mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-23 20:18:52 +00:00
177 lines
17 KiB
C
177 lines
17 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Japanese (Kana)
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
|
|
#ifndef LANGUAGE_KANA_H
|
|
#define LANGUAGE_KANA_H
|
|
|
|
#define MAPPER_NON
|
|
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
|
|
#define SIMULATE_ROMFONT
|
|
#define DISPLAY_CHARSET_ISO10646_KANA
|
|
|
|
// 片仮名表示定義
|
|
#define WELCOME_MSG MACHINE_NAME " ready."
|
|
#define MSG_SD_INSERTED "\xb6\xb0\xc4\xde\x20\xbf\xb3\xc6\xad\xb3\xbb\xda\xcf\xbc\xc0" // "Card inserted"
|
|
#define MSG_SD_REMOVED "\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "Card removed"
|
|
#define MSG_MAIN "\xd2\xb2\xdd" // "Main"
|
|
#define MSG_AUTOSTART "\xbc\xde\xc4\xde\xb3\xb6\xb2\xbc" // "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "\xd3\xb0\xc0\xb0\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "Disable steppers"
|
|
#define MSG_AUTO_HOME "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3" // "Auto home"
|
|
#define MSG_LEVEL_BED_HOMING "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3" // "Homing XYZ"
|
|
#define MSG_LEVEL_BED_WAITING "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xb2\xbc" //"Click to Begin"
|
|
#define MSG_LEVEL_BED_DONE "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xdd\xd8\xae\xb3" //"Leveling Done!"
|
|
#define MSG_LEVEL_BED_CANCEL "\xc4\xd8\xd4\xd2" //"Cancel"
|
|
#define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "Set home offsets"
|
|
#define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\x20\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" //"Offsets applied"
|
|
#define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "Set origin"
|
|
#define MSG_PREHEAT_PLA "PLA \xd6\xc8\xc2" // "Preheat PLA"
|
|
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
|
|
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " \xbd\xcd\xde\xc3" // " All"
|
|
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " \xcd\xde\xaf\xc4\xde" // "Bed"
|
|
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " \xbe\xaf\xc3\xb2" // "conf"
|
|
#define MSG_PREHEAT_ABS "ABS \xd6\xc8\xc2" // "Preheat ABS"
|
|
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
|
|
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xbd\xcd\xde\xc3" // " All"
|
|
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xcd\xde\xaf\xc4\xde" // "Bed"
|
|
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xaf\xc3\xb2" // "conf"
|
|
#define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "Cooldown"
|
|
#define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "Switch power on"
|
|
#define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "Switch power off"
|
|
#define MSG_EXTRUDE "\xb5\xbc\xc0\xde\xbc" // "Extrude"
|
|
#define MSG_RETRACT "\xcb\xb7\xba\xd0\xbe\xaf\xc3\xb2" // "Retract"
|
|
#define MSG_MOVE_AXIS "\xbc\xde\xb8\xb2\xc4\xde\xb3" // "Move axis"
|
|
#define MSG_LEVEL_BED "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "Level bed"
|
|
#define MSG_MOVE_X "X\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move X"
|
|
#define MSG_MOVE_Y "Y\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move Y"
|
|
#define MSG_MOVE_Z "Z\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move Z"
|
|
#define MSG_MOVE_E "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0" // "Extruder"
|
|
#define MSG_MOVE_01MM "0.1mm \xb2\xc4\xde\xb3" // "Move 0.1mm"
|
|
#define MSG_MOVE_1MM " 1mm \xb2\xc4\xde\xb3" // "Move 1mm"
|
|
#define MSG_MOVE_10MM " 10mm \xb2\xc4\xde\xb3" // "Move 10mm"
|
|
#define MSG_SPEED "\xbd\xcb\xdf\xb0\xc4\xde" // "Speed"
|
|
#define MSG_BED_Z "Z\xb5\xcc\xbe\xaf\xc4" // "Bed Z"
|
|
#define MSG_NOZZLE "\xc9\xbd\xde\xd9" // "Nozzle"
|
|
#define MSG_BED "\xcd\xde\xaf\xc4\xde" // "Bed"
|
|
#define MSG_FAN_SPEED "\xcc\xa7\xdd\xbf\xb8\xc4\xde" // "Fan speed"
|
|
#define MSG_FLOW "\xb5\xb8\xd8\xd8\xae\xb3" // "Flow"
|
|
#define MSG_CONTROL "\xba\xdd\xc4\xdb\xb0\xd9" // "Control"
|
|
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " Min"
|
|
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " Max"
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " Fact"
|
|
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "Autotemp"
|
|
#define MSG_ON "\xb5\xdd " // "On "
|
|
#define MSG_OFF "\xb5\xcc " // "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s^2" // "Accel"
|
|
#define MSG_VXY_JERK "XY\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Z\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Vz-jerk"
|
|
#define MSG_VE_JERK "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\x20\xd4\xb8\xc4\xde" // "Ve-jerk"
|
|
#define MSG_VMAX "\xbb\xb2\xc0\xde\xb2\xcc\xa8\xb0\xc4\xde\xda\xb0\xc4 " // "Vmax "
|
|
#define MSG_X "X" // "x"
|
|
#define MSG_Y "Y" // "y"
|
|
#define MSG_Z "Z" // "z"
|
|
#define MSG_E "E" // "e"
|
|
#define MSG_VMIN "\xbb\xb2\xbc\xae\xb3\xcc\xa8\xb0\xc4\xde\xda\xb0\xc4" // "Vmin"
|
|
#define MSG_VTRAV_MIN "\xbb\xb2\xbc\xae\xb3\xc4\xd7\xcd\xde\xd9\xda\xb0\xc4" // "VTrav min"
|
|
#define MSG_AMAX "\xbb\xb2\xc0\xde\xb2\xb6\xbf\xb8\xc4\xde " // "Amax "
|
|
#define MSG_A_RETRACT "\xcb\xb7\xba\xd0\xb6\xbf\xb8\xc4\xde" // "A-retract"
|
|
#define MSG_A_TRAVEL "\xc4\xd7\xcd\xde\xd9\xb6\xbf\xb8\xc4\xde" // "A-travel"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "Temperature"
|
|
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "Motion"
|
|
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament"
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
|
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "Fil. Dia."
