3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-18 08:17:18 +00:00
Code Issues Releases Wiki Activity
dac7a75054
MarlinFirmware/Marlin/example_configurations/K8400
History
esenapaj 92c03a44a9 Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents

・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h

・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section

・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h

Adjust spacing

About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA

Adjust spacing
2016-09-28 14:14:04 -05:00
..
Dual-head Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 2016-09-28 14:14:04 -05:00
Configuration_adv.h Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 2016-09-28 14:14:04 -05:00
Configuration.h Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc. 2016-09-28 14:14:04 -05:00
README.md Add a ported example configuration for the Velleman K8400 (Vertex) printer. 2016-07-03 22:09:08 +01:00

README.md

Configuration for Velleman K8400 Vertex

http://www.k8400.eu/

Configuration files for the K8400, ported upstream from the official Velleman firmware. Like it's predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.

Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /Marlin/ directory.

NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!

For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware

Original Sources

Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip