mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-12-14 06:21:44 +00:00
118 lines
5.6 KiB
C
118 lines
5.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#ifndef _SANITYCHECK_AVR_8_BIT_H_
|
|
#define _SANITYCHECK_AVR_8_BIT_H_
|
|
|
|
/**
|
|
* Test AVR specific configuration values for errors at compile-time.
|
|
*/
|
|
|
|
/**
|
|
* Digipot requirement
|
|
*/
|
|
#if ENABLED(DIGIPOT_MCP4018)
|
|
#if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
|
|
|| !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
|
|
#error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
|
|
#endif
|
|
#endif
|
|
|
|
/**
|
|
* Sanity checks for Spindle / Laser
|
|
*/
|
|
#if ENABLED(SPINDLE_LASER_ENABLE)
|
|
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
|
|
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
|
|
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
|
|
#error "SPINDLE_DIR_PIN not defined."
|
|
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
|
|
#if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46))
|
|
#error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
|
|
#elif SPINDLE_LASER_POWERUP_DELAY < 1
|
|
#error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
|
|
#elif SPINDLE_LASER_POWERDOWN_DELAY < 1
|
|
#error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
|
|
#elif !defined(SPINDLE_LASER_PWM_INVERT)
|
|
#error "SPINDLE_LASER_PWM_INVERT missing."
|
|
#elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
|
|
#error "SPINDLE_LASER_PWM equation constant(s) missing."
|
|
#elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
|
|
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
|
|
#elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN
|
|
#error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop."
|
|
#elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN
|
|
#error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop."
|
|
#elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN
|
|
#error "SPINDLE_LASER_PWM pin in use by Z_STEP."
|
|
#elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
|
|
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
|
|
#elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
|
|
#elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
|
|
#elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
|
|
#elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
|
|
#elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
|
|
#elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
|
|
#elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
|
|
#elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
|
|
#elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
|
|
#elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
|
|
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY."
|
|
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z."
|
|
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN
|
|
#error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E."
|
|
#endif
|
|
#endif
|
|
#endif // SPINDLE_LASER_ENABLE
|
|
|
|
/**
|
|
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
|
|
*/
|
|
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
|
|
defined(X_HARDWARE_SERIAL ) \
|
|
|| defined(X2_HARDWARE_SERIAL) \
|
|
|| defined(Y_HARDWARE_SERIAL ) \
|
|
|| defined(Y2_HARDWARE_SERIAL) \
|
|
|| defined(Z_HARDWARE_SERIAL ) \
|
|
|| defined(Z2_HARDWARE_SERIAL) \
|
|
|| defined(E0_HARDWARE_SERIAL) \
|
|
|| defined(E1_HARDWARE_SERIAL) \
|
|
|| defined(E2_HARDWARE_SERIAL) \
|
|
|| defined(E3_HARDWARE_SERIAL) \
|
|
|| defined(E4_HARDWARE_SERIAL) )
|
|
#error "Select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
|
|
#endif
|
|
|
|
#endif // _SANITYCHECK_AVR_8_BIT_H_
|