Prusa-Firmware/lang/po/Firmware_es.po

# Translation of Prusa-Firmware into Spanish.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: es\n"
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: čt 7. úno 2019 14:45:41\n"
"PO-Revision-Date: čt 7. úno 2019 14:45:41\n"
"Language-Team: \n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Last-Translator: \n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"

# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
#: messages.c:39
msgid " of 4"
msgstr " de 4"

# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
#: messages.c:56
msgid " of 9"
msgstr " de 9"

# MSG_MEASURED_OFFSET
#: ultralcd.cpp:2914
msgid "[0;0] point offset"
msgstr "[0;0] punto offset"

# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: ultralcd.cpp:4219
msgid "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
msgstr "\x1b[2JDec. choque\x1b[1;0Hpuede ser activada solo en\x1b[2;0HModo normal"

# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: ultralcd.cpp:4231
msgid "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
msgstr "\x1b[2JATENCION:\x1b[1;0HDec. choque\x1b[2;0Hdesactivada en\x1b[3;0HModo silencio"

# 
#: ultralcd.cpp:2353
msgid ">Cancel"
msgstr ""

# MSG_BABYSTEPPING_Z c=20
#: ultralcd.cpp:3043
msgid "Adjusting Z"
msgstr "Ajustar Z"

# MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ultralcd.cpp:7459
msgid "All correct      "
msgstr "Todo bien"

# MSG_WIZARD_DONE c=20 r=8
#: messages.c:95
msgid "All is done. Happy printing!"
msgstr "Terminado! Feliz impresion!"

# 
#: ultralcd.cpp:2109
msgid "Ambient"
msgstr ""

# MSG_PRESS c=20
#: ultralcd.cpp:2463
msgid "and press the knob"
msgstr "Haz clic"

# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
#: ultralcd.cpp:3330
msgid "Are left and right Z~carriages all up?"
msgstr "Carros Z izq./der. estan arriba maximo?"

# MSG_AUTO_DEPLETE_ON c=17 r=1
#: ultralcd.cpp:4959
msgid "SpoolJoin    [on]"
msgstr "SpoolJoin    [on]"

# 
#: ultralcd.cpp:4955
msgid "SpoolJoin   [N/A]"
msgstr "SpoolJoin   [N/A]"

#  MSG_AUTO_DEPLETE_OFF c=17 r=1
#: ultralcd.cpp:4963
msgid "SpoolJoin   [off]"
msgstr "SpoolJoin   [off]"

# MSG_AUTO_HOME
#: messages.c:11
msgid "Auto home"
msgstr "Llevar al origen"

# MSG_AUTOLOAD_FILAMENT c=17
#: ultralcd.cpp:6091
msgid "AutoLoad filament"
msgstr "Carga automatica de filamento"

# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
#: ultralcd.cpp:4246
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr "La carga automatica de filamento solo funciona si el sensor de filamento esta activado..."

# MSG_AUTOLOADING_ENABLED c=20 r=4
#: ultralcd.cpp:2655
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr "La carga automatica de filamento esta activada, pulse el dial e inserte el filamento..."

# MSG_SELFTEST_AXIS_LENGTH
#: ultralcd.cpp:7128
msgid "Axis length"
msgstr "Longitud del eje"

# MSG_SELFTEST_AXIS
#: ultralcd.cpp:7130
msgid "Axis"
msgstr "Eje"

# MSG_SELFTEST_BEDHEATER
#: ultralcd.cpp:7072
msgid "Bed / Heater"
msgstr "Base / Calentador"

# MSG_BED_DONE
#: messages.c:16
msgid "Bed done"
msgstr "Base preparada"

# MSG_BED_HEATING
#: messages.c:17
msgid "Bed Heating"
msgstr "Calentando Base"

# MSG_BED_CORRECTION_MENU
#: ultralcd.cpp:5197
msgid "Bed level correct"
msgstr "Corr. de la cama"

# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
#: messages.c:18
msgid "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
msgstr "Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."

# MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4
#: Marlin_main.cpp:4508
msgid "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
msgstr "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."

# MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4
#: Marlin_main.cpp:4512
msgid "Bed leveling failed. Sensor triggered too high. Waiting for reset."
msgstr "Nivelacion fallada. Sensor funciona demasiado pronto. Esperando reset."

# MSG_BED
#: messages.c:15
msgid "Bed"
msgstr "Base calefactable "

# MSG_MENU_BELT_STATUS c=15 r=1
#: ultralcd.cpp:2135
msgid "Belt status"
msgstr "Estado de la correa"

# MSG_RECOVER_PRINT c=20 r=2
#: messages.c:67
msgid "Blackout occurred. Recover print?"
msgstr "Se fue la luz. ?Reanudar la impresion?"

# 
#: ultralcd.cpp:7461
msgid "Calibrating home"
msgstr ""

# MSG_CALIBRATE_BED
#: ultralcd.cpp:5186
msgid "Calibrate XYZ"
msgstr "Calibrar XYZ"

# MSG_HOMEYZ
#: messages.c:48
msgid "Calibrate Z"
msgstr "Calibrar Z"

# MSG_CALIBRATE_PINDA c=17 r=1
#: ultralcd.cpp:4427
msgid "Calibrate"
msgstr "Calibrar"

# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ultralcd.cpp:3290
msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibrando XYZ. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."

# MSG_CALIBRATE_Z_AUTO c=20 r=2
#: messages.c:20
msgid "Calibrating Z"
msgstr "Calibrando Z"

# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ultralcd.cpp:3290
msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."

