3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-23 20:18:52 +00:00
Code Issues Releases Wiki Activity
c961dd084d
MarlinFirmware/Marlin/language_hr.h
Scott Lahteine b904b5ae8d Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00

247 lines
14 KiB
C
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Croatian (Hrvatski)
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_HR_H
#define LANGUAGE_HR_H
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
#define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.")
#define MSG_SD_INSERTED _UxGT("SD kartica umetnuta")
#define MSG_SD_REMOVED _UxGT("SD kartica uklonjena")
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#define MSG_MAIN _UxGT("Main")
#define MSG_AUTOSTART _UxGT("Auto pokretanje")
#define MSG_DISABLE_STEPPERS _UxGT("Ugasi steppere")
#define MSG_AUTO_HOME _UxGT("Automatski homing")
#define MSG_AUTO_HOME_X _UxGT("Home-aj X")
#define MSG_AUTO_HOME_Y _UxGT("Home-aj Y")
#define MSG_AUTO_HOME_Z _UxGT("Home-aj Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka")
#define MSG_LEVEL_BED_DONE _UxGT("Niveliranje gotovo!")
#define MSG_LEVEL_BED_CANCEL _UxGT("Otkaži")
#define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni")
#define MSG_SET_ORIGIN _UxGT("Postavi ishodište")
#define MSG_PREHEAT_1 _UxGT("Predgrij PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#define MSG_PREHEAT_2 _UxGT("Predgrij ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
#define MSG_COOLDOWN _UxGT("Hlađenje")
#define MSG_SWITCH_PS_ON _UxGT("Uključi napajanje")
#define MSG_SWITCH_PS_OFF _UxGT("Isključi napajanje")
#define MSG_EXTRUDE _UxGT("Extrude")
#define MSG_RETRACT _UxGT("Retract")
#define MSG_MOVE_AXIS _UxGT("Miči os")
#define MSG_LEVEL_BED _UxGT("Niveliraj bed")
#define MSG_MOVE_X _UxGT("Miči X")
#define MSG_MOVE_Y _UxGT("Miči Y")
#define MSG_MOVE_Z _UxGT("Miči Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_01MM _UxGT("Miči 0.1mm")
#define MSG_MOVE_1MM _UxGT("Miči 1mm")
#define MSG_MOVE_10MM _UxGT("Miči 10mm")
#define MSG_SPEED _UxGT("Brzina")
#define MSG_BED_Z _UxGT("Bed Z")
#define MSG_NOZZLE _UxGT("Dizna")
#define MSG_BED _UxGT("Bed")
#define MSG_FAN_SPEED _UxGT("Brzina ventilatora")
#define MSG_FLOW _UxGT("Flow")
#define MSG_CONTROL _UxGT("Control")
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Odaberi")
#define MSG_ACC _UxGT("Accel")
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_XSTEPS _UxGT("Xsteps/mm")
#define MSG_YSTEPS _UxGT("Ysteps/mm")
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
#define MSG_ESTEPS _UxGT("Esteps/mm")
#define MSG_E1STEPS _UxGT("E1steps/mm")
#define MSG_E2STEPS _UxGT("E2steps/mm")
#define MSG_E3STEPS _UxGT("E3steps/mm")
#define MSG_E4STEPS _UxGT("E4steps/mm")
#define MSG_TEMPERATURE _UxGT("Temperature")
#define MSG_MOTION _UxGT("Gibanje")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#define MSG_CONTRAST _UxGT("Kontrast LCD-a")
#define MSG_STORE_EEPROM _UxGT("Pohrani u memoriju")
#define MSG_LOAD_EEPROM _UxGT("Učitaj memoriju")
#define MSG_RESTORE_FAILSAFE _UxGT("Učitaj failsafe")
#define MSG_REFRESH _UxGT("Osvježi")
#define MSG_WATCH _UxGT("Info screen")
#define MSG_PREPARE _UxGT("Pripremi")
#define MSG_TUNE _UxGT("Tune")
#define MSG_PAUSE_PRINT _UxGT("Pauziraj print")
#define MSG_RESUME_PRINT _UxGT("Nastavi print")
#define MSG_STOP_PRINT _UxGT("Zaustavi print")
#define MSG_CARD_MENU _UxGT("Printaj s SD kartice")
#define MSG_NO_CARD _UxGT("Nema SD kartice")
#define MSG_DWELL _UxGT("Sleep...")
#define MSG_USERWAIT _UxGT("Čekaj korisnika...")
#define MSG_RESUMING _UxGT("Nastavljam print")
#define MSG_PRINT_ABORTED _UxGT("Print otkazan")
#define MSG_NO_MOVE _UxGT("No move.")
#define MSG_KILLED _UxGT("KILLED. ")
#define MSG_STOPPED _UxGT("ZAUSTAVLJEN. ")
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENTCHANGE _UxGT("Promijeni filament")
#define MSG_INIT_SDCARD _UxGT("Init. SD karticu")
#define MSG_CNG_SDCARD _UxGT("Promijeni SD karticu")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("first")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Grijanje neuspješno")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#define MSG_HALTED _UxGT("PRINTER HALTED")
#define MSG_PLEASE_RESET _UxGT("Please reset")
#define MSG_SHORT_DAY _UxGT("d") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Grijanje...")
#define MSG_HEATING_COMPLETE _UxGT("Grijanje gotovo.")
#define MSG_BED_HEATING _UxGT("Grijanje Bed-a.")
#define MSG_BED_DONE _UxGT("Bed gotov.")
#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibracija")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriraj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriraj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriraj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriraj Središte")
#define MSG_INFO_MENU _UxGT("O printeru")
#define MSG_INFO_PRINTER_MENU _UxGT("Podaci o printeru")
#define MSG_INFO_STATS_MENU _UxGT("Statistika printera")
#define MSG_INFO_BOARD_MENU _UxGT("Podaci o elektronici")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori")
#define MSG_INFO_EXTRUDERS _UxGT("Extruderi")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Upali osvjetljenje")
#define MSG_LIGHTS_OFF _UxGT("Ugasi osvjetljenje")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Broj printova")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni")
#define MSG_INFO_PRINT_TIME _UxGT("Ukupno printanja")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najduži print")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano ukupno")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Printovi")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni")
#define MSG_INFO_PRINT_TIME _UxGT("Ukupno")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najduži")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Napajanje")
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CHANGE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("CHANGE OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudiraj više")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudiranje...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_HR_H
Reference in New Issue View Git Blame Copy Permalink