mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
507 lines
21 KiB
C
507 lines
21 KiB
C
#ifndef LANGUAGE_H
|
|
#define LANGUAGE_H
|
|
|
|
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
|
|
//
|
|
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
|
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
|
|
|
|
// Languages
|
|
// 1 English
|
|
// 2 -
|
|
// 3 French (Waiting translation)
|
|
// 4 German
|
|
// 5 Spanish
|
|
// 6 Etc
|
|
|
|
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
|
|
|
|
#define PROTOCOL_VERSION "1.0"
|
|
|
|
#if MOTHERBOARD == 7 || MOTHERBOARD == 71
|
|
#define MACHINE_NAME "Ultimaker"
|
|
#define FIRMWARE_URL "http://firmware.ultimaker.com"
|
|
#else
|
|
#define MACHINE_NAME "Mendel"
|
|
#define FIRMWARE_URL "http://www.mendel-parts.com"
|
|
#endif
|
|
|
|
#define STRINGIFY_(n) #n
|
|
#define STRINGIFY(n) STRINGIFY_(n)
|
|
|
|
#if LANGUAGE_CHOICE == 1
|
|
|
|
// LCD Menu Messages
|
|
#define WELCOME_MSG MACHINE_NAME " Ready."
|
|
#define MSG_SD_INSERTED "Card inserted"
|
|
#define MSG_SD_REMOVED "Card removed"
|
|
#define MSG_MAIN " Main \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Disable Steppers"
|
|
#define MSG_AUTO_HOME " Auto Home"
|
|
#define MSG_SET_ORIGIN " Set Origin"
|
|
#define MSG_PREHEAT_PLA " Preheat PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
|
|
#define MSG_PREHEAT_ABS " Preheat ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
|
|
#define MSG_COOLDOWN " Cooldown"
|
|
#define MSG_EXTRUDE " Extrude"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_PREHEAT_PLA " Preheat PLA"
|
|
#define MSG_PREHEAT_ABS " Preheat ABS"
|
|
#define MSG_MOVE_AXIS " Move Axis \x7E"
|
|
#define MSG_SPEED " Speed:"
|
|
#define MSG_NOZZLE " \002Nozzle:"
|
|
#define MSG_NOZZLE1 " \002Nozzle2:"
|
|
#define MSG_NOZZLE2 " \002Nozzle3:"
|
|
#define MSG_BED " \002Bed:"
|
|
#define MSG_FAN_SPEED " Fan speed:"
|
|
#define MSG_FLOW " Flow:"
|
|
#define MSG_CONTROL " Control \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Fact:"
|
|
#define MSG_AUTOTEMP " Autotemp:"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-retract:"
|
|
#define MSG_XSTEPS " Xsteps/mm:"
|
|
#define MSG_YSTEPS " Ysteps/mm:"
|
|
#define MSG_ZSTEPS " Zsteps/mm:"
|
|
#define MSG_ESTEPS " Esteps/mm:"
|
|
#define MSG_MAIN_WIDE " Main \003"
|
|
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
|
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperature \003"
|
|
#define MSG_MOTION_WIDE " Motion \x7E"
|
|
#define MSG_STORE_EPROM " Store memory"
|
|
#define MSG_LOAD_EPROM " Load memory"
|
|
#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
|
|
#define MSG_REFRESH "\004Refresh"
|
|
#define MSG_WATCH " Watch \003"
|
|
#define MSG_PREPARE " Prepare \x7E"
|
|
#define MSG_PREPARE_ALT " Prepare \003"
|
|
#define MSG_CONTROL_ARROW " Control \x7E"
|
|
#define MSG_RETRACT_ARROW " Retract \x7E"
|
|
#define MSG_TUNE " Tune \x7E"
|
|
#define MSG_PAUSE_PRINT " Pause Print \x7E"
|
|
#define MSG_RESUME_PRINT " Resume Print \x7E"
|
|
#define MSG_STOP_PRINT " Stop Print \x7E"
|
|
#define MSG_CARD_MENU " Card Menu \x7E"
|
|
#define MSG_NO_CARD " No Card"
|
|
#define MSG_DWELL "Sleep..."
|
|
#define MSG_USERWAIT "Wait for user..."
|
|
#define MSG_NO_MOVE "No move."
|
|
#define MSG_PART_RELEASE "Partial Release"
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_STEPPER_RELEASED "Released."
