002Base:"
|
||
#define MSG_FAN_SPEED " Velocidade Ventoinha:"
|
||
#define MSG_FLOW " Fluxo:"
|
||
#define MSG_CONTROL " Controle \003"
|
||
#define MSG_MIN " \002 Min:"
|
||
#define MSG_MAX " \002 Max:"
|
||
#define MSG_FACTOR " \002 Fact:"
|
||
#define MSG_AUTOTEMP " Autotemp:"
|
||
#define MSG_ON "On "
|
||
#define MSG_OFF "Off"
|
||
#define MSG_PID_P " PID-P: "
|
||
#define MSG_PID_I " PID-I: "
|
||
#define MSG_PID_D " PID-D: "
|
||
#define MSG_PID_C " PID-C: "
|
||
#define MSG_ACC " Acc:"
|
||
#define MSG_VXY_JERK " Vxy-jerk: "
|
||
#define MSG_VMAX " Vmax "
|
||
#define MSG_X "x:"
|
||
#define MSG_Y "y:"
|
||
#define MSG_Z "z:"
|
||
#define MSG_E "e:"
|
||
#define MSG_VMIN " Vmin:"
|
||
#define MSG_VTRAV_MIN " VTrav min:"
|
||
#define MSG_AMAX " Amax "
|
||
#define MSG_A_RETRACT " A-retract:"
|
||
#define MSG_XSTEPS " Xpasso/mm:"
|
||
#define MSG_YSTEPS " Ypasso/mm:"
|
||
#define MSG_ZSTEPS " Zpasso/mm:"
|
||
#define MSG_ESTEPS " Epasso/mm:"
|
||
#define MSG_MAIN_WIDE " Menu Principal \003"
|
||
#define MSG_RECTRACT_WIDE " Retrair \x7E"
|
||
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
||
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
||
#define MSG_MOTION_WIDE " Movimento \x7E"
|
||
#define MSG_STORE_EPROM " Guardar memoria"
|
||
#define MSG_LOAD_EPROM " Carregar memoria"
|
||
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
|
||
#define MSG_REFRESH "\004Recarregar"
|
||
#define MSG_WATCH " Monitorar \003"
|
||
#define MSG_PREPARE " Preparar \x7E"
|
||
#define MSG_PREPARE_ALT " Preparar \003"
|
||
#define MSG_CONTROL_ARROW " Controle \x7E"
|
||
#define MSG_RETRACT_ARROW " Retrair \x7E"
|
||
#define MSG_TUNE " Tune \x7E"
|
||
#define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
|
||
#define MSG_RESUME_PRINT " Resumir Impressao \x7E"
|
||
#define MSG_STOP_PRINT " Parar Impressao \x7E"
|
||
#define MSG_CARD_MENU " Menu cartao SD \x7E"
|
||
#define MSG_NO_CARD " Sem cartao SD"
|
||
#define MSG_DWELL "Repouso..."
|
||
#define MSG_USERWAIT "Esperando Ordem..."
|
||
#define MSG_NO_MOVE "Sem movimento."
|
||
#define MSG_PART_RELEASE "Lancamento Parcial"
|
||
#define MSG_KILLED "PARADA DE EMERGENCIA. "
|
||
#define MSG_STOPPED "PARADA. "
|
||
#define MSG_STEPPER_RELEASED "Lancado."
|
||
#define MSG_CONTROL_RETRACT " Retrair mm:"
|
||
#define MSG_CONTROL_RETRACTF " Retrair F:"
|
||
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
||
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
|
||
#define MSG_AUTORETRACT " AutoRetr.:"
|
||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
|
||
|
||
// Serial Console Messages
|
||
|
||
#define MSG_Enqueing "enqueing \""
|
||
#define MSG_POWERUP "PowerUp"
|
||
#define MSG_EXTERNAL_RESET " Reset Externo"
|
||
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
|
||
#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
|
||
#define MSG_SOFTWARE_RESET " Reset por Software"
|
||
#define MSG_MARLIN "Marlin "
|
||
#define MSG_AUTHOR " | Author: "
|
||
#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
|
||
#define MSG_FREE_MEMORY " memoria Livre: "
|
||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||
#define MSG_OK "ok"
|
||
#define MSG_FILE_SAVED "Guardado."
|
||
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
|
||
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
|
||
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
|
||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
|
||
#define MSG_FILE_PRINTED "Impressao terminada"
|
||
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
|
||
#define MSG_END_FILE_LIST "Fim da lista de arquivos"
|
||
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
|
||
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
|
||
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
|
||
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
|
||
#define MSG_HEATING "Aquecendo..."
|
||
#define MSG_HEATING_COMPLETE "Aquecido."
|
||
#define MSG_BED_HEATING "Aquecendo a Base."
|
||
#define MSG_BED_DONE "Base quente."
|
||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
||
#define MSG_COUNT_X " Conta X:"
|
||
#define MSG_ERR_KILLED "Impressora parada com kill() !!"
|
||
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
|
||
#define MSG_RESEND "Reenviar:"
|
||
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
|
||
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
|
||
#define MSG_INVALID_EXTRUDER "Extrusor invalido"
|
||
#define MSG_X_MIN "x_min: "
|
||
#define MSG_X_MAX "x_max: "
|
||
#define MSG_Y_MIN "y_min: "
|
||
#define MSG_Y_MAX "y_max: "
|
||
#define MSG_Z_MIN "z_min: "
|
||
#define MSG_Z_MAX "z_max: "
|
||
#define MSG_M119_REPORT "Relatando estado do ponto final"
|
||
#define MSG_ENDSTOP_HIT "PULSADO"
|
||
#define MSG_ENDSTOP_OPEN "Aberto"
|
||
|
||
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
|
||
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
|
||
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
|
||
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
|
||
#define MSG_SD_CARD_OK "cartao SD ok"
|
||
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
|
||
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
|
||
#define MSG_SD_FILE_OPENED "Arquivo aberto:"
|
||
#define MSG_SD_SIZE " Size:"
|
||
#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
|
||
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
|
||
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
|
||
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
|
||
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
|
||
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
|
||
|
||
#define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
|
||
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
|
||
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
|
||
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
|
||
|
||
|
||
#endif
|
||
|
||
#endif // ifndef LANGUAGE_H
|