3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-02-27 19:36:58 +00:00
Code Issues Releases Wiki Activity

Updated G Code in Marlin (markdown)

paulusjacobus 2016-03-08 19:48:37 +11:00
parent f06fef1da7
commit b489a4a346
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
G-Code-in-Marlin.md

@ -115,12 +115,12 @@ extrude-only move will be classified as retract depending on the direction
[[G30]] - Probe the bed Z height at the current XY position
[[G31]] - Dock Z Probe sled
[[G32]] - Undock Z Probe sled
[[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe for bed leveling (ret standard deviation)
[[M401]] - Lower auto bed leveling Z-probe with a servo, ensure you are safe above the bed to clear the Allen key
[[M48]] - Measure Z Probe repeatability. To test the accuracy of your z probe for bed leveling (returns standard deviation)
[[M401]] - Lower auto bed leveling Z-probe with a servo, ensure you are safe above the bed to clear the probe
[[M402]] - Raise Z-probe. Note: drives the servo
[[M420]] - Enable or disable Mesh Bed Leveling
[[M421]] - Set a single Mesh Bed Leveling Z coordinate: X<pos> Y<pos> Z<pos>
[[M851]] - Set/fine tune the z probe offset. M851 Z-6.90, store with M500 in EEPROM (if enabled)
[[M851]] - Custom M code in Marlin to set/fine tune the z probe offset. (i.e. probe offset = 6.90 mm: M851 Z-6.90, and store with M500 in EEPROM (if enabled))
###Filament Diameter
[[M404]] - Set (or display) Nominal Filament Diameter in mm: [N<diameter>] (e.g., 3mm or 1.75mm)