mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-14 14:31:33 +00:00
114 lines
3.6 KiB
C
114 lines
3.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Low level pin manipulation routines - used by all the drivers.
|
|
*
|
|
* These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
|
|
*
|
|
* Couldn't just call exact copies because the overhead killed the LCD update speed
|
|
* With an intermediate level the softspi was running in the 10-20kHz range which
|
|
* resulted in using about about 25% of the CPU's time.
|
|
*/
|
|
|
|
#ifdef TARGET_LPC1768
|
|
|
|
#include <LPC17xx.h>
|
|
#include <lpc17xx_pinsel.h>
|
|
#include "src/core/macros.h"
|
|
//#include "pinmapping.h"
|
|
|
|
#define LPC_PORT_OFFSET (0x0020)
|
|
#define LPC_PIN(pin) (1UL << pin)
|
|
#define LPC_GPIO(port) ((volatile LPC_GPIO_TypeDef *)(LPC_GPIO0_BASE + LPC_PORT_OFFSET * port))
|
|
|
|
#define INPUT 0
|
|
#define OUTPUT 1
|
|
#define INPUT_PULLUP 2
|
|
|
|
|
|
uint8_t LPC1768_PIN_PORT(const uint8_t pin);
|
|
uint8_t LPC1768_PIN_PIN(const uint8_t pin);
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// I/O functions
|
|
// As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2)
|
|
void pinMode_LCD(uint8_t pin, uint8_t mode) {
|
|
#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
|
|
#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
|
|
PINSEL_CFG_Type config = { LPC1768_PIN_PORT(pin),
|
|
LPC1768_PIN_PIN(pin),
|
|
PINSEL_FUNC_0,
|
|
PINSEL_PINMODE_TRISTATE,
|
|
PINSEL_PINMODE_NORMAL };
|
|
switch(mode) {
|
|
case INPUT:
|
|
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
|
|
PINSEL_ConfigPin(&config);
|
|
break;
|
|
case OUTPUT:
|
|
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR |= LPC_PIN(LPC1768_PIN_PIN(pin));
|
|
PINSEL_ConfigPin(&config);
|
|
break;
|
|
case INPUT_PULLUP:
|
|
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIODIR &= ~LPC_PIN(LPC1768_PIN_PIN(pin));
|
|
config.Pinmode = PINSEL_PINMODE_PULLUP;
|
|
PINSEL_ConfigPin(&config);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void u8g_SetPinOutput(uint8_t internal_pin_number) {
|
|
pinMode_LCD(internal_pin_number, 1); // OUTPUT
|
|
}
|
|
|
|
void u8g_SetPinInput(uint8_t internal_pin_number) {
|
|
pinMode_LCD(internal_pin_number, 0); // INPUT
|
|
}
|
|
|
|
void u8g_SetPinLevel(uint8_t pin, uint8_t pin_status) {
|
|
#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
|
|
#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
|
|
if (pin_status)
|
|
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOSET = LPC_PIN(LPC1768_PIN_PIN(pin));
|
|
else
|
|
LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOCLR = LPC_PIN(LPC1768_PIN_PIN(pin));
|
|
}
|
|
|
|
uint8_t u8g_GetPinLevel(uint8_t pin) {
|
|
#define LPC1768_PIN_PORT(pin) ((uint8_t)((pin >> 5) & 0b111))
|
|
#define LPC1768_PIN_PIN(pin) ((uint8_t)(pin & 0b11111))
|
|
return (uint32_t)LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOPIN & LPC_PIN(LPC1768_PIN_PIN(pin)) ? 1 : 0;
|
|
}
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // TARGET_LPC1768
|