mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-12 21:41:34 +00:00
304 lines
9.2 KiB
C
304 lines
9.2 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Mightyboard Rev.E pin assignments
|
|
* also works for Rev D boards. It's all rev E despite what the silk screen says
|
|
*/
|
|
|
|
/**
|
|
* Rev B 2 JAN 2017
|
|
*
|
|
* Added pin definitions for:
|
|
* M3, M4 & M5 spindle control commands
|
|
* case light
|
|
*
|
|
* Corrected pin assignment for EX2_HEAT_PIN pin. Changed it from 9 to 11. The port
|
|
* number (B5) agrees with the schematic but B5 is assigned to logical pin 11.
|
|
*/
|
|
|
|
#define ALLOW_MEGA1280
|
|
#include "env_validate.h"
|
|
|
|
#define BOARD_INFO_NAME "Mightyboard"
|
|
#define DEFAULT_MACHINE_NAME "MB Replicator"
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 36 // C1 (1280-EX1)
|
|
#define SERVO1_PIN 37 // C0 (1280-EX2)
|
|
#define SERVO2_PIN 40 // G1 (1280-EX3)
|
|
#define SERVO3_PIN 41 // G0 (1280-EX4)
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN 49 // L0
|
|
#define X_MAX_PIN 48 // L1
|
|
#define Y_MIN_PIN 47 // L2
|
|
#define Y_MAX_PIN 46 // L3
|
|
#define Z_MIN_PIN 43 // L6
|
|
#define Z_MAX_PIN 42 // L7
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 42
|
|
#endif
|
|
|
|
//
|
|
// Filament Runout Pins
|
|
//
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN 49
|
|
#endif
|
|
#ifndef FIL_RUNOUT2_PIN
|
|
#define FIL_RUNOUT2_PIN 47
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 55 // F1
|
|
#define X_DIR_PIN 54 // F0
|
|
#define X_ENABLE_PIN 56 // F2
|
|
|
|
#define Y_STEP_PIN 59 // F5
|
|
#define Y_DIR_PIN 58 // F4
|
|
#define Y_ENABLE_PIN 60 // F6
|
|
|
|
#define Z_STEP_PIN 63 // K1
|
|
#define Z_DIR_PIN 62 // K0
|
|
#define Z_ENABLE_PIN 64 // K2
|
|
|
|
#define E0_STEP_PIN 25 // A3
|
|
#define E0_DIR_PIN 24 // A2
|
|
#define E0_ENABLE_PIN 26 // A4
|
|
|
|
#define E1_STEP_PIN 29 // A7
|
|
#define E1_DIR_PIN 28 // A6
|
|
#define E1_ENABLE_PIN 39 // G2
|
|
|
|
//
|
|
// I2C Digipots - MCP4018
|
|
// Address 5E (2F << 1)
|
|
// Set from 0 - 127 with stop bit.
|
|
// (Ex. 3F << 1 | 1)
|
|
//
|
|
#define DIGIPOTS_I2C_SCL 76 // J5
|
|
#define DIGIPOTS_I2C_SDA_X 57 // F3
|
|
#define DIGIPOTS_I2C_SDA_Y 61 // F7
|
|
#define DIGIPOTS_I2C_SDA_Z 65 // K3
|
|
#define DIGIPOTS_I2C_SDA_E0 27 // A5
|
|
#define DIGIPOTS_I2C_SDA_E1 77 // J6
|
|
|
|
#ifndef DIGIPOT_I2C_ADDRESS_A
|
|
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
|
|
#endif
|
|
#define DIGIPOT_ENABLE_I2C_PULLUPS // MightyBoard doesn't have hardware I2C pin pull-ups.
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
// K7 - 69 / ADC15 - 15
|
|
#define TEMP_BED_PIN 15
|
|
|
|
// SPI for MAX Thermocouple
|
|
// Uses a separate SPI bus
|
|
//
|
|
// 3 E5 DO (SO)
|
|
// 5 E3 CS1
|
|
// 2 E4 CS2
|
|
// 78 E2 SCK
|
|
//
|
|
#define TEMP_0_CS_PIN 5 // E3
|
|
#define TEMP_0_SCK_PIN 78 // E2
|
|
#define TEMP_0_MISO_PIN 3 // E5
|
|
//#define TEMP_0_MOSI_PIN ... // For MAX31865
|
|
|
|
#define TEMP_1_CS_PIN 2 // E4
|
|
#define TEMP_1_SCK_PIN TEMP_0_SCK_PIN
|
|
#define TEMP_1_MISO_PIN TEMP_0_MISO_PIN
|
|
//#define TEMP_1_MOSI_PIN TEMP_0_MOSI_PIN
|
|
|
|
//
|
|
// Augmentation for auto-assigning plugs
|
|
//
|
|
// Two thermocouple connectors allows for either
|
|
// 2 extruders or 1 extruder and a heated bed.
|
|
// With no heated bed, an additional 24V fan is possible.
