mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-30 23:30:16 +00:00
134 lines
4.3 KiB
C
134 lines
4.3 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* RUMBA pin assignments
|
|
*/
|
|
|
|
#ifndef __AVR_ATmega2560__
|
|
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#if EXTRUDERS > 3
|
|
#error "RUMBA supports up to 3 extruders. Comment this line to keep going."
|
|
#endif
|
|
|
|
#define DEFAULT_MACHINE_NAME "Rumba"
|
|
|
|
#define X_STEP_PIN 17
|
|
#define X_DIR_PIN 16
|
|
#define X_ENABLE_PIN 48
|
|
#define X_MIN_PIN 37
|
|
#define X_MAX_PIN 36
|
|
|
|
#define Y_STEP_PIN 54
|
|
#define Y_DIR_PIN 47
|
|
#define Y_ENABLE_PIN 55
|
|
#define Y_MIN_PIN 35
|
|
#define Y_MAX_PIN 34
|
|
|
|
#define Z_STEP_PIN 57
|
|
#define Z_DIR_PIN 56
|
|
#define Z_ENABLE_PIN 62
|
|
#define Z_MIN_PIN 33
|
|
#define Z_MAX_PIN 32
|
|
|
|
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
|
// Define a pin to use as the signal pin on Arduino for the Z probe endstop.
|
|
#define Z_MIN_PROBE_PIN 33
|
|
#endif
|
|
|
|
#define E0_STEP_PIN 23
|
|
#define E0_DIR_PIN 22
|
|
#define E0_ENABLE_PIN 24
|
|
|
|
#define E1_STEP_PIN 26
|
|
#define E1_DIR_PIN 25
|
|
#define E1_ENABLE_PIN 27
|
|
|
|
#define E2_STEP_PIN 29
|
|
#define E2_DIR_PIN 28
|
|
#define E2_ENABLE_PIN 39
|
|
|
|
#define LED_PIN 13
|
|
|
|
#define FAN_PIN 7
|
|
#define FAN1_PIN 8
|
|
|
|
#define PS_ON_PIN 45
|
|
#define KILL_PIN 46
|
|
|
|
#if TEMP_SENSOR_0 != 0
|
|
#define HEATER_0_PIN 2 // EXTRUDER 1
|
|
#if TEMP_SENSOR_0 == -1
|
|
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
|
|
#else
|
|
#define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
|
|
#endif
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_1 != 0
|
|
#define HEATER_1_PIN 3 // EXTRUDER 2
|
|
#if TEMP_SENSOR_1 == -1
|
|
#define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
|
|
#else
|
|
#define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
|
|
#endif
|
|
#endif
|
|
|
|
#if TEMP_SENSOR_2 != 0
|
|
#define HEATER_2_PIN 6 // EXTRUDER 3
|
|
#if TEMP_SENSOR_2 == -1
|
|
#define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
|
|
#else
|
|
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
|
|
#endif
|
|
#endif
|
|
|
|
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
|
|
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
|
|
|
|
#if TEMP_SENSOR_BED != 0
|
|
#define HEATER_BED_PIN 9 // BED
|
|
#if TEMP_SENSOR_BED == -1
|
|
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
|
|
#else
|
|
#define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
|
|
#endif
|
|
#endif
|
|
|
|
#define SDSS 53
|
|
#define SD_DETECT_PIN 49
|
|
#define BEEPER_PIN 44
|
|
#define LCD_PINS_RS 19
|
|
#define LCD_PINS_ENABLE 42
|
|
#define LCD_PINS_D4 18
|
|
#define LCD_PINS_D5 38
|
|
#define LCD_PINS_D6 41
|
|
#define LCD_PINS_D7 40
|
|
#define BTN_EN1 11
|
|
#define BTN_EN2 12
|
|
#define BTN_ENC 43
|
|
|
|
#define SERVO0_PIN 5
|
|
|