# MSG_HOMEYZ_DONE
#: ultralcd.cpp:778
msgid "Calibration done"
msgstr "Calibracion OK"

# MSG_MENU_CALIBRATION
#: messages.c:57
msgid "Calibration"
msgstr "Calibracion"

# 
#: ultralcd.cpp:4552
msgid "Cancel"
msgstr "Cancelar"

# MSG_SD_INSERTED
#: 
msgid "Card inserted"
msgstr "Tarjeta insertada"

# MSG_SD_REMOVED
#: ultralcd.cpp:7819
msgid "Card removed"
msgstr "Tarjeta retirada"

# MSG_NOT_COLOR
#: ultralcd.cpp:2563
msgid "Color not correct"
msgstr "Color no homogeneo"

# MSG_COOLDOWN
#: messages.c:23
msgid "Cooldown"
msgstr "Enfriar"

# 
#: ultralcd.cpp:4360
msgid "Copy selected language?"
msgstr "Copiar idioma seleccionado?"

# MSG_CRASHDETECT_ON
#: messages.c:27
msgid "Crash det.   [on]"
msgstr "Det. choque [act]"

# MSG_CRASHDETECT_NA
#: messages.c:25
msgid "Crash det.  [N/A]"
msgstr "Dec. choque [N/D]"

# MSG_CRASHDETECT_OFF
#: messages.c:26
msgid "Crash det.  [off]"
msgstr "Det. choque [ina]"

# MSG_CRASH_DETECTED c=20 r=1
#: messages.c:24
msgid "Crash detected."
msgstr "Choque detectado."

# 
#: Marlin_main.cpp:608
msgid "Crash detected. Resume print?"
msgstr "Choque detectado. Continuar impresion?"

# 
#: ultralcd.cpp:2013
msgid "Crash"
msgstr ""

# MSG_CURRENT c=19 r=1
#: ultralcd.cpp:5335
msgid "Current"
msgstr "Actual"

# MSG_DATE c=17 r=1
#: ultralcd.cpp:2235
msgid "Date:"
msgstr "Fecha:"

# MSG_DISABLE_STEPPERS
#: ultralcd.cpp:5093
msgid "Disable steppers"
msgstr "Apagar motores"

# MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: messages.c:14
msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
msgstr "Distancia entre la punta del boquilla y la superficie de la base aun no fijada. Por favor siga el manual, capitulo Primeros Pasos, Calibracion primera capa."

# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ultralcd.cpp:4828
msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
msgstr "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"

# MSG_EXTRUDER_CORRECTION c=9
#: ultralcd.cpp:4889
msgid "E-correct"
msgstr "E-correcion"

# MSG_EJECT_FILAMENT c=17 r=1
#: ultralcd.cpp:6081
msgid "Eject filament"
msgstr "Expulsar filamento"

# MSG_EJECT_FILAMENT1 c=17 r=1
#: ultralcd.cpp:5603
msgid "Eject filament 1"
msgstr "Expulsar filamento 1"

# MSG_EJECT_FILAMENT2 c=17 r=1
#: ultralcd.cpp:5604
msgid "Eject filament 2"
msgstr "Expulsar filamento 2"

# MSG_EJECT_FILAMENT3 c=17 r=1
#: ultralcd.cpp:5605
msgid "Eject filament 3"
msgstr "Expulsar filamento 3"

# MSG_EJECT_FILAMENT4 c=17 r=1
#: ultralcd.cpp:5606
msgid "Eject filament 4"
msgstr "Expulsar filamento 4"

# MSG_EJECT_FILAMENT5 c=17 r=1
#: ultralcd.cpp:5607
msgid "Eject filament 5"
msgstr "Expulsar filamento 5"

# 
#: ultralcd.cpp:4640
msgid "Eject"
msgstr "Expulsar"

# MSG_EJECTING_FILAMENT c=20 r=1
#: mmu.cpp:1339
msgid "Ejecting filament"
msgstr "Expulsando filamento"

# MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
#: ultralcd.cpp:7096
msgid "Endstop not hit"
msgstr "Endstop no alcanzado"

# MSG_SELFTEST_ENDSTOP
#: ultralcd.cpp:7090
msgid "Endstop"
msgstr ""

# MSG_SELFTEST_ENDSTOPS
#: ultralcd.cpp:7078
msgid "Endstops"
msgstr ""

# MSG_STACK_ERROR c=20 r=4
#: ultralcd.cpp:6132
msgid "Error - static memory has been overwritten"
msgstr "Error - se ha sobre-escrito la memoria estatica"

# MSG_FSENS_NOT_RESPONDING c=20 r=4
#: ultralcd.cpp:4259
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "ERROR: El sensor de filamento no responde, por favor comprueba la conexion."

# MSG_ERROR
#: messages.c:28
msgid "ERROR:"
msgstr ""

# 
#: Marlin_main.cpp:1006
msgid "External SPI flash W25X20CL not responding."
msgstr "No responde el flasheo externo SPI W25X20CL"

# 
#: ultralcd.cpp:5633
msgid "Extruder 1"
msgstr "Extrusor 1"

# 
#: ultralcd.cpp:5634
msgid "Extruder 2"
msgstr "Extrusor 2"

# 
#: ultralcd.cpp:5635
msgid "Extruder 3"
msgstr "Extrusor 3"

# 
#: ultralcd.cpp:5636
msgid "Extruder 4"
msgstr "Extrusor 4"

# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
#: ultralcd.cpp:7468
msgid "Extruder fan:"
msgstr "Ventilador del extrusor:"

# MSG_INFO_EXTRUDER c=15 r=1
#: ultralcd.cpp:2266
msgid "Extruder info"
msgstr "Informacion del extrusor"

# MSG_MOVE_E
#: messages.c:29
msgid "Extruder"
msgstr "Extruir"

# 
#: ultralcd.cpp:6115
msgid "Fail stats MMU"
msgstr ""

# MSG_FSENS_AUTOLOAD_ON c=17 r=1
#: ultralcd.cpp:4927
msgid "F. autoload  [on]"
msgstr "Autocarg.Fil[act]"

# MSG_FSENS_AUTOLOAD_NA c=17 r=1
#: messages.c:43
msgid "F. autoload [N/A]"
msgstr "Autocarg.Fil[N/D]"

# MSG_FSENS_AUTOLOAD_OFF c=17 r=1
#: ultralcd.cpp:4929
msgid "F. autoload [off]"
msgstr "Autocarg.Fil[ina]"

# 
#: ultralcd.cpp:6112
msgid "Fail stats"
msgstr ""

# MSG_FAN_SPEED c=14
#: messages.c:31
msgid "Fan speed"
msgstr "Velocidad Vent."

# MSG_SELFTEST_FAN c=20
#: messages.c:74
msgid "Fan test"
msgstr "Test ventiladores"

# MSG_FANS_CHECK_ON c=17 r=1
#: ultralcd.cpp:5100
msgid "Fans check   [on]"
msgstr "Comprob.vent[act]"

# MSG_FANS_CHECK_OFF c=17 r=1
#: ultralcd.cpp:5102
msgid "Fans check  [off]"
msgstr "Comprob.vent[ina]"

# MSG_FSENSOR_ON
#: messages.c:45
msgid "Fil. sensor  [on]"
msgstr "Sensor Fil. [act]"

# MSG_RESPONSE_POOR c=20 r=2
#: Marlin_main.cpp:3146
msgid "Fil. sensor response is poor, disable it?"
msgstr "La respuesta del sensor de fil es deficiente, ?desactivarlo?"