|
|
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast"
|
|
#define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory"
|
|
#define MSG_LOAD_EPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\xba\xd0" // "Load memory"
|
|
#define MSG_RESTORE_FAILSAFE "\xbe\xaf\xc3\xb2\xd8\xbe\xaf\xc4" // "Restore failsafe"
|
|
#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "Refresh"
|
|
#define MSG_WATCH "\xb2\xdd\xcc\xab" // "Info screen"
|
|
#define MSG_PREPARE "\xbc\xde\xad\xdd\xcb\xde\xbe\xaf\xc3\xb2" // "Prepare"
|
|
#define MSG_TUNE "\xc1\xae\xb3\xbe\xb2" // "Tune"
|
|
#define MSG_PAUSE_PRINT "\xb2\xc1\xbc\xde\xc3\xb2\xbc" // "Pause print"
|
|
#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resume print"
|
|
#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4\xc3\xb2\xbc" // "Stop print"
|
|
#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "Print from SD"
|
|
#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "No SD card"
|
|
#define MSG_DWELL "\xbd\xd8\xb0\xcc\xdf" // "Sleep..."
|
|
#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "Wait for user..."
|
|
#define MSG_RESUMING "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resuming print"
|
|
#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "Print aborted"
|
|
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "No move."
|
|
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "KILLED. "
|
|
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "STOPPED. "
|
|
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "Swap Re.mm"
|
|
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xda\xb0\xc4 mm/s" // "Retract V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb mm" // "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "\xd8\xb6\xca\xde\xb0 +mm" // "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xd8\xb6\xca\xde\xb0S +mm" // "S UnRet+mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "\xd8\xb6\xca\xde\xb0\xda\xb0\xc4 mm/s" // "UnRet V"
|
|
#define MSG_AUTORETRACT "\xbc\xde\xc4\xde\xb3\xcb\xb7\xba\xd0" // "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xba\xb3\xb6\xdd" // "Change filament"
|
|
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "Init. SD card"
|
|
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "Change SD card"
|
|
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Z probe out. bed"
|
|
#define MSG_YX_UNHOMED "\xb9\xde\xdd\xc3\xdd\xcaXY\xb2\xc4\xde\xb3\xba\xdeZ" // "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Z Offset"
|
|
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "\xb4\xdd\xc4\xde\xbd\xc4\xaf\xcc\xdf\x20\xbb\xc4\xde\xb3" // "Endstop abort"
|
|
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xde\xb2" // "Heating failed"
|
|
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "Err: REDUNDANT TEMP"
|
|
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "THERMAL RUNAWAY"
|
|
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "Err: MAXTEMP"
|
|
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "Err: MINTEMP"
|
|
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "Err: MAXTEMP BED"
|
|
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "Err: MINTEMP BED"
|
|
#define MSG_END_HOUR "\xbc\xde\xb6\xdd" // "hours"
|
|
#define MSG_END_MINUTE "\xcc\xdd" // "minutes"
|
|
#define MSG_HEATING "\xb6\xc8\xc2\xc1\xad\xb3" // "Heating..."
|
|
#define MSG_HEATING_COMPLETE "\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Heating done."
|
|
#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xc1\xad\xb3" // "Bed Heating."
|
|
#define MSG_BED_DONE "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Bed done."
|
|
|
|
#define MSG_DELTA_CALIBRATE "\xc3\xde\xd9\xc0\x20\xba\xb3\xbe\xb2" // "Delta Calibration"
|
|
#define MSG_DELTA_CALIBRATE_X "X\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Y\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "\xc1\xad\xb3\xbc\xdd\x20\xba\xb3\xbe\xb2" // "Calibrate Center"
|
|
|
|
#endif // LANGUAGE_KANA_H
|