mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
1105 lines
36 KiB
C++
1105 lines
36 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
//todo: add support for multiple encoders on a single axis
|
|
//todo: add z axis auto-leveling
|
|
//todo: consolidate some of the related M codes?
|
|
//todo: add endstop-replacement mode?
|
|
//todo: try faster I2C speed; tweak TWI_FREQ (400000L, or faster?); or just TWBR = ((CPU_FREQ / 400000L) - 16) / 2;
|
|
//todo: consider Marlin-optimized Wire library; i.e. MarlinWire, like MarlinSerial
|
|
|
|
|
|
#include "MarlinConfig.h"
|
|
|
|
#if ENABLED(I2C_POSITION_ENCODERS)
|
|
|
|
#include "Marlin.h"
|
|
#include "temperature.h"
|
|
#include "stepper.h"
|
|
#include "I2CPositionEncoder.h"
|
|
#include "gcode.h"
|
|
|
|
#include <Wire.h>
|
|
|
|
void I2CPositionEncoder::init(uint8_t address, AxisEnum axis) {
|
|
encoderAxis = axis;
|
|
i2cAddress = address;
|
|
|
|
initialised++;
|
|
|
|
SERIAL_ECHOPAIR("Seetting up encoder on ", axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPAIR(" axis, addr = ", address);
|
|
|
|
position = get_position();
|
|
}
|
|
|
|
void I2CPositionEncoder::update() {
|
|
if (!initialised || !homed || !active) return; //check encoder is set up and active
|
|
|
|
position = get_position();
|
|
|
|
//we don't want to stop things just because the encoder missed a message,
|
|
//so we only care about responses that indicate bad magnetic strength
|
|
|
|
if (!passes_test(false)) { //check encoder data is good
|
|
lastErrorTime = millis();
|
|
/*
|
|
if (trusted) { //commented out as part of the note below
|
|
trusted = false;
|
|
SERIAL_ECHOPGM("Fault detected on ");
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis encoder. Disengaging error correction until module is trusted again.");
|
|
}
|
|
*/
|
|
return;
|
|
}
|
|
|
|
if (!trusted) {
|
|
/**
|
|
* This is commented out because it introduces error and can cause bad print quality.
|
|
*
|
|
* This code is intended to manage situations where the encoder has reported bad magnetic strength.
|
|
* This indicates that the magnetic strip was too far away from the sensor to reliably track position.
|
|
* When this happens, this code resets the offset based on where the printer thinks it is. This has been
|
|
* shown to introduce errors in actual position which result in drifting prints and poor print quality.
|
|
* Perhaps a better method would be to disable correction on the axis with a problem, report it to the
|
|
* user via the status leds on the encoder module and prompt the user to re-home the axis at which point
|
|
* the encoder would be re-enabled.
|
|
*/
|
|
|
|
/*
|
|
// If the magnetic strength has been good for a certain time, start trusting the module again
|
|
|
|
if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) {
|
|
trusted = true;
|
|
|
|
SERIAL_ECHOPGM("Untrusted encoder module on ");
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis has been fault-free for set duration, reinstating error correction.");
|
|
|
|
//the encoder likely lost its place when the error occured, so we'll reset and use the printer's
|
|
//idea of where it the axis is to re-initialise
|
|
double position = stepper.get_axis_position_mm(encoderAxis);
|
|
long positionInTicks = position * get_ticks_unit();
|
|
|
|
//shift position from previous to current position
|
|
zeroOffset -= (positionInTicks - get_position());
|
|
|
|
#if defined(I2CPE_DEBUG)
|
|
SERIAL_ECHOPGM("Current position is ");
|
|
SERIAL_ECHOLN(position);
|
|
|
|
SERIAL_ECHOPGM("Position in encoder ticks is ");
|
|
SERIAL_ECHOLN(positionInTicks);
|
|
|
|
SERIAL_ECHOPGM("New zero-offset of ");
|
|
SERIAL_ECHOLN(zeroOffset);
|
|
|
|
SERIAL_ECHOPGM("New position reads as ");
|
|
SERIAL_ECHO(get_position());
|
|
SERIAL_ECHOPGM("(");
|
|
SERIAL_ECHO(mm_from_count(get_position()));
|
|
SERIAL_ECHOLNPGM(")");
|
|
#endif
|
|
}
|
|
*/
|
|
return;
|
|
}
|
|
|
|
lastPosition = position;
|
|
millis_t positionTime = millis();
|
|
|
|
//only do error correction if setup and enabled
|
|
if (ec && ecMethod != I2CPE_ECM_NONE) {
|
|
|
|
#if defined(I2CPE_EC_THRESH_PROPORTIONAL)
|
|
millis_t deltaTime = positionTime - lastPositionTime;
|
|
unsigned long distance = abs(position - lastPosition);
|
|
unsigned long speed = distance / deltaTime;
|
|
float threshold = constrain(speed / 50, 1, 50) * ecThreshold;
|
|
#else
|
|
float threshold = get_error_correct_threshold();
|
|
#endif
|
|
|
|
//check error
|
|
#if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
|
|
double sum = 0, diffSum = 0;
|
|
|
|
errIdx = (errIdx >= I2CPE_ERR_ARRAY_SIZE - 1) ? 0 : errIdx + 1;
|
|
err[errIdx] = get_axis_error_steps(false);
|
|
|
|
LOOP_L_N(i, I2CPE_ERR_ARRAY_SIZE) {
|
|
sum += err[i];
|
|
