3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-01 07:42:37 +00:00
Code Issues Releases Wiki Activity
e5c6448063
MarlinFirmware/Marlin/example_configurations/Creality/Ender/README.md
Tommie Gannert f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
2018-01-15 03:39:43 -06:00

1013 B
Raw Blame History

Creality Ender Support

This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is not the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because

  • 1.0.0 had very different serial output in setup() and overall code structure.
  • 1.0.2 changed the VERSION_STRING to include a leading space, and lcd_init uses SET_INPUT instead of pinMode.

Configurations were found by seeing what code was compiled into the firmware, and constants used there.

For U8Glib, at least version 1.14 and at most 1.17 is used, because

  • 1.12 didn't have the extra speed argument to u8g_InitCom.
  • 1.13 didn't have the soft reset instruction for UC1701 initialization.
  • 1.18 has a new directory structure.

Bitmaps

The bootscreen and custom status screens come from Creality's firmware.