mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-27 13:56:24 +00:00
139 lines
4.1 KiB
C
139 lines
4.1 KiB
C
/*
|
|
wiring_serial.c - serial functions.
|
|
Part of Arduino - http://www.arduino.cc/
|
|
|
|
Copyright (c) 2005-2006 David A. Mellis
|
|
Modified 29 January 2009, Marius Kintel for Sanguino - http://www.sanguino.cc/
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General
|
|
Public License along with this library; if not, write to the
|
|
Free Software Foundation, Inc., 59 Temple Place, Suite 330,
|
|
Boston, MA 02111-1307 USA
|
|
|
|
$Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
|
|
*/
|
|
|
|
|
|
#include "wiring_private.h"
|
|
|
|
// Define constants and variables for buffering incoming serial data. We're
|
|
// using a ring buffer (I think), in which rx_buffer_head is the index of the
|
|
// location to which to write the next incoming character and rx_buffer_tail
|
|
// is the index of the location from which to read.
|
|
#define RX_BUFFER_SIZE 128
|
|
|
|
#if defined(__AVR_ATmega644P__)
|
|
unsigned char rx_buffer[2][RX_BUFFER_SIZE];
|
|
int rx_buffer_head[2] = {0, 0};
|
|
int rx_buffer_tail[2] = {0, 0};
|
|
#else
|
|
unsigned char rx_buffer[1][RX_BUFFER_SIZE];
|
|
int rx_buffer_head[1] = {0};
|
|
int rx_buffer_tail[1] = {0};
|
|
#endif
|
|
|
|
|
|
#define BEGIN_SERIAL(uart_, baud_) \
|
|
{ \
|
|
UBRR##uart_##H = ((F_CPU / 16 + baud / 2) / baud - 1) >> 8; \
|
|
UBRR##uart_##L = ((F_CPU / 16 + baud / 2) / baud - 1); \
|
|
\
|
|
/* reset config for UART */ \
|
|
UCSR##uart_##A = 0; \
|
|
UCSR##uart_##B = 0; \
|
|
UCSR##uart_##C = 0; \
|
|
\
|
|
/* enable rx and tx */ \
|
|
sbi(UCSR##uart_##B, RXEN##uart_);\
|
|
sbi(UCSR##uart_##B, TXEN##uart_);\
|
|
\
|
|
/* enable interrupt on complete reception of a byte */ \
|
|
sbi(UCSR##uart_##B, RXCIE##uart_); \
|
|
UCSR##uart_##C = _BV(UCSZ##uart_##1)|_BV(UCSZ##uart_##0); \
|
|
/* defaults to 8-bit, no parity, 1 stop bit */ \
|
|
}
|
|
|
|
void beginSerial(uint8_t uart, long baud)
|
|
{
|
|
if (uart == 0) BEGIN_SERIAL(0, baud)
|
|
#if defined(__AVR_ATmega644P__)
|
|
else BEGIN_SERIAL(1, baud)
|
|
#endif
|
|
}
|
|
|
|
#define SERIAL_WRITE(uart_, c_) \
|
|
while (!(UCSR##uart_##A & (1 << UDRE##uart_))) \
|
|
; \
|
|
UDR##uart_ = c
|
|
|
|
void serialWrite(uint8_t uart, unsigned char c)
|
|
{
|
|
if (uart == 0) {
|
|
SERIAL_WRITE(0, c);
|
|
}
|
|
#if defined(__AVR_ATmega644P__)
|
|
else {
|
|
SERIAL_WRITE(1, c);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int serialAvailable(uint8_t uart)
|
|
{
|
|
return (RX_BUFFER_SIZE + rx_buffer_head[uart] - rx_buffer_tail[uart]) % RX_BUFFER_SIZE;
|
|
}
|
|
|
|
int serialRead(uint8_t uart)
|
|
{
|
|
// if the head isn't ahead of the tail, we don't have any characters
|
|
if (rx_buffer_head[uart] == rx_buffer_tail[uart]) {
|
|
return -1;
|
|
} else {
|
|
unsigned char c = rx_buffer[uart][rx_buffer_tail[uart]];
|
|
rx_buffer_tail[uart] = (rx_buffer_tail[uart] + 1) % RX_BUFFER_SIZE;
|
|
return c;
|
|
}
|
|
}
|
|
|
|
void serialFlush(uint8_t uart)
|
|
{
|
|
// don't reverse this or there may be problems if the RX interrupt
|
|
// occurs after reading the value of rx_buffer_head but before writing
|
|
// the value to rx_buffer_tail; the previous value of rx_buffer_head
|
|
// may be written to rx_buffer_tail, making it appear as if the buffer
|
|
// were full, not empty.
|
|
rx_buffer_head[uart] = rx_buffer_tail[uart];
|
|
}
|
|
|
|
#define UART_ISR(uart_) \
|
|
ISR(USART##uart_##_RX_vect) \
|
|
{ \
|
|
unsigned char c = UDR##uart_; \
|
|
\
|
|
int i = (rx_buffer_head[uart_] + 1) % RX_BUFFER_SIZE; \
|
|
\
|
|
/* if we should be storing the received character into the location \
|
|
just before the tail (meaning that the head would advance to the \
|
|
current location of the tail), we're about to overflow the buffer \
|
|
and so we don't write the character or advance the head. */ \
|
|
if (i != rx_buffer_tail[uart_]) { \
|
|
rx_buffer[uart_][rx_buffer_head[uart_]] = c; \
|
|
rx_buffer_head[uart_] = i; \
|
|
} \
|
|
}
|
|
|
|
UART_ISR(0)
|
|
#if defined(__AVR_ATmega644P__)
|
|
UART_ISR(1)
|
|
#endif
|