|
|
//
|
|
|
|
// Labels from the schematic:
|
|
#define EX1_HEAT_PIN 6 // H3
|
|
#define EX1_FAN_PIN 7 // H4
|
|
#define EX2_HEAT_PIN 11 // B5
|
|
#define EX2_FAN_PIN 12 // B6
|
|
#define HBP_PIN 45 // L4
|
|
#define EXTRA_FET_PIN 44 // L5
|
|
|
|
#if HAS_MULTI_HOTEND
|
|
#if TEMP_SENSOR_BED
|
|
#define IS_EEB
|
|
#else
|
|
#define IS_EEF
|
|
#endif
|
|
#elif TEMP_SENSOR_BED
|
|
#define IS_EFB
|
|
#else
|
|
#define IS_EFF
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans (24V)
|
|
//
|
|
#define HEATER_0_PIN EX1_HEAT_PIN
|
|
|
|
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
|
|
#define HEATER_BED_PIN HBP_PIN
|
|
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
|
|
#define HEATER_1_PIN EX2_HEAT_PIN
|
|
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
|
|
#define HEATER_1_PIN EX2_HEAT_PIN
|
|
#define HEATER_BED_PIN HBP_PIN
|
|
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
|
|
#define FAN1_PIN HBP_PIN
|
|
#endif
|
|
|
|
#ifndef FAN_PIN
|
|
#if EITHER(IS_EFB, IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
|
|
#define FAN_PIN EX2_HEAT_PIN
|
|
#elif EITHER(IS_EEF, IS_SF) // Hotend, Hotend, Fan or Spindle, Fan
|
|
#define FAN_PIN HBP_PIN
|
|
#else
|
|
#define FAN_PIN EXTRA_FET_PIN
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef CONTROLLER_FAN_PIN
|
|
#define CONTROLLER_FAN_PIN EX2_FAN_PIN
|
|
#endif
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define LED_PIN 13 // B7
|
|
#define CUTOFF_RESET_PIN 16 // H1
|
|
#define CUTOFF_TEST_PIN 17 // H0
|
|
#define CUTOFF_SR_CHECK_PIN 70 // G4 (TOSC1)
|
|
|
|
//
|
|
// LCD / Controller
|
|
//
|
|
#if HAS_WIRED_LCD
|
|
|
|
#if IS_RRD_FG_SC
|
|
|
|
#define LCD_PINS_RS 33 // C4: LCD-STROBE
|
|
#define LCD_PINS_ENABLE 72 // J2: LEFT
|
|
#define LCD_PINS_D4 35 // C2: LCD-CLK
|
|
#define LCD_PINS_D5 32 // C5: RLED
|
|
#define LCD_PINS_D6 34 // C3: LCD-DATA
|
|
#define LCD_PINS_D7 31 // C6: GLED
|
|
|
|
#define BTN_EN2 75 // J4, UP
|
|
#define BTN_EN1 73 // J3, DOWN
|
|
//STOP button connected as KILL_PIN
|
|
#define KILL_PIN 14 // J1, RIGHT
|
|
//KILL - not connected
|
|
|
|
#define BEEPER_PIN 8 // H5, SD_WP
|
|
|
|
//on board leds
|
|
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
|
|
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
|
|
|
|
#else
|
|
// Replicator uses a 3-wire SR controller with HD44780
|
|
#define SR_DATA_PIN 34 // C3
|
|
#define SR_CLK_PIN 35 // C2
|
|
#define SR_STROBE_PIN 33 // C4
|
|
|
|
#define BTN_UP 75 // J4
|
|
#define BTN_DWN 73 // J3
|
|
#define BTN_LFT 72 // J2
|
|
#define BTN_RT 14 // J1
|
|
|
|
// Disable encoder
|
|
#undef BTN_EN1
|
|
#undef BTN_EN2
|
|
|
|
#define BEEPER_PIN 4 // G5
|
|
|
|
#define STAT_LED_RED_PIN 32 // C5
|
|
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
|
|
|
|
#endif
|
|
|
|
#define BTN_CENTER 15 // J0
|
|
#define BTN_ENC BTN_CENTER
|
|
|
|
#endif // HAS_WIRED_LCD
|
|
|
|
//
|
|
// SD Card
|
|
//
|
|
#define SDSS 53 // B0
|
|
#define SD_DETECT_PIN 9 // H6
|
|
|
|
//
|
|
// TMC 220x
|
|
//
|
|
#if HAS_TMC_UART
|
|
/**
|
|
* TMC220x stepper drivers
|
|
*
|
|
* Hardware serial communication ports.
|
|
* If undefined software serial is used according to the pins below
|
|
*/
|
|
#define X_HARDWARE_SERIAL Serial2
|
|
#define Y_HARDWARE_SERIAL Serial1
|
|
|
|
/**
|
|
* Software serial
|
|
*/
|
|
|
|
#define X_SERIAL_TX_PIN 16
|
|
#define X_SERIAL_RX_PIN 17
|
|
|
|
#define Y_SERIAL_TX_PIN 18
|
|
#define Y_SERIAL_RX_PIN 19
|
|
|
|
#define Z_SERIAL_TX_PIN 41
|
|
#define Z_SERIAL_RX_PIN 66
|
|
|
|
#define E0_SERIAL_TX_PIN 40
|
|
#define E0_SERIAL_RX_PIN 67
|
|
|
|
#define E1_SERIAL_TX_PIN 37
|
|
#define E1_SERIAL_RX_PIN 68
|
|
|
|
#endif
|