if (i) diffSum += abs(err[i-1] - err[i]);
|
|
}
|
|
|
|
long error = (long)(sum/(I2CPE_ERR_ARRAY_SIZE + 1)); //calculate average for error
|
|
|
|
#else
|
|
long error = get_axis_error_steps(false);
|
|
#endif
|
|
|
|
//SERIAL_ECHOPGM("Axis err*r steps: ");
|
|
//SERIAL_ECHOLN(error);
|
|
|
|
#if defined(I2CPE_ERR_THRESH_ABORT)
|
|
if (labs(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) {
|
|
//kill("Significant Error");
|
|
SERIAL_ECHOPGM("Axis error greater than set threshold, aborting!");
|
|
SERIAL_ECHOLN(error);
|
|
safe_delay(5000);
|
|
}
|
|
#endif
|
|
|
|
#if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
|
|
if (errIdx == 0) {
|
|
// in order to correct for "error" but avoid correcting for noise and non skips
|
|
// it must be > threshold and have a difference average of < 10 and be < 2000 steps
|
|
if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis] &&
|
|
diffSum < 10 * (I2CPE_ERR_ARRAY_SIZE - 1) && labs(error) < 2000) { //Check for persistent error (skip)
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOPAIR(" diffSum: ", diffSum / (I2CPE_ERR_ARRAY_SIZE - 1));
|
|
SERIAL_ECHOPAIR(" - err detected: ", error / planner.axis_steps_per_mm[encoderAxis]);
|
|
SERIAL_ECHOLNPGM("mm; correcting!");
|
|
thermalManager.babystepsTodo[encoderAxis] = -LROUND(error);
|
|
}
|
|
}
|
|
#else
|
|
if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) {
|
|
//SERIAL_ECHOLN(error);
|
|
//SERIAL_ECHOLN(position);
|
|
thermalManager.babystepsTodo[encoderAxis] = -LROUND(error/2);
|
|
}
|
|
#endif
|
|
|
|
if (labs(error) > I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) {
|
|
const millis_t ms = millis();
|
|
if (ELAPSED(ms, nextErrorCountTime)) {
|
|
SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]);
|
|
SERIAL_ECHOPAIR(" axis. error: ", (int)error);
|
|
SERIAL_ECHOLNPAIR("; diffSum: ", diffSum);
|
|
errorCount++;
|
|
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
|
|
}
|
|
}
|
|
}
|
|
|
|
lastPositionTime = positionTime;
|
|
}
|
|
|
|
void I2CPositionEncoder::set_homed() {
|
|
if (active) {
|
|
reset(); // Reset module's offset to zero (so current position is homed / zero)
|
|
delay(10);
|
|
|
|
zeroOffset = get_raw_count();
|
|
homed++;
|
|
trusted++;
|
|
|
|
#if defined(I2CPE_DEBUG)
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOPAIR(" axis encoder homed, offset of ", zeroOffset);
|
|
SERIAL_ECHOLNPGM(" ticks.");
|
|
#endif
|
|
}
|
|
}
|
|
|
|
bool I2CPositionEncoder::passes_test(bool report) {
|
|
if (H == I2CPE_MAG_SIG_GOOD) {
|
|
if (report) {
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis encoder passes test; field strength good.");
|
|
}
|
|
return true;
|
|
} else if (H == I2CPE_MAG_SIG_MID) {
|
|
if (report) {
|
|
SERIAL_ECHOPAIR("Warning, ", axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis encoder passes test; field strength fair.");
|
|
}
|
|
return true;
|
|
} else if (H == I2CPE_MAG_SIG_BAD) {
|
|
if (report) {
|
|
SERIAL_ECHOPAIR("Warning, ", axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis magnetic strip not detected!");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
if (report) {
|
|
SERIAL_ECHOPAIR("Warning, ", axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis encoder not detected!");
|
|
}
|
|
return false;
|
|
}
|
|
|
|
double I2CPositionEncoder::get_axis_error_mm(bool report) {
|
|
double target, actual, error;
|
|
|
|
target = stepper.get_axis_position_mm(encoderAxis);
|
|
actual = mm_from_count(position);
|
|
error = actual - target;
|
|
|
|
if (labs(error) > 10000) error = 0; // ?
|
|
|
|
if (report) {
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOPAIR(" axis target: ", target);
|
|
SERIAL_ECHOPAIR(", actual: ", actual);
|
|
SERIAL_ECHOLNPAIR(", error : ",error);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
long I2CPositionEncoder::get_axis_error_steps(bool report) {
|
|
if (!active) {
|
|
if (report) {
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOLNPGM(" axis encoder not active!");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
float stepperTicksPerUnit;
|
|
long encoderTicks = position, encoderCountInStepperTicksScaled;
|
|
//long stepperTicks = stepper.position(encoderAxis);
|
|
|
|
// With a rotary encoder we're concerned with ticks/rev; whereas with a linear we're concerned with ticks/mm
|
|
stepperTicksPerUnit = (type == I2CPE_ENC_TYPE_ROTARY) ? stepperTicks : planner.axis_steps_per_mm[encoderAxis];
|
|
|
|
//convert both 'ticks' into same units / base
|
|
encoderCountInStepperTicksScaled = LROUND((stepperTicksPerUnit * encoderTicks) / encoderTicksPerUnit);
|
|
|
|
long target = stepper.position(encoderAxis),
|
|
error = (encoderCountInStepperTicksScaled - target);
|
|
|
|
//suppress discontinuities (might be caused by bad I2C readings...?)
