MarlinFirmware

mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-01 23:58:33 +00:00

History

Damien Martin-Guillerez f73829318f Add support for the V3 of the BlTouch (#13596 ) V3 of the BLTouch has an [Alarm Release & Touch mode](https://docs.wixstatic.com/ugd/f5a1c8_77037f55e5d542309d9fc178165c9f3f.pdf) to activate after the probe is deployed. If this mode isn't activated, the BLTouch keeps deploying, ends up detecting a collision and gets itself in error mode. Tested on a Creality Ender-3.	2019-09-02 05:38:25 -05:00
..
Configuration.h	Add support for the V3 of the BlTouch (#13596 )	2019-09-02 05:38:25 -05:00
README.txt

Damien Martin-Guillerez f73829318f Add support for the V3 of the BlTouch (#13596 )

V3 of the BLTouch has an [Alarm Release & Touch mode](https://docs.wixstatic.com/ugd/f5a1c8_77037f55e5d542309d9fc178165c9f3f.pdf) to activate after the probe is deployed. If this mode isn't activated, the BLTouch keeps deploying, ends up detecting a collision and gets itself in error mode.

Tested on a Creality Ender-3.

2019-09-02 05:38:25 -05:00

Configuration.h

Add support for the V3 of the BlTouch (#13596 )

2019-09-02 05:38:25 -05:00

README.txt

This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.

(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)

The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.

The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...

Have fun!
--
tobi