mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
120 lines
3.5 KiB
C
120 lines
3.5 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Brainwave 1.0 pin assignments (AT90USB646)
|
|
*
|
|
* Requires hardware bundle for Arduino:
|
|
* https://github.com/unrepentantgeek/brainwave-arduino
|
|
*/
|
|
|
|
/**
|
|
* Rev B 16 JAN 2017
|
|
*
|
|
* Added pointer to a currently available Arduino IDE extension that will
|
|
* allow this board to use the latest Marlin software
|
|
*/
|
|
|
|
/**
|
|
* Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB
|
|
* This is the only known IDE extension that is compatible with the pin definitions
|
|
* in this file, Adrduino 1.6.12 and the latest mainstream Marlin software.
|
|
*
|
|
* "Marlin_AT90USB" makes PWM0A available rather than the usual PWM1C. These PWMs share
|
|
* the same physical pin. Marlin uses TIMER1 to generate interrupts and sets it up such
|
|
* that PWM1A, PWM1B & PWM1C can not be used.
|
|
*
|
|
* Installation:
|
|
*
|
|
* 1. In the Arduino IDE, under Files -> Preferences paste the following URL
|
|
* https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json
|
|
* 2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB
|
|
* and then click on "Install"
|
|
* 3. Select "AT90USB646_STANDARD" from the 'Tools -> Boards' menu.
|
|
*/
|
|
|
|
/**
|
|
* To burn the bootloader that comes with Marlin_AT90USB:
|
|
*
|
|
* 1. Connect your programmer to the board.
|
|
* 2. In Arduino IDE select "AT90USB646_STANDARD" and then select the programmer.
|
|
* 3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
|
|
* 4. The programmer is no longer needed. Remove it.
|
|
*/
|
|
|
|
#ifndef __AVR_AT90USB646__
|
|
#error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
|
|
#endif
|
|
|
|
#define BOARD_NAME "Brainwave"
|
|
|
|
#define USBCON 646 // Disable MarlinSerial etc.
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN 7
|
|
#define Y_STOP_PIN 6
|
|
#define Z_STOP_PIN 5
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 27
|
|
#define X_DIR_PIN 29
|
|
#define X_ENABLE_PIN 28
|
|
#define X_ATT_PIN 26
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 33
|
|
#define Y_ENABLE_PIN 32
|
|
#define Y_ATT_PIN 30
|
|
|
|
#define Z_STEP_PIN 17
|
|
#define Z_DIR_PIN 19
|
|
#define Z_ENABLE_PIN 18
|
|
#define Z_ATT_PIN 16
|
|
|
|
#define E0_STEP_PIN 21
|
|
#define E0_DIR_PIN 23
|
|
#define E0_ENABLE_PIN 22
|
|
#define E0_ATT_PIN 20
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 7 // Analog Input
|
|
#define TEMP_BED_PIN 6 // Analog Input
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 4 // Extruder
|
|
#define HEATER_BED_PIN 38 // Bed
|
|
|
|
#define FAN_PIN 3 // Fan
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#define LED_PIN 39
|