|
|
bool suppressOutput = (labs(error - errorPrev) > 100);
|
|
|
|
if (report) {
|
|
SERIAL_ECHO(axis_codes[encoderAxis]);
|
|
SERIAL_ECHOPAIR(" axis target: ", target);
|
|
SERIAL_ECHOPAIR(", actual: ", encoderCountInStepperTicksScaled);
|
|
SERIAL_ECHOLNPAIR(", error : ", error);
|
|
|
|
if (suppressOutput) SERIAL_ECHOLNPGM("Discontinuity detected, suppressing error.");
|
|
}
|
|
|
|
errorPrev = error;
|
|
|
|
return (suppressOutput ? 0 : error);
|
|
}
|
|
|
|
long I2CPositionEncoder::get_raw_count() {
|
|
uint8_t index = 0;
|
|
i2cLong encoderCount;
|
|
|
|
encoderCount.val = 0x00;
|
|
|
|
if (Wire.requestFrom((int)i2cAddress, 3) != 3) {
|
|
//houston, we have a problem...
|
|
H = I2CPE_MAG_SIG_NF;
|
|
return 0;
|
|
}
|
|
|
|
while (Wire.available())
|
|
encoderCount.bval[index++] = (uint8_t)Wire.read();
|
|
|
|
//extract the magnetic strength
|
|
H = (B00000011 & (encoderCount.bval[2] >> 6));
|
|
|
|
//extract sign bit; sign = (encoderCount.bval[2] & B00100000);
|
|
//set all upper bits to the sign value to overwrite H
|
|
encoderCount.val = (encoderCount.bval[2] & B00100000) ? (encoderCount.val | 0xFFC00000) : (encoderCount.val & 0x003FFFFF);
|
|
|
|
if (invert) encoderCount.val *= -1;
|
|
|
|
return encoderCount.val;
|
|
}
|
|
|
|
bool I2CPositionEncoder::test_axis() {
|
|
//only works on XYZ cartesian machines for the time being
|
|
if (!(encoderAxis == X_AXIS || encoderAxis == Y_AXIS || encoderAxis == Z_AXIS)) return false;
|
|
|
|
int feedrate;
|
|
float startPosition, endPosition;
|
|
float startCoord[NUM_AXIS] = {0}, endCoord[NUM_AXIS] = {0};
|
|
|
|
startPosition = soft_endstop_min[encoderAxis] + 10;
|
|
endPosition = soft_endstop_max[encoderAxis] - 10;
|
|
|
|
feedrate = (int)MMM_TO_MMS((encoderAxis == Z_AXIS) ? HOMING_FEEDRATE_Z : HOMING_FEEDRATE_XY);
|
|
|
|
ec = false;
|
|
|
|
LOOP_NA(i) {
|
|
startCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
|
|
endCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
|
|
}
|
|
|
|
startCoord[encoderAxis] = startPosition;
|
|
endCoord[encoderAxis] = endPosition;
|
|
|
|
stepper.synchronize();
|
|
|
|
planner.buffer_line(startCoord[X_AXIS],startCoord[Y_AXIS],startCoord[Z_AXIS],
|
|
stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
|
|
stepper.synchronize();
|
|
|
|
// if the module isn't currently trusted, wait until it is (or until it should be if things are working)
|
|
if (!trusted) {
|
|
long startWaitingTime = millis();
|
|
while (!trusted && millis() - startWaitingTime < I2CPE_TIME_TRUSTED)
|
|
safe_delay(500);
|
|
}
|
|
|
|
if (trusted) { // if trusted, commence test
|
|
planner.buffer_line(endCoord[X_AXIS], endCoord[Y_AXIS], endCoord[Z_AXIS],
|
|
stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
|
|
stepper.synchronize();
|
|
}
|
|
|
|
return trusted;
|
|
}
|
|
|
|
void I2CPositionEncoder::calibrate_steps_mm(int iter) {
|
|
if (type != I2CPE_ENC_TYPE_LINEAR) {
|
|
SERIAL_ECHOLNPGM("Steps per mm calibration is only available using linear encoders.");
|
|
return;
|
|
}
|
|
|
|
if (!(encoderAxis == X_AXIS || encoderAxis == Y_AXIS || encoderAxis == Z_AXIS)) {
|
|
SERIAL_ECHOLNPGM("Automatic steps / mm calibration not supported for this axis.");
|
|
return;
|
|
}
|
|
|
|
float oldStepsMm, newStepsMm,
|
|
startDistance, endDistance,
|
|
travelDistance, travelledDistance, total = 0,
|
|
startCoord[NUM_AXIS] = {0}, endCoord[NUM_AXIS] = {0};
|
|
|
|
double feedrate;
|
|
|
|
long startCount, stopCount;
|
|
|
|
feedrate = MMM_TO_MMS((encoderAxis == Z_AXIS) ? HOMING_FEEDRATE_Z : HOMING_FEEDRATE_XY);
|
|
|
|
bool oldec = ec;
|
|
ec = false;
|
|
|
|
startDistance = 20;
|
|
endDistance = soft_endstop_max[encoderAxis] - 20;
|
|
travelDistance = endDistance - startDistance;
|
|
|
|
LOOP_NA(i) {
|
|
startCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
|
|
endCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
|
|
}
|
|
|
|
startCoord[encoderAxis] = startDistance;
|
|
endCoord[encoderAxis] = endDistance;
|
|
|
|
LOOP_L_N(i, iter) {
|
|
stepper.synchronize();
|
|
|
|
planner.buffer_line(startCoord[X_AXIS],startCoord[Y_AXIS],startCoord[Z_AXIS],
|
|
stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
|
|
stepper.synchronize();
|
|
|
|
delay(250);
|
|
startCount = get_position();
|
|
|
|
//do_blocking_move_to(endCoord[X_AXIS],endCoord[Y_AXIS],endCoord[Z_AXIS]);
|
|
|
|
planner.buffer_line(endCoord[X_AXIS],endCoord[Y_AXIS],endCoord[Z_AXIS],
|
|
stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
|
|
stepper.synchronize();
|
|
|
|
//Read encoder distance
|
|
delay(250);
|
|
stopCount = get_position();
|
|
|
|
travelledDistance = mm_from_count(abs(stopCount - startCount));
|
|
|
|
SERIAL_ECHOPAIR("Attempted to travel: ", travelDistance);
|
|
SERIAL_ECHOLNPGM("mm.");
|
|
|
|
SERIAL_ECHOPAIR("Actually travelled: ", travelledDistance);
|
|
SERIAL_ECHOLNPGM("mm.");
|
|
|
|
//Calculate new axis steps per unit
|
|
oldStepsMm = planner.axis_steps_per_mm[encoderAxis];
|
|
newStepsMm = (oldStepsMm * travelDistance) / travelledDistance;
|
|
|
|
SERIAL_ECHOLNPAIR("Old steps per mm: ", oldStepsMm);
|
|
SERIAL_ECHOLNPAIR("New steps per mm: ", newStepsMm);
|
|
|
|
//Save new value
|
|
planner.axis_steps_per_mm[encoderAxis] = newStepsMm;
|
|
|
|
if (iter > 1) {
|
|
total += newStepsMm;
|
|
|
|
// swap start and end points so next loop runs from current position
|
|
float tempCoord = startCoord[encoderAxis];
|
|
startCoord[encoderAxis] = endCoord[encoderAxis];
|
|
endCoord[encoderAxis] = tempCoord;
|
|
}
|
|
}
|
|
|
|
if (iter > 1) {
|
|
total /= (float)iter;
|
|
SERIAL_ECHOLNPAIR("Average steps per mm: ", total);
|
|
}
|
|
|
|
ec = oldec;
|
|
|
|
SERIAL_ECHOLNPGM("Calculated steps per mm has been set. Please save to EEPROM (M500) if you wish to keep these values.");
|
|
}
|
|
|
|
void I2CPositionEncoder::reset() {
|
|
Wire.beginTransmission(i2cAddress);
|
|
Wire.write(I2CPE_RESET_COUNT);
|
|
Wire.endTransmission();
|
|
|
|
#if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
|
|
ZERO(err);
|
|
#endif
|
|
}
|
|
|
|
void I2CPositionEncodersMgr::init() {
|
|
Wire.begin();
|
|
|
|
#if I2CPE_ENCODER_CNT > 0
|
|
uint8_t i = 0;
|
|
|
|
encoders[i].init(I2CPE_ENC_1_ADDR, I2CPE_ENC_1_AXIS);
|
|
|
|
#if defined(I2CPE_ENC_1_TYPE)
|
|
encoders[i].set_type(I2CPE_ENC_1_TYPE);
|
|
#endif
|
|
#if defined(I2CPE_ENC_1_TICKS_UNIT)
|
|
encoders[i].set_ticks_unit(I2CPE_ENC_1_TICKS_UNIT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_1_TICKS_REV)
|
|
encoders[i].set_stepper_ticks(I2CPE_ENC_1_TICKS_REV);
|
|
#endif
|
|
#if defined(I2CPE_ENC_1_INVERT)
|
|
encoders[i].set_inverted(I2CPE_ENC_1_INVERT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_1_EC_METHOD)
|
|
encoders[i].set_ec_method(I2CPE_ENC_1_EC_METHOD);
|
|
#endif
|
|
#if defined(I2CPE_ENC_1_EC_THRESH)
|
|
encoders[i].set_ec_threshold(I2CPE_ENC_1_EC_THRESH);
|
|
#endif
|
|
|
|
encoders[i].set_active(encoders[i].passes_test(true));
|
|
|
|
#if (I2CPE_ENC_1_AXIS == E_AXIS)
|
|
encoders[i].set_homed();
|
|
#endif
|
|
#endif
|
|
|
|
#if I2CPE_ENCODER_CNT > 1
|
|
i++;
|
|
|
|
encoders[i].init(I2CPE_ENC_2_ADDR, I2CPE_ENC_2_AXIS);
|
|
|
|
#if defined(I2CPE_ENC_2_TYPE)
|
|
encoders[i].set_type(I2CPE_ENC_2_TYPE);
|
|
#endif
|
|
#if defined(I2CPE_ENC_2_TICKS_UNIT)
|
|
encoders[i].set_ticks_unit(I2CPE_ENC_2_TICKS_UNIT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_2_TICKS_REV)
|
|
encoders[i].set_stepper_ticks(I2CPE_ENC_2_TICKS_REV);
|
|
#endif
|
|
#if defined(I2CPE_ENC_2_INVERT)
|
|
encoders[i].set_inverted(I2CPE_ENC_2_INVERT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_2_EC_METHOD)
|
|
encoders[i].set_ec_method(I2CPE_ENC_2_EC_METHOD);
|
|
#endif
|
|
#if defined(I2CPE_ENC_2_EC_THRESH)
|
|
encoders[i].set_ec_threshold(I2CPE_ENC_2_EC_THRESH);
|
|
#endif
|
|
|
|
encoders[i].set_active(encoders[i].passes_test(true));
|
|
|
|
#if (I2CPE_ENC_2_AXIS == E_AXIS)
|
|
encoders[i].set_homed();
|
|
#endif
|
|
#endif
|
|
|
|
#if I2CPE_ENCODER_CNT > 2
|
|
i++;
|
|
|
|
encoders[i].init(I2CPE_ENC_3_ADDR, I2CPE_ENC_3_AXIS);
|
|
|
|
#if defined(I2CPE_ENC_3_TYPE)
|
|
encoders[i].set_type(I2CPE_ENC_3_TYPE);
|
|
#endif
|
|
#if defined(I2CPE_ENC_3_TICKS_UNIT)
|
|
encoders[i].set_ticks_unit(I2CPE_ENC_3_TICKS_UNIT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_3_TICKS_REV)
