Updated Home (markdown)

Home.md

@@ -1,50 +1,31 @@
-# Marlin Firmware #
+# Marlin Firmware
 
-## About this Wiki ##
-This wiki describes official Release versions of Marlin, currently [Version 1.0.2-1](https://github.com/MarlinFirmware/Marlin/releases/tag/1.0.2-1) and the upcoming [Version 1.1.0](https://github.com/MarlinFirmware/Marlin/releases). Most of the documentation here is still under development. Please pitch in if you see any topic that needs improvement.
+## About this Wiki
+This wiki is now obsolete! For current Marlin documentation please visit the official [Marlin Website](http://marlinfw.org/). There you will find several essential guides:
 
-## Current Development ##
-For information related to **cutting-edge development and testing on Version 1.2 and beyond**, head over to the [Marlin Development Wiki](https://github.com/MarlinFirmware/MarlinDev/wiki). There you can find guidance on the new file layout, obtaining the hardware support package, and how to integrate Marlin with Arduino >= 1.6.7.
+### Overview
 
-For information related to **patching current releases and release candidates (beta releases)** see [[Reporting Bugs]] and [[Contributing]] here in this wiki.
+- [Introduction](http://marlinfw.org/docs/basics/introduction.html) - What is Marlin all about?
+- [Marlin G-code](http://marlinfw.org/meta/gcode/) - Guide to the G-code control language used by Marlin.
+- [Auto Bed Leveling](http://marlinfw.org/docs/features/auto_bed_leveling.html) - Compensating for bed imperfections.
+- [Firmware Retract](http://marlinfw.org/docs/features/fwretract.html) - Allowing the firmware to handle retraction.
+- [Linear Advance](http://marlinfw.org/docs/features/lin_advance.html) - Pressure-based extrusion eliminates ooze and produces sharper corners.
+- [Unified Bed Leveling](http://marlinfw.org/docs/features/unified_bed_leveling.html) - Next-generation leveling system with extra options.
 
-## Introduction ##
-Marlin is a highly optimized firmware for 3D printers based on AVR-based microprocessors (such as those used on the [Arduino](http://arduino.cc) platform) with movement driven by stepper motors.
+### Installation and Configuration
 
-Through the use of a programmer tool, Marlin is flashed directly onto the PROM on your 3D printer's controller board, and will thereafter run standalone. Marlin controls the input/output, voltage states, and movement of the 3D printer, taking buffered command streams from SD cards and host controllers.
+- [Downloading Marlin](http://marlinfw.org/meta/download/) - List of available downloads.
+- [Installing Marlin](http://marlinfw.org/docs/basics/install.html) - A very basic installation overview.
+- [Configuring Marlin](http://marlinfw.org/docs/configuration/configuration.html) - Configuration options in detail.
 
-Marlin aims to be adaptable to as many boards and as many configurations as possible, with a very lean default profile. Depending on configuration options, the size of the Marlin binary image may be as low as 50K or over 200K.
+### Contributing to Marlin
 
-A huge number of features are included, such as:
+- [Getting Started with Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) - How to contribute code to Marlin through Github.
+- [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) - Describes indentation, naming conventions, and other details about contributed code.
 
-* A rich dialect of [[G-Code in Marlin|G-Code]]
-* USB communication with messages for hosts
-* A growing list of [[Supported Hardware|specific boards]]. Over 40 now supported.
-* More than 20 languages supported, including Japanese and Russian
-* Support for [[LCD Controllers]] and [[SD cards]]
-* In addition to [[Cartesian_Kinematics|Cartesian]] kinematics Marlin also supports [[Delta_Kinematics|Delta]], [[SCARA_Kinematics|SCARA]], [[CoreXY]], and [[CoreXZ]]
-* Support for up to 4 extruders
-* Support for [[Thermistors]] and [[thermocouples]]
-* [[Thermal Runaway Protection]]
-* [[EEPROM]] save and restore
-* Support using switches or sensors as proximity probes
- * Probes on servo arms
- * Probes that can be picked up and dropped
- * Probes that can be enabled/disabled
-* Bed Tilt Compensation, for better results printing on a non-level bed
- * [[Mesh Bed Leveling]], with save to EEPROM
- * [[Manual Bed Leveling]], step-by-step using an LCD controller
- * [[Bed Auto Leveling]], which requires some kind of Z Probe
-* [[Firmware Retraction]], to allow retraction tuning without re-slicing
-* [[Acceleration]] and [[Jerk]] tuning, for better corners and surface finish
-* Support for [[Dual X Carriage]] setups
-* Support for [[Filament Runout Sensor]] and [[Filament Width Sensor]]
-* ...and much more!
+## Essential Marlin Resources
 
-## Essential Resources ##
-
-* [Marlin Development Repository on Github](https://github.com/MarlinFirmware/MarlinDev) – Marlin Development Central. Help design, develop, document, test, and improve Marlin 1.2 and beyond. _Arduino 1.6.7 has sub-folders, and the future is looking bright!_
-* [Marlin Release Repository on Github](https://github.com/MarlinFirmware/Marlin)
- * [Marlin Current Releases](https://github.com/MarlinFirmware/Marlin/releases) including pre-release versions
- * [Marlin Release Candidate](https://github.com/MarlinFirmware/Marlin/tree/RC) Current pre-release beta in testing
- * [The RC Bug Patch](https://github.com/MarlinFirmware/Marlin/tree/RCBugFix) is where all patches to RC are collected ahead of the next release candidate
+* [Marlin on Github](https://github.com/MarlinFirmware/Marlin) – The home of Marlin Development.
+* [Marlin Releases](https://github.com/MarlinFirmware/Marlin/release) - Listing stable releases with change-log and known issues.
+* [Marlin 1.1 "Bugfix"](https://github.com/MarlinFirmware/Marlin/tree/bugfix-1.1.x) - Current pre-release beta in development and testing.
+* [Marlin 2.0 "Bugfix"](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x) - Next-generation Marlin with 32-bit support.