# MSG_FSENSOR_NA
#: ultralcd.cpp:4907
msgid "Fil. sensor [N/A]"
msgstr "Sensor Fil. [N/D]"

# MSG_FSENSOR_OFF
#: messages.c:44
msgid "Fil. sensor [off]"
msgstr "Sensor Fil. [ina]"

# 
#: ultralcd.cpp:2013
msgid "Filam. runouts"
msgstr ""

# MSG_FILAMENT_CLEAN c=20 r=2
#: messages.c:32
msgid "Filament extruding & with correct color?"
msgstr "Es nitido el color nuevo?"

# MSG_NOT_LOADED c=19
#: ultralcd.cpp:2559
msgid "Filament not loaded"
msgstr "Fil. no introducido"

# MSG_FILAMENT_SENSOR c=20
#: ultralcd.cpp:7144
msgid "Filament sensor"
msgstr "Sensor de filamento"

# MSG_SELFTEST_FILAMENT_SENSOR c=18
#: ultralcd.cpp:7477
msgid "Filament sensor:"
msgstr "Sensor de filamento:"

# MSG_FILAMENT_USED c=19 r=1
#: ultralcd.cpp:2725
msgid "Filament used"
msgstr "Filamento usado"

# MSG_PRINT_TIME c=19 r=1
#: ultralcd.cpp:2727
msgid "Print time"
msgstr "Tiempo de imp.:"

# MSG_FILE_INCOMPLETE c=20 r=2
#: ultralcd.cpp:7595
msgid "File incomplete. Continue anyway?"
msgstr "Archivo incompleto. ?Continuar de todos modos?"

# MSG_FINISHING_MOVEMENTS c=20 r=1
#: messages.c:40
msgid "Finishing movements"
msgstr "Term. movimientos"

# MSG_V2_CALIBRATION c=17 r=1
#: ultralcd.cpp:5177
msgid "First layer cal."
msgstr "Cal. primera cap."

# MSG_WIZARD_SELFTEST c=20 r=8
#: ultralcd.cpp:4740
msgid "First, I will run the selftest to check most common assembly problems."
msgstr "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."

# 
#: mmu.cpp:640
msgid "Fix the issue and then press button on MMU unit."
msgstr "Corrige el problema y pulsa el boton en la unidad MMU."

# MSG_FLOW
#: ultralcd.cpp:6205
msgid "Flow"
msgstr "Flujo"

# MSG_PRUSA3D_FORUM
#: ultralcd.cpp:2228
msgid "forum.prusa3d.com"
msgstr ""

# MSG_SELFTEST_COOLING_FAN c=20
#: messages.c:71
msgid "Front print fan?"
msgstr "Vent. frontal?"

# MSG_BED_CORRECTION_FRONT c=14 r=1
#: ultralcd.cpp:3101
msgid "Front side[um]"
msgstr "Frontal [um]"

# MSG_SELFTEST_FANS
#: ultralcd.cpp:7136
msgid "Front/left fans"
msgstr "Ventiladores frontal/izquierdo"

# MSG_SELFTEST_HEATERTHERMISTOR
#: ultralcd.cpp:7066
msgid "Heater/Thermistor"
msgstr "Calentador/Termistor"

# MSG_BED_HEATING_SAFETY_DISABLED
#: Marlin_main.cpp:7475
msgid "Heating disabled by safety timer."
msgstr "Calentadores desactivados por el temporizador de seguridad."

# MSG_HEATING_COMPLETE c=20
#: messages.c:47
msgid "Heating done."
msgstr "Calentamiento acabado."

# MSG_HEATING
#: messages.c:46
msgid "Heating"
msgstr "Calentando..."

# MSG_WIZARD_WELCOME c=20 r=7
#: ultralcd.cpp:4719
msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
msgstr "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"

# MSG_PRUSA3D_HOWTO
#: ultralcd.cpp:2229
msgid "howto.prusa3d.com"
msgstr ""

# 
#: ultralcd.cpp:6087
msgid "Change extruder"
msgstr "Cambiar extrusor."

# MSG_FILAMENTCHANGE
#: messages.c:37
msgid "Change filament"
msgstr "Cambiar filamento"

# MSG_CHANGE_SUCCESS
#: ultralcd.cpp:2474
msgid "Change success!"
msgstr "Cambio correcto"

# MSG_CORRECTLY c=20
#: ultralcd.cpp:2551
msgid "Changed correctly?"
msgstr "Cambio correcto?"

# MSG_SELFTEST_CHECK_BED c=20
#: messages.c:77
msgid "Checking bed     "
msgstr "Control base cal."

# MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ultralcd.cpp:7450
msgid "Checking endstops"
msgstr "Control endstops"

# MSG_SELFTEST_CHECK_HOTEND c=20
#: ultralcd.cpp:7456
msgid "Checking hotend  "
msgstr "Control fusor"

# MSG_SELFTEST_CHECK_FSENSOR c=20
#: messages.c:78
msgid "Checking sensors "
msgstr "Comprobando los sensores"

# MSG_SELFTEST_CHECK_X c=20
#: ultralcd.cpp:7451
msgid "Checking X axis  "
msgstr "Control sensor X"

# MSG_SELFTEST_CHECK_Y c=20
#: ultralcd.cpp:7452
msgid "Checking Y axis  "
msgstr "Control sensor Y"

# MSG_SELFTEST_CHECK_Z c=20
#: ultralcd.cpp:7453
msgid "Checking Z axis  "
msgstr "Control sensor Z"

# MSG_CHOOSE_EXTRUDER c=20 r=1
#: messages.c:49
msgid "Choose extruder:"
msgstr "Elegir extrusor:"

# MSG_CHOOSE_FILAMENT c=20 r=1
#: messages.c:50
msgid "Choose filament:"
msgstr "Elije filamento:"

# MSG_FILAMENT c=17 r=1
#: messages.c:30
msgid "Filament"
msgstr "Filamento"

# MSG_WIZARD_XYZ_CAL c=20 r=8
#: ultralcd.cpp:4749
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."

# MSG_WIZARD_Z_CAL c=20 r=8
#: ultralcd.cpp:4757
msgid "I will run z calibration now."
msgstr "Voy a hacer Calibracion Z ahora."