|
|
encoders[i].set_stepper_ticks(I2CPE_ENC_3_TICKS_REV);
|
|
#endif
|
|
#if defined(I2CPE_ENC_3_INVERT)
|
|
encoders[i].set_inverted(I2CPE_ENC_3_INVERT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_3_EC_METHOD)
|
|
encoders[i].set_ec_method(I2CPE_ENC_3_EC_METHOD);
|
|
#endif
|
|
#if defined(I2CPE_ENC_3_EC_THRESH)
|
|
encoders[i].set_ec_threshold(I2CPE_ENC_3_EC_THRESH);
|
|
#endif
|
|
|
|
encoders[i].set_active(encoders[i].passes_test(true));
|
|
|
|
#if (I2CPE_ENC_3_AXIS == E_AXIS)
|
|
encoders[i].set_homed();
|
|
#endif
|
|
#endif
|
|
|
|
#if I2CPE_ENCODER_CNT > 3
|
|
i++;
|
|
|
|
encoders[i].init(I2CPE_ENC_4_ADDR, I2CPE_ENC_4_AXIS);
|
|
|
|
#if defined(I2CPE_ENC_4_TYPE)
|
|
encoders[i].set_type(I2CPE_ENC_4_TYPE);
|
|
#endif
|
|
#if defined(I2CPE_ENC_4_TICKS_UNIT)
|
|
encoders[i].set_ticks_unit(I2CPE_ENC_4_TICKS_UNIT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_4_TICKS_REV)
|
|
encoders[i].set_stepper_ticks(I2CPE_ENC_4_TICKS_REV);
|
|
#endif
|
|
#if defined(I2CPE_ENC_4_INVERT)
|
|
encoders[i].set_inverted(I2CPE_ENC_4_INVERT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_4_EC_METHOD)
|
|
encoders[i].set_ec_method(I2CPE_ENC_4_EC_METHOD);
|
|
#endif
|
|
#if defined(I2CPE_ENC_4_EC_THRESH)
|
|
encoders[i].set_ec_threshold(I2CPE_ENC_4_EC_THRESH);
|
|
#endif
|
|
|
|
encoders[i].set_active(encoders[i].passes_test(true));
|
|
|
|
#if (I2CPE_ENC_4_AXIS == E_AXIS)
|
|
encoders[i].set_homed();
|
|
#endif
|
|
#endif
|
|
|
|
#if I2CPE_ENCODER_CNT > 4
|
|
i++;
|
|
|
|
encoders[i].init(I2CPE_ENC_5_ADDR, I2CPE_ENC_5_AXIS);
|
|
|
|
#if defined(I2CPE_ENC_5_TYPE)
|
|
encoders[i].set_type(I2CPE_ENC_5_TYPE);
|
|
#endif
|
|
#if defined(I2CPE_ENC_5_TICKS_UNIT)
|
|
encoders[i].set_ticks_unit(I2CPE_ENC_5_TICKS_UNIT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_5_TICKS_REV)
|
|
encoders[i].set_stepper_ticks(I2CPE_ENC_5_TICKS_REV);
|
|
#endif
|
|
#if defined(I2CPE_ENC_5_INVERT)
|
|
encoders[i].set_inverted(I2CPE_ENC_5_INVERT);
|
|
#endif
|
|
#if defined(I2CPE_ENC_5_EC_METHOD)
|
|
encoders[i].set_ec_method(I2CPE_ENC_5_EC_METHOD);
|
|
#endif
|
|
#if defined(I2CPE_ENC_5_EC_THRESH)
|
|
encoders[i].set_ec_threshold(I2CPE_ENC_5_EC_THRESH);
|
|
#endif
|
|
|
|
encoders[i].set_active(encoders[i].passes_test(true));
|
|
|
|
#if (I2CPE_ENC_5_AXIS == E_AXIS)
|
|
encoders[i].set_homed();
|
|
#endif
|
|
#endif
|
|
|
|
}
|
|
|
|
void I2CPositionEncodersMgr::report_position(uint8_t idx, bool units, bool noOffset) {
|
|
CHECK_IDX
|
|
|
|
if (units) {
|
|
SERIAL_ECHOLN(noOffset ? encoders[idx].mm_from_count(encoders[idx].get_raw_count()) : encoders[idx].get_position_mm());
|
|
} else {
|
|
if (noOffset) {
|
|
long raw_count = encoders[idx].get_raw_count();
|
|
SERIAL_ECHO(axis_codes[encoders[idx].get_axis()]);
|
|
SERIAL_ECHOPGM(" ");
|
|
|
|
for (uint8_t j = 31; j > 0; j--)
|
|
SERIAL_ECHO((bool)(0x00000001 & (raw_count >> j)));
|
|
|
|
SERIAL_ECHO((bool)(0x00000001 & (raw_count)));
|
|
SERIAL_ECHOLNPAIR(" ", raw_count);
|
|
} else
|
|
SERIAL_ECHOLN(encoders[idx].get_position());
|
|
}
|
|
}
|
|
|
|
void I2CPositionEncodersMgr::change_module_address(uint8_t oldaddr, uint8_t newaddr) {
|
|
// First check 'new' address is not in use
|
|
Wire.beginTransmission(newaddr);
|
|
if (!Wire.endTransmission()) {
|
|
SERIAL_ECHOPAIR("?There is already a device with that address on the I2C bus! (", newaddr);
|
|
SERIAL_ECHOLNPGM(")");
|
|
return;
|
|
}
|
|
|
|
// Now check that we can find the module on the oldaddr address
|
|
Wire.beginTransmission(oldaddr);
|
|
if (Wire.endTransmission()) {
|
|
SERIAL_ECHOPAIR("?No module detected at this address! (", oldaddr);
|
|
SERIAL_ECHOLNPGM(")");
|
|
return;
|
|
}
|
|
|
|
SERIAL_ECHOPAIR("Module found at ", oldaddr);
|
|
SERIAL_ECHOLNPAIR(", changing address to ", newaddr);
|
|
|
|
// Change the modules address
|
|
Wire.beginTransmission(oldaddr);
|
|
Wire.write(I2CPE_SET_ADDR);
|
|
Wire.write(newaddr);
|
|
Wire.endTransmission();
|
|
|
|
SERIAL_ECHOLNPGM("Address changed, resetting and waiting for confirmation..");
|
|
|
|
// Wait for the module to reset (can probably be improved by polling address with a timeout).