|
|
#define MSG_CONTROL_RETRACT " Retract mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retract F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_MARLIN "Marlin "
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
|
|
#define MSG_RESEND "Resend:"
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
|
|
#endif
|
|
#if LANGUAGE_CHOICE == 4
|
|
|
|
// LCD Menu Messages
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
|
|
|
#define MSG_SD_INSERTED "SDKarte erkannt"
|
|
#define MSG_SD_REMOVED "SDKarte entfernt"
|
|
#define MSG_MAIN " Hauptmneü \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Stepper abschalten"
|
|
#define MSG_AUTO_HOME " Auto Nullpunkt"
|
|
#define MSG_SET_ORIGIN " Setze Nullpunkt"
|
|
#define MSG_PREHEAT_PLA " Vorwärmen PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
|
|
#define MSG_PREHEAT_ABS " Vorwärmen ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
|
|
#define MSG_COOLDOWN " Abkühlen"
|
|
#define MSG_EXTRUDE " Extrude"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_MOVE_AXIS " Achsen bewegen\x7E"
|
|
#define MSG_SPEED " Geschw:"
|
|
#define MSG_NOZZLE " \002Düse:"
|
|
#define MSG_NOZZLE1 " \002Düse2:"
|
|
#define MSG_NOZZLE2 " \002Düse3:"
|
|
#define MSG_BED " \002Bett:"
|
|
#define MSG_FAN_SPEED " Lüftergeschw.:"
|
|
#define MSG_FLOW " Fluß:"
|
|
#define MSG_CONTROL " Einstellungen \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Faktor:"
|
|
#define MSG_AUTOTEMP " AutoTemp:"
|
|
#define MSG_ON "Ein "
|
|
#define MSG_OFF "Aus "
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-Retract:"
|
|
#define MSG_XSTEPS " Xsteps/mm:"
|
|
#define MSG_YSTEPS " Ysteps/mm:"
|
|
#define MSG_ZSTEPS " Zsteps/mm:"
|
|
#define MSG_ESTEPS " Esteps/mm:"
|
|
#define MSG_MAIN_WIDE " Hauptmenü \003"
|
|
#define MSG_RECTRACT_WIDE " Rectract \x7E"
|
|
#define MSG_WATCH " Beobachten \003"
|
|
#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperatur \003"
|
|
#define MSG_MOTION_WIDE " Bewegung \x7E"
|
|
#define MSG_STORE_EPROM " EPROM speichern"
|
|
#define MSG_LOAD_EPROM " EPROM laden"
|
|
#define MSG_RESTORE_FAILSAFE " Standardkonfig."
|
|
#define MSG_REFRESH "\004Aktualisieren"
|
|
#define MSG_PREPARE " Vorbereitung \x7E"
|
|
#define MSG_PREPARE_ALT " Vorbereitung \003"
|
|
#define MSG_CONTROL_ARROW " Einstellungen \x7E"
|
|
#define MSG_TUNE " Justierung \x7E"
|
|
#define MSG_PAUSE_PRINT " Druck anhalten\x7E"
|
|
#define MSG_RESUME_PRINT " Druck fortsetz\x7E"
|
|
#define MSG_STOP_PRINT " Druck stoppen \x7E"
|
|
#define MSG_CARD_MENU " SDKarten Menü \x7E"
|
|
#define MSG_NO_CARD " Keine SDKarte"
|
|
#define MSG_DWELL "Warten..."
|
|
#define MSG_USERWAIT "Warte auf Nutzer..."
|
|
#define MSG_NO_MOVE "Kein Zug."
|
|
#define MSG_PART_RELEASE "Stepper tlw frei"
|
|
#define MSG_KILLED "KILLED"
|
|
#define MSG_STOPPED "GESTOPPT"
|
|
#define MSG_STEPPER_RELEASED "Stepper frei"
|
|
#define MSG_CONTROL_RETRACT " Retract mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retract F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur."
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_MARLIN "Marlin: "
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
|
|
#define MSG_RESEND "Resend:"
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
|
|
#endif
|
|
|
|
#if LANGUAGE_CHOICE == 5
|
|
|
|
// LCD Menu Messages
|
|
#define WELCOME_MSG MACHINE_NAME " Lista."