# MSG_WIZARD_V2_CAL_2 c=20 r=12
#: ultralcd.cpp:4822
msgid "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
msgstr "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el dial, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."

# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60
#: mesh_bed_calibration.cpp:2481
msgid "Improving bed calibration point"
msgstr "Mejorando punto de calibracion base"

# MSG_WATCH
#: messages.c:93
msgid "Info screen"
msgstr "Monitorizar"

# MSG_FILAMENT_LOADING_T0 c=20 r=4
#: messages.c:33
msgid "Insert filament into extruder 1. Click when done."
msgstr "Insertar filamento en el extrusor 1. Haz clic una vez terminado."

# MSG_FILAMENT_LOADING_T1 c=20 r=4
#: messages.c:34
msgid "Insert filament into extruder 2. Click when done."
msgstr "Insertar filamento en el extrusor 2. Haz clic una vez terminado."

# MSG_FILAMENT_LOADING_T2 c=20 r=4
#: messages.c:35
msgid "Insert filament into extruder 3. Click when done."
msgstr "Insertar filamento en el extrusor 3. Haz clic una vez terminado."

# MSG_FILAMENT_LOADING_T3 c=20 r=4
#: messages.c:36
msgid "Insert filament into extruder 4. Click when done."
msgstr "Insertar filamento en el extrusor 4. Haz clic una vez terminado."

# 
#: ultralcd.cpp:4782
msgid "Is filament 1 loaded?"
msgstr "?Esta cargado el filamento 1?"

# MSG_INSERT_FILAMENT c=20
#: ultralcd.cpp:2459
msgid "Insert filament"
msgstr "Introducir filamento"

# MSG_WIZARD_FILAMENT_LOADED c=20 r=2
#: ultralcd.cpp:4785
msgid "Is filament loaded?"
msgstr "Esta el filamento cargado?"

# MSG_WIZARD_PLA_FILAMENT c=20 r=2
#: ultralcd.cpp:4816
msgid "Is it PLA filament?"
msgstr "Es el filamento PLA?"

# MSG_PLA_FILAMENT_LOADED c=20 r=2
#: ultralcd.cpp:4561
msgid "Is PLA filament loaded?"
msgstr "Esta el filamento PLA cargado?"

# MSG_STEEL_SHEET_CHECK c=20 r=2
#: messages.c:86
msgid "Is steel sheet on heatbed?"
msgstr "?Esta colocada la lamina de acero sobre la base?"

# MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20
#: mesh_bed_calibration.cpp:2223
msgid "Iteration "
msgstr "Reiteracion "

# 
#: ultralcd.cpp:1976
msgid "Last print failures"
msgstr ""

# 
#: ultralcd.cpp:1960
msgid "Last print"
msgstr ""

# MSG_SELFTEST_EXTRUDER_FAN c=20
#: messages.c:72
msgid "Left hotend fan?"
msgstr "Vent. izquierdo?"

# 
#: ultralcd.cpp:2861
msgid "Left"
msgstr "Izquierda"

# MSG_BED_CORRECTION_LEFT c=14 r=1
#: ultralcd.cpp:3099
msgid "Left side [um]"
msgstr "Izquierda [um]"

# 
#: ultralcd.cpp:5107
msgid "Lin. correction"
msgstr "Correccion de Linealidad"

# MSG_BABYSTEP_Z
#: messages.c:13
msgid "Live adjust Z"
msgstr "Micropaso Eje Z"

# MSG_LOAD_FILAMENT c=17
#: messages.c:51
msgid "Load filament"
msgstr "Introducir filam."

# MSG_LOADING_COLOR
#: ultralcd.cpp:2499
msgid "Loading color"
msgstr "Cambiando color"

# MSG_LOADING_FILAMENT c=20
#: messages.c:52
msgid "Loading filament"
msgstr "Introduciendo filam."

# MSG_LOOSE_PULLEY c=20 r=1
#: ultralcd.cpp:7120
msgid "Loose pulley"
msgstr "Polea suelta"

# 
#: ultralcd.cpp:6079
msgid "Load to nozzle"
msgstr "Cargar a la boquilla"

# MSG_M117_V2_CALIBRATION c=25 r=1
#: messages.c:53
msgid "M117 First layer cal."
msgstr "M117 Cal. primera cap."

# MSG_MAIN
#: messages.c:54
msgid "Main"
msgstr "Menu principal"

# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
#: messages.c:55
msgid "Measuring reference height of calibration point"
msgstr "Midiendo altura del punto de calibracion"

# MSG_MESH_BED_LEVELING
#: ultralcd.cpp:5192
msgid "Mesh Bed Leveling"
msgstr "Nivelacion Mesh Level"

# MSG_MMU_OK_RESUMING_POSITION c=20 r=4
#: mmu.cpp:676
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Restaurando posicion..."

# MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
#: mmu.cpp:669
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Restaurando temperatura..."