|
|
safe_delay(I2CPE_REBOOT_TIME);
|
|
|
|
// Look for the module at the new address.
|
|
Wire.beginTransmission(newaddr);
|
|
if (Wire.endTransmission()) {
|
|
SERIAL_ECHOLNPGM("Address change failed! Check encoder module.");
|
|
return;
|
|
}
|
|
|
|
SERIAL_ECHOLNPGM("Address change successful!");
|
|
|
|
// Now, if this module is configured, find which encoder instance it's supposed to correspond to
|
|
// and enable it (it will likely have failed initialisation on power-up, before the address change).
|
|
int8_t idx = idx_from_addr(newaddr);
|
|
if (idx >= 0 && !encoders[idx].get_active()) {
|
|
SERIAL_ECHO(axis_codes[encoders[idx].get_axis()]);
|
|
SERIAL_ECHOLNPGM(" axis encoder was not detected on printer startup. Trying again.");
|
|
encoders[idx].set_active(encoders[idx].passes_test(true));
|
|
}
|
|
}
|
|
|
|
void I2CPositionEncodersMgr::report_module_firmware(uint8_t address) {
|
|
// First check there is a module
|
|
Wire.beginTransmission(address);
|
|
if (Wire.endTransmission()) {
|
|
SERIAL_ECHOPAIR("?No module detected at this address! (", address);
|
|
SERIAL_ECHOLNPGM(")");
|
|
return;
|
|
}
|
|
|
|
SERIAL_ECHOPAIR("Requesting version info from module at address ", address);
|
|
SERIAL_ECHOPGM(":\n");
|
|
|
|
Wire.beginTransmission(address);
|
|
Wire.write(I2CPE_SET_REPORT_MODE);
|
|
Wire.write(I2CPE_REPORT_VERSION);
|
|
Wire.endTransmission();
|
|
|
|
// Read value
|
|
if (Wire.requestFrom((int)address, 32)) {
|
|
char c;
|
|
while (Wire.available() > 0 && (c = (char)Wire.read()) > 0)
|
|
SERIAL_ECHO(c);
|
|
SERIAL_EOL();
|
|
}
|
|
|
|
// Set module back to normal (distance) mode
|
|
Wire.beginTransmission((int)address);
|
|
Wire.write(I2CPE_SET_REPORT_MODE);
|
|
Wire.write(I2CPE_REPORT_DISTANCE);
|
|
Wire.endTransmission();
|
|
}
|
|
|
|
int8_t I2CPositionEncodersMgr::parse() {
|
|
I2CPE_addr = 0;
|
|
|
|
if (parser.seen('A')) {
|
|
if (!parser.has_value()) {
|
|
SERIAL_PROTOCOLLNPGM("?A seen, but no address specified! [30-200]");
|
|
return I2CPE_PARSE_ERR;
|
|
};
|
|
|
|
I2CPE_addr = parser.value_byte();
|
|
|
|
if (!WITHIN(I2CPE_addr, 30, 200)) { // reserve the first 30 and last 55
|
|
SERIAL_PROTOCOLLNPGM("?Address out of range. [30-200]");
|
|
return I2CPE_PARSE_ERR;
|
|
}
|
|
|
|
I2CPE_idx = idx_from_addr(I2CPE_addr);
|
|
|
|
if (!WITHIN(I2CPE_idx, 0, I2CPE_ENCODER_CNT - 1)) {
|
|
SERIAL_PROTOCOLLNPGM("?No device with this address!");
|
|
return I2CPE_PARSE_ERR;
|
|
}
|
|
} else if (parser.seenval('I')) {
|
|
if (!parser.has_value()) {
|
|
SERIAL_PROTOCOLLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1);
|
|
SERIAL_ECHOLNPGM("]");
|
|
return I2CPE_PARSE_ERR;
|
|
};
|
|
|
|
I2CPE_idx = parser.value_byte();
|
|
|
|
if (!WITHIN(I2CPE_idx, 0, I2CPE_ENCODER_CNT - 1)) {
|
|
SERIAL_PROTOCOLLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1);
|
|
SERIAL_ECHOLNPGM("]");
|
|
return I2CPE_PARSE_ERR;
|
|
}
|
|
|
|
I2CPE_addr = encoders[I2CPE_idx].get_address();
|
|
} else {
|
|
I2CPE_idx = -1;
|
|
}
|
|
|
|
I2CPE_anyaxis = parser.seen_axis();
|
|
|
|
return I2CPE_PARSE_OK;
|
|
};
|
|
|
|
/**
|
|
* M860: Report the position(s) of position encoder module(s).