|
|
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
|
|
#define MSG_SD_REMOVED "Tarjeta SD Retirada"
|
|
#define MSG_MAIN " Menu Principal \003"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Apagar Motores"
|
|
#define MSG_AUTO_HOME " Llevar Ejes al Cero"
|
|
#define MSG_SET_ORIGIN " Establecer Cero"
|
|
#define MSG_COOLDOWN " Enfriar"
|
|
#define MSG_EXTRUDE " Extruir"
|
|
#define MSG_RETRACT " Retract"
|
|
#define MSG_PREHEAT_PLA " Precalentar PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS " Precalentar PLA Setting"
|
|
#define MSG_PREHEAT_ABS " Precalentar ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS " Precalentar ABS Setting"
|
|
#define MSG_MOVE_AXIS " Mover Ejes \x7E"
|
|
#define MSG_SPEED " Velocidad:"
|
|
#define MSG_NOZZLE " \002Nozzle:"
|
|
#define MSG_NOZZLE1 " \002Nozzle2:"
|
|
#define MSG_NOZZLE2 " \002Nozzle3:"
|
|
#define MSG_BED " \002Base:"
|
|
#define MSG_FAN_SPEED " Ventilador:"
|
|
#define MSG_FLOW " Flujo:"
|
|
#define MSG_CONTROL " Control \003"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Fact:"
|
|
#define MSG_AUTOTEMP " Autotemp:"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P " PID-P: "
|
|
#define MSG_PID_I " PID-I: "
|
|
#define MSG_PID_D " PID-D: "
|
|
#define MSG_PID_C " PID-C: "
|
|
#define MSG_ACC " Acc:"
|
|
#define MSG_VXY_JERK " Vxy-jerk: "
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN " Vmin:"
|
|
#define MSG_VTRAV_MIN " VTrav min:"
|
|
#define MSG_AMAX " Amax "
|
|
#define MSG_A_RETRACT " A-retrac.:"
|
|
#define MSG_XSTEPS " Xpasos/mm:"
|
|
#define MSG_YSTEPS " Ypasos/mm:"
|
|
#define MSG_ZSTEPS " Zpasos/mm:"
|
|
#define MSG_ESTEPS " Epasos/mm:"
|
|
#define MSG_MAIN_WIDE " Menu Principal \003"
|
|
#define MSG_RECTRACT_WIDE " Retraer \x7E"
|
|
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
|
|
#define MSG_TEMPERATURE_RTN " Temperatura \003"
|
|
#define MSG_MOTION_WIDE " Movimiento \x7E"
|
|
#define MSG_STORE_EPROM " Guardar Memoria"
|
|
#define MSG_LOAD_EPROM " Cargar Memoria"
|
|
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
|
|
#define MSG_REFRESH "\004Volver a cargar"
|
|
#define MSG_WATCH " Monitorizar \003"
|
|
#define MSG_PREPARE " Preparar \x7E"
|
|
#define MSG_PREPARE_ALT " Preparar \003"
|
|
#define MSG_CONTROL_ARROW " Control \x7E"
|
|
#define MSG_RETRACT_ARROW " Retraer \x7E"
|
|
#define MSG_TUNE " Ajustar \x7E"
|
|
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
|
|
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
|
|
#define MSG_STOP_PRINT " Detener Impresion \x7E"
|
|
#define MSG_CARD_MENU " Menu de SD \x7E"
|
|
#define MSG_NO_CARD " No hay Tarjeta SD"
|
|
#define MSG_DWELL "Reposo..."
|
|
#define MSG_USERWAIT "Esperando Ordenes..."
|
|
#define MSG_NO_MOVE "Sin movimiento"
|
|
#define MSG_PART_RELEASE "Desacople Parcial"
|
|
#define MSG_KILLED "PARADA DE EMERGENCIA. "
|
|
#define MSG_STOPPED "PARADA. "
|
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
|
#define MSG_CONTROL_RETRACT " Retraer mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retraer F:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "En cola \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Externo"
|
|
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
|
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
|
#define MSG_SOFTWARE_RESET " Reset por Software"
|
|
#define MSG_MARLIN "Marlin "
|
|
#define MSG_AUTHOR " | Autor: "
|
|
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
|
|
#define MSG_FREE_MEMORY " Memoria libre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Guardado."
|
|
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
|
|
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
|
|
#define MSG_FILE_PRINTED "Impresion terminada"
|
|
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
|
|
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
|
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
|
#define MSG_HEATING "Calentando..."
|
|
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
|
|
#define MSG_BED_HEATING "Calentando la base."
|
|
#define MSG_BED_DONE "Base Caliente."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
|
|
#define MSG_COUNT_X " Cuenta X:"
|
|
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
|
|
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
|
|
#define MSG_RESEND "Reenviar:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
|
|
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
|
|
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
|
|
#define MSG_SD_CARD_OK "Tarjeta SD OK"
|
|
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
|
|
#define MSG_SD_FILE_OPENED "Archivo abierto:"
|
|
#define MSG_SD_SIZE " Tamaño:"
|
|
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
|
|
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
|
|
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:"
|
|
|
|
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
|
|
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
|
|
|
|
#endif
|
|
#endif // ifndef LANGUAGE_H
|