# 
#: ultralcd.cpp:2896
msgid "Measured skew"
msgstr "Desviacion medida:"

# 
#: ultralcd.cpp:1977
msgid "MMU fails"
msgstr ""

# 
#: mmu.cpp:1399
msgid "MMU load failed     "
msgstr ""

# 
#: ultralcd.cpp:1977
msgid "MMU load fails"
msgstr ""

# MSG_MMU_OK_RESUMING c=20 r=4
#: mmu.cpp:687
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Resumiendo..."

# MSG_STEALTH_MODE_OFF
#: messages.c:84
msgid "Mode     [Normal]"
msgstr "Modo     [Normal]"

# MSG_SILENT_MODE_ON
#: messages.c:83
msgid "Mode     [silent]"
msgstr "Modo   [silencio]"

# 
#: mmu.cpp:635
msgid "MMU needs user attention."
msgstr "MMU necesita atencion del usuario."

# 
#: ultralcd.cpp:1994
msgid "MMU power fails"
msgstr ""

# MSG_STEALTH_MODE_ON
#: messages.c:85
msgid "Mode    [Stealth]"
msgstr "Modo   [Silencio]"

# MSG_AUTO_MODE_ON
#: messages.c:12
msgid "Mode [auto power]"
msgstr "Modo[fuerza auto]"

# MSG_SILENT_MODE_OFF
#: messages.c:82
msgid "Mode [high power]"
msgstr "Modo [rend.pleno]"

# 
#: ultralcd.cpp:2241
msgid "MMU2 connected"
msgstr ""

# MSG_SELFTEST_MOTOR
#: messages.c:79
msgid "Motor"
msgstr ""

# MSG_MOVE_AXIS
#: ultralcd.cpp:5091
msgid "Move axis"
msgstr "Mover ejes"

# MSG_MOVE_X
#: ultralcd.cpp:4164
msgid "Move X"
msgstr "Mover X"

# MSG_MOVE_Y
#: ultralcd.cpp:4165
msgid "Move Y"
msgstr "Mover Y"

# MSG_MOVE_Z
#: ultralcd.cpp:4166
msgid "Move Z"
msgstr "Mover Z"

# MSG_NO_MOVE
#: Marlin_main.cpp:4908
msgid "No move."
msgstr "Sin movimiento"

# MSG_NO_CARD
#: ultralcd.cpp:6059
msgid "No SD card"
msgstr "No hay tarjeta SD"

# 
#: ultralcd.cpp:2867
msgid "N/A"
msgstr ""

# MSG_NO
#: messages.c:58
msgid "No"
msgstr ""

# MSG_SELFTEST_NOTCONNECTED
#: ultralcd.cpp:7068
msgid "Not connected"
msgstr "No hay conexion "

# 
#: util.cpp:293
msgid "New firmware version available:"
msgstr "Nuevo firmware disponible:"

# 
#: 
msgid "No "
msgstr "No"

# MSG_SELFTEST_FAN_NO c=19
#: messages.c:75
msgid "Not spinning"
msgstr "Ventilador no gira"

# MSG_WIZARD_V2_CAL c=20 r=8
#: ultralcd.cpp:4821
msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr "Voy a calibrar la distancia entre la punta de la boquilla y la superficie de la base."

# MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ultralcd.cpp:4765
msgid "Now I will preheat nozzle for PLA."
msgstr "Voy a precalentar la boquilla para PLA ahora."

# MSG_NOZZLE
#: messages.c:59
msgid "Nozzle"
msgstr "Boquilla"

# MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
#: Marlin_main.cpp:1516
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"

# 
#: ultralcd.cpp:4756
msgid "Now remove the test print from steel sheet."
msgstr "Ahora retira la prueba de la lamina de acero."

# 
#: ultralcd.cpp:1919
msgid "Nozzle FAN"
msgstr ""

# MSG_PAUSE_PRINT
#: ultralcd.cpp:6029
msgid "Pause print"
msgstr "Pausar impresion"

# MSG_PID_RUNNING c=20 r=1
#: ultralcd.cpp:1741
msgid "PID cal.           "
msgstr "Cal. PID "

# MSG_PID_FINISHED c=20 r=1
#: ultralcd.cpp:1747
msgid "PID cal. finished"
msgstr "Cal. PID terminada"

# MSG_PID_EXTRUDER c=17 r=1
#: ultralcd.cpp:5198
msgid "PID calibration"
msgstr "Calibracion PID"

# MSG_PINDA_PREHEAT c=20 r=1
#: ultralcd.cpp:808
msgid "PINDA Heating"
msgstr "Calentando PINDA"

# MSG_PAPER c=20 r=8
#: messages.c:60
msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
msgstr "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."

# MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ultralcd.cpp:4830
msgid "Please clean heatbed and then press the knob."
msgstr "Limpia la superficie de la base, por favor, y haz clic"

# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: messages.c:22
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Limpia boquilla para calibracion. Click cuando acabes."

# MSG_SELFTEST_PLEASECHECK
#: ultralcd.cpp:7060
msgid "Please check :"
msgstr "Controla :"

# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: messages.c:94
msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
msgstr "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard"

# MSG_WIZARD_LOAD_FILAMENT c=20 r=8
#: ultralcd.cpp:4664
msgid "Please insert PLA filament to the extruder, then press knob to load it."
msgstr "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo."

# MSG_PLEASE_LOAD_PLA c=20 r=4
#: ultralcd.cpp:4566
msgid "Please load PLA filament first."
msgstr "Carga el filamento PLA primero por favor."

# MSG_CHECK_IDLER c=20 r=4
#: Marlin_main.cpp:3025
msgid "Please open idler and remove filament manually."
msgstr "Por favor abate el rodillo de empuje (idler) y retira el filamento manualmente."

# MSG_PLACE_STEEL_SHEET c=20 r=4
#: messages.c:61
msgid "Please place steel sheet on heatbed."
msgstr "Por favor coloca la chapa de acero en la base calefactable."

# MSG_PRESS_TO_UNLOAD c=20 r=4
#: messages.c:64
msgid "Please press the knob to unload filament"
msgstr "Por favor, pulsa el dial para descargar el filamento"

# 
#: ultralcd.cpp:4660
msgid "Please insert PLA filament to the first tube of MMU, then press the knob to load it."
msgstr "Por favor introduce el filamento al primer tubo MMU, despues presiona el dial para imprimirlo."