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1]
|
|
* O Include homed zero-offset in returned position.
|
|
* U Units in mm or raw step count.
|
|
*
|
|
* If A or I not specified:
|
|
* X Report on X axis encoder, if present.
|
|
* Y Report on Y axis encoder, if present.
|
|
* Z Report on Z axis encoder, if present.
|
|
* E Report on E axis encoder, if present.
|
|
*
|
|
*/
|
|
void I2CPositionEncodersMgr::M860() {
|
|
if (parse()) return;
|
|
|
|
bool hasU = parser.seen('U'), hasO = parser.seen('O');
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
report_position((uint8_t)idx, hasU, hasO);
|
|
}
|
|
} else report_position((uint8_t)I2CPE_idx, hasU, hasO);
|
|
}
|
|
|
|
/**
|
|
* M861: Report the status of position encoder modules.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1]
|
|
*
|
|
* If A or I not specified:
|
|
* X Report on X axis encoder, if present.
|
|
* Y Report on Y axis encoder, if present.
|
|
* Z Report on Z axis encoder, if present.
|
|
* E Report on E axis encoder, if present.
|
|
*
|
|
*/
|
|
void I2CPositionEncodersMgr::M861() {
|
|
if (parse()) return;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
report_status((uint8_t)idx);
|
|
}
|
|
} else report_status((uint8_t)I2CPE_idx);
|
|
}
|
|
|
|
/**
|
|
* M862: Perform an axis continuity test for position encoder
|
|
* modules.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1]
|
|
*
|
|
* If A or I not specified:
|
|
* X Report on X axis encoder, if present.
|
|
* Y Report on Y axis encoder, if present.
|
|
* Z Report on Z axis encoder, if present.
|
|
* E Report on E axis encoder, if present.
|
|
*
|
|
*/
|
|
void I2CPositionEncodersMgr::M862() {
|
|
if (parse()) return;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
test_axis((uint8_t)idx);
|
|
}
|
|
} else test_axis((uint8_t)I2CPE_idx);
|
|
}
|
|
|
|
/**
|
|
* M863: Perform steps-per-mm calibration for
|
|
* position encoder modules.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1]
|
|
* P Number of rePeats/iterations.
|
|
*
|
|
* If A or I not specified:
|
|
* X Report on X axis encoder, if present.
|
|
* Y Report on Y axis encoder, if present.
|
|
* Z Report on Z axis encoder, if present.
|
|
* E Report on E axis encoder, if present.
|
|
*
|
|
*/
|
|
void I2CPositionEncodersMgr::M863() {
|
|
if (parse()) return;
|
|
|
|
int iterations = parser.seenval('P') ? constrain(parser.value_byte(), 1, 10) : 1;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
calibrate_steps_mm((uint8_t)idx, iterations);
|
|
}
|
|
} else calibrate_steps_mm((uint8_t)I2CPE_idx, iterations);
|
|
}
|
|
|
|
/**
|
|
* M864: Change position encoder module I2C address.
|
|
*
|
|
* A<addr> Module current/old I2C address. If not present,
|
|
* assumes default address (030). [30, 200].
|
|
* N<addr> Module new I2C address. [30, 200].
|
|
*
|
|
* If N not specified:
|
|
* X Use I2CPE_PRESET_ADDR_X (030).
|
|
* Y Use I2CPE_PRESET_ADDR_Y (031).
|
|
* Z Use I2CPE_PRESET_ADDR_Z (032).
|
|
* E Use I2CPE_PRESET_ADDR_E (033).
|
|
*/
|
|
void I2CPositionEncodersMgr::M864() {
|
|
uint8_t newAddress;
|
|
|
|
if (parse()) return;
|
|
|
|
if (!I2CPE_addr) I2CPE_addr = I2CPE_PRESET_ADDR_X;
|
|
|
|
if (parser.seen('N')) {
|
|
if (!parser.has_value()) {
|
|
SERIAL_PROTOCOLLNPGM("?N seen, but no address specified! [30-200]");
|
|
return;
|
|
};
|
|
|
|
newAddress = parser.value_byte();
|
|
|
|
if (!WITHIN(newAddress, 30, 200)) {
|
|
SERIAL_PROTOCOLLNPGM("?New address out of range. [30-200]");
|
|
return;
|
|
}
|
|
} else if (!I2CPE_anyaxis) {
|
|
SERIAL_PROTOCOLLNPGM("?You must specify N or [XYZE].");
|
|
return;
|
|
} else {
|
|
if (parser.seen('X')) newAddress = I2CPE_PRESET_ADDR_X;
|
|
else if (parser.seen('Y')) newAddress = I2CPE_PRESET_ADDR_Y;
|
|
else if (parser.seen('Z')) newAddress = I2CPE_PRESET_ADDR_Z;
|
|
else if (parser.seen('E')) newAddress = I2CPE_PRESET_ADDR_E;
|
|
else return;
|
|
}
|
|
|
|
SERIAL_ECHOPAIR("Changing module at address ", I2CPE_addr);
|
|
SERIAL_ECHOLNPAIR(" to address ", newAddress);
|
|
|
|
change_module_address(I2CPE_addr, newAddress);
|
|
}
|
|
|
|
/**
|
|
* M865: Check position encoder module firmware version.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1].
