3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-18 08:17:18 +00:00
Code Issues Releases Wiki Activity
dac7a75054
MarlinFirmware/Marlin/example_configurations/Hephestos_2
History
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
2016-09-28 14:14:04 -05:00
..
_Bootscreen.h Updates u8glib's bmp2hex converter 2016-07-19 03:16:30 +01:00
Configuration_adv.h Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 2016-09-28 14:14:04 -05:00
Configuration.h Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 2016-09-28 14:14:04 -05:00
README.md Update the bq Hephestos 2 configuration 2016-07-13 21:06:31 +01:00

README.md

Example Configuration for BQ Hephestos 2

This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at BQ Github repository.

NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.

Changelog

  • 2016/03/01 - Initial release
  • 2016/03/21 - Activated 4-point auto leveling by default Updated miscellaneous z-probe values
  • 2016/06/21 - Disabled hot bed related options Activated software endstops SD printing now disables the heater when finished
  • 2016/07/13 - Update the DEFAULT_AXIS_STEPS_PER_UNIT for the Z axis Increased the DEFAULT_XYJERK