# MSG_PULL_OUT_FILAMENT c=20 r=4
#: messages.c:66
msgid "Please pull out filament immediately"
msgstr "Por favor retire el filamento de inmediato"

# MSG_EJECT_REMOVE c=20 r=4
#: mmu.cpp:1347
msgid "Please remove filament and then press the knob."
msgstr "Por favor quite el filamento y luego presione el dial."

# MSG_REMOVE_STEEL_SHEET c=20 r=4
#: messages.c:70
msgid "Please remove steel sheet from heatbed."
msgstr "Por favor retire la chapa de acero de la base calefactable."

# MSG_RUN_XYZ c=20 r=4
#: Marlin_main.cpp:4052
msgid "Please run XYZ calibration first."
msgstr "Por favor realiza la calibracion XYZ primero."

# MSG_UPDATE_MMU2_FW c=20 r=4
#: mmu.cpp:1293
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Por favor actualice el firmware en tu MMU2. Esperando el reseteo."

# MSG_PLEASE_WAIT c=20
#: messages.c:62
msgid "Please wait"
msgstr "Por Favor Espere"

# 
#: ultralcd.cpp:4755
msgid "Please remove shipping helpers first."
msgstr "Por favor retira los soportes de envio primero."

# MSG_PREHEAT_NOZZLE c=20
#: messages.c:63
msgid "Preheat the nozzle!"
msgstr "Precalienta extrusor!"

# MSG_PREHEAT
#: ultralcd.cpp:6018
msgid "Preheat"
msgstr "Precalentar"

# MSG_WIZARD_HEATING c=20 r=3
#: messages.c:96
msgid "Preheating nozzle. Please wait."
msgstr "Precalentando nozzle. Espera por favor."

# 
#: util.cpp:297
msgid "Please upgrade."
msgstr "Actualize por favor"

# MSG_PRESS_TO_PREHEAT c=20 r=4
#: Marlin_main.cpp:9150
msgid "Press knob to preheat nozzle and continue."
msgstr "Pulsa el dial para precalentar la boquilla y continue."

# 
#: ultralcd.cpp:2013
msgid "Power failures"
msgstr ""

# MSG_PRINT_ABORTED c=20
#: messages.c:65
msgid "Print aborted"
msgstr "Impresion cancelada"

# 
#: ultralcd.cpp:2350
msgid "Preheating to load"
msgstr ""

# 
#: ultralcd.cpp:2351
msgid "Preheating to unload"
msgstr ""

# MSG_SELFTEST_PRINT_FAN_SPEED c=18
#: ultralcd.cpp:7471
msgid "Print fan:"
msgstr "Ventilador del fusor:"

# MSG_CARD_MENU
#: messages.c:21
msgid "Print from SD"
msgstr "Menu tarjeta SD"

# 
#: ultralcd.cpp:2313
msgid "Press the knob"
msgstr ""

# MSG_PRINT_PAUSED c=20 r=1
#: ultralcd.cpp:1022
msgid "Print paused"
msgstr "Impresion en pausa"

# 
#: mmu.cpp:639
msgid "Press the knob to resume nozzle temperature."
msgstr "Presiona el dial para continuar con la temperatura de la boquilla."

# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: messages.c:41
msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "Impresora no esta calibrada todavia. Por favor usa el manual capitulo Primeros pasos Calibracion flujo."

# 
#: ultralcd.cpp:1921
msgid "Print FAN"
msgstr ""

# WELCOME_MSG c=20
#: 
msgid "Prusa i3 MK2.5 ready."
msgstr "Preparado para Prusa i3 MK2.5."

# WELCOME_MSG c=20
#: 
msgid "Prusa i3 MK3 ready."
msgstr "Prusa i3 MK3 prep."

# MSG_PRUSA3D
#: ultralcd.cpp:2227
msgid "prusa3d.com"
msgstr "prusa3d.es"

# MSG_BED_CORRECTION_REAR c=14 r=1
#: ultralcd.cpp:3102
msgid "Rear side [um]"
msgstr "Trasera [um]"

# MSG_RECOVERING_PRINT c=20 r=1
#: Marlin_main.cpp:8575
msgid "Recovering print    "
msgstr "Recuperando impresion"

# MSG_REMOVE_OLD_FILAMENT c=20 r=4
#: mmu.cpp:744
msgid "Remove old filament and press the knob to start loading new filament."
msgstr "Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento."

# 
#: 
msgid "Prusa i3 MK3S OK."
msgstr ""

# 
#: 
msgid "Prusa i3 MK2 ready."
msgstr "Preparado para i3 MK2."

# MSG_CALIBRATE_BED_RESET
#: ultralcd.cpp:5203
msgid "Reset XYZ calibr."
msgstr ""

# MSG_BED_CORRECTION_RESET
#: ultralcd.cpp:3103
msgid "Reset"
msgstr ""

# MSG_RESUME_PRINT
#: ultralcd.cpp:6033
msgid "Resume print"
msgstr "Reanudar impres."

# MSG_RESUMING_PRINT c=20 r=1
#: messages.c:69
msgid "Resuming print"
msgstr "Resumiendo impresion"

# MSG_BED_CORRECTION_RIGHT c=14 r=1
#: ultralcd.cpp:3100
msgid "Right side[um]"
msgstr "Derecha [um]"

# MSG_SECOND_SERIAL_ON c=17 r=1
#: ultralcd.cpp:5119
msgid "RPi port     [on]"
msgstr "Puerto RPi  [act]"

# MSG_SECOND_SERIAL_OFF c=17 r=1
#: ultralcd.cpp:5117
msgid "RPi port    [off]"
msgstr "Puerto RPi  [ina]"

# MSG_WIZARD_RERUN c=20 r=7
#: ultralcd.cpp:4583
msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?"
msgstr "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"

# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
#: ultralcd.cpp:5033
msgid "SD card  [normal]"
msgstr "Tarj. SD [normal]"

# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
#: ultralcd.cpp:5031
msgid "SD card [flshAir]"
msgstr "Tarj. SD[FlshAir]"

# 
#: ultralcd.cpp:2862
msgid "Right"
msgstr "Derecha"

# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
#: messages.c:38
msgid "Searching bed calibration point"
msgstr "Buscando punto de calibracion base"