|
|
*
|
|
* If A or I not specified:
|
|
* X Check X axis encoder, if present.
|
|
* Y Check Y axis encoder, if present.
|
|
* Z Check Z axis encoder, if present.
|
|
* E Check E axis encoder, if present.
|
|
*/
|
|
void I2CPositionEncodersMgr::M865() {
|
|
if (parse()) return;
|
|
|
|
if (!I2CPE_addr) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
report_module_firmware(encoders[idx].get_address());
|
|
}
|
|
} else report_module_firmware(I2CPE_addr);
|
|
}
|
|
|
|
/**
|
|
* M866: Report or reset position encoder module error
|
|
* count.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1].
|
|
* R Reset error counter.
|
|
*
|
|
* If A or I not specified:
|
|
* X Act on X axis encoder, if present.
|
|
* Y Act on Y axis encoder, if present.
|
|
* Z Act on Z axis encoder, if present.
|
|
* E Act on E axis encoder, if present.
|
|
*/
|
|
void I2CPositionEncodersMgr::M866() {
|
|
if (parse()) return;
|
|
|
|
bool hasR = parser.seen('R');
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0)) {
|
|
if (hasR) reset_error_count((uint8_t)idx, AxisEnum(i));
|
|
else report_error_count((uint8_t)idx, AxisEnum(i));
|
|
}
|
|
}
|
|
} else {
|
|
if (hasR) reset_error_count((uint8_t)I2CPE_idx, encoders[I2CPE_idx].get_axis());
|
|
else report_error_count((uint8_t)I2CPE_idx, encoders[I2CPE_idx].get_axis());
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M867: Enable/disable or toggle error correction for position encoder modules.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1].
|
|
* S<1|0> Enable/disable error correction. 1 enables, 0 disables. If not
|
|
* supplied, toggle.
|
|
*
|
|
* If A or I not specified:
|
|
* X Act on X axis encoder, if present.
|
|
* Y Act on Y axis encoder, if present.
|
|
* Z Act on Z axis encoder, if present.
|
|
* E Act on E axis encoder, if present.
|
|
*/
|
|
void I2CPositionEncodersMgr::M867() {
|
|
if (parse()) return;
|
|
|
|
int8_t onoff = parser.seenval('S') ? parser.value_int() : -1;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0)) {
|
|
if (onoff == -1) enable_ec((uint8_t)idx, !encoders[idx].get_ec_enabled(), AxisEnum(i));
|
|
else enable_ec((uint8_t)idx, (bool)onoff, AxisEnum(i));
|
|
}
|
|
}
|
|
} else {
|
|
if (onoff == -1) enable_ec((uint8_t)I2CPE_idx, !encoders[I2CPE_idx].get_ec_enabled(), encoders[I2CPE_idx].get_axis());
|
|
else enable_ec((uint8_t)I2CPE_idx, (bool)onoff, encoders[I2CPE_idx].get_axis());
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M868: Report or set position encoder module error correction
|
|
* threshold.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1].
|
|
* T New error correction threshold.
|
|
*
|
|
* If A not specified:
|
|
* X Act on X axis encoder, if present.
|
|
* Y Act on Y axis encoder, if present.
|
|
* Z Act on Z axis encoder, if present.
|
|
* E Act on E axis encoder, if present.
|
|
*/
|
|
void I2CPositionEncodersMgr::M868() {
|
|
if (parse()) return;
|
|
|
|
float newThreshold = parser.seenval('T') ? parser.value_float() : -9999;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0)) {
|
|
if (newThreshold != -9999) set_ec_threshold((uint8_t)idx, newThreshold, encoders[idx].get_axis());
|
|
else get_ec_threshold((uint8_t)idx, encoders[idx].get_axis());
|
|
}
|
|
}
|
|
} else {
|
|
if (newThreshold != -9999) set_ec_threshold((uint8_t)I2CPE_idx, newThreshold, encoders[I2CPE_idx].get_axis());
|
|
else get_ec_threshold((uint8_t)I2CPE_idx, encoders[I2CPE_idx].get_axis());
|
|
}
|
|
}
|
|
|
|
/**
|
|
* M869: Report position encoder module error.
|
|
*
|
|
* A<addr> Module I2C address. [30, 200].
|
|
* I<index> Module index. [0, I2CPE_ENCODER_CNT - 1].
|
|
*
|
|
* If A not specified:
|
|
* X Act on X axis encoder, if present.
|
|
* Y Act on Y axis encoder, if present.
|
|
* Z Act on Z axis encoder, if present.
|
|
* E Act on E axis encoder, if present.
|
|
*/
|
|
void I2CPositionEncodersMgr::M869() {
|
|
if (parse()) return;
|
|
|
|
if (I2CPE_idx < 0) {
|
|
int8_t idx;
|
|
LOOP_XYZE(i) {
|
|
if ((!I2CPE_anyaxis || parser.seen(axis_codes[i])) && ((idx = idx_from_axis(AxisEnum(i))) >= 0))
|
|
report_error((uint8_t)idx);
|
|
}
|
|
} else report_error((uint8_t)I2CPE_idx);
|
|
}
|
|
|
|
#endif
|