# MSG_LANGUAGE_SELECT
#: ultralcd.cpp:5126
msgid "Select language"
msgstr "Cambiar el idioma"

# MSG_SELFTEST_OK
#: ultralcd.cpp:6631
msgid "Self test OK"
msgstr ""

# MSG_SELFTEST_START c=20
#: ultralcd.cpp:6449
msgid "Self test start  "
msgstr "Iniciar Selftest"

# MSG_SELFTEST
#: ultralcd.cpp:5179
msgid "Selftest         "
msgstr "Selftest"

# MSG_SELFTEST_ERROR
#: ultralcd.cpp:7058
msgid "Selftest error !"
msgstr "Error Selftest !"

# MSG_SELFTEST_FAILED c=20
#: messages.c:73
msgid "Selftest failed  "
msgstr "Fallo Selftest"

# MSG_FORCE_SELFTEST c=20 r=8
#: Marlin_main.cpp:1548
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr "Se realizara el auto-test para calibrar con precision la vuelta a la posicion inicial sin sensores."

# 
#: ultralcd.cpp:4803
msgid "Select nozzle preheat temperature which matches your material."
msgstr "Selecciona la temperatura para precalentar la boquilla que se ajuste a tu material. "

# 
#: ultralcd.cpp:4552
msgid "Select PLA filament:"
msgstr "Seleccionar filamento PLA:"

# MSG_SET_TEMPERATURE c=19 r=1
#: ultralcd.cpp:3111
msgid "Set temperature:"
msgstr "Establecer temp.:"

# MSG_SETTINGS
#: messages.c:81
msgid "Settings"
msgstr "Configuracion"

# MSG_SHOW_END_STOPS c=17 r=1
#: ultralcd.cpp:5200
msgid "Show end stops"
msgstr "Mostrar endstops"

# 
#: ultralcd.cpp:3819
msgid "Sensor state"
msgstr ""

# 
#: 
msgid "Sensors info"
msgstr ""

# 
#: 
msgid "Show pinda state"
msgstr "Mostrar estado pinda"

# MSG_FILE_CNT c=20 r=4
#: cardreader.cpp:738
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. "

# MSG_SORT_NONE c=17 r=1
#: ultralcd.cpp:5043
msgid "Sort:      [none]"
msgstr "Ordenar:   [nada]"

# MSG_SORT_TIME c=17 r=1
#: ultralcd.cpp:5041
msgid "Sort:      [time]"
msgstr "Orden:    [Fecha]"

# 
#: ultralcd.cpp:2899
msgid "Severe skew"
msgstr "Inclinacion severa"

# MSG_SORT_ALPHA c=17 r=1
#: ultralcd.cpp:5042
msgid "Sort:  [alphabet]"
msgstr "Ordenar:[alfabet]"

# MSG_SORTING c=20 r=1
#: cardreader.cpp:745
msgid "Sorting files"
msgstr "Ordenando archivos"

# MSG_SOUND_LOUD c=17 r=1
#: sound.h:5
msgid "Sound      [loud]"
msgstr "Sonido     [alto]"

# 
#: ultralcd.cpp:2898
msgid "Slight skew"
msgstr "Ligeramente inclinado"

# MSG_SOUND_MUTE c=17 r=1
#: sound.h:8
msgid "Sound      [mute]"
msgstr "Sonido[silenciad]"

# 
#: Marlin_main.cpp:4560
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Problema encontrado, nivelacion Z forzosa ..."

# MSG_SOUND_ONCE c=17 r=1
#: sound.h:6
msgid "Sound      [once]"
msgstr "Sonido  [una vez]"

# MSG_SOUND_SILENT c=17 r=1
#: sound.h:7
msgid "Sound    [silent]"
msgstr "Sonido[silencios]"

# MSG_SPEED
#: ultralcd.cpp:6199
msgid "Speed"
msgstr "Velocidad"

# MSG_SELFTEST_FAN_YES c=19
#: messages.c:76
msgid "Spinning"
msgstr "Ventilador girando"

# MSG_TEMP_CAL_WARNING c=20 r=4
#: Marlin_main.cpp:4065
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr "Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."

# MSG_STATISTICS
#: ultralcd.cpp:6108
msgid "Statistics  "
msgstr "Estadisticas "

# MSG_STOP_PRINT
#: messages.c:87
msgid "Stop print"
msgstr "Detener impresion"

# MSG_STOPPED
#: messages.c:88
msgid "STOPPED. "
msgstr "PARADA"

# MSG_SUPPORT
#: ultralcd.cpp:6117
msgid "Support"
msgstr "Soporte"

# MSG_SELFTEST_SWAPPED
#: ultralcd.cpp:7138
msgid "Swapped"
msgstr "Intercambiado"

# MSG_TEMP_CALIBRATION c=20 r=1
#: messages.c:89
msgid "Temp. cal.          "
msgstr "Cal. temp. "

# MSG_TEMP_CALIBRATION_ON c=20 r=1
#: ultralcd.cpp:5113
msgid "Temp. cal.   [on]"
msgstr "Cal. temp.   [ON]"

# MSG_TEMP_CALIBRATION_OFF c=20 r=1
#: ultralcd.cpp:5111
msgid "Temp. cal.  [off]"
msgstr "Cal. temp.  [OFF]"

# MSG_CALIBRATION_PINDA_MENU c=17 r=1
#: ultralcd.cpp:5209
msgid "Temp. calibration"
msgstr "Calibracion temp."

# MSG_TEMP_CAL_FAILED c=20 r=8
#: ultralcd.cpp:3744
msgid "Temperature calibration failed"
msgstr "Fallo de la calibracion de temperatura"

# MSG_TEMP_CALIBRATION_DONE c=20 r=12
#: messages.c:90
msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
msgstr "Calibracion temperatura terminada. Haz clic para continuar."

# MSG_TEMPERATURE
#: ultralcd.cpp:5089
msgid "Temperature"
msgstr "Temperatura"

# MSG_MENU_TEMPERATURES c=15 r=1
#: ultralcd.cpp:2273
msgid "Temperatures"
msgstr "Temperaturas"

# MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=4
#: messages.c:42
msgid "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "Todavia es necesario hacer una calibracion Z. Por favor siga el manual, capitulo Primeros pasos, seccion Calibracion del flujo."

# 
#: ultralcd.cpp:2752
msgid "Total filament"
msgstr "Filamento total:"

# 
#: ultralcd.cpp:2754
msgid "Total print time"
msgstr "Tiempo total :"

# MSG_TUNE
#: ultralcd.cpp:6015
msgid "Tune"
msgstr "Ajustar"

# 
#: ultralcd.cpp:4640
msgid "Unload"
msgstr "Descargar"

# 
#: ultralcd.cpp:5617
msgid "Unload all"
msgstr "Soltar todos fil."

# 
#: ultralcd.cpp:1994
msgid "Total failures"
msgstr ""

# 
#: ultralcd.cpp:2316
msgid "to load filament"
msgstr ""

# 
#: ultralcd.cpp:2317
msgid "to unload filament"
msgstr ""

# MSG_UNLOAD_FILAMENT c=17
#: messages.c:91
msgid "Unload filament"
msgstr "Soltar filamento"

# MSG_UNLOADING_FILAMENT c=20 r=1
#: messages.c:92
msgid "Unloading filament"
msgstr "Soltando filamento"

# 
#: ultralcd.cpp:1961
msgid "Total"
msgstr ""

# MSG_USED c=19 r=1
#: ultralcd.cpp:5334
msgid "Used during print"
msgstr "Usado en impresion"

# MSG_MENU_VOLTAGES c=15 r=1
#: ultralcd.cpp:2276
msgid "Voltages"
msgstr "Voltajes"

# 
#: ultralcd.cpp:2249
msgid "unknown"
msgstr ""

# MSG_USERWAIT
#: Marlin_main.cpp:4876
msgid "Wait for user..."
msgstr "Esperando ordenes"

# MSG_WAITING_TEMP c=20 r=3
#: ultralcd.cpp:3255
msgid "Waiting for nozzle and bed cooling"
msgstr "Esperando enfriamiento de la base y extrusor."

# MSG_WAITING_TEMP_PINDA c=20 r=3
#: ultralcd.cpp:3219
msgid "Waiting for PINDA probe cooling"
msgstr "Esperando a que se enfrie la sonda PINDA"

# 
#: ultralcd.cpp:4639
msgid "Use unload to remove filament 1 if it protrudes outside of the rear MMU tube. Use eject if it is hidden in tube."
msgstr "Usa unload para retirar el filamento 1 si sobresale por fuera de la parte trasera del tubo MMU. Usa Expulsar si esta escondido dentro del tubo"

# MSG_CHANGED_BOTH c=20 r=4
#: Marlin_main.cpp:1508
msgid "Warning: both printer type and motherboard type changed."
msgstr "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."

# MSG_CHANGED_MOTHERBOARD c=20 r=4
#: Marlin_main.cpp:1500
msgid "Warning: motherboard type changed."
msgstr "Cuidado: el tipo de placa ha cambiado."

# MSG_CHANGED_PRINTER c=20 r=4
#: Marlin_main.cpp:1504
msgid "Warning: printer type changed."
msgstr "Cuidado: Ha cambiado el tipo de impresora."

# MSG_UNLOAD_SUCCESSFUL c=20 r=2
#: Marlin_main.cpp:3014
msgid "Was filament unload successful?"
msgstr "?Se cargocon exito el filamento?"

# MSG_SELFTEST_WIRINGERROR
#: messages.c:80
msgid "Wiring error"
msgstr "Error de conexion"

# MSG_WIZARD c=17 r=1
#: ultralcd.cpp:5176
msgid "Wizard"
msgstr ""

# MSG_XYZ_DETAILS c=19 r=1
#: ultralcd.cpp:2265
msgid "XYZ cal. details"
msgstr "Detalles de calibracion XYZ"

# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: messages.c:19
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Calibracion XYZ fallada. Consulta el manual por favor."

# MSG_YES
#: messages.c:98
msgid "Yes"
msgstr "Si"

# MSG_WIZARD_QUIT c=20 r=8
#: messages.c:97
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "Siempre puedes acceder al asistente desde Calibracion -> Wizard"

# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ultralcd.cpp:3715
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."

# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ultralcd.cpp:3712
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"

# 
#: ultralcd.cpp:4885
msgid "X-correct"
msgstr "X-correcion"

# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ultralcd.cpp:3709
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"

# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ultralcd.cpp:3693
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."

# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ultralcd.cpp:3696
msgid "XYZ calibration compromised. Right front calibration point not reachable."
msgstr "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."

# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
#: ultralcd.cpp:3699
msgid "XYZ calibration compromised. Left front calibration point not reachable."
msgstr "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable."

# MSG_LOAD_ALL c=17
#: ultralcd.cpp:5575
msgid "Load all"
msgstr "Intr. todos fil."

# MSG_LOAD_FILAMENT_1 c=17
#: ultralcd.cpp:5576
msgid "Load filament 1"
msgstr "Introducir fil. 1"

# 
#: ultralcd.cpp:3675
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."

# 
#: ultralcd.cpp:3681
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr "Calibracion XYZ fallada. Puntos frontales no alcanzables."

# 
#: ultralcd.cpp:3687
msgid "XYZ calibration failed. Left front calibration point not reachable."
msgstr "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable."

# MSG_LOAD_FILAMENT_2 c=17
#: ultralcd.cpp:5577
msgid "Load filament 2"
msgstr "Introducir fil. 2"

# 
#: ultralcd.cpp:3684
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."

# MSG_LOAD_FILAMENT_3 c=17
#: ultralcd.cpp:5578
msgid "Load filament 3"
msgstr "Introducir fil. 3"

# 
#: ultralcd.cpp:2859
msgid "Y distance from min"
msgstr "Distancia en Y desde el min"

# 
#: ultralcd.cpp:4886
msgid "Y-correct"
msgstr "Y-correcion"

# MSG_LOAD_FILAMENT_4 c=17
#: ultralcd.cpp:5579
msgid "Load filament 4"
msgstr "Introducir fil. 4"

# MSG_LOAD_FILAMENT_5 c=17
#: ultralcd.cpp:5582
msgid "Load filament 5"
msgstr "Cargar filamento 5"